We must not close the subflows before all the MPTCP level
data, comprising the DATA_FIN has been acked at the MPTCP
level, otherwise we could be unable to retransmit as needed.

__mptcp_wr_shutdown() shutdown is responsible to check for the
correct status and close all subflows. Is called by the output
path after spooling any data and at shutdown/close time.

In a similar way, __mptcp_destroy_sock() is responsible to clean-up
the MPTCP level status, and is called when the msk transition
to TCP_CLOSE.

The protocol level close() does not force anymore the TCP_CLOSE
status, but orphan the msk socket and all the subflows.
Orphaned msk sockets are forciby closed after a timeout or
when all MPTCP-level data is acked.

There is a caveat about keeping the orphaned subflows around:
the TCP stack can asynchronusly call tcp_cleanup_ulp() on them via
tcp_close(). To prevent accessing freed memory on later MPTCP
level operations, the msk acquires a reference to each subflow
socket and prevent subflow_ulp_release() from releasing the
subflow context before __mptcp_destroy_sock().

The additional subflow references are released by __mptcp_done()
and the async ULP release is detected checking ULP ops. If such
field has been already cleared by the ULP release path, the
dangling context is freed directly by __mptcp_done().
Co-developed-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Track the next MPTCP sequence number used on xmit,
currently always equal to write_next.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Preparation patch to track the data pending in the msk
write queue. No functional change introduced here
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

remove some of code duplications an allow preventing
rescheduling on close.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

This patch added a new sysctl, named add_addr_timeout, to control the
timeout value (in seconds) of the ADD_ADDR retransmission.
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The msk can close MP_JOIN subflows if the initial handshake
fails. Currently such subflows are kept alive in the
conn_list until the msk itself is closed.

Beyond the wasted memory, we could end-up sending the
DATA_FIN and the DATA_FIN ack on such socket, even after a
reset.

Fixes: 43b54c6e ("mptcp: Use full MPTCP-level disconnect state machine")
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

Additional/MP_JOIN subflows that do not pass some initial handshake
tests currently causes fallback to TCP. That is an RFC violation:
we should instead reset the subflow and leave the the msk untouched.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/91
Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests")
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

using packetdrill it's possible to observe the same MPTCP DSN being acked
by different subflows with DACK4 and DACK8. This is in contrast with what
specified in RFC8684 §3.3.2: if an MPTCP endpoint transmits a 64-bit wide
DSN, it MUST be acknowledged with a 64-bit wide DACK. Fix 'use_64bit_ack'
variable to make it a property of MPTCP sockets, not TCP subflows.

Fixes: a0c1d0ea ("mptcp: Use 32-bit DATA_ACK when possible")
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NJakub Kicinski <kuba@kernel.org>

The MPTCP ADD_ADDR suboption with echo-flag=1 has no HMAC, the size is
smaller than the one initially sent without echo-flag=1. We then need to
use the correct size everywhere when we need this echo bit.

Before this patch, the wrong size was reserved but the correct amount of
bytes were written (and read): the remaining bytes contained garbage.

Fixes: 6a6c05a8 ("mptcp: send out ADD_ADDR with echo flag")
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/95Reported-and-tested-by: NDavide Caratti <dcaratti@redhat.com>
Acked-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The peer may send a DATA_FIN mapping with either a 32-bit or 64-bit
sequence number. When a 32-bit sequence number is received for the
DATA_FIN, it must be expanded to 64 bits before comparing it to the
last acked sequence number. This expansion was missing.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/93
Fixes: 3721b9b6 ("mptcp: Track received DATA_FIN sequence number and add related helpers")
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implemented the retransmition of ADD_ADDR when no ADD_ADDR echo
is received. It added a timer with the announced address. When timeout
occurs, ADD_ADDR will be retransmitted.
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added a new helper named mptcp_destroy_common containing the
shared code between mptcp_destroy() and mptcp_sock_destruct().
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implemented the local subflow removing function,
mptcp_pm_remove_subflow, it simply called mptcp_pm_nl_rm_subflow_received
under the PM spin lock.

We use mptcp_pm_remove_subflow to remove a local subflow, so change it's
argument from remote_id to local_id.

We check subflow->local_id in mptcp_pm_nl_rm_subflow_received to remove
a subflow.
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch implements the remove announced addr and subflow logic in PM
netlink.

When the PM netlink removes an address, we traverse all the existing msk
sockets to find the relevant sockets.

We add a new list named anno_list in mptcp_pm_data, to record all the
announced addrs. In the traversing, we check if it has been recorded.
If it has been, we trigger the RM_ADDR signal.

We also check if this address is in conn_list. If it is, we remove the
subflow which using this local address.

