Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 06 7月, 2008 1 次提交
  3. 04 7月, 2008 10 次提交
    • L
      fs_enet: restore promiscuous and multicast settings in restart() · c5a78ac0
      由 Laurent Pinchart 提交于 
      The restart() function is called when the link state changes and resets
multicast and promiscuous settings. This patch restores those settings at the
end of restart().
Signed-off-by: NLaurent Pinchart <laurentp@cse-semaphore.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      c5a78ac0
    • S
      ibm_newemac: Fixes entry of short packets · 6c688f42
      由 Sathya Narayanan 提交于 
      Short packets has to be discarded by the driver. So this patch addresses the
issue of discarding the short packets of size lesser then ethernet header
size.
Signed-off-by: NSathya Narayanan <sathyan@teamf1.com>
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      6c688f42
    • S
      ibm_newemac: Fixes kernel crashes when speed of cable connected changes · ab9b30cc
      由 Sathya Narayanan 提交于 
      The descriptor pointers were not initialized to NIL values, so it was
poiniting to some random addresses which was completely invalid. This
fix takes care of initializing the descriptor to NIL values and clearing
the valid descriptors on clean ring operation.
Signed-off-by: NSathya Narayanan <sathyan@teamf1.com>
Signed-off-by: NStefan Roese <sr@denx.de>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      ab9b30cc
    • R
      pasemi_mac: Access iph->tot_len with correct endianness · 77321233
      由 Roland Dreier 提交于 
      iph->tot_len is stored in network byte order, so access it using
ntohs().  This doesn't have any real world impact on pasemi_mac, since
the device only exists as part of a big-endian system-on-chip, but
fixing this gets rid of a sparse warning and avoids having a bad example
in the tree.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      77321233
    • R
      ehea: Access iph->tot_len with correct endianness · 3ff2cd23
      由 Roland Dreier 提交于 
      iph->tot_len is stored in network byte order, so access it using
ntohs().  This doesn't have any real world impact on ehea, since ehea
only exists for big-endian platfroms (at the moment at least) but fixing
this gets rid of a sparse warning and avoids having a bad example in the
tree.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      3ff2cd23
    • J
      ehea: fix race condition · 2f69ae01
      由 Jan-Bernd Themann 提交于 
      When ehea_stop is called the function
cancel_work_sync(&port->reset_task) is used to ensure
that the reset task is not running anymore. We need an
additional flag to ensure that it can not be scheduled
after this call again for a certain time.
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      2f69ae01
    • J
      ehea: add MODULE_DEVICE_TABLE · b0afffe8
      由 Jan-Bernd Themann 提交于 
      Required to allow distros to easily detect when ehea
module needs to be loaded
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      b0afffe8
    • J
      ehea: fix might sleep problem · 5c2cec14
      由 Jan-Bernd Themann 提交于 
      A mutex has to be replaced by spinlocks as it can be called from
a context which does not allow sleeping.
The kzalloc flag GFP_KERNEL has to be replaced by GFP_ATOMIC
for the same reason.
Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      5c2cec14
    • T
      forcedeth: fix lockdep warning on ethtool -s · 97bff095
      由 Tobias Diedrich 提交于 
      After enabling CONFIG_LOCKDEP and CONFIG_PROVE_LOCKING I get the
following warning when ethtool -s is first called on one of the
forcedeth ports:

=================================
[ INFO: inconsistent lock state ]
2.6.26-rc4 #28
---------------------------------
inconsistent {in-hardirq-W} -> {hardirq-on-W} usage.
ethtool/1985 [HC0[0]:SC0[1]:HE1:SE0] takes:
 (&np->lock){++..}, at: [<ffffffffa000c5fd>] nv_set_settings+0xc8/0x3de [forcedeth]
{in-hardirq-W} state was registered at:
  [<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 3606
hardirqs last  enabled at (3605): [<ffffffff8068106f>] _spin_unlock_irqrestore+0x3f/0x68
hardirqs last disabled at (3604): [<ffffffff80680d38>] _spin_lock_irqsave+0x13/0x46
softirqs last  enabled at (3534): [<ffffffff80246ba5>] __do_softirq+0xbc/0xc5
softirqs last disabled at (3606): [<ffffffff80680b33>] _spin_lock_bh+0x11/0x41

