Drivers may override the WCE flag, in which case the DPOFUA flag in
MODE SENSE might differ from the check used to reject invalid FUA
bits in sbc_check_dpofua.  Also now that we reject invalid FUA
bits early there is no need to duplicate the same buggy check
down in the fileio code.

As the DPOFUA flag controls th support for FUA bits on read and
write commands as well as DPO key off all the checks off a single
helper, and deprecate the emulate_dpo and emulate_fua_read attributs.

This fixes various failures in the libiscsi testsuite.

Personally I'd prefer to also remove the emulate_fua_write attribute
as there is no good reason to disable it, but I'll leave that for
a separate discussion.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Support for markers is currently broken because of a bug in
iscsi_enforce_integrity_rules(): the "IFMarkInt_Reject" and
"OFMarkInt_Reject" variables are always equal to 1 in
iscsi_enforce_integrity_rules().

Moreover, fixed interval markers keys (IFMarker, OFMarker, IFMarkInt
and OFMarkInt) are obsolete according to iSCSI RFC 7143:

>From http://tools.ietf.org/html/rfc7143#section-13.25:

   13.25.  Obsoleted Keys

   This document obsoletes the following keys defined in [RFC3720]:
   IFMarker, OFMarker, OFMarkInt, and IFMarkInt.  However, iSCSI
   implementations compliant to this document may still receive these
   obsoleted keys -- i.e., in a responder role -- in a text negotiation.

   When an IFMarker or OFMarker key is received, a compliant iSCSI
   implementation SHOULD respond with the constant "Reject" value.  The
   implementation MAY alternatively respond with a "No" value.

   However, the implementation MUST NOT respond with a "NotUnderstood"
   value for either of these keys.

   When an IFMarkInt or OFMarkInt key is received, a compliant iSCSI
   implementation MUST respond with the constant "Reject" value.  The
   implementation MUST NOT respond with a "NotUnderstood" value for
   either of these keys.

This patch disables markers by turning the corresponding parameters to
read-only. The default value of IFMarker and OFMarker remains "No" but
the user cannot change it to "Yes" anymore. The new value of IFMarkInt
and OFMarkInt is "Reject".

(Drop left-over iscsi_get_value_from_number_range + make configfs
 parameters attrs R/W nops - nab)
Signed-off-by: NChristophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Fix map/unmap consistency and get rid of a redundant
local variable psg.
Reported-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The reason this bounce buffer exists is to allow code
reuse between rd_mcp and fileio in DIF mode. But the fact is,
that this bounce is really not needed at all, we can simply call
sbc_dif_verify on cmd->t_prot_sg and use it for file IO.

This also removes fd_do_prot_rw as fd_do_rw was generalised
to receive file pointer, block size (8 bytes for DIF data) and
total data length.

(Fix apply breakage from commit c8367778 - nab)
Tested-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Instead of providing DIF verify routines for read/write
that are almost identical and conditionally copy protection
information, just let the caller do the right thing.

Have a single sbc_dif_verify that handles an sgl (that
does NOT copy any data) and a protection information copy
routine used by rd_mcp and fileio backend.

In the WRITE case, call sbc_dif_verify with cmd->t_prot_sg
and then do the copy from it to local sgl (assuming the verify
succeeded of course). In the READ case, call sbc_dif_verify
with the local sgl and if it succeeds, copy it to t_prot_sg (or
not if we are stripping it).

(Fix apply breakage from commit c8367778 - nab)
Tested-by: NAkinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

We don't assign pi_ctx to desc->pi_ctx until we're certain to succeed
in the function.  That means the cleanup path should use the local
pi_ctx variable, not desc->pi_ctx.

