- 31 8月, 2017 1 次提交
-
-
由 David Hildenbrand 提交于
Looks like the "overflowing" range check is wrong. |=======b-------a=======| addr >= a || addr <= b Signed-off-by: NDavid Hildenbrand <david@redhat.com> Message-Id: <20170830160603.5452-2-david@redhat.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 29 8月, 2017 4 次提交
-
-
由 David Hildenbrand 提交于
Independent of the underlying hardware, kvm will now always handle SIGP SET ARCHITECTURE as if czam were enabled. Therefore, let's not only forward that bit but always set it. While at it, add a comment regarding STHYI. Signed-off-by: NDavid Hildenbrand <david@redhat.com> Message-Id: <20170829143108.14703-1-david@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Claudio Imbrenda 提交于
The STFLE bit 147 indicates whether the ESSA no-DAT operation code is valid, the bit is not normally provided to the host; the host is instead provided with an SCLP bit that indicates whether guests can support the feature. This patch: * enables the STFLE bit in the guest if the corresponding SCLP bit is present in the host. * adds support for migrating the no-DAT bit in the PGSTEs * fixes the software interpretation of the ESSA instruction that is used when migrating, both for the new operation code and for the old "set stable", as per specifications. Signed-off-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Acked-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
handle_sthyi() always writes to guest memory if the sthyi function code is zero in order to fault in the page that later is written to. However a function code of zero does not necessarily mean that a write to guest memory happens: if the KVM host is running as a second level guest under z/VM 6.2 the sthyi instruction is indicated to be available to the KVM host, however if the instruction is executed it will always return with a return code that indicates "unsupported function code". In such a case handle_sthyi() must not write to guest memory. This means that the prior write access to fault in the guest page may result in invalid guest exceptions, and/or invalid data modification. In order to be architecture compliant simply remove the write_guest() call. Given that the guest assumed a write access anyway, this fix does not qualify for -stable. This just makes sure the sthyi handler is architecture compliant. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Collin L. Walling 提交于
Allow for the enablement of MEF and the support for the extended epoch in SIE and VSIE for the extended guest TOD-Clock. A new interface is used for getting/setting a guest's extended TOD-Clock that uses a single ioctl invocation, KVM_S390_VM_TOD_EXT. Since the host time is a moving target that might see an epoch switch or STP sync checks we need an atomic ioctl and cannot use the exisiting two interfaces. The old method of getting and setting the guest TOD-Clock is still retained and is used when the old ioctls are called. Signed-off-by: NCollin L. Walling <walling@linux.vnet.ibm.com> Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: NClaudio Imbrenda <imbrenda@linux.vnet.ibm.com> Reviewed-by: NJason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 28 8月, 2017 1 次提交
-
-
由 Jason J. Herne 提交于
kvm has always supported the concept of starting in z/Arch mode so let's reflect the feature bit to the guest. Also, we change sigp set architecture to reject any request to change architecture modes. Signed-off-by: NJason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 21 8月, 2017 2 次提交
-
-
由 Heiko Carstens 提交于
sthyi should only generate a specification exception if the function code is zero and the response buffer is not on a 4k boundary. The current code would also test for unknown function codes if the response buffer, that is currently only defined for function code 0, is not on a 4k boundary and incorrectly inject a specification exception instead of returning with condition code 3 and return code 4 (unsupported function code). Fix this by moving the boundary check. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Cc: <stable@vger.kernel.org> # 4.8+ Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Heiko Carstens 提交于
The sthyi inline assembly misses register r3 within the clobber list. The sthyi instruction will always write a return code to register "R2+1", which in this case would be r3. Due to that we may have register corruption and see host crashes or data corruption depending on how gcc decided to allocate and use registers during compile time. Fixes: 95ca2cb5 ("KVM: s390: Add sthyi emulation") Cc: <stable@vger.kernel.org> # 4.8+ Reviewed-by: NJanosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: NDavid Hildenbrand <david@redhat.com> Reviewed-by: NCornelia Huck <cohuck@redhat.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
