[Why]
Currently we use the maximum possible cursor cache size when deciding if we
should attempt to enable MALL, but this prevents us from enabling the
feature for certain key use cases.

[How]
 - consider cursor bpp when calculating if the cursor fits
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

-Uncomment watermark set d
-This populates the wm table so that it can be sent to PMFW
-This watermark table is used when we are in mall stutter
Signed-off-by: NBhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Reviewed-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Starting from vangogh, the ATCL2 and DAGB0 registers relative
to mgcg/ls has changed.

For MGCG:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.

For MGLS:
Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL.
Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers.
Signed-off-by: NAaron Liu <aaron.liu@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Driver should enable the CGPG feature for RLC in safe mode to
prevent any misalignment or conflict in middle of any power
feature entry/exit sequence.
Achieved by setting RLC_PG_CNTL.GFX_POWER_GATING_ENABLE = 0x1,
and RLC_PG_DELAY_3.CGCG_ACTIVE_BEFORE_CGPG to the desired CGPG
hysteresis value in refclk count.
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NJinzhou Su <Jinzhou.Su@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL.
Signed-off-by: NPrike Liang <Prike.Liang@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and
gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh.
Signed-off-by: NJinzhou Su <Jinzhou.Su@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

 1. Remove PP_GFXOFF_MASK and then GFXOFF can be enabled
    by user space.
 2. GFXOFF is still disabled on Vangogh by default.
 3. When GFXOFF feature on Vangogh landed, will enable
    GFXOFF by default.
 4. GFXOFF can be enabled by debugfs interface amdgpu_gfxoff.
Signed-off-by: NJinzhou Su <Jinzhou.Su@amd.com>
Acked-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
dram clock change latencies get updated using ddr4 latency table, but
that update does not happen before validation. This value
should not be the default and should be number received from
df for better mode support.
This may cause a PState hang on high refresh panels with short vblanks
such as on 1080p 360hz or 300hz panels.

[HOW]
Update latency from 23.84 to 11.72.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NJake Wang <haonan.wang2@amd.com>
Reviewed-by: NSung Lee <Sung.Lee@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When no displays are currently enabled, display driver should not
disallow PSTATE switching.

[How]
Allow PSTATE switching if either the active configuration supports it,
or there are no active displays.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Why:
dml20v2_ModeSupportAndSystemConfigurationFull() didn't check against
DesiredBPP, so it doesn't work correctly when DesiredBPP can't be satisfied.

How:
Port the TruncToValidBPP() version from display_mode_vba_21.c to
display_mode_vba_20v2.c.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NBing Guo <bing.guo@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why/How]
Add logging statements to assist in debugging
errors in the BIOS object table.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NGeorge Shen <george.shen@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
FW version check doesn't allow dmu_stg to support cached inbox,
which yields much better performance than region 4.

[How]
Check a range of fw versions, rather than a simple greater than check.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NWyatt Wood <wyatt.wood@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Why:
Function decide_dp_link_settings() loops infinitely when required bandwidth
can't be supported.

How:
Check the required bandwidth against verified_link_cap before trying to
find a link setting for it.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NBing Guo <bing.guo@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
DMCUB encounters a page fault/double exception with driver direct load
because DMCUB is not held in soft reset after releasing secure reset.

The clean shutdown sequence via GPINT is also not executed in this
sequence which leaves hardware behavior in an indeterminate state.

[How]
Move reset earlier in the sequence.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If the BIOS table is invalid or corrupt then get_i2c_info can fail
and we dereference a NULL pointer.

[How]
Check that ddc_pin is not NULL before using it and log an error if it
is because this is unexpected.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We need hardware reset before hardware init for backdoor loading when
we're reusing the framebuffer memory.

[How]
This doesn't run if the hardware isn't already in reset from software
perspective. The reset function has register level checks so just
remove the software one here.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Since Linux 5.9.0, DRM has provided vrr_range debugfs for
all connectors. Reporting Freesync capability to vrr_range
debugfs entry registered in Linux DM no longer works.

[How]
Report min/max vertical frequency to vrr_range debugfs entrry
created by DRM connectors. Remove vrr_range debugfs entry from
Linux DM.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NStylon Wang <stylon.wang@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
These can differ per ASIC or not be present. Don't call the dcn20 ones
directly but rather the ones defined by the ASIC init table.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NEric Yang <eric.yang2@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Previously as MPO + ODM Combine was not supported, finding secondary pipes
for each case was mutually exclusive. Now that both are supported at the same
time, both cases should be taken into account when finding a secondary pipe.

[HOW]
If a secondary pipe cannot be found based on previous bottom pipe,
search for a second pipe using next_odm_pipe instead.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NSung Lee <sung.lee@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
FEC over eDP support is incomplete.

