- 10 5月, 2011 4 次提交
-
-
由 Mikulas Patocka 提交于
Remove unused variable Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Fix endianity. Make hpfs work on big-endian machines. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Remove CR/LF conversion option It is unused anyway. It was used on 2.2 kernels or so. Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mikulas Patocka 提交于
Remove remaining locks Because of a new global per-fs lock, no other locks are needed Signed-off-by: NMikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 3月, 2011 1 次提交
-
-
由 Arnd Bergmann 提交于
This removes the BKL in hpfs in a rather awful way, by making the code only work on uniprocessor systems without kernel preemption, as suggested by Andi Kleen. The HPFS code probably has close to zero remaining users on current kernels, all archeological uses of the file system can probably be done with the significant restrictions. The hpfs_lock/hpfs_unlock functions are left in the code, sincen Mikulas has indicated that he is still interested in fixing it in a better way. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NAndi Kleen <ak@linux.intel.com> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: linux-fsdevel@vger.kernel.org
-
- 07 1月, 2011 1 次提交
-
-
由 Nick Piggin 提交于
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
- 04 3月, 2010 2 次提交
-
-
由 Al Viro 提交于
Just use dentry_unhash() there Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 13 7月, 2009 1 次提交
-
-
由 Alexey Dobriyan 提交于
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 11月, 2008 1 次提交
-
-
由 David Howells 提交于
Wrap access to task credentials so that they can be separated more easily from the task_struct during the introduction of COW creds. Change most current->(|e|s|fs)[ug]id to current_(|e|s|fs)[ug]id(). Change some task->e?[ug]id to task_e?[ug]id(). In some places it makes more sense to use RCU directly rather than a convenient wrapper; these will be addressed by later patches. Signed-off-by: NDavid Howells <dhowells@redhat.com> Reviewed-by: NJames Morris <jmorris@namei.org> Acked-by: NSerge Hallyn <serue@us.ibm.com> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Signed-off-by: NJames Morris <jmorris@namei.org>
-
- 23 10月, 2008 1 次提交
-
-
由 Christoph Hellwig 提交于
Reformat hpfs_notify_change to standard kernel style to make it readable and rename it to hpfs_setattr as that's what the method is called. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 27 7月, 2008 1 次提交
-
-
由 Miklos Szeredi 提交于
hpfs_unlink() calls permission() prior to truncating the file. HPFS doesn't define a .permission method, so replace with explicit call to generic_permission(). This is equivalent, except that devcgroup_inode_permission() and security_inode_permission() are not called. The truncation is just an implementation detail of the unlink, so these security checks are unnecessary. I suspect that even calling generic_permission() is unnecessary, since we shouldn't mind if the file isn't writable. But I leave that to the maintainer to decide. Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz> CC: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
-
- 22 5月, 2007 1 次提交
-
-
由 Alexey Dobriyan 提交于
First thing mm.h does is including sched.h solely for can_do_mlock() inline function which has "current" dereference inside. By dealing with can_do_mlock() mm.h can be detached from sched.h which is good. See below, why. This patch a) removes unconditional inclusion of sched.h from mm.h b) makes can_do_mlock() normal function in mm/mlock.c c) exports can_do_mlock() to not break compilation d) adds sched.h inclusions back to files that were getting it indirectly. e) adds less bloated headers to some files (asm/signal.h, jiffies.h) that were getting them indirectly Net result is: a) mm.h users would get less code to open, read, preprocess, parse, ... if they don't need sched.h b) sched.h stops being dependency for significant number of files: on x86_64 allmodconfig touching sched.h results in recompile of 4083 files, after patch it's only 3744 (-8.3%). Cross-compile tested on all arm defconfigs, all mips defconfigs, all powerpc defconfigs, alpha alpha-up arm i386 i386-up i386-defconfig i386-allnoconfig ia64 ia64-up m68k mips parisc parisc-up powerpc powerpc-up s390 s390-up sparc sparc-up sparc64 sparc64-up um-x86_64 x86_64 x86_64-up x86_64-defconfig x86_64-allnoconfig as well as my two usual configs. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Arjan van de Ven 提交于
Many struct inode_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: NArjan van de Ven <arjan@linux.intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 10月, 2006 3 次提交
-
-
由 Dave Hansen 提交于
Some filesystems, instead of simply decrementing i_nlink, simply zero it during an unlink operation. We need to catch these in addition to the decrement operations. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Acked-by: NChristoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
This is mostly included for parity with dec_nlink(), where we will have some more hooks. This one should stay pretty darn straightforward for now. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Acked-by: NChristoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Dave Hansen 提交于
When a filesystem decrements i_nlink to zero, it means that a write must be performed in order to drop the inode from the filesystem. We're shortly going to have keep filesystems from being remounted r/o between the time that this i_nlink decrement and that write occurs. So, add a little helper function to do the decrements. We'll tie into it in a bit to note when i_nlink hits zero. Signed-off-by: NDave Hansen <haveblue@us.ibm.com> Acked-by: NChristoph Hellwig <hch@lst.de> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 29 6月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
Same as with already do with the file operations: keep them in .rodata and prevents people from doing runtime patching. Signed-off-by: NChristoph Hellwig <hch@lst.de> Cc: Steven French <sfrench@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 23 3月, 2006 1 次提交
-
-
由 Ingo Molnar 提交于
Semaphore to mutex conversion. The conversion was generated via scripts, and the result was validated automatically via a script as well. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-