The following execution path is possible:

  fsnotify()
    [ realign the stack and store previous SP in R10 ]
    <IRQ>
      [ only IRET regs saved ]
      common_interrupt()
        interrupt_entry()
	  <NMI>
	    [ full pt_regs saved ]
	    ...
	    [ unwind stack ]

When the unwinder goes through the NMI and the IRQ on the stack, and
then sees fsnotify(), it doesn't have access to the value of R10,
because it only has the five IRET registers.  So the unwind stops
prematurely.

However, because the interrupt_entry() code is careful not to clobber
R10 before saving the full regs, the unwinder should be able to read R10
from the previously saved full pt_regs associated with the NMI.

Handle this case properly.  When encountering an IRET regs frame
immediately after a full pt_regs frame, use the pt_regs as a backup
which can be used to get the C register values.

Also, note that a call frame resets the 'prev_regs' value, because a
function is free to clobber the registers.  For this fix to work, the
IRET and full regs frames must be adjacent, with no FUNC frames in
between.  So replace the FUNC hint in interrupt_entry() with an
IRET_REGS hint.

Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder")
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/97a408167cc09f1cfa0de31a7b70dd88868d743f.1587808742.git.jpoimboe@redhat.com

If the ORC entry type is unknown, nothing else can be done other than
reporting an error.  Exit the function instead of breaking out of the
switch statement.

Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder")
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/a7fa668ca6eabbe81ab18b2424f15adbbfdc810a.1587808742.git.jpoimboe@redhat.com

If the unwinder is called before the ORC data has been initialized,
orc_find() returns NULL, and it tries to fall back to using frame
pointers.  This can cause some unexpected warnings during boot.

Move the 'orc_init' check from orc_find() to __unwind_init(), so that it
doesn't even try to unwind from an uninitialized state.

Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder")
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/069d1499ad606d85532eb32ce39b2441679667d5.1587808742.git.jpoimboe@redhat.com

When unwinding an inactive task, the ORC unwinder skips the first frame
by default.  If both the 'regs' and 'first_frame' parameters of
unwind_start() are NULL, 'state->sp' and 'first_frame' are later
initialized to the same value for an inactive task.  Given there is a
"less than or equal to" comparison used at the end of __unwind_start()
for skipping stack frames, the first frame is skipped.

Drop the equal part of the comparison and make the behavior equivalent
to the frame pointer unwinder.

Fixes: ee9f8fce ("x86/unwind: Add the ORC unwinder")
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/7f08db872ab59e807016910acdbe82f744de7065.1587808742.git.jpoimboe@redhat.com

There's some daring kernel code out there which dumps the stack of
another task without first making sure the task is inactive.  If the
task happens to be running while the unwinder is reading the stack,
unusual unwinder warnings can result.

There's no race-free way for the unwinder to know whether such a warning
is legitimate, so just disable unwinder warnings for all non-current
tasks.
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/ec424a2aea1d461eb30cab48a28c6433de2ab784.1587808742.git.jpoimboe@redhat.com

These variables aren't used outside of unwind_orc.c, make them static.

Also annotate some of them with '__ro_after_init', as applicable.
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/43ae310bf7822b9862e571f36ae3474cfde8f301.1587808742.git.jpoimboe@redhat.com

The LEAQ instruction in rewind_stack_do_exit() moves the stack pointer
directly below the pt_regs at the top of the task stack before calling
do_exit(). Tell the unwinder to expect pt_regs.

Fixes: 8c1f7558 ("x86/entry/64: Add unwind hint annotations")
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJann Horn <jannh@google.com>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/68c33e17ae5963854916a46f522624f8e1d264f2.1587808742.git.jpoimboe@redhat.com

UNWIND_HINT_FUNC has some limitations: specifically, it doesn't reset
all the registers to undefined.  This causes objtool to get confused
about the RBP push in __switch_to_asm(), resulting in bad ORC data.

While __switch_to_asm() does do some stack magic, it's otherwise a
normal callable-from-C function, so just annotate it as a function,
which makes objtool happy and allows it to produces the correct hints
automatically.