- 25 7月, 2017 5 次提交
-
-
由 Christian Borntraeger 提交于
The following warning was triggered by missing srcu locks around the storage key handling functions. ============================= WARNING: suspicious RCU usage 4.12.0+ #56 Not tainted ----------------------------- ./include/linux/kvm_host.h:572 suspicious rcu_dereference_check() usage! rcu_scheduler_active = 2, debug_locks = 1 1 lock held by live_migration/4936: #0: (&mm->mmap_sem){++++++}, at: [<0000000000141be0>] kvm_arch_vm_ioctl+0x6b8/0x22d0 CPU: 8 PID: 4936 Comm: live_migration Not tainted 4.12.0+ #56 Hardware name: IBM 2964 NC9 704 (LPAR) Call Trace: ([<000000000011378a>] show_stack+0xea/0xf0) [<000000000055cc4c>] dump_stack+0x94/0xd8 [<000000000012ee70>] gfn_to_memslot+0x1a0/0x1b8 [<0000000000130b76>] gfn_to_hva+0x2e/0x48 [<0000000000141c3c>] kvm_arch_vm_ioctl+0x714/0x22d0 [<000000000013306c>] kvm_vm_ioctl+0x11c/0x7b8 [<000000000037e2c0>] do_vfs_ioctl+0xa8/0x6c8 [<000000000037e984>] SyS_ioctl+0xa4/0xb8 [<00000000008b20a4>] system_call+0xc4/0x27c 1 lock held by live_migration/4936: #0: (&mm->mmap_sem){++++++}, at: [<0000000000141be0>] kvm_arch_vm_ioctl+0x6b8/0x22d0 Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Pierre Morel<pmorel@linux.vnet.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Martin Schwidefsky 提交于
The ESSA instruction has a new option that allows to tag pages that are not used as a page table. Without the tag the hypervisor has to assume that any guest page could be used in a page table inside the guest. This forces the hypervisor to flush all guest TLB entries whenever a host page table entry is invalidated. With the tag the host can skip the TLB flush if the page is tagged as normal page. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 20 7月, 2017 1 次提交
-
-
由 Josh Poimboeuf 提交于
Mike Galbraith reported a situation where a WARN_ON_ONCE() call in DRM code turned into an oops. As it turns out, WARN_ON_ONCE() seems to be completely broken when called from a module. The bug was introduced with the following commit: 19d43626 ("debug: Add _ONCE() logic to report_bug()") That commit changed WARN_ON_ONCE() to move its 'once' logic into the bug trap handler. It requires a writable bug table so that the BUGFLAG_DONE bit can be written to the flags to indicate the first warning has occurred. The bug table was made writable for vmlinux, which relies on vmlinux.lds.S and vmlinux.lds.h for laying out the sections. However, it wasn't made writable for modules, which rely on the ELF section header flags. Reported-by: NMike Galbraith <efault@gmx.de> Tested-by: NMasami Hiramatsu <mhiramat@kernel.org> Signed-off-by: NJosh Poimboeuf <jpoimboe@redhat.com> Acked-by: NPeter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: 19d43626 ("debug: Add _ONCE() logic to report_bug()") Link: http://lkml.kernel.org/r/a53b04235a65478dd9afc51f5b329fdc65c84364.1500095401.git.jpoimboe@redhat.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 7月, 2017 1 次提交
-
-
由 Xunlei Pang 提交于
As Eric said, "what we need to do is move the variable vmcoreinfo_note out of the kernel's .bss section. And modify the code to regenerate and keep this information in something like the control page. Definitely something like this needs a page all to itself, and ideally far away from any other kernel data structures. I clearly was not watching closely the data someone decided to keep this silly thing in the kernel's .bss section." This patch allocates extra pages for these vmcoreinfo_XXX variables, one advantage is that it enhances some safety of vmcoreinfo, because vmcoreinfo now is kept far away from other kernel data structures. Link: http://lkml.kernel.org/r/1493281021-20737-1-git-send-email-xlpang@redhat.comSigned-off-by: NXunlei Pang <xlpang@redhat.com> Tested-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Reviewed-by: NJuergen Gross <jgross@suse.com> Suggested-by: NEric Biederman <ebiederm@xmission.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dave Young <dyoung@redhat.com> Cc: Hari Bathini <hbathini@linux.vnet.ibm.com> Cc: Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 7月, 2017 1 次提交
-
-
由 Kees Cook 提交于
