- 10 2月, 2009 5 次提交
-
-
由 Johannes Berg 提交于
Giving the signal in dB isn't much more useful to userspace than giving the signal in unspecified units. This removes some radiotap information for zd1211 (the only driver using this flag), but it helps a lot for getting cfg80211-based scanning which won't support dB, and zd1211 being dB is a little fishy anyway. Signed-off-by: NJohannes Berg <johannes@sipsolutions.net> Cc: Bruno Randolf <bruno@thinktube.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Harvey Harrison 提交于
The base versions handle constant folding now. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alina Friedrichsen 提交于
I hold back this patch for around a week to avoid confusion. This is the second step of "mac80211: Fixed BSSID handling revisited". With it, in the situation of a strange merge to the same BSSID (e.g. caused by a TSF overflow) only reset_tsf() is called. And sta_info_flush_delayed() is only called if you change the network manually, not on an automatic BSSID merge. Signed-off-by: NAlina Friedrichsen <x-alina@gmx.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Alina Friedrichsen 提交于
This fixes a bug when creating a new IBSS network with a fixed BSSID. The fixed BSSID situation is now with one of my last patches handled in ieee80211_sta_find_ibss() function. It's more robust to test against (ifsta->flags & IEEE80211_STA_PREV_BSSID_SET), because ifsta->state is not seted right in every situation and so the creating of the new IBSS network sometimes hangs after the first try to scan for a network to merge. Signed-off-by: NAlina Friedrichsen <x-alina@gmx.net> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Sujith 提交于
Trying to associate with a non-existent SSID stops the state machine after the first run. Subsequent association requests fail to start the scan engine. Fix this by resetting assoc_scan_tries to zero after completing a scan run. Signed-off-by: NSujith <Sujith.Manoharan@atheros.com> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
- 09 2月, 2009 4 次提交
-
-
由 Herbert Xu 提交于
gro: Optimise TCP packet reception As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch uses bit ops to logical ops, as well as open coding memcmp to exploit alignment properties. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As this function can be called more than half a million times for 10GbE, it's important to optimise it as much as we can. This patch does some obvious changes to use 2-byte and 4-byte operations instead of byte-oriented ones where possible. Bit ops are also used to replace logical ops to reduce branching. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch optimises the Ethernet header comparison to use 2-byte and 4-byte xors instead of memcmp. In order to facilitate this, the actual comparison is now carried out by the callers of the shared dev_gro_receive function. This has a significant impact when receiving 1500B packets through 10GbE. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch prepares for the move of the same_flow checks out of dev_gro_receive. As such we need to remember the number of held packets since doing a loop just to count them every time is silly. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2009 8 次提交
-
-
由 Ilpo Järvinen 提交于
$ diff-funcs xs_udp_write_space net/sunrpc/xprtsock.c net/sunrpc/xprtsock.c xs_tcp_write_space --- net/sunrpc/xprtsock.c:xs_udp_write_space() +++ net/sunrpc/xprtsock.c:xs_tcp_write_space() @@ -1,4 +1,4 @@ - * xs_udp_write_space - callback invoked when socket buffer space + * xs_tcp_write_space - callback invoked when socket buffer space * becomes available * @sk: socket whose state has changed * @@ -7,12 +7,12 @@ * progress, otherwise we'll waste resources thrashing kernel_sendmsg * with a bunch of small requests. */ -static void xs_udp_write_space(struct sock *sk) +static void xs_tcp_write_space(struct sock *sk) { read_lock(&sk->sk_callback_lock); - /* from net/core/sock.c:sock_def_write_space */ - if (sock_writeable(sk)) { + /* from net/core/stream.c:sk_stream_write_space */ + if (sk_stream_wspace(sk) >= sk_stream_min_wspace(sk)) { struct socket *sock; struct rpc_xprt *xprt; $ codiff net/sunrpc/xprtsock.o net/sunrpc/xprtsock.o.new net/sunrpc/xprtsock.c: xs_tcp_write_space | -163 xs_udp_write_space | -163 2 functions changed, 326 bytes removed net/sunrpc/xprtsock.c: xs_write_space | +179 1 function changed, 179 bytes added net/sunrpc/xprtsock.o.new: 3 functions changed, 179 bytes added, 326 bytes removed, diff: -147 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
$ codiff net/ipv6/addrconf.o net/ipv6/addrconf.o.new net/ipv6/addrconf.c: addrconf_notify | -267 1 function changed, 267 bytes removed net/ipv6/addrconf.c: add_addr | +86 1 function changed, 86 bytes added net/ipv6/addrconf.o.new: 2 functions changed, 86 bytes added, 267 bytes removed, diff: -181 Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Acked-by: NRalf Baechle <ralf@linux-mips.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ilpo Järvinen 提交于
Signed-off-by: NIlpo Järvinen <ilpo.jarvinen@helsinki.fi> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Van Hensbergen 提交于
When the changes were done to the protocol last release, some endian bugs crept in. This patch fixes those endian problems and has been verified to run on 32/64 bit and x86/ppc architectures. This version of the patch incorporates the correct annotations for endian variables. Signed-off-by: NEric Van Hensbergen <ericvh@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Based upon a patch from Atsushi Nemoto <anemo@mba.ocn.ne.jp> -------------------- The commit 649274d9 ("net_dma: acquire/release dma channels on ifup/ifdown") added unconditional call of dmaengine_get() to net_dma. The API should be called only if NET_DMA was enabled. -------------------- Signed-off-by: NDavid S. Miller <davem@davemloft.net> Acked-by: NDan Williams <dan.j.williams@intel.com>
-
由 David Howells 提交于