[How]
Disable FEC over eDP.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NMike Hsieh <chun-wei.hsieh@amd.com>
Reviewed-by: NNikola Cornij <Nikola.Cornij@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Heavy corruption or blank screen reported on wake,
with 6k display connected and FEC enabled

[how]
When Disable/Enable stream for display pipes on HPDRX,
DC should take into account ODM split pipes.
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NVladimir Stempen <vladimir.stempen@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAnson Jacob <anson.jacob@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

When using cancel_delayed_work_sync, there's no need
to flush_delayed_work first. This sequence can lead to
a redundant loop of work executing.
Signed-off-by: NJingwen Chen <Jingwen.Chen2@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

the SpareX is reserved by SMU firmware, the driver is never use it.
Signed-off-by: NKevin Wang <kevin1.wang@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Merge tag 'amd-drm-next-5.12-2021-01-20' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-next-5.12-2021-01-20:

amdgpu:
- Fix non-x86 build
- W=1 fixes from Lee Jones
- Enable GPU reset on Navy Flounder
- Kernel doc fixes
- SMU workload profile fixes for APUs
- Display updates
- SR-IOV fixes
- Vangogh SMU feature enablment and bug fixes
- GPU reset support for Vangogh
- Misc cleanups

Conflicts:
	drivers/gpu/drm/amd/display/dc/dcn10/dcn10_mpc.c

Resolve the conflict by picking the initialization value from amd from
f03e80d2 ("drm/amd/display: Initialize stack variable") over the
one Linus picked in 61d79136 ("drm/amd/display: avoid
uninitialized variable warning"). It shouldn't matter.

From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210120060951.22600-1-alexander.deucher@amd.comSigned-off-by: NDaniel Vetter <daniel.vetter@intel.com>

drm-misc-next for v5.12:

UAPI Changes:
- Fix fourcc macro for amlogic video fbc.

Cross-subsystem Changes:
- Export pci_rebar_bytes_to_size.
- Add a PCI quirk to increase bar0 for RX 5600 XT Pulse to max possible size.
- Convert devicetree bindings to use the OF graph schema.
- Update s6e63m0 bindings.
- Make omapfb2 DSI_CM incompatible with drm/omap2 DSI-CM because of
  module conflicts.
- Add Zack Rusin as vmwgfx maintainer.
- Add CONFIG_DMABUF_DEBUG for validating dma-buf users don't loo kat struct page when importing or detaching.

Core Changes:
- Remove references to drm_device.pdev
- Fix regression in ttm_bo_move_to_lru_tail().
- Assorted docbook updates.
- Do not send dp-mst hotplug events on error when probing.
- Move some agp macros to agpsupport.c, so it's not always compiled.
- Move drm_need_swiotlb.h to drm_cache.c
- Only build drm_memory.o for legacy drivers, and move CONFIG_DRM_VM to legacy.
- Nuke drm_device.hose
- Warn when the ttm resource manager is non-empty when disabling.
- Assorted small fixes.

Driver Changes:
- Small assorted fixes in radeon, v3d, hisilicon, mipi-dbi, panfrost, hibmc, vc4, amdgpu, vkms, vmwgfx.
- Move hisilicon to use simple encode.
- Add writeback connector to vkms.
- Add support for BT2020 to DE3.
- Use gem prime mmap helpers in vc4, and move the mmap function upwards.
- Use managed drm device, and cleanup error paths and display registers in vmwgfx.
- Use correct bus_format and connector_type for innolux_n116bge.
- Fix a lot of warnings with W=1 (Lee Jones)
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5c3ad775-48ce-33ee-e4c6-a5e1e540f845@linux.intel.com

This patch is to fix below build error while we are using the kconfig
without x86.

drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_get_smu_metrics_data':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:300:10:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
  300 |          boot_cpu_data.x86_max_cores * sizeof(uint16_t));
      |          ^~~~~~~~~~~~~
      |          boot_cpuid
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_read_sensor':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1320:11:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
 1320 |   *size = boot_cpu_data.x86_max_cores * sizeof(uint16_t);
      |           ^~~~~~~~~~~~~
      |           boot_cpuid
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c: In function
'vangogh_od_edit_dpm_table':
drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu11/vangogh_ppt.c:1460:19:
error: 'boot_cpu_data' undeclared (first use in this function); did you
mean 'boot_cpuid'?
 1460 |   if (input[0] >= boot_cpu_data.x86_max_cores) {
      |                   ^~~~~~~~~~~~~
      |                   boot_cpuid

v2: fix #ifdef and add comment for APU only
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Commit 8f66090b ("drm/amdgpu: Remove references to struct drm_device.pdev")
accidentally adds an initialization of adev, which isn't used anywhere. This
caused a compiler warning on the unused variable, remove it.

