vhost code uses __GFP_REPEAT when allocating vhost_virtqueue resp.
vhost_vsock because it would really like to prefer kmalloc to the
vmalloc fallback - see 23cc5a99 ("vhost-net: extend device
allocation to vmalloc") for more context.  Michael Tsirkin has also
noted:

 "__GFP_REPEAT overhead is during allocation time. Using vmalloc means
  all accesses are slowed down. Allocation is not on data path, accesses
  are."

The similar applies to other vhost_kvzalloc users.

Let's teach kvmalloc_node to handle __GFP_REPEAT properly.  There are
two things to be careful about.  First we should prevent from the OOM
killer and so have to involve __GFP_NORETRY by default and secondly
override __GFP_REPEAT for !costly order requests as the __GFP_REPEAT is
ignored for !costly orders.

Supporting __GFP_REPEAT like semantic for !costly request is possible it
would require changes in the page allocator.  This is out of scope of
this patch.

This patch shouldn't introduce any functional change.

Link: http://lkml.kernel.org/r/20170306103032.2540-3-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "kvmalloc", v5.

There are many open coded kmalloc with vmalloc fallback instances in the
tree.  Most of them are not careful enough or simply do not care about
the underlying semantic of the kmalloc/page allocator which means that
a) some vmalloc fallbacks are basically unreachable because the kmalloc
part will keep retrying until it succeeds b) the page allocator can
invoke a really disruptive steps like the OOM killer to move forward
which doesn't sound appropriate when we consider that the vmalloc
fallback is available.

As it can be seen implementing kvmalloc requires quite an intimate
knowledge if the page allocator and the memory reclaim internals which
strongly suggests that a helper should be implemented in the memory
subsystem proper.

Most callers, I could find, have been converted to use the helper
instead.  This is patch 6.  There are some more relying on __GFP_REPEAT
in the networking stack which I have converted as well and Eric Dumazet
was not opposed [2] to convert them as well.

[1] http://lkml.kernel.org/r/20170130094940.13546-1-mhocko@kernel.org
[2] http://lkml.kernel.org/r/1485273626.16328.301.camel@edumazet-glaptop3.roam.corp.google.com

This patch (of 9):

Using kmalloc with the vmalloc fallback for larger allocations is a
common pattern in the kernel code.  Yet we do not have any common helper
for that and so users have invented their own helpers.  Some of them are
really creative when doing so.  Let's just add kv[mz]alloc and make sure
it is implemented properly.  This implementation makes sure to not make
a large memory pressure for > PAGE_SZE requests (__GFP_NORETRY) and also
to not warn about allocation failures.  This also rules out the OOM
killer as the vmalloc is a more approapriate fallback than a disruptive
user visible action.

This patch also changes some existing users and removes helpers which
are specific for them.  In some cases this is not possible (e.g.
ext4_kvmalloc, libcfs_kvzalloc) because those seems to be broken and
require GFP_NO{FS,IO} context which is not vmalloc compatible in general
(note that the page table allocation is GFP_KERNEL).  Those need to be
fixed separately.

While we are at it, document that __vmalloc{_node} about unsupported gfp
mask because there seems to be a lot of confusion out there.
kvmalloc_node will warn about GFP_KERNEL incompatible (which are not
superset) flags to catch new abusers.  Existing ones would have to die
slowly.

[sfr@canb.auug.org.au: f2fs fixup]
  Link: http://lkml.kernel.org/r/20170320163735.332e64b7@canb.auug.org.au
Link: http://lkml.kernel.org/r/20170306103032.2540-2-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: Andreas Dilger <adilger@dilger.ca>	[ext4 part]
Acked-by: NVlastimil Babka <vbabka@suse.cz>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

c2port_device_register() never returns NULL, it uses error pointers.

