[why]
A debug option is needed to temporarily force dp2 new link training
fallback method for debugging purpose.
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Need to have dpia debug bits for configuring hpd delay.

[How]
Added hpd_delay_in_ms variable in dpia_debug_options.
Reviewed-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: NPavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Nmeenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following:
- FW promotion to 0.0.95
- DSC fixes for supported Docks
- Fixes eDP display issue
- Vendor LTTR workarounds
- Fixes Tiled display audio issue
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NBhawanpreet.Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Allow changing DET size with debug flag for testing purposes
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Certain LTTPR require special workarounds in order to comply
with DP specifications.

[How]
Implement vendor specific sequences via DPCD writes to
vendor-specific LTTPR registers.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Certain USB4 docks do not seem to be able to handle disabling
DSC once it has been enabled on an MST stream. This can result
in blank displays.

[How]
As a work around, always enable DSC on docks exhibiting this issue. The
flag to indicate the use of DSC for MST streams on a USB4 dock is set
during detection of the dock and only cleared when the USB4 dock is
disconnected.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
During otg sync trigger, plane states are used to decide whether the otg
is already synchronized or not. There are scenarions when otgs are
disabled without plane state getting disabled and in such case the otg is
excluded from synchronization.

[How]
Introduced pipe_idx_syncd in pipe_ctx that tracks each otgs master pipe.
When a otg is disabled/enabled, pipe_idx_syncd is reset to itself.
On sync trigger, pipe_idx_syncd is checked to decide whether a otg is
already synchronized and the otg is further included or excluded from
synchronization.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NMustapha Ghaddar <mustapha.ghaddar@amd.com>
Acked-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Nmeenakshikumar somasundaram <meenakshikumar.somasundaram@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Change since v1: add brief description
1. Add hdmi frl pcon support to existing asic family.
2. Determine pcon frl capability based on pcon dpcd.
3. pcon frl is taken into consideration into mode validation.

v2: squash in warning fix (Alex)
Signed-off-by: NFangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following:
- FW promotion to 0.0.94
- Enable seamless boot for DCN301
- Improvements in bandwidth validation
- Fixes in flags update, link encoder assignments, DSC, ODM combine and more
Acked-by: NQingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- Fix issue that secondary display goes blank on Non DCN31.
- Adjust flushing data in DMCUB
- Revert patches which cause regression in hadnling MPO/Link encoder assignment
- Correct the setting within MSA of DP2.0
- Adjustment for DML isolation
- Fix FIFO erro in fast boot sequence
- Enable DSC over eDP
- Adjust the DSC power off sequence
Reviewed-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[What]
This change allows adjustment to the Visual Confirm
height border.

[Why]
Aids debugging and testing

[How]
Use the existing infrastructure to implement logic to
draw borders
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NHarry VanZyllDeJong <hvanzyll@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
- Adding a DM interface to enable DSC over eDP on Linux
- DSC over eDP will allow to power savings by reducing
the bandwidth required to support panel's modes
- Apply link optimization algorithm to reduce link bandwidth
when DSC is enabled

[how]
- Read eDP panel's DSC capabilities
- Apply DSC policy on eDP panel based on its DSC capabilities
- Enable DSC encoder's on the pipe
- Enable DSC on panel's side by setting DSC_ENABLE DPCD register
- Adding link optimization algorithm to reduce link rate or lane
count based
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NWayne Lin <wayne.lin@amd.com>
Signed-off-by: NMikita Lipski <mikita.lipski@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- Improvements to INBOX0 HW Lock
- Add support for sending TPS3 pattern
- Fix Coverity Issues
- Fixes for DMUB
- Fix RGB MPO underflow with multiple displays
- WS fixes and code restructure
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
HPO is only used for DP2.0. HPO HW control should be
disable when not being used to save power.

[How]
Shutdown HPO HW control during init hw.
Shutdown HPO HW control during stream disable.
Enable HPO HW control during stream enable if DP2.0.
Acked-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
- DPIA MST slot registers are not programmed during payload
allocation and hence MST does not work with DPIA.
- HPD RX interrupts are not handled for DPIA.

[How]
- Added inbox command to program the MST slots whenever
  payload allocation happens for DPIA links.
- Added support for handling HPD RX interrupts
Signed-off-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This new DC version brings improvements in the following areas:
- Improvements for USB4;
- Isolate FPU code for DCN20, DCN301, and DSC;
- Fixes on Linking training;
- Refactoring some parts of the code, such as PSR;
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This change adds a config flag to allow non fullscreen MPO during ODM.
Scaling calculation will still fail configurations where video is only
one one side of the screen.
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We found a compilation error that we thought was caused by the 3DLUT
patch; later on, we figured out the root cause of the problem, but we
already applied the revert in the wrong patch. This commit brings it
back  the 3DLUT fix.
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Created new fields that matches new B0 structs On DCN31 the mapping of
DIO output to PHY differs from A0 to B0 boards with new PHY C20 & this
new mapping needed to be handled.

