According to Documentation/power/devices.txt

The driver should not use device_set_wakeup_enable() which is the policy
for user to decide.

Using device_init_wakeup() to initialize dev->power.should_wakeup and
dev->power.can_wakeup on driver initialization.

And use device_may_wakeup() on suspend to decide if WoL function should
be enabled on NIC.
Reported-by: NDiego Viola <diego.viola@gmail.com>
Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Otherwise it might be back on resume right after going to suspend in
some hardware.
Reported-by: NDiego Viola <diego.viola@gmail.com>
Signed-off-by: NGuo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

IPv4 interprets a negative return value from a protocol handler as a
request to redispatch to a new protocol.  In contrast, IPv6 interprets a
negative value as an error, and interprets a positive value as a request
for redispatch.

UDP for IPv6 was unaware of this difference.  Change __udp6_lib_rcv() to
return a positive value for redispatch.  Note that the socket's
encap_rcv hook still needs to return a negative value to request
dispatch, and in the case of IPv6 packets, adjust IP6CB(skb)->nhoff to
identify the byte containing the next protocol.
Signed-off-by: NBill Sommerfeld <wsommerfeld@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The adapter->pcicfg resource is either mapped via pci_iomap() or
derived from adapter->db. During be_remove() this resource was ignored
and so could remain mapped after remove.

Add a flag to track whether adapter->pcicfg was mapped or not, then
use that flag in be_unmap_pci_bars() to unmap if required.

Fixes: 25848c90 ("use PCI MMIO read instead of config read for errors")
Signed-off-by: NDouglas Miller <dougmill@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

vmxnet3 has a function vmxnet3_parse_and_copy_hdr which, among other operations,
uses pskb_may_pull to linearize the header portion of an skb.  That operation
eventually uses local_bh_disable/enable to ensure that it doesn't race with the
drivers bottom half handler.  Unfortunately, vmxnet3 preforms this
parse_and_copy operation with a spinlock held and interrupts disabled.  This
causes us to run afoul of the WARN_ON_ONCE(irqs_disabled()) warning in
local_bh_enable, resulting in this:

WARNING: at kernel/softirq.c:159 local_bh_enable+0x59/0x90() (Not tainted)
Hardware name: VMware Virtual Platform
Modules linked in: ipv6 ppdev parport_pc parport microcode e1000 vmware_balloon
vmxnet3 i2c_piix4 sg ext4 jbd2 mbcache sd_mod crc_t10dif sr_mod cdrom mptspi
mptscsih mptbase scsi_transport_spi pata_acpi ata_generic ata_piix vmwgfx ttm
drm_kms_helper drm i2c_core dm_mirror dm_region_hash dm_log dm_mod [last
unloaded: mperf]
Pid: 6229, comm: sshd Not tainted 2.6.32-616.el6.i686 #1
Call Trace:
 [<c04624d9>] ? warn_slowpath_common+0x89/0xe0
 [<c0469e99>] ? local_bh_enable+0x59/0x90
 [<c046254b>] ? warn_slowpath_null+0x1b/0x20
 [<c0469e99>] ? local_bh_enable+0x59/0x90
 [<c07bb936>] ? skb_copy_bits+0x126/0x210
 [<f8d1d9fe>] ? ext4_ext_find_extent+0x24e/0x2d0 [ext4]
 [<c07bc49e>] ? __pskb_pull_tail+0x6e/0x2b0
 [<f95a6164>] ? vmxnet3_xmit_frame+0xba4/0xef0 [vmxnet3]
 [<c05d15a6>] ? selinux_ip_postroute+0x56/0x320
 [<c0615988>] ? cfq_add_rq_rb+0x98/0x110
 [<c0852df8>] ? packet_rcv+0x48/0x350
 [<c07c5839>] ? dev_queue_xmit_nit+0xc9/0x140
...

