This reverts commit 84be8805, which itself reverted my original
attempt to move x86 from #include'ing .c files from across the tree
to using the EFI stub built as a static library.

The issue that affected the original approach was that splitting
the implementation into several .o files resulted in the variable
'efi_early' becoming a global with external linkage, which under
-fPIC implies that references to it must go through the GOT. However,
dealing with this additional GOT entry turned out to be troublesome
on some EFI implementations. (GCC's visibility=hidden attribute is
supposed to lift this requirement, but it turned out not to work on
the 32-bit build.)

Instead, use a pure getter function to get a reference to efi_early.
This approach results in no additional GOT entries being generated,
so there is no need for any changes in the early GOT handling.
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

All other calls to allocate memory seem to make some noise already, with the
exception of two calls (for gop, uga) in the setup_graphics path.

The purpose is to be noisy on worrysome errors immediately.

commit fb86b244 ("x86/efi: Add better error logging to EFI boot
stub") introduces printing false alarms for lots of hardware. Rather
than playing Whack a Mole with non-fatal exit conditions, try the other
way round.

This is per Matt Fleming's suggestion:

> Where I think we could improve things
> is by adding efi_printk() message in certain error paths. Clearly, not
> all error paths need such messages, e.g. the EFI_INVALID_PARAMETER path
> you highlighted above, but it makes sense for memory allocation and PCI
> read failures.

Link: http://article.gmane.org/gmane.linux.kernel.efi/4628Signed-off-by: NAndre Müller <andre.muller@web.de>
Cc: Ulf Winkelvos <ulf@winkelvos.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We need a way to customize the behaviour of the EFI boot stub, in
particular, we need a way to disable the "chunking" workaround, used
when reading files from the EFI System Partition.

One of my machines doesn't cope well when reading files in 1MB chunks to
a buffer above the 4GB mark - it appears that the "chunking" bug
workaround triggers another firmware bug. This was only discovered with
commit 4bf7111f ("x86/efi: Support initrd loaded above 4G"), and
that commit is perfectly valid. The symptom I observed was a corrupt
initrd rather than any kind of crash.

efi= is now used to specify EFI parameters in two very different
execution environments, the EFI boot stub and during kernel boot.

There is also a slight performance optimization by enabling efi=nochunk,
but that's offset by the fact that you're more likely to run into
firmware issues, at least on x86. This is the rationale behind leaving
the workaround enabled by default.

Also provide some documentation for EFI_READ_CHUNK_SIZE and why we're
using the current value of 1MB.
Tested-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Roy Franz <roy.franz@linaro.org>
Cc: Maarten Lankhorst <m.b.lankhorst@gmail.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Cc: Borislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

If we're executing the 32-bit efi_char16_printk() code path (i.e.
running on top of 32-bit firmware) we know that efi_early->text_output
will be a 32-bit value, even though ->text_output has type u64.

Unfortunately, we currently pass ->text_output directly to
efi_early->call() so for CONFIG_X86_32 the compiler will push a 64-bit
value onto the stack, causing the other parameters to be misaligned.

The way we handle this in the rest of the EFI boot stub is to pass
pointers as arguments to efi_early->call(), which automatically do the
right thing (pointers are 32-bit on CONFIG_X86_32, and we simply ignore
the upper 32-bits of the argument register if running in 64-bit mode
with 32-bit firmware).

This fixes a corruption bug when printing strings from the 32-bit EFI
boot stub.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=84241Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

A number of people are reporting seeing the "setup_efi_pci() failed!"
error message in what used to be a quiet boot,

  https://bugzilla.kernel.org/show_bug.cgi?id=81891

The message isn't all that helpful because setup_efi_pci() can return a
non-success error code for a variety of reasons, not all of them fatal.

Let's drop the return code from setup_efi_pci*() altogether, since
there's no way to process it in any meaningful way outside of the inner
__setup_efi_pci*() functions.
Reported-by: NDarren Hart <dvhart@linux.intel.com>
Reported-by: NJosh Boyer <jwboyer@fedoraproject.org>
Cc: Ulf Winkelvos <ulf@winkelvos.de>
Cc: Andre Müller <andre.muller@web.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This reverts commit f23cf8bd ("efi/x86: efistub: Move shared
dependencies to <asm/efi.h>") as well as the x86 parts of commit
f4f75ad5 ("efi: efistub: Convert into static library").

