Remove the last mentions of radix tree from various comments.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Switch to a batch-processing model like memfd_wait_for_pins() and
use the xa_state previously set up by memfd_wait_for_pins().
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>

Simplify the locking by taking the spinlock while we walk the tree on
the assumption that many acquires and releases of the lock will be worse
than holding the lock while we process an entire batch of pages.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>

Simpler code because the xarray takes care of things like the limit and
dereferencing the slot.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Since we are conditionally storing NULL in the XArray, we do not need
to allocate memory and the GFP flags will be unused.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

xa_find() is a slightly easier API to use than
radix_tree_gang_lookup_slot() because it contains its own RCU locking.
This commit removes the last user of radix_tree_gang_lookup_slot()
so remove the function too.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

We can use xas_find_conflict() instead of radix_tree_gang_lookup_slot()
to find any conflicting entry and combine the three paths through this
function into one.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

This is a 1:1 conversion.  The major part of this patch is converting
the test framework from userspace to kernel space and mirroring the
algorithm now used in find_swap_entry().
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

xa_load has its own RCU locking, so we can eliminate it here.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Rename shmem_radix_tree_replace() to shmem_replace_entry() and
convert it to use the XArray API.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Removes sparse warnings.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

This is just a variable rename and comment change.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Slightly shorter and easier to read code.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

I found another victim of the radix tree being hard to use.  Because
there was no call to radix_tree_preload(), khugepaged was allocating
radix_tree_nodes using GFP_ATOMIC.

I also converted a local_irq_save()/restore() pair to
disable()/enable().
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Quite a straightforward conversion.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Signed-off-by: NMatthew Wilcox <willy@infradead.org>

This one is trivial.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Both callers of __delete_from_swap_cache have the swp_entry_t already,
so pass that in to make constructing the XA_STATE easier.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Combine __add_to_swap_cache and add_to_swap_cache into one function
since there is no more need to preload.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

This is essentially xa_cmpxchg() with the locking handled above us,
and it doesn't have to handle replacing a NULL entry.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

We construct an XA_STATE and use it to delete the node with
xas_store() rather than adding a special function for this unique
use case.  Includes a test that simulates this usage for the
test suite.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Includes moving mapping_tagged() to fs.h as a static inline, and
changing it to return bool.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Instead of calling find_get_pages_range() and putting any reference,
use xas_find() to iterate over any entries in the range, skipping the
shadow/swap entries.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Rename the function from page_cache_tree_delete_batch to just
page_cache_delete_batch.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Now the page cache lookup is using the XArray, let's convert this
regression test from the radix tree API to the XArray so it's testing
roughly the same thing it was testing before.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Slight change of strategy here; if we have trouble getting hold of a
page for whatever reason (eg a compound page is split underneath us),
don't spin to stabilise the page, just continue the iteration, like we
would if we failed to trylock the page.  Since this is a speculative
optimisation, it feels like we should allow the process to take an extra
fault if it turns out to need this page instead of spending time to pin
down a page it may not need.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Slightly shorter and simpler code.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

The 'end' parameter of the xas_for_each iterator avoids a useless
iteration at the end of the range.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

There's no direct replacement for radix_tree_for_each_contig()
in the XArray API as it's an unusual thing to do.  Instead,
open-code a loop using xas_next().  This removes the only user of
radix_tree_for_each_contig() so delete the iterator from the API and
the test suite code for it.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

The 'end' parameter of the xas_for_each iterator avoids a useless
iteration at the end of the range.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Slightly shorter and simpler code.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Slightly shorter and simpler code.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

The code is slightly shorter and simpler.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Use the XArray APIs to add and replace pages in the page cache.  This
removes two uses of the radix tree preload API and is significantly
shorter code.  It also removes the last user of __radix_tree_create()
outside radix-tree.c itself, so make it static.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

The page cache offers the ability to search for a miss in the previous or
next N locations.  Rather than teach the XArray about the page cache's
definition of a miss, use xas_prev() and xas_next() to search the page
array.  This should be more efficient as it does not have to start the
lookup from the top for each index.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Change i_pages from a radix_tree_root to an xarray, convert the
documentation into kernel-doc format and change the order of the elements
to pack them better on 64-bit systems.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Use the XA_TRACK_FREE ability to track which entries have a free bit,
similarly to how it uses the radix tree's IDR_FREE tag.  This eliminates
the per-cpu ida_bitmap preload, and fixes the memory consumption
regression I introduced when making the IDR able to store any pointer.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Add the optional ability to track which entries in an XArray are free
and provide xa_alloc() to replace most of the functionality of the IDR.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>

Add myself as XArray and IDR maintainer.
Signed-off-by: NMatthew Wilcox <willy@infradead.org>