Fix a potential NULL dereference bug during error handling in rxrpc_kernel_begin_call(), whereby rxrpc_put_transport() may be handed a NULL pointer. This was found with a code checker (http://repo.or.cz/w/smatch.git/). Reported-by: NDan Carpenter <error27@gmail.com> Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2009 8 次提交
-
-
由 Jesper Dangaard Brouer 提交于
Like the UDP header fix, pskb_may_pull() can potentially alter the SKB buffer. Thus the saddr and daddr, pointers may point to the old skb->data buffer. I haven't seen corruptions, as its only seen if the old skb->data buffer were reallocated by another user and written into very quickly (or poison'd by SLAB debugging). Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Gautam Kachroo 提交于
neightbl_dump_info and neigh_dump_table can skip entries if the *fill*info functions return an error. This results in an incomplete dump ((invoked by netlink requests for RTM_GETNEIGHTBL or RTM_GETNEIGH) nidx and idx should not be incremented if the current entry was not placed in the output buffer Signed-off-by: NGautam Kachroo <gk@aristanetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Just like PKTINFO, limit the options area to 64K. Based upon report by Eric Sesterhenn and analysis by Roland Dreier. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pablo Neira Ayuso 提交于
Currently, netlink_broadcast() reports errors to the caller if no messages at all were delivered: 1) If, at least, one message has been delivered correctly, returns 0. 2) Otherwise, if no messages at all were delivered due to skb_clone() failure, return -ENOBUFS. 3) Otherwise, if there are no listeners, return -ESRCH. With this patch, the caller knows if the delivery of any of the messages to the listeners have failed: 1) If it fails to deliver any message (for whatever reason), return -ENOBUFS. 2) Otherwise, if all messages were delivered OK, returns 0. 3) Otherwise, if no listeners, return -ESRCH. In the current ctnetlink code and in Netfilter in general, we can add reliable logging and connection tracking event delivery by dropping the packets whose events were not successfully delivered over Netlink. Of course, this option would be settable via /proc as this approach reduces performance (in terms of filtered connections per seconds by a stateful firewall) but providing reliable logging and event delivery (for conntrackd) in return. This patch also changes some clients of netlink_broadcast() that may report ENOBUFS errors via printk. This error handling is not of any help. Instead, the userspace daemons that are listening to those netlink messages should resync themselves with the kernel-side if they hit ENOBUFS. BTW, netlink_broadcast() clients include those that call cn_netlink_send(), nlmsg_multicast() and genlmsg_multicast() since they internally call netlink_broadcast() and return its error value. Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The previous fix ad0f9904 (gro: Fix handling of imprecisely split packets) only fixed the case of frags merging, frag_list merging in the same circumstances were still broken. In particular, the packet headers end up in the data stream. This patch fixes this plus another issue where an imprecisely split packet header may be read incorrectly (this is mostly harmless since it'll simply cause the packet to not match and be rejected for GRO). Thanks to Emil Tantilov and Jeff Kirsher for helping to track this down. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
This reverts commit 64ff3b93. Jeff Chua reports that it breaks rlogin for him. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As the options passed to ip6_append_data may be ephemeral, we need to duplicate it for corking. This patch applies the simplest fix which is to memdup all the relevant bits. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Dangaard Brouer 提交于
The UDP header pointer assignment must happen after calling pskb_may_pull(). As pskb_may_pull() can potentially alter the SKB buffer. This was exposted by running multicast traffic through the NIU driver, as it won't prepull the protocol headers into the linear area on receive. Signed-off-by: NJesper Dangaard Brouer <hawk@comx.dk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2009 2 次提交
-
-
由 Herbert Xu 提交于
The function sock_alloc_send_pskb is completely useless if not exported since most of the code in it won't be used as is. In fact, this code has already been duplicated in the tun driver. Now that we need accounting in the tun driver, we can in fact use this function as is. So this patch marks it for export again. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
As it currently stands, skb destructors are forbidden on the receive path because the protocol end-points will overwrite any existing destructor with their own. This is the reason why we have to call skb_orphan in the loopback driver before we reinject the packet back into the stack, thus creating a period during which loopback traffic isn't charged to any socket. With virtualisation, we have a similar problem in that traffic is reinjected into the stack without being associated with any socket entity, thus providing no natural congestion push-back for those poor folks still stuck with UDP. Now had we been consistent in telling them that UDP simply has no congestion feedback, I could just fob them off. Unfortunately, we appear to have gone to some length in catering for this on the standard UDP path, with skb/socket accounting so that has created a very unhealthy dependency. Alas habits are difficult to break out of, so we may just have to allow skb destructors on the receive path. It turns out that making skb destructors useable on the receive path isn't as easy as it seems. For instance, simply adding skb_orphan to skb_set_owner_r isn't enough. This is because we assume all over the IP stack that skb->sk is an IP socket if present. The new transparent proxy code goes one step further and assumes that skb->sk is the receiving socket if present. Now all of this can be dealt with by adding