Fixes: 8c1f7558 ("x86/entry/64: Add unwind hint annotations")
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/03d0411920d10f7418f2e909210d8e9a3b2ab081.1587808742.git.jpoimboe@redhat.com

In swapgs_restore_regs_and_return_to_usermode, after the stack is
switched to the trampoline stack, the existing UNWIND_HINT_REGS hint is
no longer valid, which can result in the following ORC unwinder warning:

  WARNING: can't dereference registers at 000000003aeb0cdd for ip swapgs_restore_regs_and_return_to_usermode+0x93/0xa0

For full correctness, we could try to add complicated unwind hints so
the unwinder could continue to find the registers, but when when it's
this close to kernel exit, unwind hints aren't really needed anymore and
it's fine to just use an empty hint which tells the unwinder to stop.

For consistency, also move the UNWIND_HINT_EMPTY in
entry_SYSCALL_64_after_hwframe to a similar location.

Fixes: 3e3b9293 ("x86/entry/64: Return to userspace from the trampoline stack")
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Reported-by: NDave Jones <dsj@fb.com>
Reported-by: NDr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: NJoe Mario <jmario@redhat.com>
Reported-by: NJann Horn <jannh@google.com>
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/60ea8f562987ed2d9ace2977502fe481c0d7c9a0.1587808742.git.jpoimboe@redhat.com

The PUSH_AND_CLEAR_REGS macro zeroes each register immediately after
pushing it.  If an NMI or exception hits after a register is cleared,
but before the UNWIND_HINT_REGS annotation, the ORC unwinder will
wrongly think the previous value of the register was zero.  This can
confuse the unwinding process and cause it to exit early.

Because ORC is simpler than DWARF, there are a limited number of unwind
annotation states, so it's not possible to add an individual unwind hint
after each push/clear combination.  Instead, the register clearing
instructions need to be consolidated and moved to after the
UNWIND_HINT_REGS annotation.

Fixes: 3f01daec ("x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro")
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/68fd3d0bc92ae2d62ff7879d15d3684217d51f08.1587808742.git.jpoimboe@redhat.com

When the current frame address (CFA) is stored on the stack (i.e.,
cfa->base == CFI_SP_INDIRECT), objtool neglects to adjust the stack
offset when there are subsequent pushes or pops.  This results in bad
ORC data at the end of the ENTER_IRQ_STACK macro, when it puts the
previous stack pointer on the stack and does a subsequent push.

This fixes the following unwinder warning:

  WARNING: can't dereference registers at 00000000f0a6bdba for ip interrupt_entry+0x9f/0xa0

Fixes: 627fce14 ("objtool: Add ORC unwind table generation")
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Reported-by: NDave Jones <dsj@fb.com>
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Reported-by: NVegard Nossum <vegard.nossum@oracle.com>
Reported-by: NJoe Mario <jmario@redhat.com>
Reviewed-by: NMiroslav Benes <mbenes@suse.cz>
Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/853d5d691b29e250333332f09b8e27410b2d9924.1587808742.git.jpoimboe@redhat.com

Pull networking fixes from David Miller:

 1) Fix memory leak in netfilter flowtable, from Roi Dayan.

 2) Ref-count leaks in netrom and tipc, from Xiyu Yang.

 3) Fix warning when mptcp socket is never accepted before close, from
    Florian Westphal.

 4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.

 5) Fix large delays during PTP synchornization in cxgb4, from Rahul
    Lakkireddy.

 6) team_mode_get() can hang, from Taehee Yoo.

 7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
    from Niklas Schnelle.

 8) Fix handling of bpf XADD on BTF memory, from Jann Horn.

 9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.

10) Missing queue memory release in iwlwifi pcie code, from Johannes
    Berg.

11) Fix NULL deref in macvlan device event, from Taehee Yoo.

12) Initialize lan87xx phy correctly, from Yuiko Oshino.

13) Fix looping between VRF and XFRM lookups, from David Ahern.

14) etf packet scheduler assumes all sockets are full sockets, which is
    not necessarily true. From Eric Dumazet.

15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.

16) fib_select_default() needs to handle nexthop objects, from David
    Ahern.

17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.

18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.

19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.

20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
    from Luke Nelson.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
  selftests/bpf: Fix a couple of broken test_btf cases
  tools/runqslower: Ensure own vmlinux.h is picked up first
  bpf: Make bpf_link_fops static
  bpftool: Respect the -d option in struct_ops cmd
  selftests/bpf: Add test for freplace program with expected_attach_type
  bpf: Propagate expected_attach_type when verifying freplace programs
  bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
  bpf, x86_32: Fix logic error in BPF_LDX zero-extension
  bpf, x86_32: Fix clobbering of dst for BPF_JSET
  bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
  bpf: Fix reStructuredText markup
  net: systemport: suppress warnings on failed Rx SKB allocations
  net: bcmgenet: suppress warnings on failed Rx SKB allocations
  macsec: avoid to set wrong mtu
  mac80211: sta_info: Add lockdep condition for RCU list usage
  mac80211: populate debugfs only after cfg80211 init
  net: bcmgenet: correct per TX/RX ring statistics
  net: meth: remove spurious copyright text
  net: phy: bcm84881: clear settings on link down
  chcr: Fix CPU hard lockup
  ...