The road leading to these two reverts is long and winding.

The above two commits were merged during the v3.17 merge window and
turned the common EFI boot stub code into a static library. This
necessitated making some symbols global in the x86 boot stub which
introduced new entries into the early boot GOT.

The problem was that we weren't fixing up the newly created GOT entries
before invoking the EFI boot stub, which sometimes resulted in hangs or
resets. This failure was reported by Maarten on his Macbook pro.

The proposed fix was commit 9cb0e394 ("x86/efi: Fixup GOT in all
boot code paths"). However, that caused issues for Linus when booting
his Sony Vaio Pro 11. It was subsequently reverted in commit
f3670394.

So that leaves us back with Maarten's Macbook pro not booting.

At this stage in the release cycle the least risky option is to revert
the x86 EFI boot stub to the pre-merge window code structure where we
explicitly #include efi-stub-helper.c instead of linking with the static
library. The arm64 code remains unaffected.

We can take another swing at the x86 parts for v3.18.

Conflicts:
	arch/x86/include/asm/efi.h
Tested-by: NJosh Boyer <jwboyer@fedoraproject.org>
Tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Tested-by: Leif Lindholm <leif.lindholm@linaro.org> [arm64]
Tested-by: NLinus Torvalds <torvalds@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>,
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Mantas found that after commit 4bf7111f ("x86/efi: Support initrd
loaded above 4G"), the kernel freezes at the earliest possible moment
when trying to boot via UEFI on Asus laptop.

Revert to old way to load initrd under 4G on first try, second try will
use above 4G buffer when initrd is too big and does not fit under 4G.

[ The cause of the freeze appears to be a firmware bug when reading
  file data into buffers above 4GB, though the exact reason is unknown.
  Mantas reports that the hang can be avoid if the file size is a
  multiple of 512 bytes, but I've seen some ASUS firmware simply
  corrupting the file data rather than freezing.

  Laszlo fixed an issue in the upstream EDK2 DiskIO code in Aug 2013
  which may possibly be related, commit 4e39b75e ("MdeModulePkg/DiskIoDxe:
  fix source/destination pointer of overrun transfer").

  Whatever the cause, it's unlikely that a fix will be forthcoming
  from the vendor, hence the workaround - Matt ]

Cc: Laszlo Ersek <lersek@redhat.com>
Reported-by: NMantas Mikulėnas <grawity@gmail.com>
Reported-by: NHarald Hoyer <harald@redhat.com>
Tested-by: NAnders Darander <anders@chargestorm.se>
Tested-by: NCalvin Walton <calvin.walton@kepstin.ca>
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Hopefully this will enable us to better debug:
https://bugzilla.kernel.org/show_bug.cgi?id=68761Signed-off-by: NUlf Winkelvos <ulf@winkelvos.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch changes both x86 and arm64 efistub implementations
from #including shared .c files under drivers/firmware/efi to
building shared code as a static library.

The x86 code uses a stub built into the boot executable which
uncompresses the kernel at boot time. In this case, the library is
linked into the decompressor.

In the arm64 case, the stub is part of the kernel proper so the library
is linked into the kernel proper as well.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

In order to move from the #include "../../../xxxxx.c" anti-pattern used
by both the x86 and arm64 versions of the stub to a static library
linked into either the kernel proper (arm64) or a separate boot
executable (x86), there is some prepatory work required.

This patch does the following:
- move forward declarations of functions shared between the arch
  specific and the generic parts of the stub to include/linux/efi.h
- move forward declarations of functions shared between various .c files
  of the generic stub code to a new local header file called "efistub.h"
- add #includes to all .c files which were formerly relying on the
  #includor to include the correct header files
- remove all static modifiers from functions which will need to be
  externally visible once we move to a static library
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This moves definitions depended upon both by code under arch/x86/boot
and under drivers/firmware/efi to <asm/efi.h>. This is in preparation of
turning the stub code under drivers/firmware/efi into a static library.
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

For boot efi kernel directly without bootloader.
If the kernel support XLF_CAN_BE_LOADED_ABOVE_4G, we should
not limit initrd under hdr->initrd_add_max.
Signed-off-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Instead of truncating UTF-16 assuming all characters is ASCII,
properly convert it to UTF-8.
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
[ Bug and style fixes. ]
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NLeif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We're currently passing the file handle for the root file system to
efi_file_read() and efi_file_close(), instead of the file handle for the
file we wish to read/close.