Fix it by splitting vmxnet3_parse_and_copy_hdr into two functions:

vmxnet3_parse_hdr, which sets up the internal/on stack ctx datastructure, and
pulls the skb (both of which can be done without holding the spinlock with irqs
disabled

and

vmxnet3_copy_header, which just copies the skb to the tx ring under the lock
safely.

tested and shown to correct the described problem.  Applies cleanly to the head
of the net tree
Signed-off-by: NNeil Horman <nhorman@tuxdriver.com>
CC: Shrikrishna Khare <skhare@vmware.com>
CC: "VMware, Inc." <pv-drivers@vmware.com>
CC: "David S. Miller" <davem@davemloft.net>
Acked-by: NShrikrishna Khare <skhare@vmware.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2016-03-04' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 4.5

iwlwifi

* free firmware paging memory when the module is unloaded or device removed
* fix pending frames counter to fix an issue when removing stations

ssb

* fix a build problem related to ssb_fill_sprom_with_fallback()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MFD_SYSCON depends on HAS_IOMEM so when selecting it avoid unmet
direct dependencies.
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If skb_linearize fails, the driver should drop the packet
instead of trying to copy it into the bounce buffer.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some devices will silently fail setup unless they are reset first.
This is necessary even if the data interface is already in
altsetting 0, which it will be when the device is probed for the
first time.  Briefly toggling the altsetting forces a function
reset regardless of the initial state.

This fixes a setup problem observed on a number of Huawei devices,
appearing to operate in NTB-32 mode even if we explicitly set them
to NTB-16 mode.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In case bind() works, but a later error forces bailing
in probe() in error cases work and a timer may be scheduled.
They must be killed. This fixes an error case related to
the double free reported in
http://www.spinics.net/lists/netdev/msg367669.html
and needs to go on top of Linus' fix to cdc-ncm.
Signed-off-by: NOliver Neukum <ONeukum@suse.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
mlxsw: couple of fixes

Couple of fixes from Ido.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The descriptor queues for sending (SDQs) and receiving (RDQs) packets
are managed by two counters - producer and consumer - which are both
16-bit in size. A queue is considered full when the difference between
the two equals the queue's maximum number of descriptors.

However, if the producer counter overflows, then it's possible for the
full queue check to fail, as it doesn't take the overflow into account.
In such a case, descriptors already passed to the device - but for which
a completion has yet to be posted - will be overwritten, thereby causing
undefined behavior. The above can be achieved under heavy load (~30
netperf instances).

Fix that by casting the subtraction result to u16, preventing it from
being treated as a signed integer.

Fixes: eda6500a ("mlxsw: Add PCI bus implementation")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we only support one VLAN filtering bridge we need to associate a
reference count with it, so that when the last port netdev leaves it, we
would know that a different bridge can be offloaded to hardware.

When a LAG device is memeber in a bridge and port netdevs are leaving
the LAG, we should always decrement the bridge's reference count, as it's
incremented for any port in the LAG.

Fixes: 4dc236c3 ("mlxsw: spectrum: Handle port leaving LAG while bridged")
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 4d5cfcba ('tipc: fix connection abort during subscription
cancel'), removes the check for a valid subscription before calling
tipc_nametbl_subscribe().

This will lead to a nullptr exception when we process a
subscription cancel request. For a cancel request, a null
subscription is passed to tipc_nametbl_subscribe() resulting
in exception.

In this commit, we call tipc_nametbl_subscribe() only for
a valid subscription.

Fixes: 4d5cfcba ('tipc: fix connection abort during subscription cancel')
Reported-by: NAnders Widell <anders.widell@ericsson.com>
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.

Issue detected using static analysis with CoverityScan

Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

priv->mdio->irq used to be allocated and required freeing, but it
is now a fixed sized array and should no longer be free'd.

Issue detected using static analysis with CoverityScan

Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NTobias Klauser <tklauser@distanz.ch>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before calling the destroy() or target() callbacks, the family parameter
field has to be initialized. Otherwise at least the LOG target will
refuse to work and upon removal oops the kernel.

Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NPhil Sutter <phil@nwl.cc>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Used to be allocated and required freeing, but now
priv->mdio->irq is now a fixed sized array and should no longer be
free'd.

Issue detected using static analysis with CoverityScan

Fixes: e7f4dc35 ("mdio: Move allocation of interrupts into core")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enable workaround for MPC8548E erratum eTSEC 106,
"Excess delays when transmitting TOE=1 large frames".
(see commit 53fad773 "gianfar: Enable eTSEC-20 erratum w/a
for P2020 Rev1")

This erratum was fixed in Rev 3.1.x.
Signed-off-by: NAtsushi Nemoto <nemoto@toshiba-tops.co.jp>
Acked-by: NClaudiu Manoil <claudiu.manoil@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-4.5-20160304' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
pull-request: can 2016-03-04

this is a pull request for net/master.