Alexei Starovoitov says:

====================
pull-request: bpf 2020-04-24

The following pull-request contains BPF updates for your *net* tree.

We've added 17 non-merge commits during the last 5 day(s) which contain
a total of 19 files changed, 203 insertions(+), 85 deletions(-).

The main changes are:

1) link_update fix, from Andrii.

2) libbpf get_xdp_id fix, from David.

3) xadd verifier fix, from Jann.

4) x86-32 JIT fixes, from Luke and Wang.

5) test_btf fix, from Stanislav.

6) freplace verifier fix, from Toke.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 51c39bb1 ("bpf: Introduce function-by-function verification")
introduced function linkage flag and changed the error message from
"vlen != 0" to "Invalid func linkage" and broke some fake BPF programs.

Adjust the test accordingly.

AFACT, the programs don't really need any arguments and only look
at BTF for maps, so let's drop the args altogether.

Before:
BTF raw test[103] (func (Non zero vlen)): do_test_raw:3703:FAIL expected
err_str:vlen != 0
magic: 0xeb9f
version: 1
flags: 0x0
hdr_len: 24
type_off: 0
type_len: 72
str_off: 72
str_len: 10
btf_total_size: 106
[1] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=SIGNED
[2] INT (anon) size=4 bits_offset=0 nr_bits=32 encoding=(none)
[3] FUNC_PROTO (anon) return=0 args=(1 a, 2 b)
[4] FUNC func type_id=3 Invalid func linkage

BTF libbpf test[1] (test_btf_haskv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_haskv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[2] (test_btf_newkv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_newkv.o'
do_test_file:4201:FAIL bpf_object__load: -4007
BTF libbpf test[3] (test_btf_nokv.o): libbpf: load bpf program failed:
Invalid argument
libbpf: -- BEGIN DUMP LOG ---
libbpf:
Validating test_long_fname_2() func#1...
Arg#0 type PTR in test_long_fname_2() is not supported yet.
processed 0 insns (limit 1000000) max_states_per_insn 0 total_states 0
peak_states 0 mark_read 0

libbpf: -- END LOG --
libbpf: failed to load program 'dummy_tracepoint'
libbpf: failed to load object 'test_btf_nokv.o'
do_test_file:4201:FAIL bpf_object__load: -4007

Fixes: 51c39bb1 ("bpf: Introduce function-by-function verification")
Signed-off-by: NStanislav Fomichev <sdf@google.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422003753.124921-1-sdf@google.com

Reorder include paths to ensure that runqslower sources are picking up
vmlinux.h, generated by runqslower's own Makefile. When runqslower is built
from selftests/bpf, due to current -I$(BPF_INCLUDE) -I$(OUTPUT) ordering, it
might pick up not-yet-complete vmlinux.h, generated by selftests Makefile,
which could lead to compilation errors like [0]. So ensure that -I$(OUTPUT)
goes first and rely on runqslower's Makefile own dependency chain to ensure
vmlinux.h is properly completed before source code relying on it is compiled.

  [0] https://travis-ci.org/github/libbpf/libbpf/jobs/677905925Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200422012407.176303-1-andriin@fb.com

Fix the following sparse warning:

kernel/bpf/syscall.c:2289:30: warning: symbol 'bpf_link_fops' was not declared. Should it be static?
Reported-by: NHulk Robot <hulkci@huawei.com>
Signed-off-by: NZou Wei <zou_wei@huawei.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/1587609160-117806-1-git-send-email-zou_wei@huawei.com

In the prog cmd, the "-d" option turns on the verifier log.
This is missed in the "struct_ops" cmd and this patch fixes it.

Fixes: 65c93628 ("bpftool: Add struct_ops support")
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200424182911.1259355-1-kafai@fb.com

This adds a new selftest that tests the ability to attach an freplace
program to a program type that relies on the expected_attach_type of the
target program to pass verification.
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526831.293902.16011743438619684815.stgit@toke.dk

For some program types, the verifier relies on the expected_attach_type of
the program being verified in the verification process. However, for
freplace programs, the attach type was not propagated along with the
verifier ops, so the expected_attach_type would always be zero for freplace
programs.