While this has worked up until now, it seems that it has only been by
pure luck. Olivier explains,

 "The issue is the UEFI Fat driver might return the same function for
  'fh->read()' and 'h->read()'. While in our case it does not work with
  a different implementation of EFI_SIMPLE_FILE_SYSTEM_PROTOCOL. In our
  case, we return a different pointer when reading a directory and
  reading a file."

Fixing this actually clears up the two functions because we can drop one
of the arguments, and instead only pass a file 'handle' argument.
Reported-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NOlivier Martin <olivier.martin@arm.com>
Reviewed-by: NMark Rutland <mark.rutland@arm.com>
Cc: Leif Lindholm <leif.lindholm@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

code32_start should point at the start of the protected mode code, and
*not* at the beginning of the bzImage. This is much easier to do in
assembly so document that callers of make_boot_params() need to fill out
code32_start.

The fallout from this bug is that we would end up relocating the image
but copying the image at some offset, resulting in what appeared to be
memory corruption.
Reported-by: NThomas Bächler <thomas@archlinux.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

commit 54b52d87 ("x86/efi: Build our own EFI services pointer
table") introduced a regression because the 64-bit file_size()
implementation passed a pointer to a 32-bit data object, instead of a
pointer to a 64-bit object.

Because the firmware treats the object as 64-bits regardless it was
reading random values from the stack for the upper 32-bits.

This resulted in people being unable to boot their machines, after
seeing the following error messages,

    Failed to get file info size
    Failed to alloc highmem for files
Reported-by: NDzmitry Sledneu <dzmitry.sledneu@gmail.com>
Reported-by: NKoen Kooi <koen@dominion.thruhere.net>
Tested-by: NKoen Kooi <koen@dominion.thruhere.net>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The ARM EFI boot stub doesn't need to care about the efi_early
infrastructure that x86 requires in order to do mixed mode thunking. So
wrap everything up in an efi_call_early() macro.

This allows x86 to do the necessary indirection jumps to call whatever
firmware interface is necessary (native or mixed mode), but also allows
the ARM folks to mask the fact that they don't support relocation in the
boot stub and need to pass 'sys_table_arg' to every function.

[ hpa: there are no object code changes from this patch ]
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>
Link: http://lkml.kernel.org/r/20140326091011.GB2958@console-pimps.org
Cc: Roy Franz <roy.franz@linaro.org>
Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>

The EFI handover code only works if the "bitness" of the firmware and
the kernel match, i.e. 64-bit firmware and 64-bit kernel - it is not
possible to mix the two. This goes against the tradition that a 32-bit
kernel can be loaded on a 64-bit BIOS platform without having to do
anything special in the boot loader. Linux distributions, for one thing,
regularly run only 32-bit kernels on their live media.

Despite having only one 'handover_offset' field in the kernel header,
EFI boot loaders use two separate entry points to enter the kernel based
on the architecture the boot loader was compiled for,

    (1) 32-bit loader: handover_offset
    (2) 64-bit loader: handover_offset + 512

Since we already have two entry points, we can leverage them to infer
the bitness of the firmware we're running on, without requiring any boot
loader modifications, by making (1) and (2) valid entry points for both
CONFIG_X86_32 and CONFIG_X86_64 kernels.

To be clear, a 32-bit boot loader will always use (1) and a 64-bit boot
loader will always use (2). It's just that, if a single kernel image
supports (1) and (2) that image can be used with both 32-bit and 64-bit
boot loaders, and hence both 32-bit and 64-bit EFI.

(1) and (2) must be 512 bytes apart at all times, but that is already
part of the boot ABI and we could never change that delta without
breaking existing boot loaders anyhow.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Make the decision which code path to take at runtime based on
efi_early->is64.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

It's not possible to dereference the EFI System table directly when
booting a 64-bit kernel on a 32-bit EFI firmware because the size of
pointers don't match.

In preparation for supporting the above use case, build a list of
function pointers on boot so that callers don't have to worry about
converting pointer sizes through multiple levels of indirection.
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The problem in efi_main was that the idt was cleared before the
interrupts were disabled.

