GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code
and all driver code has been switch to depend on GPIOLIB. It is thus
safe to have GENERIC_GPIO removed.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

GENERIC_GPIO is now equivalent to GPIOLIB and features that depended on
GENERIC_GPIO can now depend on GPIOLIB to allow removal of this option.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

Set the GENERIC_GPIO option to false by default and force the use of
gpiolib instead of making it optional, to prepare for the removal of
GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NSteven Miao <realmz6@gmail.com>

Force use of gpiolib for Coldfire, as a step towards the deprecation of
GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NGreg Ungerer <gerg@uclinux.org>

pnx833x does not seem to use the generic gpio API.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

This is one step towards the removal of the GENERIC_GPIO option.
OpenRISC mandates the use of GPIOLIB, which enables GENERIC_GPIO anyway,
so this patch should be a no-op.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NJonas Bonn <jonas@southpole.se>

This will help removing the GENERIC_GPIO option.

GPIO access is done through gpiolib, which selects GENERIC_GPIO anyway.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

The Xtensa GPIO driver uses gpiolib and cannot compile with only
GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

SH GPIO drivers all use gpiolib and CONFIG_GENERIC_GPIO is only selected
through CONFIG_GPIOLIB, yet some compilation units depended on
CONFIG_GENERIC_GPIO. Make them depend on CONFIG_GPIOLIB instead since it
is more accurate and prepares us for the future removal of
CONFIG_GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NPaul Mundt <lethal@linux-sh.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

ARCH_REQUIRE_GPIOLIB selects GENERIC_GPIO, so there is no need to select
it explicitly.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

GPIO implementation for unicore32 uses gpiolib, which sets GENERIC_GPIO
when selected.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

PUV3_GPIO depends on ARCH_PUV3 which requires GPIOLIB and thus already
selects GENERIC_GPIO
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

The GPIO driver uses gpiolib, thus it should be compiled when
CONFIG_GPIOLIB is defined and not only CONFIG_GENERIC_GPIO
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

GENERIC_GPIO was selected next to ARCH_REQUIRE_GPIOLIB, which itself
selects GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

Require gpiolib instead of just GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

The GPIO driver for txx9 requires gpiolib, so this is more accurate and
let us get rid of one mention of GENERIC_GPIO which is due to disappear.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

The GPIO driver uses gpiolib, thus it should be compiled when
CONFIG_GPIOLIB is defined and not only CONFIG_GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

sparc's asm/module.h got removed in commit
786d35d4 ("Make most arch asm/module.h
files use asm-generic/module.h"). That removed the only two uses of this
Kconfig symbol. So we can remove its entry too.

> >From arch/sparc/Makefile:
>     ifeq ($(CONFIG_SPARC32),y)
>     [...]
>
>     [...]
>     export BITS    := 32
>     [...]
>
>     else
>     [...]
>
>     [...]
>     export BITS   := 64
>     [...]
>
> So $(BITS) is set depending on whether CONFIG_SPARC32 is set or not.
> Using $(BITS) in sparc's Makefiles is not using CONFIG_BITS. That
> doesn't count as usage of "config BITS".
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 2d78d4be ("[PATCH] bitops:
sparc64: use generic bitops") made the default of GENERIC_HWEIGHT depend
on !ULTRA_HAS_POPULATION_COUNT. But since there's no Kconfig symbol with
that name, this always evaluates to true. Delete this dependency.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Kconfig entry for DEBUG_ERRORS is a verbatim copy of the former arm
entry for that symbol. It got removed in v2.6.39 because it wasn't
actually used anywhere. There are still no users of DEBUG_ERRORS so
remove this entry too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
[catalin.marinas@arm.com: removed option from defconfig]
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Config option GENERIC_HARDIRQS_NO_DEPRECATED was removed in commit
78c89825 ("genirq: Remove the now obsolete
config options and select statements"), but the select was accidentally
reintroduced in commit 8c2c3df3 ("arm64:
Build infrastructure").
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Somehow the driver snuck in with these still in it.
Signed-off-by: NBen Collins <ben.c@servergy.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

887cbce0 "arch Kconfig: centralise CONFIG_ARCH_NO_VIRT_TO_BUS"
and  4febd95a "Select VIRT_TO_BUS directly where needed" from
Stephen Rothwell changed globally how CONFIG_VIRT_TO_BUS is
selected, while my own a5d533ee "ARM: disable virt_to_bus/
virt_to_bus almost everywhere" was merged at the same time and
changed which platforms select it on ARM.

The result of this conflict was that we again see CONFIG_VIRT_TO_BUS
on all ARM systems. This patch fixes up the problem and removes
CONFIG_ARCH_NO_VIRT_TO_BUS again on ARM.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>

The expression to compute the padding needed to fill the uc_sigmask field
to 1024 bits actually computes the padding needed for 1080 bits.
Fortunately, due to the 16-byte alignment of the following field
(uc_mcontext) the definition in glibc contains enough bytes of padding
after uc_sigmask so that the overall offsets and size match in both
definitions.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

The __atomic_hash is only defined when SMP is enabled but the
arm64ksyms.c exports it even for the UP case.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Recent clean-up of the compat signal code left an unused 'stack'
variable.
Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>

Commit 1d9d8639 ("perf,x86: fix kernel crash with PEBS/BTS after
suspend/resume") fixed a crash when doing PEBS performance profiling
after resuming, but in using init_debug_store_on_cpu() to restore the
DS_AREA mtrr it also resulted in a new WARN_ON() triggering.

init_debug_store_on_cpu() uses "wrmsr_on_cpu()", which in turn uses CPU
cross-calls to do the MSR update.  Which is not really valid at the
early resume stage, and the warning is quite reasonable.  Now, it all
happens to _work_, for the simple reason that smp_call_function_single()
ends up just doing the call directly on the CPU when the CPU number
matches, but we really should just do the wrmsr() directly instead.