This in turn caused the verifier to sometimes make the wrong call for
freplace programs. For all existing uses of expected_attach_type for this
purpose, the result of this was only false negatives (i.e., freplace
functions would be rejected by the verifier even though they were valid
programs for the target they were replacing). However, should a false
positive be introduced, this can lead to out-of-bounds accesses and/or
crashes.

The fix introduced in this patch is to propagate the expected_attach_type
to the freplace program during verification, and reset it after that is
done.

Fixes: be8704ff ("bpf: Introduce dynamic program extensions")
Signed-off-by: NToke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158773526726.293902.13257293296560360508.stgit@toke.dk

Fix bug of not putting bpf_link in LINK_UPDATE command.
Also enforce zeroed old_prog_fd if no BPF_F_REPLACE flag is specified.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200424052045.4002963-1-andriin@fb.com

When verifier_zext is true, we don't need to emit code
for zero-extension.

Fixes: 836256bf ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: NWang YanQing <udknight@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight

The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.

This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.

This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.

Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NLuke Nelson <luke.r.nels@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NWang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com

The current JIT uses the following sequence to zero-extend into the
upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W},
when the destination register is not on the stack:

  EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);

The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte
immediate; the current code emits only 1 byte of the immediate. This
means that the first 3 bytes of the next instruction will be treated as
the rest of the immediate, breaking the stream of instructions.

This patch fixes the problem by instead emitting "xor dst_hi,dst_hi"
to clear the upper 32 bits. This fixes the problem and is more efficient
than using MOV to load a zero immediate.

This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way, and the verifier implements a zero-extension optimization. But the
JIT should avoid emitting incorrect encodings regardless.

Fixes: 03f5781b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: NXi Wang <xi.wang@gmail.com>
Signed-off-by: NLuke Nelson <luke.r.nels@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Reviewed-by: NH. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: NWang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com

The patch fixes:
$ scripts/bpf_helpers_doc.py > bpf-helpers.rst
$ rst2man bpf-helpers.rst > bpf-helpers.7
bpf-helpers.rst:1105: (WARNING/2) Inline strong start-string without end-string.
Signed-off-by: NJakub Wilk <jwilk@jwilk.net>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Reviewed-by: NQuentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20200422082324.2030-1-jwilk@jwilk.net

The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.

However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.

This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver is designed to drop Rx packets and reclaim the buffers
when an allocation fails, and the network interface needs to safely
handle this packet loss. Therefore, an allocation failure of Rx
SKBs is relatively benign.

However, the output of the warning message occurs with a high
scheduling priority that can cause excessive jitter/latency for
other high priority processing.

This commit suppresses the warning messages to prevent scheduling
problems while retaining the failure count in the statistics of
the network interface.
Signed-off-by: NDoug Berger <opendmb@gmail.com>
Acked-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When a macsec interface is created, the mtu is calculated with the lower
interface's mtu value.
If the mtu of lower interface is lower than the length, which is needed
by macsec interface, macsec's mtu value will be overflowed.
So, if the lower interface's mtu is too low, macsec interface's mtu
should be set to 0.

Test commands:
    ip link add dummy0 mtu 10 type dummy
    ip link add macsec0 link dummy0 type macsec
    ip link show macsec0

Before:
    11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 4294967274
After:
    11: macsec0@dummy0: <BROADCAST,MULTICAST,M-DOWN> mtu 0

Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver")
Signed-off-by: NTaehee Yoo <ap420073@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull SCSI fixes from James Bottomley:
 "Two minor fixes: one to update a Kconfig reference and the other to
  fix a resource leak on an error path in sg"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: Update referenced link to cdrtools
  scsi: sg: add sg_remove_request in sg_write

Pull power management fixes from Rafael Wysocki:
 "Restore an optimization related to asynchronous suspend and resume of
  devices during system-wide power transitions that was disabled by
  mistake (Kai-Heng Feng) and update the pm-graph suite of power
  management utilities (Todd Brandt)"

* tag 'pm-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM: sleep: core: Switch back to async_schedule_dev()
  pm-graph v5.6

Pull PNP cleanup from Rafael Wysocki:
 "Make the PNP code use list_for_each_entry() in a few places instead of
  open-coding it (Jason Gunthorpe)"

* tag 'pnp-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  pnp: Use list_for_each_entry() instead of open coding

Pull ACPI fixes from Rafael Wysocki:
 "Drop a lid status quirk for Asus T200TA that is not necessary any more
  and clean up a resource management inconsistency in the PCI IRQ link
  configuration code.