Since we call mptcp_pm_free_anno_list in mptcp_destroy, we need to move
__mptcp_init_sock before the mptcp_is_enabled check in mptcp_init_sock.
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Acked-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the ADD_ADDR suboption has been received, we need to send out the same
ADD_ADDR suboption with echo-flag=1, and no HMAC.
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added the RM_ADDR option parsing logic:

We parsed the incoming options to find if the rm_addr option is received,
and called mptcp_pm_rm_addr_received to schedule PM work to a new status,
named MPTCP_PM_RM_ADDR_RECEIVED.

PM work got this status, and called mptcp_pm_nl_rm_addr_received to handle
it.

In mptcp_pm_nl_rm_addr_received, we closed the subflow matching the rm_id,
and updated PM counter.
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Suggested-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch added a new signal named rm_addr_signal in PM. On outgoing path,
we called mptcp_pm_should_rm_signal to check if rm_addr_signal has been
set. If it has been, we sent out the RM_ADDR option.
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch renamed addr_signal and the related functions with the explicit
word "add".
Suggested-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the scheduler to less trivial heuristic: cache
the last used subflow, and try to send on it a reasonably
long burst of data.

When the burst or the subflow send space is exhausted, pick
the subflow with the lower ratio between write space and
send buffer - that is, the subflow with the greater relative
amount of free space.

v1 -> v2:
 - fix 32 bit build breakage due to 64bits div
 - fix checkpath issues (uint64_t -> u64)
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

So that can be accessed easily from the subflow creation
helper. No functional change intended.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is no need to use the tcp_read_sock(), we can
simply drop the skb. Additionally try to look at the
next buffer for in order data.

This both simplifies the code and avoid unneeded indirect
calls.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add an RB-tree to cope with OoO (at MPTCP level) data.
__mptcp_move_skb() insert into the RB tree "future"
data, eventually coalescing skb as allowed by the
MPTCP DSN.

To simplify sequence accounting, move the DSN inside
the cb.

After successfully enqueuing in sequence data, check
if we can use any data from the RB tree.

Additionally move the data_fin check after spooling
data from the OoO tree, otherwise we could miss shutdown
events.

The RB tree code is copied as verbatim as possible
from tcp_data_queue_ofo(), with a few simplifications
due to the fact that MPTCP doesn't need to cope with
sacks. All bugs here are added by me.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a prerequisite to allow receiving data from multiple
subflows without re-injection.

Instead of dropping the OoO - "future" data in
subflow_check_data_avail(), call into __mptcp_move_skbs()
and let the msk drop that.

To avoid code duplication factor out the mptcp_subflow_discard_data()
helper.

Note that __mptcp_move_skbs() can now find multiple subflows
with data avail (comprising to-be-discarded data), so must
update the byte counter incrementally.

v1 -> v2:
 - fix checkpatch issues (unsigned -> unsigned int)
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

JOIN requests do not work in syncookie mode -- for HMAC validation, the
peers nonce and the mptcp token (to obtain the desired connection socket
the join is for) are required, but this information is only present in the
initial syn.

So either we need to drop all JOIN requests once a listening socket enters
syncookie mode, or we need to store enough state to reconstruct the request
socket later.

This adds a state table (1024 entries) to store the data present in the
MP_JOIN syn request and the random nonce used for the cookie syn/ack.

When a MP_JOIN ACK passed cookie validation, the table is consulted
to rebuild the request socket from it.

An alternate approach would be to "cancel" syn-cookie mode and force
MP_JOIN to always use a syn queue entry.

However, doing so brings the backlog over the configured queue limit.

v2: use req->syncookie, not (removed) want_cookie arg
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Will be used to initialize the mptcp request socket when a MP_CAPABLE
request was handled in syncookie mode, i.e. when a TCP ACK containing a
MP_CAPABLE option is a valid syncookie value.

Normally (non-cookie case), MPTCP will generate a unique 32 bit connection
ID and stores it in the MPTCP token storage to be able to retrieve the
mptcp socket for subflow joining.

In syncookie case, we do not want to store any state, so just generate the
unique ID and use it in the reply.

This means there is a small window where another connection could generate
the same token.

When Cookie ACK comes back, we check that the token has not been registered
in the mean time.  If it was, the connection needs to fall back to TCP.

Changes in v2:
 - use req->syncookie instead of passing 'want_cookie' arg to ->init_req()
   (Eric Dumazet)
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Incoming DATA_FIN headers need to propagate the presence of the DATA_FIN
bit and the associated sequence number to the MPTCP layer, even when
arriving on a bare ACK that does not get added to the receive queue. Add
structure members to store the DATA_FIN information and helpers to set
and check those values.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since DATA_FIN information is the same for every subflow, store it only
in the mptcp_sock.
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently accepted msk sockets become established only after
accept() returns the new sk to user-space.

As MP_JOIN request are refused as per RFC spec on non fully
established socket, the above causes mp_join self-tests
instabilities.

