Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 01 4月, 2015 3 次提交
  3. 17 3月, 2015 3 次提交
  5. 06 3月, 2015 1 次提交
    • E
      KVM: s390: Allocate and save/restore vector registers · 68c55750
      由 Eric Farman 提交于 
      Define and allocate space for both the host and guest views of
the vector registers for a given vcpu.  The 32 vector registers
occupy 128 bits each (512 bytes total), but architecturally are
paired with 512 additional bytes of reserved space for future
expansion.

The kvm_sync_regs structs containing the registers are union'ed
with 1024 bytes of padding in the common kvm_run struct.  The
addition of 1024 bytes of new register information clearly exceeds
the existing union, so an expansion of that padding is required.

When changing environments, we need to appropriately save and
restore the vector registers viewed by both the host and guest,
into and out of the sync_regs space.

The floating point registers overlay the upper half of vector
registers 0-15, so there's a bit of data duplication here that
needs to be carefully avoided.
Signed-off-by: NEric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com>
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
      68c55750
  7. 09 2月, 2015 1 次提交
  9. 23 1月, 2015 3 次提交
  11. 21 1月, 2015 2 次提交
  13. 11 1月, 2015 1 次提交
    • E
      KVM: arm/arm64: vgic: add init entry to VGIC KVM device · 065c0034
      由 Eric Auger 提交于 
      Since the advent of VGIC dynamic initialization, this latter is
initialized quite late on the first vcpu run or "on-demand", when
injecting an IRQ or when the guest sets its registers.

This initialization could be initiated explicitly much earlier
by the users-space, as soon as it has provided the requested
dimensioning parameters.

This patch adds a new entry to the VGIC KVM device that allows
the user to manually request the VGIC init:
- a new KVM_DEV_ARM_VGIC_GRP_CTRL group is introduced.
- Its first attribute is KVM_DEV_ARM_VGIC_CTRL_INIT

The rationale behind introducing a group is to be able to add other
controls later on, if needed.
Signed-off-by: NEric Auger <eric.auger@linaro.org>
Signed-off-by: NChristoffer Dall <christoffer.dall@linaro.org>
      065c0034
  15. 13 12月, 2014 3 次提交
  17. 20 11月, 2014 1 次提交
  19. 07 11月, 2014 1 次提交
  21. 03 11月, 2014 2 次提交
  23. 22 9月, 2014 1 次提交
  25. 19 9月, 2014 1 次提交
  27. 10 9月, 2014 2 次提交
  29. 03 9月, 2014 1 次提交
    • D
      kvm: fix potentially corrupt mmio cache · ee3d1570
      由 David Matlack 提交于 
      vcpu exits and memslot mutations can run concurrently as long as the
vcpu does not aquire the slots mutex. Thus it is theoretically possible
for memslots to change underneath a vcpu that is handling an exit.

If we increment the memslot generation number again after
synchronize_srcu_expedited(), vcpus can safely cache memslot generation
without maintaining a single rcu_dereference through an entire vm exit.
And much of the x86/kvm code does not maintain a single rcu_dereference
of the current memslots during each exit.

We can prevent the following case:

   vcpu (CPU 0)                             | thread (CPU 1)
--------------------------------------------+--------------------------
1  vm exit                                  |
2  srcu_read_unlock(&kvm->srcu)             |
3  decide to cache something based on       |
     old memslots                           |
4                                           | change memslots
                                            | (increments generation)
5                                           | synchronize_srcu(&kvm->srcu);
6  retrieve generation # from new memslots  |
7  tag cache with new memslot generation    |
8  srcu_read_unlock(&kvm->srcu)             |
...                                         |
   <action based on cache occurs even       |
    though the caching decision was based   |
    on the old memslots>                    |
...                                         |
   <action *continues* to occur until next  |
    memslot generation change, which may    |
    be never>                               |
                                            |

By incrementing the generation after synchronizing with kvm->srcu readers,
we ensure that the generation retrieved in (6) will become invalid soon
after (8).

Keeping the existing increment is not strictly necessary, but we
do keep it and just move it for consistency from update_memslots to
install_new_memslots.  It invalidates old cached MMIOs immediately,
instead of having to wait for the end of synchronize_srcu_expedited,
which makes the code more clearly correct in case CPU 1 is preempted
right after synchronize_srcu() returns.

To avoid halving the generation space in SPTEs, always presume that the
low bit of the generation is zero when reconstructing a generation number
out of an SPTE.  This effectively disables MMIO caching in SPTEs during
the call to synchronize_srcu_expedited.  Using the low bit this way is
somewhat like a seqcount---where the protected thing is a cache, and
instead of retrying we can simply punt if we observe the low bit to be 1.