Now that explicitly executed loaders are loaded in the mmap region, we have more freedom to decide where we position PIE binaries in the address space to avoid possible collisions with mmap or stack regions. For 64-bit, align to 4GB to allow runtimes to use the entire 32-bit address space for 32-bit pointers. On 32-bit use 4MB, which is the traditional x86 minimum load location, likely to avoid historically requiring a 4MB page table entry when only a portion of the first 4MB would be used (since the NULL address is avoided). For s390 the position could be 0x10000, but that is needlessly close to the NULL address. Link: http://lkml.kernel.org/r/1498154792-49952-5-git-send-email-keescook@chromium.orgSigned-off-by: NKees Cook <keescook@chromium.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: James Hogan <james.hogan@imgtec.com> Cc: Pratyush Anand <panand@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 07 7月, 2017 6 次提交
-
-
由 Punit Agrawal 提交于
When unmapping a hugepage range, huge_pte_clear() is used to clear the page table entries that are marked as not present. huge_pte_clear() internally just ends up calling pte_clear() which does not correctly deal with hugepages consisting of contiguous page table entries. Add a size argument to address this issue and allow architectures to override huge_pte_clear() by wrapping it in a #ifndef block. Update s390 implementation with the size parameter as well. Note that the change only affects huge_pte_clear() - the other generic hugetlb functions don't need any change. Link: http://lkml.kernel.org/r/20170522162555.4313-1-punit.agrawal@arm.comSigned-off-by: NPunit Agrawal <punit.agrawal@arm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [s390 bits] Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Steve Capper <steve.capper@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Punit Agrawal 提交于
A poisoned or migrated hugepage is stored as a swap entry in the page tables. On architectures that support hugepages consisting of contiguous page table entries (such as on arm64) this leads to ambiguity in determining the page table entry to return in huge_pte_offset() when a poisoned entry is encountered. Let's remove the ambiguity by adding a size parameter to convey additional information about the requested address. Also fixup the definition/usage of huge_pte_offset() throughout the tree. Link: http://lkml.kernel.org/r/20170522133604.11392-4-punit.agrawal@arm.comSigned-off-by: NPunit Agrawal <punit.agrawal@arm.com> Acked-by: NSteve Capper <steve.capper@arm.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: James Hogan <james.hogan@imgtec.com> (odd fixer:METAG ARCHITECTURE) Cc: Ralf Baechle <ralf@linux-mips.org> (supporter:MIPS) Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Helge Deller <deller@gmx.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@mellanox.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Kravetz <mike.kravetz@oracle.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Hillf Danton <hillf.zj@alibaba-inc.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aneesh Kumar K.V 提交于
This moves the #ifdef in C code to a Kconfig dependency. Also we move the gigantic_page_supported() function to be arch specific. This allows architectures to conditionally enable runtime allocation of gigantic huge page. Architectures like ppc64 supports different gigantic huge page size (16G and 1G) based on the translation mode selected. This provides an opportunity for ppc64 to enable runtime allocation only w.r.t 1G hugepage. No functional change in this patch. Link: http://lkml.kernel.org/r/1494995292-4443-1-git-send-email-aneesh.kumar@linux.vnet.ibm.comSigned-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
arch_add_memory gets for_device argument which then controls whether we want to create memblocks for created memory sections. Simplify the logic by telling whether we want memblocks directly rather than going through pointless negation. This also makes the api easier to understand because it is clear what we want rather than nothing telling for_device which can mean anything. This shouldn't introduce any functional change. Link: http://lkml.kernel.org/r/20170515085827.16474-13-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Tested-by: NDan Williams <dan.j.williams@intel.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
The current memory hotplug implementation relies on having all the struct pages associate with a zone/node during the physical hotplug phase (arch_add_memory->__add_pages->__add_section->__add_zone). In the vast majority of cases this means that they are added to ZONE_NORMAL. This has been so since 9d99aaa3 ("[PATCH] x86_64: Support memory hotadd without sparsemem") and it wasn't a big deal back then because movable onlining didn't exist yet. Much later memory hotplug wanted to (ab)use ZONE_MOVABLE for movable onlining 511c2aba ("mm, memory-hotplug: dynamic configure movable memory and portion memory") and then things got more complicated. Rather than reconsidering the zone association which was no longer needed (because the memory hotplug already depended on SPARSEMEM) a