There is one patch from Ed Spiridonov, which increases the performance of the
mcp251x SPI CAN driver, by avoiding to write to error flag register if it's
unnecessary.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only two bits (RX0OVR and RX1OVR) are writable in EFLG, write is useless
if these bits aren't set.
Signed-off-by: NEd Spiridonov <edo.rus@gmail.com>
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>

When the interface is opened (in be_open()) the routine
be_enable_if_filters() must be called to switch on the basic filtering
capabilities of an interface that are not changed at run-time.
These include the flags UNTAGGED, BROADCAST and PASS_L3L4_ERRORS.
Other flags such as MULTICAST and PROMISC must be enabled later by
be_set_rx_mode() based on the state in the netdev/adapter struct.

be_enable_if_filters() routine is wrongly trying to enable MULTICAST flag
without checking the current adapter state. This can cause the RX_FILTER
cmds to the FW to fail.  This patch fixes this problem by only enabling
the basic filtering flags in be_enable_if_filters().

The VF must be able to issue RX_FILTER cmd with any filter flag, as long
as the PF allowed those flags (if_cap_flags) in the iface it provisioned
for the VF. This rule is applicable even when the VF doesn't have the
FILTMGMT privilege. There is a bug in BE3 FW that wrongly fails RX_FILTER
multicast programming cmds on VFs that don't have FILTMGMT privilege.
This patch also helps in insulating the VF driver from be_open failures due
to the FW bug. A fix for the BE3 FW issue will be available in
versions >= 11.0.283.0 and 10.6.334.0
Reported-by: NIvan Vecera <ivecera@redhat.com>
Signed-off-by: NVenkat Duvvuru <venkatkumar.duvvuru@avagotech.com>
Signed-off-by: NSathya Perla <sathya.perla@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We accidentally return IS_ERR(priv->base) which is 1 instead of
PTR_ERR(priv->base) which is the error code.

Fixes: 6c821bd9 ('net: Add MOXA ART SoCs ethernet driver')
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a maintainer entry for FREESCALE FEC ethernet driver and add myself
as a maintainer.
Signed-off-by: NFugang Duan <fugang.duan@nxp.com>
Acked-by: NFrank Li <Frank.Li@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When signalling to metadata consumers that the metadata_dst entry
carries additional GBP extension data for vxlan (TUNNEL_VXLAN_OPT),
the dst's vxlan_metadata information is populated, but options_len
is left to zero. F.e. in ovs, ovs_flow_key_extract() checks for
options_len before extracting the data through ip_tunnel_info_opts_get().

Geneve uses ip_tunnel_info_opts_set() helper in receive path, which
sets options_len internally, vxlan however uses ip_tunnel_info_opts(),
so when filling vxlan_metadata, we do need to update options_len.

Fixes: 4c222798 ("ip-tunnel: Use API to access tunnel metadata options.")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change will also make Coverity happy by avoiding a theoretical NULL
pointer dereference; yet another reason is to use the above helper function
to tighten the code and make it more readable.
Signed-off-by: NWolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Acked-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The ibmvnic_capability struct was defined incorrectly. The last two
elements of the struct are in the wrong order.  In addition, the number
element should be 64-bit. Byteswapping functions are updated
as well.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When ipv6_find_hdr is used to find a fragment header
(caller specifies target NEXTHDR_FRAGMENT) we erronously return
-ENOENT for all fragments with nonzero offset.

Before commit 9195bb8e, when target was specified, we did not
enter the exthdr walk loop as nexthdr == target so this used to work.

Now we do (so we can skip empty route headers). When we then stumble upon
a frag with nonzero frag_off we must return -ENOENT ("header not found")
only if the caller did not specifically request NEXTHDR_FRAGMENT.