simple checks such as only treating skb->sk as an IP socket if skb->sk->sk_family matches. However, it turns out that for bridging at least we don't need to do all of this work. This is of interest because most virtualisation setups use bridging so we don't actually go through the IP stack on the host (with the exception of our old nemesis the bridge netfilter, but that's easily taken care of). So this patch simply adds skb_orphan to the point just before we enter the IP stack, but after we've gone through the bridge on the receive path. It also adds an skb_orphan to the one place in netfilter that touches skb->sk/skb->destructor, that is, tproxy. One word of caution, because of the internal code structure, anyone wishing to deploy this must use skb_set_owner_w as opposed to skb_set_owner_r since many functions that create a new skb from an existing one will invoke skb_set_owner_w on the new skb. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 2月, 2009 1 次提交
-
-
由 Randy Dunlap 提交于
Fix sunrpc/rdma build dependencies. Survives 12 build combinations of INET, IPV6, SUNRPC, INFINIBAND, and INFINIBAND_ADDR_TRANS. ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_connect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_destroy_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_route" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_resolve_addr" [net/sunrpc/xprtrdma/xprtrdma.ko] undefined! ERROR: "rdma_accept" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_destroy_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_listen" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_id" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_create_qp" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_bind_addr" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! ERROR: "rdma_disconnect" [net/sunrpc/xprtrdma/svcrdma.ko] undefined! Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 2月, 2009 1 次提交
-
-
由 Eric Dumazet 提交于
Commit 93821778 (udp: Fix rcv socket locking) accidentally removed sk_drops increments for UDP IPV4 sockets. This field can be used to detect incorrect sizing of socket receive buffers. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 2月, 2009 2 次提交
-
-
由 Herbert Xu 提交于
sk_alloc now sets sk_family so this is redundant. In fact it caught my eye because sock_init_data already uses sk_family so this is too late anyway. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
And switch bsockets to atomic_t since it might be changed in parallel. Signed-off-by: NEric Dumazet <dada1@cosmosbay.com> Acked-by: NEvgeniy Polyakov <zbr@ioremap.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 2月, 2009 9 次提交
-
-
由 Sebastiano Di Paola 提交于
packet_lookup_frames() fails to get user frame if current frame header status contains extra flags. This is due to the wrong assumption on the operators precedence during frame status tests. Fixed by forcing the right operators precedence order with explicit brackets. Signed-off-by: NPaolo Abeni <paolo.abeni@gmail.com> Signed-off-by: NSebastiano Di Paola <sebastiano.dipaola@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
From: Stephen Hemminger <shemminger@vyatta.com> Fix regression introduced by a9d8f911 ("inet: Allowing more than 64k connections and heavily optimize bind(0) time.") Based upon initial patches and feedback from Evegniy Polyakov and Eric Dumazet. From Eric Dumazet: -------------------- Also there might be a problem at line 175 if (sk->sk_reuse && sk->sk_state != TCP_LISTEN && --attempts >= 0) { spin_unlock(&head->lock); goto again; If we entered inet_csk_get_port() with a non null snum, we can "goto again" while it was not expected. -------------------- Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The commit 89a1b249edcf9be884e71f92df84d48355c576aa (gro: Avoid copying headers of unmerged packets) only worked for packets which are either completely linear, completely non-linear, or packets which exactly split at the boundary between headers and payload. Anything else would cause bits in the header to go missing if the packet is held by GRO. This may have broken drivers such as ixgbe. This patch fixes the places that assumed or only worked with the above cases. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Patrick McHardy <kaber@trash.net> suggested using a workqueue instead of hrtimers to trigger netif_schedule() when there is a problem with setting exact time of this event: 'The differnce - yeah, it shouldn't make much, mainly wake up the qdisc earlier (but not too early) after "too many events" occured _and_ no further enqueue events wake up the qdisc anyways.' Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Let's get some info on possible config problems. This patch brings back an old warning, but is printed only once now. With feedback from Patrick McHardy <kaber@trash.net> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
Patrick McHardy <kaber@trash.net> suggested: > How about making this flag and the warning message (in a out-of-line > function) globally available? Other qdiscs (f.i. HFSC) can't deal with > inner non-work-conserving qdiscs as well. This patch uses qdisc->flags field of "suspected" child qdisc. Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
This adds another inet device option to enable gratuitous ARP when device is brought up or address change. This is handy for clusters or virtualization. Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harvey Harrison 提交于
Base versions handle constant folding now. Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jarek Poplawski 提交于
The recent fix of data corruption when splicing from sockets uses memory very inefficiently allocating a new page to copy each chunk of linear part of skb. This patch uses the same page until it's full (almost) by caching the page in sk_sndmsg_page field. With changes from David S. Miller <davem@davemloft.net> Signed-off-by: NJarek Poplawski <jarkao2@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-