- 21 3月, 2013 24 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Currently, every time a message is sent or received, the endiannes need to be fixed on big endian machines. This is currently done on every call to the send API, and on every msg reception logic. Instead of doing that, move it to the send/receive functions. That simplifies the logic and avoids the risk of forgetting to fix it somewhere. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Newer firmwares seem to require an init device message. Apply such change from Doron Cohen's patch: http://patchwork.linuxtv.org/patch/7889/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Backported from Doron Cohen's patch: http://patchwork.linuxtv.org/patch/7889/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
This patch is based on Doron Cohen's patches: http://patchwork.linuxtv.org/patch/7881/ http://patchwork.linuxtv.org/patch/7888/ http://patchwork.linuxtv.org/patch/7883/ It basically merges the above patches, rebasing them to the macro definitions used upstream, with are different than the ones used by them internally. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The old statistics request don't work with newer firmwares. Add a logic to use the newer stats if firmware major is 8. Note that I have only 2 devices here, one with firmware 2.1 (Hauppauge model 55009 Rev B1F7) and another one with firmware 8.1. We may need to adjust the firmware minimal version for the *_EX message variants, as we start finding firmware versions between 2.x and 8.x. This patch was based on Doron Cohen patch: http://patchwork.linuxtv.org/patch/7886/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The very same code also exists for DVB-T. Add it for ISDB-T. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Fix the DVBv5 API handling for ISDB-T and add support for 13 segments. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of re-use tune_done also for stats, the better is to use a different completion. Also, it was noticed that sometimes, the driver answers with MSG_SMS_SIGNAL_DETECTED_IND for status request. Fix the code to also handle those other signal indicators. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Based on Doron Cohen's patch: http://patchwork.linuxtv.org/patch/7887/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Some cleanups at smscoreapi. Most are just CodingStyle. Also, use kzalloc when allocating a new buffer, as it initializes the allocated space with zero. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Without smsdvb, the driver actually does nothing, as it lacks the userspace API. While I wrote it independently, in order to make a sms2270 board I have here to work, this patch is functionally identical to this patch from Doron Cohen: http://patchwork.linuxtv.org/patch/7894/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of displaying this: [ 61.869415] smscore_load_firmware_family2: rc=0, postload=0x (null) Display, instead: [ 1348.441160] smscore_load_firmware_family2: rc=0 Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Don't keep in the dark: report the firmware file name after lookup. That helps to debug what's happening when a firmware is not found. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
There are new firmwares for sms2xxx devices. Change the firmware load logic to handle those newer firmwares and devices. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
As there are some changes that seem to be firmware-dependent, we need to store the firmware version, as we don't want to break support for existing cards that use a legacy (and sometimes custom) firmware. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of using hardcoded descriptors, detect them from the USB descriptors. This patch is rebased form Doron Cohen's patch: http://patchwork.linuxtv.org/patch/7883/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Those attributes will be used by the newer sms2xxx cards. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Board #0 is an existing one. Instead of initializing the driver with it, use a different value to detect if board is unknown. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Add the remaining new defines/enums from Doron Cohen's patch: http://patchwork.linuxtv.org/patch/7882/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Instead of printing a message for some random messages, print it for all sent/received ones. That helps a lot to debug what's going on. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Convert from #define into an enum and add the newer message macros as found on this patch from Doron Cohen: http://patchwork.linuxtv.org/patch/7882/ No messages got supressed. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