This allows nfables exthdr expression to match ipv6 fragments, e.g. via

nft add rule ip6 filter input frag frag-off gt 0

Fixes: 9195bb8e ("ipv6: improve ipv6_find_hdr() to skip empty routing headers")
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MC74xx and EM74xx modules use different IDs by default, according
to the Lenovo EM7455 driver for Windows.
Signed-off-by: NBjørn Mork <bjorn@mork.no>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

reverts commit 94153e36 ("tipc: use existing sk_write_queue for
outgoing packet chain")

In Commit 94153e36, we assume that we fill & empty the socket's
sk_write_queue within the same lock_sock() session.

This is not true if the link is congested. During congestion, the
socket lock is released while we wait for the congestion to cease.
This implementation causes a nullptr exception, if the user space
program has several threads accessing the same socket descriptor.

Consider two threads of the same program performing the following:
     Thread1                                  Thread2
--------------------                    ----------------------
Enter tipc_sendmsg()                    Enter tipc_sendmsg()
lock_sock()                             lock_sock()
Enter tipc_link_xmit(), ret=ELINKCONG   spin on socket lock..
sk_wait_event()                             :
release_sock()                          grab socket lock
    :                                   Enter tipc_link_xmit(), ret=0
    :                                   release_sock()
Wakeup after congestion
lock_sock()
skb = skb_peek(pktchain);
!! TIPC_SKB_CB(skb)->wakeup_pending = tsk->link_cong;

In this case, the second thread transmits the buffers belonging to
both thread1 and thread2 successfully. When the first thread wakeup
after the congestion it assumes that the pktchain is intact and
operates on the skb's in it, which leads to the following exception:

[2102.439969] BUG: unable to handle kernel NULL pointer dereference at 00000000000000d0
[2102.440074] IP: [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc]
[2102.440074] PGD 3fa3f067 PUD 3fa6b067 PMD 0
[2102.440074] Oops: 0000 [#1] SMP
[2102.440074] CPU: 2 PID: 244 Comm: sender Not tainted 3.12.28 #1
[2102.440074] RIP: 0010:[<ffffffffa005f330>]  [<ffffffffa005f330>] __tipc_link_xmit+0x2b0/0x4d0 [tipc]
[...]
[2102.440074] Call Trace:
[2102.440074]  [<ffffffff8163f0b9>] ? schedule+0x29/0x70
[2102.440074]  [<ffffffffa006a756>] ? tipc_node_unlock+0x46/0x170 [tipc]
[2102.440074]  [<ffffffffa005f761>] tipc_link_xmit+0x51/0xf0 [tipc]
[2102.440074]  [<ffffffffa006d8ae>] tipc_send_stream+0x11e/0x4f0 [tipc]
[2102.440074]  [<ffffffff8106b150>] ? __wake_up_sync+0x20/0x20
[2102.440074]  [<ffffffffa006dc9c>] tipc_send_packet+0x1c/0x20 [tipc]
[2102.440074]  [<ffffffff81502478>] sock_sendmsg+0xa8/0xd0
[2102.440074]  [<ffffffff81507895>] ? release_sock+0x145/0x170
[2102.440074]  [<ffffffff815030d8>] ___sys_sendmsg+0x3d8/0x3e0
[2102.440074]  [<ffffffff816426ae>] ? _raw_spin_unlock+0xe/0x10
[2102.440074]  [<ffffffff81115c2a>] ? handle_mm_fault+0x6ca/0x9d0
[2102.440074]  [<ffffffff8107dd65>] ? set_next_entity+0x85/0xa0
[2102.440074]  [<ffffffff816426de>] ? _raw_spin_unlock_irq+0xe/0x20
[2102.440074]  [<ffffffff8107463c>] ? finish_task_switch+0x5c/0xc0
[2102.440074]  [<ffffffff8163ea8c>] ? __schedule+0x34c/0x950
[2102.440074]  [<ffffffff81504e12>] __sys_sendmsg+0x42/0x80
[2102.440074]  [<ffffffff81504e62>] SyS_sendmsg+0x12/0x20
[2102.440074]  [<ffffffff8164aed2>] system_call_fastpath+0x16/0x1b

In this commit, we maintain the skb list always in the stack.
Signed-off-by: NParthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com>
Acked-by: NYing Xue <ying.xue@windriver.com>
Acked-by: NJon Maloy <jon.maloy@ericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The current reserved_tailroom calculation fails to take hlen and tlen into
account.