This was detected by Coverity (CID 1260062).
Signed-off-by: NRoland Dreier <roland@purestorage.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

It seems like we only care if a transport is passthrough or not. Convert
transport_type to a flags field and replace TRANSPORT_PLUGIN_* with a
flag, TRANSPORT_FLAG_PASSTHROUGH.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Aside from whether they handle BIDI ops or not, parsing of the CDB by
kernel and user SCSI passthrough modules should be identical. Move this
into a new passthrough_parse_cdb() and call it from tcm-pscsi and tcm-user.
Reported-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: NAndy Grover <agrover@redhat.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

After much discussion, give up on only passing a subset of SCSI commands
to userspace and pass them all. Based on what pscsi is doing, make sure
to set SCF_SCSI_DATA_CDB for I/O ops, and define attributes identical to
pscsi.

Make hw_block_size configurable via dev param.

Remove mention of command filtering from tcmu-design.txt.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Reviewed-by: NIlias Tsitsimpis <iliastsi@arrikto.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

See https://bugzilla.redhat.com/show_bug.cgi?id=1025672

We need to put() the reference to the scsi host that we got in
pscsi_configure_device(). In VIRTUAL_HOST mode it is associated with
the dev_virt, not the hba_virt.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Cc: stable@vger.kernel.org # 2.6.38+
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

There is just one configfs subsystem in the target code, so we might as
well add two helpers to reference / unreference it from the core code
instead of passing pointers to it around.

This fixes a regression introduced for v4.1-rc1 with commit 9ac8928e,
where configfs_depend_item() callers using se_tpg_tfo->tf_subsys would
fail, because the assignment from the original target_core_subsystem[]
is no longer happening at target_register_template() time.

(Fix target_core_exit_configfs pointer dereference - Sagi)
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NHimanshu Madhani <himanshu.madhani@qlogic.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Once upon a time, iscsit_get_tpg() was using an un-interruptible
lock.  The signal_pending() usage was a check to allow userspace
to break out of the operation with SIGINT.

AFAICT, there's no reason why this is necessary anymore, and as
reported by Alexey can be potentially dangerous.  Also, go ahead
and drop the other two problematic cases within iscsit_access_np()
and sbc_compare_and_write() as well.

Found by Linux Driver Verification project (linuxtesting.org).
Reported-by: NAlexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Code like " &= ~CMD_T_BUSY | ..." only clears CMD_T_BUSY but not
the other flag. Modify these statements such that both flags are
cleared.

(Fix fuzz for target_write_prot_action code in mainline - nab)
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

The function transport_complete_qf() must call either
queue_data_in() or queue_status() but not both.
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

TCMU requires more work to correctly handle both user handlers that want
all SCSI commands (pass_level=0) for a se_device, and also handlers that
just want I/O commands and let the others be emulated by the kernel
(pass_level=1). Only support the latter for now.

For full passthrough, we will need to support a second se_subsystem_api
template, due to configfs attributes being different between the two modes.
Thus pass_level is extraneous, and we can remove it.

The ABI break for TCMU v2 is already applied for this release, so it's
best to do this now to avoid another ABI break in the future.
Signed-off-by: NAndy Grover <agrover@redhat.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

This patch adds a missing kfree for sess->sess_ops memory upon
transport_init_session() failure.
Signed-off-by: NEvgenii Lepikhin <johnlepikhin@gmail.com>
Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>

Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The new Atmel MXT driver expects i2c client's address contain the
primary (main address) of the chip, and calculates the expected
bootloader address form the primary address. Unfortunately chrome_laptop
does probe the devices and if touchpad (or touchscreen, or both) comes
up in bootloader mode the i2c device gets instantiated with the
bootloader address which confuses the driver.

To work around this issue let's probe the primary address first. If the
device is not detected at the primary address we'll probe alternative
addresses as "dummy" devices. If any of them are found, destroy the
dummy client and instantiate client with proper name at primary address
still.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

commit a39f46df ("toshiba_acpi: Fix regression caused by backlight extra
check code") causes the backlight to no longer work on the Toshiba Z30,
reverting that commit fixes this but restores the original issue fixed
by that commit.