Link: http://lkml.kernel.org/r/20170412083321.GC3250@mwanda
Fixes: 65131cd5 ("c2port: add c2port support for Eurotech Duramar 2150")
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NRodolfo Giometti <giometti@linux.it>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The "DIV_ROUND_UP(size, PAGE_SIZE)" operation can overflow if "size" is
more than ULLONG_MAX - PAGE_SIZE.

Link: http://lkml.kernel.org/r/20170322111950.GA11279@mwandaSigned-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Moving from get_user_pages() to get_user_pages_unlocked() simplifies the
code and takes advantage of VM_FAULT_RETRY functionality when faulting
in pages.

Link: http://lkml.kernel.org/r/20161101194332.23961-1-lstoakes@gmail.comSigned-off-by: NLorenzo Stoakes <lstoakes@gmail.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Kumar Gala <galak@kernel.crashing.org>
Cc: Mihai Caraman <mihai.caraman@freescale.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Otherwise it is possible to trigger crashes due to the metadata being
inaccessible yet these methods don't safely account for that possibility
without these checks.

Cc: stable@vger.kernel.org
Reported-by: NMikulas Patocka <mpatocka@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Fix failures to create namespaces due to the vmem_altmap not advertising
enough free space to store the memmap.

 WARNING: CPU: 15 PID: 8022 at arch/x86/mm/init_64.c:656 arch_add_memory+0xde/0xf0
 [..]
 Call Trace:
  dump_stack+0x63/0x83
  __warn+0xcb/0xf0
  warn_slowpath_null+0x1d/0x20
  arch_add_memory+0xde/0xf0
  devm_memremap_pages+0x244/0x440
  pmem_attach_disk+0x37e/0x490 [nd_pmem]
  nd_pmem_probe+0x7e/0xa0 [nd_pmem]
  nvdimm_bus_probe+0x71/0x120 [libnvdimm]
  driver_probe_device+0x2bb/0x460
  bind_store+0x114/0x160
  drv_attr_store+0x25/0x30

In commit 658922e5 "libnvdimm, pfn: fix memmap reservation sizing"
we arranged for the capacity to be allocated, but failed to also update
the 'npfns' parameter. This leads to cases where there is enough
capacity reserved to hold all the allocated sections, but
vmemmap_populate_hugepages() still encounters -ENOMEM from
altmap_alloc_block_buf().

This fix is a stop-gap until we can teach the core memory hotplug
implementation to permit sub-section hotplug.

Cc: <stable@vger.kernel.org>
Fixes: 658922e5 ("libnvdimm, pfn: fix memmap reservation sizing")
Reported-by: NAnisha Allada <anisha.allada@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Per the latest version of the "NVDIMM DSM Interface Example" [1], the
label data retrieval routine can report a "locked" status. In this case
all regions associated with that DIMM are disabled until the label area
is unlocked. Provide generic libnvdimm enabling for NVDIMMs with label
data area locking capabilities.

[1]: http://pmem.io/documents/Signed-off-by: NDan Williams <dan.j.williams@intel.com>

This is a preparation patch for handling locked nvdimm label regions, a
new concept as introduced by the latest DSM document on pmem.io [1]. A
future patch will leverage nvdimm_set_locked() at DIMM probe time to
flag regions that can not be enabled. There should be no functional
difference resulting from this change.

[1]: http://pmem.io/documents/NVDIMM_DSM_Interface_Example-V1.3.pdfSigned-off-by: NDan Williams <dan.j.williams@intel.com>

sparse generates the following warnings in drivers/of/:

../drivers/of/fdt.c:63:36: warning: cast to restricted __be32
../drivers/of/fdt.c:68:33: warning: cast to restricted __be32
../drivers/of/irq.c:105:88: warning: incorrect type in initializer (different base types)
../drivers/of/irq.c:105:88:    expected restricted __be32
../drivers/of/irq.c:105:88:    got int
../drivers/of/irq.c:526:35: warning: incorrect type in assignment (different modifiers)
../drivers/of/irq.c:526:35:    expected int ( *const [usertype] irq_init_cb )( ... )
../drivers/of/irq.c:526:35:    got void const *const data
../drivers/of/of_reserved_mem.c:200:50: warning: incorrect type in initializer (different modifiers)
../drivers/of/of_reserved_mem.c:200:50:    expected int ( *[usertype] initfn )( ... )
../drivers/of/of_reserved_mem.c:200:50:    got void const *const data
../drivers/of/resolver.c:95:42: warning: incorrect type in assignment (different base types)
../drivers/of/resolver.c:95:42:    expected unsigned int [unsigned] [usertype] <noident>
../drivers/of/resolver.c:95:42:    got restricted __be32 [usertype] <noident>

All these are harmless type mismatches fixed by adjusting the types.
Signed-off-by: NRob Herring <robh@kernel.org>

sparse gives the following warning for 'pci_space':

../drivers/of/address.c:266:26: warning: incorrect type in assignment (different base types)
../drivers/of/address.c:266:26:    expected unsigned int [unsigned] [usertype] pci_space
../drivers/of/address.c:266:26:    got restricted __be32 const [usertype] <noident>

It appears that pci_space is only ever accessed on powerpc, so the endian
swap is often not needed.

Cc: stable@vger.kernel.org
Signed-off-by: NRob Herring <robh@kernel.org>

sparse gives a warning that 'handle' is not a __be32:

../drivers/of/base.c:2261:61: warning: incorrect type in argument 1 (different base types)
../drivers/of/base.c:2261:61:    expected restricted __be32 const [usertype] *p
../drivers/of/base.c:2261:61:    got unsigned int const [usertype] *[assigned] handle

We could just change the type, but the code can be improved by using
of_parse_phandle instead of open coding it with of_get_property and
of_find_node_by_phandle.
Signed-off-by: NRob Herring <robh@kernel.org>

Fail the configuration of advertised speed-autoneg value if the config
update is not supported.
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Driver currently uses advertised-autoneg value to populate the
supported-autoneg field. When advertised field is updated, user gets
the same value for supported field. Supported-autoneg value need to be
populated from the link capabilities value returned by the MFW.
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Value for status block id could be more than 256 in 100G mode, need to
update its data type from u8 to u16.
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NYuval Mintz <Yuval.Mintz@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Static checkers complain that we should unlock before returning.  Which
is true.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: NFrank Rowand <frank.rowand@sony.com>
Signed-off-by: NRob Herring <robh@kernel.org>

This fixes a race where vmbus callback for new packet arriving
could occur before NAPI is initialized.
Signed-off-by: NStephen Hemminger <sthemmin@microsoft.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

V2: using "aquantia" subsystem tag.

The command "ethtool -i ethX" should display driver name (driver: atlantic)
instead vendor name (driver: aquantia).
Signed-off-by: NPavel Belous <pavel.belous@aquantia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMike Snitzer <snitzer@redhat.com>
Signed-off-by: NMilan Broz <gmazyland@gmail.com>

Since netif_carrier_on() will do nothing if device's
carrier is already on, so it's unnecessary to do
carrier status check.

It's the same for netif_carrier_off().
Signed-off-by: NZhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Depending on the passed @idle arg, there may be no need to calculate
'nr_free' or 'nr_clean' respectively in free_target_met() and
clean_target_met().
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

dm-cache's smq policy tries hard to do it's work during the idle periods
when there is no IO.  But if there are no idle periods (eg, a long fio
run) we still need to allow some demotions and promotions to occur.

To achieve this, pass @idle=true to queue_promotion()'s
free_target_met() call so that free_target_met() doesn't short-circuit
the possibility of demotion simply because it isn't an idle period.