  Both changes from Hans de Goede"

* tag 'acpi-5.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: button: Drop no longer necessary Asus T200TA lid_init_state quirk
  ACPI/PCI: pci_link: use extended_irq union member when setting ext-irq shareable

IORING_OP_MADVISE can end up basically doing mprotect() on the VM of
another process, which means that it can race with our crazy core dump
handling which accesses the VM state without holding the mmap_sem
(because it incorrectly thinks that it is the final user).

This is clearly a core dumping problem, but we've never fixed it the
right way, and instead have the notion of "check that the mm is still
ok" using mmget_still_valid() after getting the mmap_sem for writing in
any situation where we're not the original VM thread.

See commit 04f5866e ("coredump: fix race condition between
mmget_not_zero()/get_task_mm() and core dumping") for more background on
this whole mmget_still_valid() thing.  You might want to have a barf bag
handy when you do.

We're discussing just fixing this properly in the only remaining core
dumping routines.  But even if we do that, let's make do_madvise() do
the right thing, and then when we fix core dumping, we can remove all
these mmget_still_valid() checks.
Reported-and-tested-by: NJann Horn <jannh@google.com>
Fixes: c1ca757b ("io_uring: add IORING_OP_MADVISE")
Acked-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge tag 'mac80211-for-net-2020-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just three changes:
 * fix a wrong GFP_KERNEL in hwsim
 * fix the debugfs mess after the mac80211 registration race fix
 * suppress false-positive RCU list lockdep warnings
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-2020-04-24' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for v5.7

Second set of fixes for v5.7. Quite a few iwlwifi fixes and some
maintainers file updates.

iwlwifi

* fix a bug with kmemdup() error handling

* fix a DMA pool warning about unfreed memory

* fix beacon statistics

* fix a theoritical bug in device initialisation

* fix queue limit handling and inactive TID removal

* disable ACK Enabled Aggregation which was enabled by accident

* fix transmit power setting reading from BIOS with certain versions
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pull io_uring fix from Jens Axboe:
 "Single fixup for a change that went into -rc2"

* tag 'io_uring-5.7-2020-04-24' of git://git.kernel.dk/linux-block:
  io_uring: only restore req->work for req that needs do completion

Pull libata fixlet from Jens Axboe:
 "Minor spelling error fix for libata"

* tag 'libata-5.7-2020-04-24' of git://git.kernel.dk/linux-block:
  ata: sata_inic162x fix a spelling issue

Pull block fixes from Jens Axboe:
 "A few fixes/changes that should go into this release:

   - null_blk zoned fixes (Damien)

   - blkdev_close() sync improvement (Douglas)

   - Fix regression in blk-iocost that impacted (at least) systemtap
     (Waiman)

   - Comment fix, header removal (Zhiqiang, Jianpeng)"

* tag 'block-5.7-2020-04-24' of git://git.kernel.dk/linux-block:
  null_blk: Cleanup zoned device initialization
  null_blk: Fix zoned command handling
  block: remove unused header
  blk-iocost: Fix error on iocost_ioc_vrate_adj
  bdev: Reduce time holding bd_mutex in sync in blkdev_close()
  buffer: remove useless comment and WB_REASON_FREE_MORE_MEM, reason.

Pull tracing fixes from Steven Rostedt:
 "A few tracing fixes:

   - Two fixes for memory leaks detected by kmemleak

   - Removal of some dead code

   - A few local functions turned static"

* tag 'trace-v5.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing: Convert local functions in tracing_map.c to static
  tracing: Remove DECLARE_TRACE_NOARGS
  ftrace: Fix memory leak caused by not freeing entry in unregister_ftrace_direct()
  tracing: Fix memory leaks in trace_events_hist.c

* acpi-pci:
  ACPI/PCI: pci_link: use extended_irq union member when setting ext-irq shareable

Pull arm64 fixes from Catalin Marinas:

 - Ensure context synchronisation after a write to APIAKey.

 - Fix bullet list formatting in Documentation/arm64/amu.rst to
   eliminate doc warnings.

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  Documentation: arm64: fix amu.rst doc warnings
  arm64: sync kernel APIAKey when installing