Looking at the toshiba_acpi backlight code for a fix for this I noticed that
the toshiba code is the only code under platform/x86 which unconditionally
registers a vendor acpi backlight interface, without checking for acpi_video
backlight support first.

This commit adds the necessary checks bringing toshiba_acpi in line with the
other drivers, and fixing the Z30 regression without needing to revert the
commit causing it.

Chances are that there will be some Toshiba models which have a non working
acpi-video implementation while the toshiba vendor backlight interface does
work, this commit adds an empty dmi_id table where such systems can be added,
this is identical to how other drivers handle such systems.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1206036
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=86521Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-and-tested-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

If NO_DMA=y:

    drivers/built-in.o: In function `img_hash_write_via_dma_stop':
    img-hash.c:(.text+0xa2b822): undefined reference to `dma_unmap_sg'
    drivers/built-in.o: In function `img_hash_xmit_dma':
    img-hash.c:(.text+0xa2b8d8): undefined reference to `dma_map_sg'
    img-hash.c:(.text+0xa2b948): undefined reference to `dma_unmap_sg'

Also move the "depends" section below the "tristate" line while we're at
it.
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

If the special PRP0001 device ID is present in the given device's list
of ACPI/PNP IDs and the device has a valid "compatible" property in
the _DSD, it should be enumerated using the default mechanism,
unless some scan handlers match the IDs preceding PRP0001 in the
device's list of ACPI/PNP IDs.  In addition to that, no scan handlers
matching the IDs following PRP0001 in that list should be attached
to the device.

To make that happen, define a scan handler that will match PRP0001
and trigger the default enumeration for the matching devices if the
"compatible" property is present for them.

Since that requires the check for platform_id and device->handler
to be removed from acpi_default_enumeration(), move the fallback
invocation of acpi_default_enumeration() to acpi_bus_attach()
(after it's checked if there's a matching ACPI driver for the
device), which is a better place to call it, and do the platform_id
check in there too (device->handler is guaranteed to be unset at
the point where the function is looking for a matching ACPI driver).
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NDarren Hart <dvhart@linux.intel.com>

acpi_scan_is_offline() may be called under the physical_node_lock
lock of the given device object's parent, so prevent lockdep from
complaining about that by annotating that instance with
SINGLE_DEPTH_NESTING.

Fixes: caa73ea1 (ACPI / hotplug / driver core: Handle containers in a special way)
Reported-and-tested-by: NXie XiuQi <xiexiuqi@huawei.com>
Reviewed-by: NToshi Kani <toshi.kani@hp.com>
Cc: 3.14+ <stable@vger.kernel.org> # 3.14+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Due this typo we don't save/restore the GFX_MAX_REQ_COUNT register across
suspend/resume, so fix this.

This was introduced in

commit ddeea5b0
Author: Imre Deak <imre.deak@intel.com>
Date:   Mon May 5 15:19:56 2014 +0300

    drm/i915: vlv: add runtime PM support

I noticed this only by reading the code. To my knowledge it shouldn't
cause any real problems at the moment, since the power well backing this
register remains on across a runtime s/r. This may change once
system-wide s0ix functionality is enabled in the kernel.

v2:
- resend after a missing git add -u :/

Cc: stable@vger.kernel.org
Signed-off-by: NImre Deak <imre.deak@intel.com>
Tested-By: PRC QA PRTS (Patch Regression Test System Contact: shuang.he@intel.com)
Signed-off-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: NMika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

WaIdleLiteRestore is an execlists-only workaround, and requires the driver
to ensure that any context always has HEAD!=TAIL when attempting lite
restore.

Add two extra MI_NOOP instructions at the end of each request, but keep
the requests tail pointing before the MI_NOOPs. We may not need to
executed them, and this is why request->tail is sampled before adding
these extra instructions.