Fixes: 8f66090b ("drm/amdgpu: Remove references to struct drm_device.pdev")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: NThomas Zimmermann <tzimmermann@suse.de>

To avoid any possible use after free.
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/414814/
CC: stable@vger.kernel.org
Signed-off-by: NChristian König <christian.koenig@amd.com>

Invalidate all BOs CPU mappings once device is removed.

v3: Move the code from TTM into drm_dev_unplug
Signed-off-by: NAndrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NDaniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/414809/Signed-off-by: NChristian König <christian.koenig@amd.com>

We have DRM drivers based on USB, SPI and platform devices. All of them
are fine with storing their device reference in struct drm_device.dev.
PCI devices should be no exception. Therefore struct drm_device.pdev is
deprecated.

Instead upcast from struct drm_device.dev with to_pci_dev(). PCI-specific
code can use dev_is_pci() to test for a PCI device. This patch changes
the DRM core code and documentation accordingly.

v4:
	* split-off pdev deprecation into separate patch
Signed-off-by: NThomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Tested-by: NAndy Lavr <andy.lavr@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210118131420.15874-2-tzimmermann@suse.de

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/drm_agpsupport.c:61: warning: Function parameter or member 'dev' not described in 'drm_agp_info'
 drivers/gpu/drm/drm_agpsupport.c:61: warning: Function parameter or member 'info' not described in 'drm_agp_info'
 drivers/gpu/drm/drm_agpsupport.c:105: warning: Function parameter or member 'dev' not described in 'drm_agp_acquire'
 drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'dev' not described in 'drm_agp_acquire_ioctl'
 drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'data' not described in 'drm_agp_acquire_ioctl'
 drivers/gpu/drm/drm_agpsupport.c:132: warning: Function parameter or member 'file_priv' not described in 'drm_agp_acquire_ioctl'
 drivers/gpu/drm/drm_agpsupport.c:145: warning: Function parameter or member 'dev' not described in 'drm_agp_release'
 drivers/gpu/drm/drm_agpsupport.c:171: warning: Function parameter or member 'dev' not described in 'drm_agp_enable'
 drivers/gpu/drm/drm_agpsupport.c:171: warning: Function parameter or member 'mode' not described in 'drm_agp_enable'
 drivers/gpu/drm/drm_agpsupport.c:203: warning: Function parameter or member 'dev' not described in 'drm_agp_alloc'
 drivers/gpu/drm/drm_agpsupport.c:203: warning: Function parameter or member 'request' not described in 'drm_agp_alloc'
 drivers/gpu/drm/drm_agpsupport.c:256: warning: Function parameter or member 'dev' not described in 'drm_agp_lookup_entry'
 drivers/gpu/drm/drm_agpsupport.c:256: warning: Function parameter or member 'handle' not described in 'drm_agp_lookup_entry'
 drivers/gpu/drm/drm_agpsupport.c:279: warning: Function parameter or member 'dev' not described in 'drm_agp_unbind'
 drivers/gpu/drm/drm_agpsupport.c:279: warning: Function parameter or member 'request' not described in 'drm_agp_unbind'
 drivers/gpu/drm/drm_agpsupport.c:318: warning: Function parameter or member 'dev' not described in 'drm_agp_bind'
 drivers/gpu/drm/drm_agpsupport.c:318: warning: Function parameter or member 'request' not described in 'drm_agp_bind'
 drivers/gpu/drm/drm_agpsupport.c:363: warning: Function parameter or member 'dev' not described in 'drm_agp_free'
 drivers/gpu/drm/drm_agpsupport.c:363: warning: Function parameter or member 'request' not described in 'drm_agp_free'
 drivers/gpu/drm/drm_agpsupport.c:404: warning: Function parameter or member 'dev' not described in 'drm_agp_init'

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Faith <faith@valinux.com>
Cc: Gareth Hughes <gareth@valinux.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-24-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/gma500/mdfld_intel_display.c:103: warning: Function parameter or member 'dev' not described in 'psb_intel_panel_fitter_pipe'
 drivers/gpu/drm/gma500/mdfld_intel_display.c:273: warning: Function parameter or member 'crtc' not described in 'mdfld_crtc_dpms'
 drivers/gpu/drm/gma500/mdfld_intel_display.c:273: warning: Function parameter or member 'mode' not described in 'mdfld_crtc_dpms'
 drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'crtc' not described in 'mdfldFindBestPLL'
 drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'target' not described in 'mdfldFindBestPLL'
 drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'refclk' not described in 'mdfldFindBestPLL'
 drivers/gpu/drm/gma500/mdfld_intel_display.c:609: warning: Function parameter or member 'best_clock' not described in 'mdfldFindBestPLL'