[How]
Mapped new structure based on new structs Added logic for mapping over
A0 and B0 boards Hooked all new structs together.
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAhmad Othman <Ahmad.Othman@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To expose new power optimization flags to PSR interface. It allows the
PSR related power features can be enabled separately base on different
use scenarios.
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAgustin Gutierrez <agustin.gutierrez@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NRobin Chen <po-tchen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This DC patchset brings improvements in multiple areas. In summary, we
highlight:

* Fix some issues such as DP2 problem, prefetch bandwidth calculation
for DCN3.1 and others.
* Increased Z9 latency and removed z10 save after dsc disable.
* Revert a couple of bad changes.
* Added missing PSR state patch.
Acked-by: NAgustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Some DP2.0 RX requires us to set MST_EN even for SST configuration.
We added this debug option so we can configure this temporary workaround
for the RX.
Reviewed-by: NGeorge Shen <george.shen@amd.com>
Acked-by: NAgustin Gutierrez Sanchez <agustin.gutierrez@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Additional debug flags that can be useful for testing USB4 DP
link training.

Add flags:
- 0x2 : Forces USB4 DP link to non-LTTPR mode
- 0x4 : Extends status read intervals to about 60s.
Reviewed-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
To add support for dpia debug options.
Reviewed-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Acked-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We requires information from DPCD in order to identify USB4 DP
tunneling targets.

[How]
Add USB4 DP tunneling fields to DPCD struct and populate these fields
during sink detection.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NJimmy Kizito <Jimmy.Kizito@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To process SET_CONFIG transactions with DMUB using inbox1 and
outbox1 mail boxes.

[How]
1) Added inbox1 DPIA command subtype DMUB_CMD__DPIA_SET_CONFIG_ACCESS to
   issue SET_CONFIG command to DMUB in dc_process_dmub_set_config_async().
   DMUB processes the command with DPIA sends reply back immediately or
   in an outbox1 message triggering an outbox1 interrupt to driver.
2) DMUB posts SET_CONFIG reply as an Outbox1 message of type
   DMUB_OUT_CMD__SET_CONFIG_REPLY.
3) The dmub async to sync mechanism for AUX is modified to accommodate
   SET_CONFIG commands for both command issue and reply code paths.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
To add support for HPD & HPD RX interrupt handling for USB4 DPIA in
YELLOW_CARP_B0. USB4 DPIA HPD & HPD RX interrupts are issued from DMUB to
driver as a outbox1 message.

[HOW]
1) Created get_link_index_from_dpia_port_index() to retrieve link index
   from dpia port index for HPD & HPD RX dmub notifications.
2) Added DMUB HPD & HPD RX handling in dmub_srv_stat_get_notification().
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NWayne Lin <Wayne.Lin@amd.com>
Acked-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMeenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- New firmware version
- Fix DMUB problems on stress test.
- Improve link training by skip overrride for preferred link
- Refinement of FPU code structure for DCN2
- Fix 3DLUT skipped programming
- Fix detection of 4 lane for DPALT
- Fix dcn3 failure due to dmcbu_abm not created
- Limit display scaling to up to 4k for DCN 3.1
- Add helper for blanking all dp displays
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Added root clock optimization debug flags for future debugging.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NSolomon Chiu <solomon.chiu@amd.com>
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixes:
- Fixes to backlight, LUT, PPS, MST
- Use correct vpg for 128b/132b encoding
- Improved logging for VCP
- Replace referral of dal with dc
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Requested feature to assist with Thermal, Acoustic, Power, and
Performance tuning.

[How]
Add a debug field that will override calculated minimum DRAM clock,
if the debug value is larger than the calculate value.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To prevent unnecessary wake up of DMCUB when ABM is enabled without PSR
enabled, driver will notify DMCUB to stop ABM's vertical interrupts
if vsync is disabled and steady state is reached.

[How]
Send inbox message to notify ABM pause based on vsync on/off
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This new DC version brings improvements in the following areas:
- New firmware version
- Fix HPD problems on DCN2
- Fix generic encoder problems and null deferences
- Adjust DCN301 watermark
- Rework dynamic bpp for DCN3x
- Improve link training fallback logic
Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NIan Chen <ian.chen@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Power down VPG and AFMT blocks when not in use

[HOW]
Create afmt31 and vpg31 structs and add necessary fields to reg list
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NMichael Strauss <michael.strauss@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

* Correct degamma coefficients
* Optimize bandwidth on following fast update
* Fix multiple memory leaks reported by coverity
* Get backlight from PWM if DMCU is not initialized
Acked-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When system is in Z10 HPD interrupts cannot fire, we may miss display
configuration changes.

[How]
When Zstate is enabled, if DMUB indicate DCN has lost power, do a
complete detection periodically.
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NMikita Lipski <mikita.lipski@amd.com>
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>