Fixes: b29d4986 ("dm cache: significant rework to leverage dm-bio-prison-v2")
Reported-by: NJohn Harrigan <jharriga@redhat.com>
Signed-off-by: NJoe Thornber <ejt@redhat.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Free memory correctly when an allocation fails on a loop and we free
backwards previously successful allocations.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NMatias Bjørling <matias@cnexlabs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

Create nvme command before allocating a request using
nvme_alloc_request, which uses the command direction. Up until now, the
command has been zeroized, so all commands have been allocated as a
read operation.
Signed-off-by: NJavier González <javier@cnexlabs.com>
Reviewed-by: NMatias Bjørling <matias@cnexlabs.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NJens Axboe <axboe@fb.com>

In page_same_filled function, all elements in the page is compared with
next index value.  The current comparison routine compares the (i)th and
(i+1)th values of the page.

In this case, two load operaions occur for each comparison.  But if we
store first value of the page stores at 'val' variable and using it to
compare with others, the load opearation is reduced.  It reduce load
operation per page by up to 64times.

Link: http://lkml.kernel.org/r/1488428104-7257-1-git-send-email-sangwoo2.park@lge.comSigned-off-by: NSangwoo Park <sangwoo2.park@lge.com>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: NMinchan Kim <minchan@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The zram_free_page already handles NULL handle case and same page so use
it to reduce error probability.  (Acutaully, I made a mistake when I
handled same page feature)

Link: http://lkml.kernel.org/r/1492052365-16169-7-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With element, sometime I got confused handle and element access.  It
might be my bad but I think it's time to introduce accessor to prevent
future idiot like me.  This patch is just clean-up patch so it shouldn't
change any behavior.

Link: http://lkml.kernel.org/r/1492052365-16169-6-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's redundant now.  Instead, remove it and use zram structure directly.

Link: http://lkml.kernel.org/r/1492052365-16169-5-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With this clean-up phase, I want to use zram's wrapper function to lock
table access which is more consistent with other zram's functions.

Link: http://lkml.kernel.org/r/1492052365-16169-4-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

For architecture(PAGE_SIZE > 4K), zram have supported partial IO.
However, the mixed code for handling normal/partial IO is too mess,
error-prone to modify IO handler functions with upcoming feature so this
patch aims for cleaning up zram's IO handling functions.

Link: http://lkml.kernel.org/r/1492052365-16169-3-git-send-email-minchan@kernel.orgSigned-off-by: NMinchan Kim <minchan@kernel.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Patch series "zram clean up", v2.

This patchset aims to clean up zram .

[1] clean up multiple pages's bvec handling.
[2] clean up partial IO handling
[3-6] clean up zram via using accessor and removing pointless structure.

With [2-6] applied, we can get a few hundred bytes as well as huge
readibility enhance.

x86: 708 byte save

    add/remove: 1/1 grow/shrink: 0/11 up/down: 478/-1186 (-708)
    function                                     old     new   delta
    zram_special_page_read                         -     478    +478
    zram_reset_device                            317     314      -3
    mem_used_max_store                           131     128      -3
    compact_store                                 96      93      -3
    mm_stat_show                                 203     197      -6
    zram_add                                     719     712      -7
    zram_slot_free_notify                        229     214     -15
    zram_make_request                            819     803     -16
    zram_meta_free                               128     111     -17
    zram_free_page                               180     151     -29
    disksize_store                               432     361     -71
    zram_decompress_page.isra                    504       -    -504
    zram_bvec_rw                                2592    2080    -512
    Total: Before=25350773, After=25350065, chg -0.00%

ppc64: 231 byte save

    add/remove: 2/0 grow/shrink: 1/9 up/down: 681/-912 (-231)
    function                                     old     new   delta
    zram_special_page_read                         -     480    +480
    zram_slot_lock                                 -     200    +200
    vermagic                                      39      40      +1
    mm_stat_show                                 256     248      -8
    zram_meta_free                               200     184     -16
    zram_add                                     944     912     -32
    zram_free_page                               348     308     -40
    disksize_store                               572     492     -80
    zram_decompress_page                         664     564    -100
    zram_slot_free_notify                        292     160    -132
    zram_make_request                           1132    1000    -132
    zram_bvec_rw                                2768    2396    -372
    Total: Before=17565825, After=17565594, chg -0.00%

This patch (of 6):

Johannes Thumshirn reported system goes the panic when using NVMe over
Fabrics loopback target with zram.