convoluted semantic of zone shifting has been developed. Only the currently last memblock or the one adjacent to the zone_movable can be onlined movable. This essentially means that the online type changes as the new memblocks are added. Let's simulate memory hot online manually $ echo 0x100000000 > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory32/valid_zones Normal Movable $ echo $((0x100000000+(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable $ echo $((0x100000000+2*(128<<20))) > /sys/devices/system/memory/probe $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal /sys/devices/system/memory/memory34/valid_zones:Normal Movable $ echo online_movable > /sys/devices/system/memory/memory34/state $ grep . /sys/devices/system/memory/memory3?/valid_zones /sys/devices/system/memory/memory32/valid_zones:Normal /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Normal This is an awkward semantic because an udev event is sent as soon as the block is onlined and an udev handler might want to online it based on some policy (e.g. association with a node) but it will inherently race with new blocks showing up. This patch changes the physical online phase to not associate pages with any zone at all. All the pages are just marked reserved and wait for the onlining phase to be associated with the zone as per the online request. There are only two requirements - existing ZONE_NORMAL and ZONE_MOVABLE cannot overlap - ZONE_NORMAL precedes ZONE_MOVABLE in physical addresses the latter one is not an inherent requirement and can be changed in the future. It preserves the current behavior and made the code slightly simpler. This is subject to change in future. This means that the same physical online steps as above will lead to the following state: Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Normal Movable /sys/devices/system/memory/memory32/valid_zones:Normal Movable /sys/devices/system/memory/memory33/valid_zones:Normal Movable /sys/devices/system/memory/memory34/valid_zones:Movable Implementation: The current move_pfn_range is reimplemented to check the above requirements (allow_online_pfn_range) and then updates the respective zone (move_pfn_range_to_zone), the pgdat and links all the pages in the pfn range with the zone/node. __add_pages is updated to not require the zone and only initializes sections in the range. This allowed to simplify the arch_add_memory code (s390 could get rid of quite some of code). devm_memremap_pages is the only user of arch_add_memory which relies on the zone association because it only hooks into the memory hotplug only half way. It uses it to associate the new memory with ZONE_DEVICE but doesn't allow it to be {on,off}lined via sysfs. This means that this particular code path has to call move_pfn_range_to_zone explicitly. The original zone shifting code is kept in place and will be removed in the follow up patch for an easier review. Please note that this patch also changes the original behavior when offlining a memory block adjacent to another zone (Normal vs. Movable) used to allow to change its movable type. This will be handled later. [richard.weiyang@gmail.com: simplify zone_intersects()] Link: http://lkml.kernel.org/r/20170616092335.5177-1-richard.weiyang@gmail.com [richard.weiyang@gmail.com: remove duplicate call for set_page_links] Link: http://lkml.kernel.org/r/20170616092335.5177-2-richard.weiyang@gmail.com [akpm@linux-foundation.org: remove unused local `i'] Link: http://lkml.kernel.org/r/20170515085827.16474-12-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Signed-off-by: NWei Yang <richard.weiyang@gmail.com> Tested-by: NDan Williams <dan.j.williams@intel.com> Tested-by: NReza Arbab <arbab@linux.vnet.ibm.com> Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> # For s390 bits Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
Device memory hotplug hooks into regular memory hotplug only half way. It needs memory sections to track struct pages but there is no need/desire to associate those sections with memory blocks and export them to the userspace via sysfs because they cannot be onlined anyway. This is currently expressed by for_device argument to arch_add_memory which then makes sure to associate the given memory range with ZONE_DEVICE. register_new_memory then relies on is_zone_device_section to distinguish special memory hotplug from the regular one. While this works now, later patches in this series want to move __add_zone outside of arch_add_memory path so we have to come up with something else. Add want_memblock down the __add_pages path and use it to control whether the section->memblock association should be done. arch_add_memory then just trivially want memblock for everything but for_device hotplug. remove_memory_section doesn't need is_zone_device_section either. We can simply skip all the memblock specific cleanup if there is no memblock for the given section. This shouldn't introduce any functional change. Link: http://lkml.kernel.org/r/20170515085827.16474-5-mhocko@kernel.orgSigned-off-by: NMichal Hocko <mhocko@suse.com> Tested-by: NDan Williams <dan.j.williams@intel.com> Acked-by: NVlastimil Babka <vbabka@suse.cz> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Daniel Kiper <daniel.kiper@oracle.com> Cc: David Rientjes <rientjes@google.