- 31 8月, 2017 1 次提交
-
-
由 Paolo Valente 提交于
To provide a very smooth service, bfq starts to serve a bfq_queue only if the queue is 'eligible', i.e., if the same queue would have started to be served in the ideal, perfectly fair system that bfq simulates internally. This is obtained by associating each queue with a virtual start time, and by computing a special system virtual time quantity: a queue is eligible only if the system virtual time has reached the virtual start time of the queue. Finally, bfq guarantees that, when a new queue must be set in service, there is always at least one eligible entity for each active parent entity in the scheduler. To provide this guarantee, the function __bfq_lookup_next_entity pushes up, for each parent entity on which it is invoked, the system virtual time to the minimum among the virtual start times of the entities in the active tree for the parent entity (more precisely, the push up occurs if the system virtual time happens to be lower than all such virtual start times). There is however a circumstance in which __bfq_lookup_next_entity cannot push up the system virtual time for a parent entity, even if the system virtual time is lower than the virtual start times of all the child entities in the active tree. It happens if one of the child entities is in service. In fact, in such a case, there is already an eligible entity, the in-service one, even if it may not be not present in the active tree (because in-service entities may be removed from the active tree). Unfortunately, in the last re-design of the hierarchical-scheduling engine, the reset of the pointer to the in-service entity for a given parent entity--reset to be done as a consequence of the expiration of the in-service entity--always happens after the function __bfq_lookup_next_entity has been invoked. This causes the function to think that there is still an entity in service for the parent entity, and then that the system virtual time cannot be pushed up, even if actually such a no-more-in-service entity has already been properly reinserted into the active tree (or in some other tree if no more active). Yet, the system virtual time *had* to be pushed up, to be ready to correctly choose the next queue to serve. Because of the lack of this push up, bfq may wrongly set in service a queue that had been speculatively pre-computed as the possible next-in-service queue, but that would no more be the one to serve after the expiration and the reinsertion into the active trees of the previously in-service entities. This commit addresses this issue by making __bfq_lookup_next_entity properly push up the system virtual time if an expiration is occurring. Signed-off-by: NPaolo Valente <paolo.valente@linaro.org> Tested-by: NLee Tibbert <lee.tibbert@gmail.com> Tested-by: NOleksandr Natalenko <oleksandr@natalenko.name> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
- 29 8月, 2017 39 次提交
-
-
git://git.infradead.org/nvme由 Jens Axboe 提交于
Pull NVMe changes from Christoph: "Below is the current set of NVMe updates for Linux 4.14, now against your postmerge branch, and with three more patches. The biggest bit comes from Sagi and refactors the RDMA driver to prepare for more code sharing in the setup and teardown path. But we have various features and bug fixes from a lot of people as well."
-
由 Christoph Hellwig 提交于
Instead validate that these identifiers do not change, as that is prohibited by the specification. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com>
-
由 Christoph Hellwig 提交于
The function is used in two places, and the shared code for those will diverge later in this series. Instead factor out a new helper to get the ids for a namespace, simplify the calling conventions for nvme_identify_ns and just open code the sequence. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
-
由 Christoph Hellwig 提交于
And move the flags for the flags field near that field while touching this area. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me>
-
由 Martin K. Petersen 提交于
If an NVMe controller reports RTD3 Entry Latency larger than shutdown_timeout, up to a maximum of 60 seconds, use that value to set the shutdown timer. Otherwise fall back to the module parameter which defaults to 5 seconds. Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> [hch: removed do_div, made transition time local scope] Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Jan H. Schönherr 提交于
The value of iod->first_dma ends up as prp2 in NVMe commands. In case there is not enough data to cross a page boundary, iod->first_dma is never initialized and contains random data. Comply with the NVMe specification and fill in 0 in that case. Signed-off-by: NJan H. Schönherr <jschoenh@amazon.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Max Gurtovoy 提交于
This patch slightly improves performance (mainly for small block sizes). Signed-off-by: NMax Gurtovoy <maxg@mellanox.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Martin Wilck 提交于
This changes the earlier patch "nvmet: don't report 0-bytes in serial number" to use the memcpy_and_pad() helper introduced in a previous patch. Signed-off-by: NMartin Wilck <mwilck@suse.com> Reviewed-by: NSagi Grimberg <sagi@grimbeg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Martin Wilck 提交于
This helper function is useful for the nvme subsystem, and maybe others. Note: the warnings reported by the kbuild test robot for this patch are actually generated by the use of CONFIG_PROFILE_ALL_BRANCHES together with __FORTIFY_INLINE. Signed-off-by: NMartin Wilck <mwilck@suse.com> Reviewed-by: NSagi Grimberg <sagi@grimbeg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 James Smart 提交于
The existing nvmet_fc sg list handling has 2 faults: a) the request between LLDD and transport has too large of an sg list (256 elements), which is normally 256k (64 elements). b) sglist handling doesn't optimize on the fact that each element is a page. This patch removes the static sg list in the request and uses the dynamic list already present in the nvmet_fc transport. It also simplies the handling of the sg list on multiple sequences to take advantage of the per-page divisions. Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 James Smart 提交于