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-23-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'dev' not described in 'mdfld_dsi_gen_fifo_ready'
 drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'gen_fifo_stat_reg' not described in 'mdfld_dsi_gen_fifo_ready'
 drivers/gpu/drm/gma500/mdfld_dsi_output.c:71: warning: Function parameter or member 'fifo_stat' not described in 'mdfld_dsi_gen_fifo_ready'
 drivers/gpu/drm/gma500/mdfld_dsi_output.c:95: warning: Function parameter or member 'dsi_config' not described in 'mdfld_dsi_brightness_init'
 drivers/gpu/drm/gma500/mdfld_dsi_output.c:95: warning: Function parameter or member 'pipe' not described in 'mdfld_dsi_brightness_init'

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: jim liu <jim.liu@intel.com>
Cc: Jackie Li <yaodong.li@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-22-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'limit' not described in 'mrst_lvds_find_best_pll'
 drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'crtc' not described in 'mrst_lvds_find_best_pll'
 drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'target' not described in 'mrst_lvds_find_best_pll'
 drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'refclk' not described in 'mrst_lvds_find_best_pll'
 drivers/gpu/drm/gma500/oaktrail_crtc.c:184: warning: Function parameter or member 'best_clock' not described in 'mrst_lvds_find_best_pll'
 drivers/gpu/drm/gma500/oaktrail_crtc.c:215: warning: Function parameter or member 'crtc' not described in 'oaktrail_crtc_dpms'
 drivers/gpu/drm/gma500/oaktrail_crtc.c:215: warning: Function parameter or member 'mode' not described in 'oaktrail_crtc_dpms'
 drivers/gpu/drm/gma500/oaktrail_crtc.c:345: warning: Function parameter or member 'dev' not described in 'oaktrail_panel_fitter_pipe'

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-21-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'dev' not described in 'oaktrail_lvds_set_power'
 drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'gma_encoder' not described in 'oaktrail_lvds_set_power'
 drivers/gpu/drm/gma500/oaktrail_lvds.c:38: warning: Function parameter or member 'on' not described in 'oaktrail_lvds_set_power'
 drivers/gpu/drm/gma500/oaktrail_lvds.c:291: warning: Function parameter or member 'mode_dev' not described in 'oaktrail_lvds_init'

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-20-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c: In function ‘get_clock’:
 drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c:69:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]
 drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c: In function ‘get_data’:
 drivers/gpu/drm/gma500/oaktrail_lvds_i2c.c:83:11: warning: variable ‘tmp’ set but not used [-Wunused-but-set-variable]

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Jan Safrata <jan.nikitenko@gmail.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-19-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/gma500/cdv_intel_dp.c:315: warning: Function parameter or member 'encoder' not described in 'is_edp'
 drivers/gpu/drm/gma500/cdv_intel_dp.c:315: warning: Excess function parameter 'intel_dp' description in 'is_edp'
 drivers/gpu/drm/gma500/cdv_intel_dp.c:1698: warning: Function parameter or member 'connector' not described in 'cdv_intel_dp_detect'
 drivers/gpu/drm/gma500/cdv_intel_dp.c:1698: warning: Function parameter or member 'force' not described in 'cdv_intel_dp_detect'

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Keith Packard <keithp@keithp.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-18-lee.jones@linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-17-lee.jones@linaro.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/gma500/cdv_intel_lvds.c:83: warning: Function parameter or member 'dev' not described in 'cdv_intel_lvds_set_backlight'
 drivers/gpu/drm/gma500/cdv_intel_lvds.c:83: warning: Function parameter or member 'level' not described in 'cdv_intel_lvds_set_backlight'
 drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'dev' not described in 'cdv_intel_lvds_set_power'
 drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'encoder' not described in 'cdv_intel_lvds_set_power'
 drivers/gpu/drm/gma500/cdv_intel_lvds.c:107: warning: Function parameter or member 'on' not described in 'cdv_intel_lvds_set_power'
 drivers/gpu/drm/gma500/cdv_intel_lvds.c:298: warning: Function parameter or member 'connector' not described in 'cdv_intel_lvds_get_modes'
 drivers/gpu/drm/gma500/cdv_intel_lvds.c:480: warning: Function parameter or member 'mode_dev' not described in 'cdv_intel_lvds_init'

Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: Jesse Barnes <jesse.barnes@intel.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: NLee Jones <lee.jones@linaro.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210115181601.3432599-17-lee.jones@linaro.org