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Igor Mammedov <imammedo@redhat.com> Cc: Jerome Glisse <jglisse@redhat.com> Cc: Joonsoo Kim <js1304@gmail.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Reza Arbab <arbab@linux.vnet.ibm.com> Cc: Tobias Regnery <tobias.regnery@gmail.com> Cc: Toshi Kani <toshi.kani@hpe.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Xishi Qiu <qiuxishi@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 05 7月, 2017 2 次提交
-
-
由 Jiri Olsa 提交于
Zorro reported following crash while having enabled syscall tracing (CONFIG_FTRACE_SYSCALLS): Unable to handle kernel pointer dereference at virtual ... Oops: 0011 [#1] SMP DEBUG_PAGEALLOC SNIP Call Trace: ([<000000000024d79c>] ftrace_syscall_enter+0xec/0x1d8) [<00000000001099c6>] do_syscall_trace_enter+0x236/0x2f8 [<0000000000730f1c>] sysc_tracesys+0x1a/0x32 [<000003fffcf946a2>] 0x3fffcf946a2 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000022dd44>] rb_event_data+0x34/0x40 ---[ end trace 8c795f86b1b3f7b9 ]--- The crash happens in syscall_get_arguments function for syscalls with zero arguments, that will try to access first argument (args[0]) in event entry, but it's not allocated. Bail out of there are no arguments. Cc: stable@vger.kernel.org Reported-by: NZorro Lang <zlang@redhat.com> Signed-off-by: NJiri Olsa <jolsa@kernel.org> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Michael Holzheu 提交于
After commmit 692f66f2 ("crash: move crashkernel parsing and vmcore related code under CONFIG_CRASH_CORE") the KEXEC_NOTE_BYTES macro is not used anymore and for s390 we create the ELF header in the new kernel anyway. Therefore remove the macro. Reported-by: NXunlei Pang <xpang@redhat.com> Reviewed-by: NMikhail Zaslonko <zaslonko@linux.vnet.ibm.com> Signed-off-by: NMichael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 04 7月, 2017 1 次提交
-
-
由 Al Viro 提交于
no users left Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 29 6月, 2017 1 次提交
-
-
由 Tobias Klauser 提交于
The only user of thread_saved_pc() in non-arch-specific code was removed in commit 8243d559 ("sched/core: Remove pointless printout in sched_show_task()"). Remove the implementations as well. Some architectures use thread_saved_pc() in their arch-specific code. Leave their thread_saved_pc() intact. Signed-off-by: NTobias Klauser <tklauser@distanz.ch> Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 28 6月, 2017 12 次提交
-
-
由 Christoph Hellwig 提交于
s390 can also use noop_dma_ops, and while that currently does not return errors it will so in the future. Implementing the mapping_error method is the proper way to have per-ops error conditions. Signed-off-by: NChristoph Hellwig <hch@lst.de> Acked-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
-
由 QingFeng Hao 提交于
With vsie feature enabled, kvm can support nested guests (guest-3). So inject machine check to the guest-2 if it happens when the nested guest is running. And guest-2 will detect the machine check belongs to guest-3 and reinject it into guest-3. The host (guest-1) tries to inject the machine check to the picked destination vcpu if it's a floating machine check. Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 QingFeng Hao 提交于
If the exit flag of SIE indicates that a machine check has happened during guest's running and needs to be injected, inject it to the guest accordingly. But some machine checks, e.g. Channel Report Pending (CRW), refer to host conditions only (the guest's channel devices are not managed by the kernel directly) and are therefore not injected into the guest. External Damage (ED) is also not reinjected into the guest because ETR conditions are gone in Linux and STP conditions are not enabled in the guest, and ED contains only these 8 ETR and STP conditions. In general, instruction-processing damage, system recovery, storage error, service-processor damage and channel subsystem damage will be reinjected into the guest, and the remain (System damage, timing-facility damage, warning, ED and CRW) will be handled on the host. Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Sebastian Ott 提交于