Cc: stable@vger.kernel.org
Signed-off-by: NDavid Matlack <dmatlack@google.com>
Reviewed-by: NXiao Guangrong <xiaoguangrong@linux.vnet.ibm.com>
Reviewed-by: NDavid Matlack <dmatlack@google.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      ee3d1570
  31. 25 8月, 2014 1 次提交
  33. 29 7月, 2014 1 次提交
  35. 28 7月, 2014 4 次提交
    • A
      KVM: Allow KVM_CHECK_EXTENSION on the vm fd · 92b591a4
      由 Alexander Graf 提交于 
      The KVM_CHECK_EXTENSION is only available on the kvm fd today. Unfortunately
on PPC some of the capabilities change depending on the way a VM was created.

So instead we need a way to expose capabilities as VM ioctl, so that we can
see which VM type we're using (HV or PR). To enable this, add the
KVM_CHECK_EXTENSION ioctl to our vm ioctl portfolio.
Signed-off-by: NAlexander Graf <agraf@suse.de>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
      92b591a4
    • A
      KVM: PPC: Book3S: Fix LPCR one_reg interface · a0840240
      由 Alexey Kardashevskiy 提交于 
      Unfortunately, the LPCR got defined as a 32-bit register in the
one_reg interface.  This is unfortunate because KVM allows userspace
to control the DPFD (default prefetch depth) field, which is in the
upper 32 bits.  The result is that DPFD always get set to 0, which
reduces performance in the guest.

We can't just change KVM_REG_PPC_LPCR to be a 64-bit register ID,
since that would break existing userspace binaries.  Instead we define
a new KVM_REG_PPC_LPCR_64 id which is 64-bit.  Userspace can still use
the old KVM_REG_PPC_LPCR id, but it now only modifies those fields in
the bottom 32 bits that userspace can modify (ILE, TC and AIL).
If userspace uses the new KVM_REG_PPC_LPCR_64 id, it can modify DPFD
as well.
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: NAlexander Graf <agraf@suse.de>
      a0840240
    • P
      KVM: PPC: Book3S: Allow only implemented hcalls to be enabled or disabled · ae2113a4
      由 Paul Mackerras 提交于 
      This adds code to check that when the KVM_CAP_PPC_ENABLE_HCALL
capability is used to enable or disable in-kernel handling of an
hcall, that the hcall is actually implemented by the kernel.
If not an EINVAL error is returned.

This also checks the default-enabled list of hcalls and prints a
warning if any hcall there is not actually implemented.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      ae2113a4
    • P
      KVM: PPC: Book3S: Controls for in-kernel sPAPR hypercall handling · 699a0ea0
      由 Paul Mackerras 提交于 
      This provides a way for userspace controls which sPAPR hcalls get
handled in the kernel.  Each hcall can be individually enabled or
disabled for in-kernel handling, except for H_RTAS.  The exception
for H_RTAS is because userspace can already control whether
individual RTAS functions are handled in-kernel or not via the
KVM_PPC_RTAS_DEFINE_TOKEN ioctl, and because the numeric value for
H_RTAS is out of the normal sequence of hcall numbers.

Hcalls are enabled or disabled using the KVM_ENABLE_CAP ioctl for the
KVM_CAP_PPC_ENABLE_HCALL capability on the file descriptor for the VM.
The args field of the struct kvm_enable_cap specifies the hcall number
in args[0] and the enable/disable flag in args[1]; 0 means disable
in-kernel handling (so that the hcall will always cause an exit to
userspace) and 1 means enable.  Enabling or disabling in-kernel
handling of an hcall is effective across the whole VM.

The ability for KVM_ENABLE_CAP to be used on a VM file descriptor
on PowerPC is new, added by this commit.  The KVM_CAP_ENABLE_CAP_VM
capability advertises that this ability exists.

When a VM is created, an initial set of hcalls are enabled for
in-kernel handling.  The set that is enabled is the set that have
an in-kernel implementation at this point.  Any new hcall
implementations from this point onwards should not be added to the
default set without a good reason.

No distinction is made between real-mode and virtual-mode hcall
implementations; the one setting controls them both.
Signed-off-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAlexander Graf <agraf@suse.de>
      699a0ea0
  37. 21 7月, 2014 2 次提交
  39. 10 7月, 2014 5 次提交
  41. 30 5月, 2014 1 次提交