This change lets the msk entering the established status
as soon as it receives the 3rd ack and propagates the first
subflow fully established status on the msk socket.

Finally we can change the subflow acceptance condition to
take in account both the sock state and the msk fully
established flag.
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Tested-by: NChristoph Paasch <cpaasch@apple.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only used in token.c.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

mptcp_token_iter_next() allow traversing all the MPTCP
sockets inside the token container belonging to the given
network namespace with a quite standard iterator semantic.

That will be used by the next patch, but keep the API generic,
as we plan to use this later for PM's sake.

Additionally export mptcp_token_get_sock(), as it also
will be used by the diag module.
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We can re-use the existing work queue to handle path management
instead of a dedicated work queue.  Just move pm_worker to protocol.c,
call it from the mptcp worker and get rid of the msk lock (already held).
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When mptcp is used, userspace doesn't read from the tcp (subflow)
socket but from the parent (mptcp) socket receive queue.

skbs are moved from the subflow socket to the mptcp rx queue either from
'data_ready' callback (if mptcp socket can be locked), a work queue, or
the socket receive function.

This means tcp_rcv_space_adjust() is never called and thus no receive
buffer size auto-tuning is done.

An earlier (not merged) patch added tcp_rcv_space_adjust() calls to the
function that moves skbs from subflow to mptcp socket.
While this enabled autotuning, it also meant tuning was done even if
userspace was reading the mptcp socket very slowly.

This adds mptcp_rcv_space_adjust() and calls it after userspace has
read data from the mptcp socket rx queue.

Its very similar to tcp_rcv_space_adjust, with two differences:

1. The rtt estimate is the largest one observed on a subflow
2. The rcvbuf size and window clamp of all subflows is adjusted
   to the mptcp-level rcvbuf.

Otherwise, we get spurious drops at tcp (subflow) socket level if
the skbs are not moved to the mptcp socket fast enough.

Before:
time mptcp_connect.sh -t -f $((4*1024*1024)) -d 300 -l 0.01% -r 0 -e "" -m mmap
[..]
ns4 MPTCP -> ns3 (10.0.3.2:10108      ) MPTCP   (duration 40823ms) [ OK ]
ns4 MPTCP -> ns3 (10.0.3.2:10109      ) TCP     (duration 23119ms) [ OK ]
ns4 TCP   -> ns3 (10.0.3.2:10110      ) MPTCP   (duration  5421ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP   (duration 41446ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP     (duration 23427ms) [ OK ]
ns4 TCP   -> ns3 (dead:beef:3::2:10113) MPTCP   (duration  5426ms) [ OK ]
Time: 1396 seconds

After:
ns4 MPTCP -> ns3 (10.0.3.2:10108      ) MPTCP   (duration  5417ms) [ OK ]
ns4 MPTCP -> ns3 (10.0.3.2:10109      ) TCP     (duration  5427ms) [ OK ]
ns4 TCP   -> ns3 (10.0.3.2:10110      ) MPTCP   (duration  5422ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10111) MPTCP   (duration  5415ms) [ OK ]
ns4 MPTCP -> ns3 (dead:beef:3::2:10112) TCP     (duration  5422ms) [ OK ]
ns4 TCP   -> ns3 (dead:beef:3::2:10113) MPTCP   (duration  5423ms) [ OK ]
Time: 296 seconds
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Reviewed-by: NMatthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

when a MPTCP client tries to connect to itself, tcp_finish_connect() is
never reached. Because of this, depending on the socket current state,
multiple faulty behaviours can be observed:

1) a WARN_ON() in subflow_data_ready() is hit
 WARNING: CPU: 2 PID: 882 at net/mptcp/subflow.c:911 subflow_data_ready+0x18b/0x230
 [...]
 CPU: 2 PID: 882 Comm: gh35 Not tainted 5.7.0+ #187
 [...]
 RIP: 0010:subflow_data_ready+0x18b/0x230
 [...]
 Call Trace:
  tcp_data_queue+0xd2f/0x4250
  tcp_rcv_state_process+0xb1c/0x49d3
  tcp_v4_do_rcv+0x2bc/0x790
  __release_sock+0x153/0x2d0
  release_sock+0x4f/0x170
  mptcp_shutdown+0x167/0x4e0
  __sys_shutdown+0xe6/0x180
  __x64_sys_shutdown+0x50/0x70
  do_syscall_64+0x9a/0x370
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