The UEFI spec states that interrupts aren't used so this shouldn't be
too much of a problem. Peripherals however don't necessarily know about
this and thus might cause interrupts to happen anyway. Even if
ExitBootServices() has been called.

This means there is a risk of an interrupt being triggered while the IDT
register is nullified and the interrupt bit hasn't been cleared,
allowing for a triple fault.

This patch disables the interrupt flag, while leaving the existing IDT
in place. The CPU won't care about the IDT at all as long as the
interrupt bit is off, so it's safe to leave it in place as nothing will
ever happen to it.

[ Removed the now unused 'idt' variable - Matt ]
Signed-off-by: NBart Kuivenhoven <bemk@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch fixes a problem with EFI memory maps larger than 128 entries
when booting using the EFI stub, which results in overflowing e820_map
in boot_params and an eventual halt when checking the map size in
sanitize_e820_map().

If the number of map entries is greater than what can fit in e820_map,
add the extra entries to the setup_data list using type SETUP_E820_EXT.
These extra entries are then picked up when the setup_data list is
parsed in parse_e820_ext().
Signed-off-by: NLinn Crosetto <linn@hp.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The handle_cmdline_files now takes the option to handle as a string,
and returns the loaded data through parameters, rather than taking
an x86 specific setup_header structure.  For ARM, this will be used
to load a device tree blob in addition to initrd images.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Make efi_free() safely callable with size of 0, similar to free() being
callable with NULL pointers, and do nothing in that case.
Remove size checks that this makes redundant.  This also avoids some
size checks in the ARM EFI stub code that will be added as well.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Replace the open-coded memory map getting with the
efi_get_memory_map() that is now general enough to use.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Move the open-coded conversion to a shared function for
use by all architectures.  Change the allocation to prefer
a high address for ARM, as this is required to avoid conflicts
with reserved regions in low memory.  We don't know the specifics
of these regions until after we process the command line and
device tree.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Rename relocate_kernel() to efi_relocate_kernel(), and take
parameters rather than x86 specific structure.  Add max_addr
argument as for ARM we have some address constraints that we
need to enforce when relocating the kernel.  Add alloc_size
parameter for use by ARM64 which uses an uncompressed kernel,
and needs to allocate space for BSS.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The relocate_kernel() function will be generalized and used
by all architectures, as they all have similar requirements.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Rename them to be more similar, as low_free() could be used to free
memory allocated by both high_alloc() and low_alloc().
high_alloc() -> efi_high_alloc()
low_alloc()  -> efi_low_alloc()
low_free()   -> efi_free()
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Add system table pointer argument to shared EFI stub related functions
so they no longer use a global system table pointer as they did when part
of eboot.c.  For the ARM EFI stub this allows us to avoid global
variables completely and thereby not have to deal with GOT fixups.
Not having the EFI stub fixup its GOT, which is shared with the
decompressor, simplifies the relocating of the zImage to a
bootable address.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

No code changes made, just moving functions and #define from x86 arch
directory to common location.  Code is shared using #include, similar
to how decompression code is shared among architectures.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Acked-by: NMark Salter <msalter@redhat.com>
Reviewed-by: NGrant Likely <grant.likely@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Specify memory size in pages, not bytes.
Signed-off-by: NRoy Franz <roy.franz@linaro.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

ExitBootServices is absolutely supposed to return a failure if any
ExitBootServices event handler changes the memory map.  Basically the
get_map loop should run again if ExitBootServices returns an error the
first time.  I would say it would be fair that if ExitBootServices gives
an error the second time then Linux would be fine in returning control
back to BIOS.

The second change is the following line:

again:
        size += sizeof(*mem_map) * 2;

Originally you were incrementing it by the size of one memory map entry.
The issue here is all related to the low_alloc routine you are using.
In this routine you are making allocations to get the memory map itself.
Doing this allocation or allocations can affect the memory map by more
than one record.

[ mfleming - changelog, code style ]
Signed-off-by: NZach Bobroff <zacharyb@ami.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

This patch reworks the UEFI anti-bricking code, including an effective
reversion of cc5a080c and 31ff2f20. It turns out that calling
QueryVariableInfo() from boot services results in some firmware
implementations jumping to physical addresses even after entering virtual
mode, so until we have 1:1 mappings for UEFI runtime space this isn't
going to work so well.