skb:
[__hlen__|__data____________|__tlen___|__extra__]
^                                               ^
head                                            skb_end_offset

In this representation, hlen + data + tlen is the size passed to alloc_skb.
"extra" is the extra space made available in __alloc_skb because of
rounding up by kmalloc. We can reorder the representation like so:

[__hlen__|__data____________|__extra__|__tlen___]
^                                               ^
head                                            skb_end_offset

The maximum space available for ip headers and payload without
fragmentation is min(mtu, data + extra). Therefore,
reserved_tailroom
= data + extra + tlen - min(mtu, data + extra)
= skb_end_offset - hlen - min(mtu, skb_end_offset - hlen - tlen)
= skb_tailroom - min(mtu, skb_tailroom - tlen) ; after skb_reserve(hlen)

Compare the second line to the current expression:
reserved_tailroom = skb_end_offset - min(mtu, skb_end_offset)
and we can see that hlen and tlen are not taken into account.

The min() in the third line can be expanded into:
if mtu < skb_tailroom - tlen:
	reserved_tailroom = skb_tailroom - mtu
else:
	reserved_tailroom = tlen

Depending on hlen, tlen, mtu and the number of multicast address records,
the current code may output skbs that have less tailroom than
dev->needed_tailroom or it may output more skbs than needed because not all
space available is used.

Fixes: 4c672e4b ("ipv6: mld: fix add_grhead skb_over_panic for devs with large MTUs")
Signed-off-by: NBenjamin Poirier <bpoirier@suse.com>
Acked-by: NHannes Frederic Sowa <hannes@stressinduktion.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, in a case of error, dev_err is using fman->dev
before its initialization and "(NULL device *)" is printed.
This patch fixes this issue.
Signed-off-by: NIgal Liberman <igal.liberman@freescale.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch manages the case when you have an Ethernet MAC with
a "fixed link", and not connected to a normal MDIO-managed PHY device.

The test of phy_bus_name was not helpful because it was never affected
and replaced by the mdio test node.
Signed-off-by: NGabriel Fernandez <gabriel.fernandez@linaro.org>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Lars Persson says:

====================
dwc_eth_qos: stability fixes and support for CMA

This series has bug fixes for the dwc_eth_qos ethernet driver.

Mainly two stability fixes for problems found by Rabin Vincent:
- Successive starts and stops of the interface would trigger a DMA reset timeout.
- A race condition in the TX DMA handling could trigger a netdev watchdog
 timeout.

The memory allocation was improved to support use of the CMA as DMA allocator
backend.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This reverts the changed init order from commit 3647bc35
("dwc_eth_qos: Reset hardware before PHY start") and makes another fix
for the race.

It turned out that the reset state machine of the dwceqos hardware
requires PHY clocks to be present in order to complete the reset
cycle.

To plug the race with the phy state machine we defer link speed
setting until the hardware init has finished.
Signed-off-by: NLars Persson <larper@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since debug is hardcoded to 3, the defaults in the DWCEQOS_MSG_DEFAULT
macro are never used, which does not seem to be the intended behaviour
here.  Set debug to -1 like other drivers so that DWCEQOS_MSG_DEFAULT is
actually used by default.
Signed-off-by: NRabin Vincent <rabinv@axis.com>
Signed-off-by: NLars Persson <larper@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since we are in non-atomic context here we can pass GFP_KERNEL to
dma_alloc_coherent(). This enables use of the CMA.
Signed-off-by: NRabin Vincent <rabinv@axis.com>
Signed-off-by: NLars Persson <larper@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To prepare for using the CMA, we can not be in atomic context when
de-allocating DMA buffers.

The tx lock was needed only to protect the hw reset against the xmit
handler. Now we briefly grab the tx lock while stopping the queue to
make sure no thread is inside or will enter the xmit handler.
Signed-off-by: NLars Persson <larper@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The xmit handler and the tx_reclaim tasklet had a race on the tx_free
variable which could lead to a tx timeout if tx_free was updated after
the tx complete interrupt.
Signed-off-by: NRabin Vincent <rabinv@axis.com>
Signed-off-by: NLars Persson <larper@axis.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>