The reason is zram expects each bvec in bio contains a single page
but nvme can attach a huge bulk of pages attached to the bio's bvec
so that zram's index arithmetic could be wrong so that out-of-bound
access makes system panic.

[1] in mainline solved solved the problem by limiting max_sectors with
SECTORS_PER_PAGE but it makes zram slow because bio should split with
each pages so this patch makes zram aware of multiple pages in a bvec
so it could solve without any regression(ie, bio split).

[1] 0bc31538, zram: set physical queue limits to avoid array out of
    bounds accesses

Link: http://lkml.kernel.org/r/20170413134057.GA27499@bboxSigned-off-by: NMinchan Kim <minchan@kernel.org>
Reported-by: NJohannes Thumshirn <jthumshirn@suse.de>
Tested-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NSergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Hannes Reinecke <hare@suse.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Tetsuo has reported that sysrq triggered OOM killer will print a
misleading information when no tasks are selected:

  sysrq: SysRq : Manual OOM execution
  Out of memory: Kill process 4468 ((agetty)) score 0 or sacrifice child
  Killed process 4468 ((agetty)) total-vm:43704kB, anon-rss:1760kB, file-rss:0kB, shmem-rss:0kB
  sysrq: SysRq : Manual OOM execution
  Out of memory: Kill process 4469 (systemd-cgroups) score 0 or sacrifice child
  Killed process 4469 (systemd-cgroups) total-vm:10704kB, anon-rss:120kB, file-rss:0kB, shmem-rss:0kB
  sysrq: SysRq : Manual OOM execution
  sysrq: OOM request ignored because killer is disabled
  sysrq: SysRq : Manual OOM execution
  sysrq: OOM request ignored because killer is disabled
  sysrq: SysRq : Manual OOM execution
  sysrq: OOM request ignored because killer is disabled

The real reason is that there are no eligible tasks for the OOM killer
to select but since commit 7c5f64f8 ("mm: oom: deduplicate victim
selection code for memcg and global oom") the semantic of out_of_memory
has changed without updating moom_callback.

This patch updates moom_callback to tell that no task was eligible which
is the case for both oom killer disabled and no eligible tasks.  In
order to help distinguish first case from the second add printk to both
oom_killer_{enable,disable}.  This information is useful on its own
because it might help debugging potential memory allocation failures.

Fixes: 7c5f64f8 ("mm: oom: deduplicate victim selection code for memcg and global oom")
Link: http://lkml.kernel.org/r/20170404134705.6361-1-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com>
Reported-by: NTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

commit 1647b9b9 "brd: add dax_operations support" introduced the allocation
and freeing of a dax_device, but the allocated dax_device is not stored
into the brd_device, so brd_del_one() will eventually operate on an
uninitialized brd->dax_dev.

Fix this by storing the allocated dax_device to brd->dax_dev.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>

Restart of the subqueue should occur outside of the loop processing
any tx buffers instead of doing this in the middle of the loop.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Map each RX SKB to the RX queue associated with the driver's RX SCRQ.
This should improve the RX CPU load balancing issues seen by the
performance team.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is not a need to stop processing skbs if we encounter a
skb that has a receive completion error.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move the check for the driver resetting to the first thing
in ibmvnic_xmit().
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When closing the ibmvnic driver we need to wait for any pending
sub crq entries to ensure they are handled.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When closing the ibmvnic driver, most notably during the reset
path, the tx pools need to be cleaned to ensure there are no
hanging skbs that need to be free'ed.

The need for this was found during debugging a loss of network
traffic after handling a driver reset. The underlying cause was
some skbs in the tx pool that were never free'ed. As a
result the upper network layers never tried a re-send since it
believed the driver still had the skb.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>