If the LLDD resets or detaches from an fc port, the LLDD will deregister all remoteports seen by the fc port and deregister the localport associated with the fc port. The teardown of the localport structure will be held off due to reference counting until all the remoteports are removed (and they are held off until all controllers/associations to terminated). Currently, if the fc port is reinit/reattached and registered again as a localport it is treated as an independent entity from the prior localport and all prior remoteports and controllers cannot be revived. They are created as new and separate entities. This patch changes the localport registration to look at the known localports that are waiting to be torndown. If they are the same port based on wwn's, the local port is transitioned out of the teardown state. This allows the remote ports and controller connections to be reestablished and resumed as long as the localport can also be reregistered within the timeout windows. The patch adds a new routine nvme_fc_attach_to_unreg_lport() with the functionality and moves the lport get/put routines to avoid forward references. Signed-off-by: NJames Smart <james.smart@broadcom.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Max Gurtovoy 提交于
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Max Gurtovoy 提交于
Signed-off-by: NMax Gurtovoy <maxg@mellanox.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
Use ctrl->device and lose the func name. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Guan Junxiong 提交于
This helps users to quickly spot the reason of why connection fails if the hostid is not compliant with the uuid format. Signed-off-by: NGuan Junxiong <guanjunxiong@huawei.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
To make the nvme_rdma_configure_admin_queue generic in preparation of moving it to common code. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
No need to queue an extra work to indirect controller removal, just call the ctrl remove routine. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
This should pair with nvme_rdma_stop_queue. While this is not a complete inverse, it still pairs up pretty well because in fabrics we don't have a disconnect capsule (yet) but we simply teardown the transport association. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
Give it a name symmetric to nvme_rdma_free_queue. Also pass in the ctrl sqsize+1 and not the opts queue_size. And suppress a superflous failure message. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
If we move the queues from LIVE state, we might as well stop them (drain for rdma). Do it after we stop the request queues to prevent a stray request sneaking in .queue_rq after we stop the queue. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
Make a symmetrical handling with admin queue. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
No need to open-code it. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
We're not supposed to do that. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
Mimic the pci driver as a controller disable might be more lightweight than a shutdown. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
We always pair tagset allocation with rdma device reference and it shares some code, centralize it with an argument if its an admin or IO tagset. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
Will be used when we centralize control flows. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Sagi Grimberg 提交于
We will call it from other places so avoid having to forward declare it. Also move it next to nvme_rdma_destroy_admin_queue. Signed-off-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Johannes Thumshirn 提交于
NVME_RDMA_MAX_SEGMENT_SIZE is not used anywhere, zap it. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Reviewed-by: NMax Gurtovoy <maxg@mellanox.com> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Johannes Thumshirn 提交于
ALL_OPTS isn't used anywhere, remove it. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Guan Junxiong 提交于
nvmf target shall return NVME_SC_CONNECT_INVALID_HOST instead of the gereal code INVALID_PARAM when the given host nqn is not allowed to connect. Refer to the 2.2.1 section of the NVMe over Fabrics Spec. Signed-off-by: NGuan Junxiong <guanjunxiong@huawei.com> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NMax Gurtovoy <maxg@mellanox.com>
-
由 Jon Derrick 提交于
NVME's Timestamp feature allows controllers to be aware of the epoch time in milliseconds. This patch adds the set features hook for various transports through the identify path, so that resets and resumes can update the controller as necessary. Signed-off-by: NJon Derrick <jonathan.derrick@intel.com> [hch: rebased on top of nvme-4.13 error handling changes, changed nvme_configure_timestamp to return the status] Signed-off-by: NChristoph Hellwig <hch@lst.de>
-
由 Arnav Dawn 提交于
Define the constant "0xffffffff" (used as nsid for all namespaces) as NVME_NSID_ALL. Signed-off-by: NArnav Dawn <a.dawn@samsung.com> Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
-
由 Arnav Dawn 提交于
This patch adds support for handling Fw activation without reset On completion of FW-activation-starting AER, all queues are paused till CSTS.PP is cleared or timed out (exceeds max time for fw activtion MTFA). If device fails to clear CSTS.PP within MTFA, driver issues reset controller. Signed-off-by: NArnav Dawn <a.dawn@samsung.com> Reviewed-by: NKeith Busch <keith.busch@intel.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NSagi Grimberg <sagi@grimberg.me>
-
由 Jens Axboe 提交于
Linux 4.13-rc7 Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 David Jeffery 提交于
There is a race between changing I/O elevator and request_queue removal which can trigger the warning in kobject_add_internal. A program can use sysfs to request a change of elevator at the same time another task is unregistering the request_queue the elevator would be attached to. The elevator's kobject will then attempt to be connected to the request_queue in the object tree when the request_queue has just been removed from sysfs. This triggers the warning in kobject_add_internal as the request_queue no longer has a sysfs directory: kobject_add_internal failed for iosched (error: -2 parent: queue) ------------[ cut here ]------------ WARNING: CPU: 3 PID: 14075 at lib/kobject.c:244 kobject_add_internal+0x103/0x2d0 To fix this warning, we can check the QUEUE_FLAG_REGISTERED flag when changing the elevator and use the request_queue's sysfs_lock to serialize between clearing the flag and the elevator testing the flag. Signed-off-by: NDavid Jeffery <djeffery@redhat.com> Tested-by: NMing Lei <ming.lei@redhat.com> Reviewed-by: NMing Lei <ming.lei@redhat.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-
由 weiping zhang 提交于
The last parameter "count" never be used in xxx_var_store, convert these functions to void. Signed-off-by: Nweiping zhang <zhangweiping@didichuxing.com> Signed-off-by: NJens Axboe <axboe@kernel.dk>
-