other info that might help us debug this:
2 locks held by ethtool/1985:
 #0:  (rtnl_mutex){--..}, at: [<ffffffff80596072>] rtnl_lock+0x12/0x14
 #1:  (_xmit_ETHER){-+..}, at: [<ffffffffa000c5e8>] nv_set_settings+0xb3/0x3de [forcedeth]
stack backtrace:
Pid: 1985, comm: ethtool Not tainted 2.6.26-rc4 #28
Call Trace:
 [<ffffffff8025f190>] print_usage_bug+0x162/0x173
 [<ffffffff8025fa8b>] mark_lock+0x231/0x41f
 [<ffffffff802607cf>] __lock_acquire+0x4e7/0xcac
 [<ffffffff8025fe64>] ? trace_hardirqs_on+0xf1/0x115
 [<ffffffff80272c3a>] ? disable_irq_nosync+0x6f/0x7b
 [<ffffffff80261375>] lock_acquire+0x55/0x6e
 [<ffffffffa000c5fd>] ? :forcedeth:nv_set_settings+0xc8/0x3de
 [<ffffffff80680b15>] _spin_lock+0x2f/0x3c
 [<ffffffffa000c5fd>] :forcedeth:nv_set_settings+0xc8/0x3de
 [<ffffffff8058f8bb>] dev_ethtool+0x186/0xea3
 [<ffffffff8067f446>] ? mutex_lock_nested+0x243/0x275
 [<ffffffff8025df2b>] ? debug_mutex_free_waiter+0x46/0x4a
 [<ffffffff8067f469>] ? mutex_lock_nested+0x266/0x275
 [<ffffffff8058e1ce>] dev_ioctl+0x4eb/0x600
 [<ffffffff8068106f>] ? _spin_unlock_irqrestore+0x3f/0x68
 [<ffffffff80580f91>] sock_ioctl+0x1f5/0x202
 [<ffffffff802a322e>] vfs_ioctl+0x2a/0x77
 [<ffffffff802a34d6>] do_vfs_ioctl+0x25b/0x270
 [<ffffffff806807b6>] ? trace_hardirqs_on_thunk+0x35/0x3a
 [<ffffffff802a352d>] sys_ioctl+0x42/0x65
 [<ffffffff8021fffb>] system_call_after_swapgs+0x7b/0x80

This is caused by the following snippet in nv_set_settings:

	netif_carrier_off(dev);
	if (netif_running(dev)) {
		nv_disable_irq(dev);
		netif_tx_lock_bh(dev);
		spin_lock(&np->lock);
		/* stop engines */
		nv_stop_rxtx(dev);
		spin_unlock(&np->lock);
		netif_tx_unlock_bh(dev);
	}

Because of nv_disable_irq this is probably not really a problem
though (I guess) and replacing the spin_lock with spin_lock_irqsave
could keep interrupts disabled for a longer period of time because
of delays in nv_stop_rx and nv_stop_tx.
Signed-off-by: NTobias Diedrich <ranma+kernel@tdiedrich.de>
Cc: Ayaz Abdulla <aabdulla@nvidia.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      97bff095
    • K
      Add missing skb->dev assignment in Frame Relay RX code · 54364b75
      由 Krzysztof Halasa 提交于 
      Commit 4c13eb66 ([ETH]: Make
eth_type_trans set skb->dev like the other *_type_trans) removed
skb->dev assignment from hdlc_fr.c:fr_rx(). Unfortunately it was also
needed for cases other than eth_type_trans().

Adding it back.

It's quite serious and may be a security risk as it causes a wrong
input interface indication (the physical hdlcX instead of logical
pvcX). Probably -stable class fix.
Signed-off-by: NKrzysztof Halasa <khc@pm.waw.pl>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
      54364b75
  5. 03 7月, 2008 29 次提交