Reverting these gets us back to the situation where we'd refuse to create
variables on some systems because they classify deleted variables as "used"
until the firmware triggers a garbage collection run, which they won't do
until they reach a lower threshold. This results in it being impossible to
install a bootloader, which is unhelpful.

Feedback from Samsung indicates that the firmware doesn't need more than
5KB of storage space for its own purposes, so that seems like a reasonable
threshold. However, there's still no guarantee that a platform will attempt
garbage collection merely because it drops below this threshold. It seems
that this is often only triggered if an attempt to write generates a
genuine EFI_OUT_OF_RESOURCES error. We can force that by attempting to
create a variable larger than the remaining space. This should fail, but if
it somehow succeeds we can then immediately delete it.

I've tested this on the UEFI machines I have available, but I don't have
a Samsung and so can't verify that it avoids the bricking problem.
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: Lee, Chun-Y <jlee@suse.com> [ dummy variable cleanup ]
Cc: <stable@vger.kernel.org>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

We need to check the runtime sys_table for the EFI version the firmware
specifies instead of just checking for a NULL QueryVariableInfo.  Older
implementations of EFI don't have QueryVariableInfo but the runtime is
a smaller structure, so the pointer to it may be pointing off into garbage.

This is apparently the case with several Apple firmwares that support EFI
1.10, and the current check causes them to no longer boot.  Fix based on
a suggestion from Matthew Garrett.
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Fix this:

arch/x86/boot/compressed/eboot.c: In function ‘setup_efi_vars’:
arch/x86/boot/compressed/eboot.c:269:2: warning: passing argument 1 of ‘efi_call_phys’ makes pointer from integer without a cast [enabled by default]
In file included from arch/x86/boot/compressed/eboot.c:12:0:
/w/kernel/linux/arch/x86/include/asm/efi.h:8:33: note: expected ‘void *’ but argument is of type ‘long unsigned int’

after cc5a080c ("efi: Pass boot services variable info to runtime
code").
Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: Matthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

EFI variables can be flagged as being accessible only within boot services.
This makes it awkward for us to figure out how much space they use at
runtime. In theory we could figure this out by simply comparing the results
from QueryVariableInfo() to the space used by all of our variables, but
that fails if the platform doesn't garbage collect on every boot. Thankfully,
calling QueryVariableInfo() while still inside boot services gives a more
reliable answer. This patch passes that information from the EFI boot stub
up to the efi platform code.
Signed-off-by: NMatthew Garrett <matthew.garrett@nebula.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

When initrd file didn't put at the same place with stub kernel, we
need give the file path of initrd, but need use backslash to separate
directory and file. It's not friendly to unix/linux user, and not so
intuitive for bootloader forward paramters to efi stub kernel by
chainloading.

This patch add support to handle_ramdisks for allow slash in file path
of initrd, it convert slash to backlash when parsing path.

In additional, this patch also separates print code of efi_char16_t from
efi_printk, and print out the path/filename of initrd when failed to open
initrd file. It's good for debug and discover typo.

Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: NLee, Chun-Yi <jlee@suse.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

It looks like the original commit that copied the rom contents from
efi always copied the rom, and the fixup in setup_efi_pci from commit
886d751a ("x86, efi: correct precedence of operators in
setup_efi_pci") broke that.

This resulted in macbook pro's no longer finding the rom images, and
thus not being able to use the radeon card any more.

The solution is to just remove the check for now, and always copy the
rom if available.
Reported-by: NVitaly Budovski <vbudovski+news@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Cc: Seth Forshee <seth.forshee@canonical.com>
Acked-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Sasha Levin <sasha.levin@oracle.com>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

The 'Attributes' argument to pci->Attributes() function is 64-bit. So
when invoking in 32-bit mode it takes two registers, not just one.

This fixes memory corruption when booting via the 32-bit EFI boot stub.
Signed-off-by: NDavid Woodhouse <David.Woodhouse@intel.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/1358513837.2397.247.camel@shinybook.infradead.orgSigned-off-by: NH. Peter Anvin <hpa@linux.intel.com>
Cc: Matt Fleming <matt.fleming@intel.com>