- 22 2月, 2006 1 次提交
-
-
由 Andy Fleming 提交于
Add PCI support for setting PCI from flat device tree on 85xx specifically for MPC8540 ADS. Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
- 10 2月, 2006 26 次提交
-
-
由 Geoff Levand 提交于
With this patch 'make vmlinux.bin' works. This is needed by some embedded platforms. Kumar already added the routines to actually build the image in arch/powerpc/boot/Makefile. Signed-off-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Jon Mason 提交于
This patch removes all self references and fixes references to files in the now defunct arch/ppc64 tree. I think this accomplises everything wanted, though there might be a few references I missed. Signed-off-by: NJon Mason <jdmason@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Vitaly Bordug 提交于
Implemented by modification of the .name field of the platform device, when PDs with the same names are to be used within different drivers, as <device_name> -> <device_name>:<function> Corresponding drivers should change the .name in struct device_driver to reflect upper of course. Added ppc_sys_device_disable/enable function set, making it easier to disable all the inexistent/not utilized platform device way pdevs. By the check of the "disabled" bit in the config field of ppc_sys_specs, disabled platform devices will be either added/removed from the bus, or simply not registered on it, depending on the time when disable/enable call asserted. The default behaviour when nothing is disabled/enabled will be "all devices are enabled", which is the same as before. Also helper platform_notify_map function added, making assignment of board-specific platform_info more consistent and generic. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Signed-off-by: NMarcelo Tosatti <marcelo.tosatti@cyclades.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Currently we have some stuff in firmware.h and kernel/firmware.c that is #ifdef CONFIG_PPC_PSERIES. Move it all into platforms/pseries. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Clean up fw_feature_init in platforms/pseries/setup.c. Clean up white space and replace the while loop with a for loop - which seems clearer to me. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
The e500 core reference manual indicates that isync is required after mtmsr(DE bit) and mtspr DBCR0. Add isyncs to make the code conform to the spec. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
Ran arch/powerpc/platforms/85xx through Lindent Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
Rename mpc85xx.c to misc.c to match the pattern established by the 8349 port - consistency is a good thing. Also run Lindent on the file to clean it up. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
Cut-and-paste from the old platform code in arch/ppc resulted in arch/powerpc/platforms/85xx/mpc85xx_ads.c having way too many header files included. Clean this up. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Becky Bruce 提交于
Updated FP unavailable exception to refer to the correct function in traps.c. head_booke.h was using the old name, KernelFP, instead of kernel_fp_unavailable_exception. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
-
由 Becky Bruce 提交于
Updated the documentation to include the definition of the USB device node format for Freescale SOC devices. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 JANAK DESAI 提交于
Registers system call for the powerpc architecture. Signed-off-by: NJanak Desai <janak@us.ibm.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@muc.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
With this, new system calls only have to be wired up in one place for ARCH=ppc and ARCH=powerpc, rather than 2. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Oleg Nesterov 提交于
Clear unblockable signals beforehand. Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Oleg Nesterov 提交于
Pointed out by Linus Torvalds. sys_signal() forgets to initialize ->sa_mask. ( I suspect arch/ia64/ia32/ia32_signal.c:sys32_signal() also needs this fix ) Signed-off-by: NOleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Heiko Carstens 提交于
The sparc64 64 bit syscall table seems to be broken as it has compat_sys_newfstatat in its syscall table instead of sys_newfstatat. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tony Luck 提交于
-
由 Hidetoshi Seto 提交于
MCA driver can cause panic if kernel gets a state info with no minstate. This patch adds minstate validation before handling it. Signed-off-by: NHidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Tony Luck 提交于
Pointed out by Oleg Nesterov <oleg@tv-sign.ru>, who in turn got the hint from Linus. Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Prarit Bhargava 提交于
Patch was suggested by Kenneth W. Chen here Signed-off-by: NPrarit Bhargava <prarit@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Prarit Bhargava 提交于
Remove an erroneous kfree, and unlink the pcidev_info struct from the pcidev_info list prior to free'ing the pcidev_info struct. Signed-off-by: NPrarit Bhargava <prarit@sgi.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
This reverts commit 5e375bc7. Kyle McMartin steps on his soap-box: "Sigh. Can everyone please stop assuming gcc can output to /dev/null? On several platforms, ld tries to lseek in the output file, and fails if it can't." Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 09 2月, 2006 13 次提交
-
-
由 Jeff Garzik 提交于
-
由 Jeff Garzik 提交于
-
由 Kristian Slavov 提交于
If you set network interface down and up again, the IPv6 address autoconfiguration does not work. 'ip addr' shows that the link-local address is in tentative state. We don't even react to periodical router advertisements. During NETDEV_DOWN we clear IF_READY, and we don't set it back in NETDEV_UP. While starting to perform DAD on the link-local address, we notice that the device is not in IF_READY, and we abort autoconfiguration process (which would eventually send router solicitations). Acked-by: NJuha-Matti Tapio <jmtapio@verkkotelakka.net> Acked-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andi Kleen 提交于
Add unshare syscall for x86-64 ppoll/pselect are not ready yet, but add reservations. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Janak Desai 提交于
Registers system call for the ia64 architecture. Reserves space for ppoll and pselect, and adds unshare at system call number 1296. Signed-off-by: NJanak Desai <janak@us.ibm.com> Signed-off-by: NTony Luck <tony.luck@intel.com>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
Manual conflict merge of arch/arm/Kconfig
-
由 Jordan Crouse 提交于
An obvious vi fat finger on my part. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Patch from Tony Lindgren This patch fixes the low-level IO init for omap2 boards. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Patch from Tony Lindgren This patch fixes the low-level IO init for omap1 boards. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Tony Lindgren 提交于
Patch from Tony Lindgren This patch adds the missing cache flushes to common low-level init that are needed to access the IO region. These flushes are normally done at the end of devicemaps_init(), but we need to detect the OMAP core type early. Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-