This duplicates the wrmsr() logic, but hopefully we can just remove the
wrmsr_on_cpu() version eventually.
Reported-and-tested-by: NParag Warudkar <parag.lkml@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now we use ESID_BITS of kernel address to build proto vsid. So rename
USER_ESIT_BITS to ESID_BITS
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

This patch change the kernel VSID range so that we limit VSID_BITS to 37.
This enables us to support 64TB with 65 bit VA (37+28). Without this patch
we have boot hangs on platforms that only support 65 bit VA.

With this patch we now have proto vsid generated as below:

We first generate a 37-bit "proto-VSID". Proto-VSIDs are generated
from mmu context id and effective segment id of the address.

For user processes max context id is limited to ((1ul << 19) - 5)
for kernel space, we use the top 4 context ids to map address as below
0x7fffc -  [ 0xc000000000000000 - 0xc0003fffffffffff ]
0x7fffd -  [ 0xd000000000000000 - 0xd0003fffffffffff ]
0x7fffe -  [ 0xe000000000000000 - 0xe0003fffffffffff ]
0x7ffff -  [ 0xf000000000000000 - 0xf0003fffffffffff ]
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: NGeoff Levand <geoff@infradead.org>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

VSID_BITS and VSID_BITS_1T depends on the context bits  and user esid
bits. Make the dependency explicit
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NAneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
CC: <stable@vger.kernel.org> [v3.8]

Our kernel is not much good without BINFMT_ELF and this fixes a build
warning on 64 bit allnoconfig builds:

warning: (COMPAT) selects COMPAT_BINFMT_ELF which has unmet direct dependencies (COMPAT && BINFMT_ELF)
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With some CONFIGS it's possible that in ppc_set_hwdebug, brk.len is
uninitialised before being used.  It has been reported that GCC 4.2 will
produce the following error in this case:

  arch/powerpc/kernel/ptrace.c:1479: warning: 'brk.len' is used uninitialized in this function
  arch/powerpc/kernel/ptrace.c:1381: note: 'brk.len' was declared here

This patch corrects this.
Signed-off-by: NMichael Neuling <mikey@neuling.org>
Reported-by: NPhilippe De Muyter <phdm@macqel.be>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

With recent arm broadcast time clean-up from Mark Rutland, the dummy
broadcast device is always registered with timer subsystem. And since
the rating of the dummy clock event is very high, it may be preferred
over a real clock event.

This is a change in behavior from past and not an intended one. So
reduce the rating of the dummy clock-event so that real clock-event
device is selected when available.
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NMark Rutland <mark.rutland@arm.com>
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This patch fixes a kernel crash when using precise sampling (PEBS)
after a suspend/resume. Turns out the CPU notifier code is not invoked
on CPU0 (BP). Therefore, the DS_AREA (used by PEBS) is not restored properly
by the kernel and keeps it power-on/resume value of 0 causing any PEBS
measurement to crash when running on CPU0.

The workaround is to add a hook in the actual resume code to restore
the DS Area MSR value. It is invoked for all CPUS. So for all but CPU0,
the DS_AREA will be restored twice but this is harmless.
Reported-by: NLinus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The i.MX35 has two bits per clock gate which are decoded as follows:
      0b00 -> clock off
      0b01 -> clock is on in run mode, off in wait/doze
      0b10 -> clock is on in run/wait mode, off in doze
      0b11 -> clock is always on

The reset value for the MAX clock is 0b10.

The MAX clock is needed by the SoC, yet unused in the Kernel, so the
common clock framework will disable it during late init time. It will
only disable clocks though which it detects as being turned on. This
detection is made depending on the lower bit of the gate. If the reset
value has been altered by the bootloader to 0b11 the clock framework
will detect the clock as turned on, yet unused, hence it will turn it
off and the system locks up.

This patch turns the MAX clock on unconditionally making the Kernel
independent of the bootloader.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>

Scorpion processors have always been v7 CPUs. Fix the Kconfig
text to reflect this.
Reported-by: NStepan Moskovchenko <stepanm@codeaurora.org>
Signed-off-by: NStephen Boyd <sboyd@codeaurora.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

arch/arm/mach-mmp/gplugd.c: In function ‘gplugd_init’:
arch/arm/mach-mmp/gplugd.c:188:2: error: implicit declaration of
function ‘platform_device_register’
[-Werror=implicit-function-declaration]
cc1: some warnings being treated as errors
make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1
make: *** [arch/arm/mach-mmp] Error 2

So append platform_device.h to resolve build issue.
Signed-off-by: NHaojian Zhuang <haojian.zhuang@linaro.org>

56bc911a "[media] s5p-fimc: Redefine platform data structure for fimc-is"
changed the bus_type member of struct fimc_source_info treewide, but
got one instance wrong in mach-s5pv210, which was evidently not
even build tested.

This adds the missing change to get s5pv210_defconfig to build again.
Applies on the Mauro's media tree.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Cc: Sylwester Nawrocki <s.nawrocki@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>

The i.MX25 DT machine descriptor calls a non existing imx25_timer_init()
function. This patch adds it to fix compilation.
Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>