If we submit a context to the ELSP which has previously been submitted,
move the tail pointer past the MI_NOOPs. This ensures HEAD!=TAIL.

v2: Move overallocation to gen8_emit_request, and added note about
sampling request->tail in commit message (Chris).

v3: Remove redundant request->tail assignment in __i915_add_request, in
lrc mode this is already set in execlists_context_queue.
Do not add wa implementation details inside gem (Chris).

v4: Apply the wa whenever the req has been resubmitted and update
comment (Chris).

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NThomas Daniel <thomas.daniel@intel.com>
Signed-off-by: NMichel Thierry <michel.thierry@intel.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The hardware, according to the specs, is limited to 256 byte transfers,
and current driver has no protections in case users attempt to do larger
transfers. The code will just stomp over status register and mayhem
ensues.

Let's split larger transfers into digestable chunks. Doing this allows
Atmel MXT driver on Pixel 1 function properly (it hasn't since commit
9d8dc3e5 "Input: atmel_mxt_ts -
implement T44 message handling" which tries to consume multiple
touchscreen/touchpad reports in a single transaction).

Cc: stable@vger.kernel.org
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>

The driver uses pinctrl directly and thus should include the appropriate
header. Sort the headers while we are here to have a better view what is
included and what is not.
Reported-by: NPascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Those symlinks are created for the mux_dev, so we need to remove it from
there. Currently, it breaks for muxes where the mux_dev is not the device
of the parent adapter like this:

[   78.234644] WARNING: CPU: 0 PID: 365 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x5c/0x78()
[   78.242438] sysfs: cannot create duplicate filename '/devices/platform/i2cbus@8/channel-0'

Remove confusing comments while we are here.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Fixes: c9449aff
Cc: stable@kernel.org

And sort them to prevent this from happening again.
Reported-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Commit 523c5b89 ("i2c: Remove support for legacy PM") removed the PM
ops from the bus type, which causes the pm operations on the s3c2410
adapter device to fail (-ENOSUPP in rpm_callback). The adapter device
doesn't get bound to a driver and as such can't have its own pm_runtime
callbacks. Previously this was fine as the bus callbacks would have been
used, but now this can cause devices which use PM runtime and are
attached over I2C to fail to resume.

This commit fixes this issue by marking all adapter devices with
pm_runtime_no_callbacks, since they can't have any.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: NBeata Michalska <b.michalska@samsung.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Fixes: 523c5b89
Cc: stable@kernel.org

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>

master_xfer() method should return number of i2c messages transferred,
but on Rockchip we were usually returning just 1, which caused trouble
with users that actually check number of transferred messages vs.
checking for negative error codes.
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Cc: stable@kernel.org

For platforms that don't support DT, some early MFD modules can register
lookup tables. Remove the __init annotation so that this works. This is
similar to gpio_add_lookup_table() which allows late additions.

CC: Samuel Ortiz <sameo@linux.intel.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Alexandre Courbot <gnurou@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NShobhit Kumar <shobhit.kumar@intel.com>
Signed-off-by: NThierry Reding <thierry.reding@gmail.com>

HSU_DMA is selected by the HSU_DMA_PCI driver, this should be user selected
so remove the user prompt for this
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

After the switch to blk-mq rbd_wq processes requests, not devices.
Signed-off-by: NIlya Dryomov <idryomov@gmail.com>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

My Pengutronix address is not valid anymore, redirect people to the Pengutronix
kernel team.
Reported-by: NHarald Geyer <harald@ccbib.org>
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NRobert Schwebel <r.schwebel@pengutronix.de>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Use fixed length string for register names. This saves 416 bytes
in text size.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Fix some trivial coding style issues to reduce noise from static analyzers.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

Convert OCTEON watchdog to WATCHDOG_CORE API. This enables support
for multiple watchdogs on OCTEON boards.
Signed-off-by: NAaro Koskinen <aaro.koskinen@iki.fi>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>