The same GPIO config struct was declared twice at the driver, with different names and different macros: struct smscore_config_gpio struct smscore_config_gpio Remove the one that uses CamelCase and fix the references to its attributes/macros. No functional changes. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Those new definitions came from this patch, from Doron Cohen: http://patchwork.linuxtv.org/patch/7882/Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
Siano changed the namespace on more recent API, and re-used some of the old names. In order to be able to update the API to support newer chips, the better is to follow this change. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 20 3月, 2013 16 次提交
-
-
由 Lad, Prabhakar 提交于
add a null entry in platform_device_id {}. This patch fixes following error: drivers/media/platform/davinci/vpbe_venc: struct platform_device_id is 24 bytes. The last of 3 is: 0x64 0x6d 0x33 0x35 0x35 0x2c 0x76 0x70 0x62 0x65 0x2d 0x76 0x65 0x6e 0x63 0x00 0x00 0x00 0x00 0x00 0x03 0x00 0x00 0x00 FATAL: drivers/media/platform/davinci/vpbe_venc: struct platform_device_id is not terminated with a NULL entry! make[1]: *** [__modpost] Error 1 Reported-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NLad, Prabhakar <prabhakar.csengg@gmail.com> Tested-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The use of V4L2_IN/OUT_CAP_CUSTOM_TIMINGS is obsolete, use DV_TIMINGS instead. Note that V4L2_IN/OUT_CAP_CUSTOM_TIMINGS is just a #define for V4L2_IN/OUT_CAP_DV_TIMINGS. At some point in the future these CUSTOM_TIMINGS defines might be removed. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NScott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
drivers/media/platform/davinci/dm644x_ccdc.c: In function ‘validate_ccdc_param’: drivers/media/platform/davinci/dm644x_ccdc.c:233:32: warning: comparison between ‘enum ccdc_gama_width’ and ‘enum ccdc_data_size’ [-Wenum-compare] It took a bit of work, see this thread of an earlier attempt to fix this: https://patchwork.kernel.org/patch/1923091/ I've chosen not to follow the suggestions in that thread since gamma_width is really a different property from data_size. What you really want is to know if gamma_width fits inside data_size and for that you need to translate each enum into a maximum bit number so you can safely compare the two. So I put in two static inline translation functions instead, keeping the rest of the code the same (except for fixing the 'gama' typo). Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Since vpfe_capture already provided a g_std op setting current_norm does not actually do anything. Remove it. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Since vpbe_display already provides a g_std op setting current_norm didn't do anything. Remove that code. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
The use of V4L2_OUT_CAP_CUSTOM_TIMINGS is deprecated, use DV_TIMINGS instead. Note that V4L2_OUT_CAP_CUSTOM_TIMINGS is just a #define for V4L2_OUT_CAP_DV_TIMINGS. At some point in the future these CUSTOM_TIMINGS defines might be removed. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Remove VPBE_ENC_DV_PRESET (the DV_PRESET API is no longer supported) and VPBE_ENC_CUSTOM_TIMINGS is renamed to VPBE_ENC_DV_TIMINGS since the old "CUSTOM_TIMINGS" name is deprecated in favor of "DV_TIMINGS". Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Acked-by: NSekhar Nori <nsekhar@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This removes some incorrect dv_preset references left over from copy-and-paste errors. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
Finally remove the dv_preset support from this driver. Note that dv_preset support was already removed from any bridge drivers that use this i2c driver, so the dv_preset ops were no longer called and can be removed safely. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
In the functions tvp7002_mbus_fmt(), tvp7002_log_status and tvp7002_probe() we should use the dv_timings data structures instead of dv_preset data structures and functions. This is the second step towards removing the deprecated preset support of this driver. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Hans Verkuil 提交于
This is the first step towards removing the deprecated preset support of this driver. Signed-off-by: NHans Verkuil <hans.verkuil@cisco.com> Acked-by: NLad, Prabhakar <prabhakar.lad@ti.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Andrey Pavlenko 提交于
Added support for the GOTVIEW SatelliteHD card which is based on Montage M88DS3000 and works very well with this driver. Signed-off-by: NAndrey Pavlenko <andrey.a.pavlenko@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
The name is already misleading and will be more so in the future as the connection to the input subsystem is obscured away further. Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 David Härdeman 提交于
rc-core is a subsystem so it should be registered earlier if built into the kernel. Signed-off-by: NDavid Härdeman <david@hardeman.nu> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-