2) client is stuck forever in mptcp_sendmsg() because the socket is not
   TCP_ESTABLISHED

 crash> bt 4847
 PID: 4847   TASK: ffff88814b2fb100  CPU: 1   COMMAND: "gh35"
  #0 [ffff8881376ff680] __schedule at ffffffff97248da4
  #1 [ffff8881376ff778] schedule at ffffffff9724a34f
  #2 [ffff8881376ff7a0] schedule_timeout at ffffffff97252ba0
  #3 [ffff8881376ff8a8] wait_woken at ffffffff958ab4ba
  #4 [ffff8881376ff940] sk_stream_wait_connect at ffffffff96c2d859
  #5 [ffff8881376ffa28] mptcp_sendmsg at ffffffff97207fca
  #6 [ffff8881376ffbc0] sock_sendmsg at ffffffff96be1b5b
  #7 [ffff8881376ffbe8] sock_write_iter at ffffffff96be1daa
  #8 [ffff8881376ffce8] new_sync_write at ffffffff95e5cb52
  #9 [ffff8881376ffe50] vfs_write at ffffffff95e6547f
 #10 [ffff8881376ffe90] ksys_write at ffffffff95e65d26
 #11 [ffff8881376fff28] do_syscall_64 at ffffffff956088ba
 #12 [ffff8881376fff50] entry_SYSCALL_64_after_hwframe at ffffffff9740008c
     RIP: 00007f126f6956ed  RSP: 00007ffc2a320278  RFLAGS: 00000217
     RAX: ffffffffffffffda  RBX: 0000000020000044  RCX: 00007f126f6956ed
     RDX: 0000000000000004  RSI: 00000000004007b8  RDI: 0000000000000003
     RBP: 00007ffc2a3202a0   R8: 0000000000400720   R9: 0000000000400720
     R10: 0000000000400720  R11: 0000000000000217  R12: 00000000004004b0
     R13: 00007ffc2a320380  R14: 0000000000000000  R15: 0000000000000000
     ORIG_RAX: 0000000000000001  CS: 0033  SS: 002b

3) tcpdump captures show that DSS is exchanged even when MP_CAPABLE handshake
   didn't complete.

 $ tcpdump -tnnr bad.pcap
 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [S], seq 3208913911, win 65483, options [mss 65495,sackOK,TS val 3291706876 ecr 3291694721,nop,wscale 7,mptcp capable v1], length 0
 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [S.], seq 3208913911, ack 3208913912, win 65483, options [mss 65495,sackOK,TS val 3291706876 ecr 3291706876,nop,wscale 7,mptcp capable v1], length 0
 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [.], ack 1, win 512, options [nop,nop,TS val 3291706876 ecr 3291706876], length 0
 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [F.], seq 1, ack 1, win 512, options [nop,nop,TS val 3291707876 ecr 3291706876,mptcp dss fin seq 0 subseq 0 len 1,nop,nop], length 0
 IP 127.0.0.1.20000 > 127.0.0.1.20000: Flags [.], ack 2, win 512, options [nop,nop,TS val 3291707876 ecr 3291707876], length 0

force a fallback to TCP in these cases, and adjust the main socket
state to avoid hanging in mptcp_sendmsg().

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/35Reported-by: NChristoph Paasch <cpaasch@apple.com>
Suggested-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Keep using MPTCP sockets and a use "dummy mapping" in case of fallback
to regular TCP. When fallback is triggered, skip addition of the MPTCP
option on send.

Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/11
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/22Co-developed-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Signed-off-by: NDavide Caratti <dcaratti@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the radix tree with a hash table allocated
at boot time. The radix tree has some shortcoming:
a single lock is contented by all the mptcp operation,
the lookup currently use such lock, and traversing
all the items would require a lock, too.

With hash table instead we trade a little memory to
address all the above - a per bucket lock is used.

To hash the MPTCP sockets, we re-use the msk' sk_node
entry: the MPTCP sockets are never hashed by the stack.
Replace the existing hash proto callbacks with a dummy
implementation, annotating the above constraint.

Additionally refactor the token creation to code to:

- limit the number of consecutive attempts to a fixed
maximum. Hitting a hash bucket with a long chain is
considered a failed attempt

- accept() no longer can fail to token management.

- if token creation fails at connect() time, we do
fallback to TCP (before the connection was closed)

v1 -> v2:
 - fix "no newline at end of file" - Jakub
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the missing annotation in some setup-only
functions.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Declare ipv4_specific once, in tcp.h were it belongs.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ipv6_specific should be declared in tcp include files,
not mptcp.

This removes the following warning :
  CHECK   net/ipv6/tcp_ipv6.c
net/ipv6/tcp_ipv6.c:78:42: warning: symbol 'ipv6_specific' was not declared. Should it be static?
Signed-off-by: NEric Dumazet <edumazet@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The msk ownership is transferred to the child socket at
3rd ack time, so that we avoid more lookups later. If the
request does not reach the 3rd ack, the MSK reference is
dropped at request sock release time.

As a side effect, fallback is now tracked by a NULL msk
reference instead of zeroed 'mp_join' field. This will
simplify the next patch.
Signed-off-by: NPaolo Abeni <pabeni@redhat.com>
Reviewed-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use list_first_entry_or_null to simplify the code.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>