When uid checking is enabled firmware guarantees uniqueness of the uids and we use them for device enumeration. Tests have shown that uid checking can be toggled at runtime. This is unfortunate since it can lead to name clashes. Recognize these name clashes by allocating bits in zpci_domain even for firmware provided ids. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NPierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Add some debug data to observe the lifetime of the architecture specific device information. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
In contrast to other hotplug events PEC 0x306 isn't about a single but multiple devices. Also there's no information on what happened to these devices. We correctly handled hotplug that way but failed to handle hot-unplug. This patch addresses that and implements hot-unplug of multiple devices via PEC 306. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
PCI hotplug events basically notify about the new state of a function. Unfortunately some hypervisors implement hotplug events in a way where it is not clear what the new state of the function should be. Use clp_get_state to find the current state of the function and handle accordingly. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Code handling pci hotplug needs to determine the configuration state of a pci function. Implement clp_get_state as a wrapper for list pci functions. Also change enum zpci_state to match the configuration state values. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Cleanup in zpci_fmb_enable_device when fmb registration fails. Also don't free the fmb when deregistration fails in zpci_fmb_disable_device but handle error situations when a function was hot-unplugged. Also remove the mod_pci helper since it is no longer used. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
DMA tables are freed in zpci_dma_exit_device regardless of the return code of zpci_unregister_ioat. This could lead to a use after free. On the other hand during function hot-unplug, zpci_unregister_ioat will always fail since the function is already gone. So let zpci_unregister_ioat report success when the function is gone but don't cleanup the dma table when a function could still have it in access. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
When we ask a function to stop creating interrupts this may fail due to the function being already gone (e.g. after hot-unplug). Consequently we don't free associated resources like summary bits and bit vectors used for irq processing. This could lead to situations where we ran out of these resources and fail to setup new interrupts. The fix is to just ignore the errors in cases where we can be sure no new interrupts are generated. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
After failures in arch_setup_msi_irqs common code calls arch_teardown_msi_irqs. Thus, remove cleanup code from arch_setup_msi_irqs. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: NGerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 6月, 2017 2 次提交
-
-
由 QingFeng Hao 提交于
When a machine check happens in the guest, related mcck info (mcic, external damage code, ...) is stored in the vcpu's lowcore on the host. Then the machine check handler's low-level part is executed, followed by the high-level part. If the high-level part's execution is interrupted by a new machine check happening on the same vcpu on the host, the mcck info in the lowcore is overwritten with the new machine check's data. If the high-level part's execution is scheduled to a different cpu, the mcck info in the lowcore is uncertain. Therefore, for both cases, the further reinjection to the guest will use the wrong data. Let's backup the mcck info in the lowcore to the sie page for further reinjection, so that the right data will be used. Add new member into struct sie_page to store related machine check's info of mcic, failing storage address and external damage code. Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 QingFeng Hao 提交于
Add the logic to check if the machine check happens when the guest is running. If yes, set the exit reason -EINTR in the machine check's interrupt handler. Refactor s390_do_machine_check to avoid panicing the host for some kinds of machine checks which happen when guest is running. Reinject the instruction processing damage's machine checks including Delayed Access Exception instead of damaging the host if it happens in the guest because it could be caused by improper update on TLB entry or other software case and impacts the guest only. Signed-off-by: NQingFeng Hao <haoqf@linux.vnet.ibm.com> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-