Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 11月, 2019 1 次提交
    • A
      perf dso: Move dso_id from 'struct map' to 'struct dso' · 0e3149f8
      由 Arnaldo Carvalho de Melo 提交于 
      And take it into account when looking up DSOs when we have the dso_id
fields obtained from somewhere, like from PERF_RECORD_MMAP2 records.

Instances of struct map pointing to the same DSO pathname but with
anything in dso_id different are in fact different DSOs, so better have
different 'struct dso' instances to reflect that. At some point we may
want to get copies of the contents of the different objects if we want
to do correct annotation or other analysis.

With this we get 'struct map' 24 bytes leaner:

  $ pahole -C map ~/bin/perf
  struct map {
  	union {
  		struct rb_node     rb_node __attribute__((__aligned__(8))); /*     0    24 */
  		struct list_head   node;                 /*     0    16 */
  	} __attribute__((__aligned__(8)));               /*     0    24 */
  	u64                        start;                /*    24     8 */
  	u64                        end;                  /*    32     8 */
  	_Bool                      erange_warned:1;      /*    40: 0  1 */
  	_Bool                      priv:1;               /*    40: 1  1 */

  	/* XXX 6 bits hole, try to pack */
  	/* XXX 3 bytes hole, try to pack */

  	u32                        prot;                 /*    44     4 */
  	u64                        pgoff;                /*    48     8 */
  	u64                        reloc;                /*    56     8 */
  	/* --- cacheline 1 boundary (64 bytes) --- */
  	u64                        (*map_ip)(struct map *, u64); /*    64     8 */
  	u64                        (*unmap_ip)(struct map *, u64); /*    72     8 */
  	struct dso *               dso;                  /*    80     8 */
  	refcount_t                 refcnt;               /*    88     4 */
  	u32                        flags;                /*    92     4 */

  	/* size: 96, cachelines: 2, members: 13 */
  	/* sum members: 92, holes: 1, sum holes: 3 */
  	/* sum bitfield members: 2 bits, bit holes: 1, sum bit holes: 6 bits */
  	/* forced alignments: 1 */
  	/* last cacheline: 32 bytes */
  } __attribute__((__aligned__(8)));
  $

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-g4hxxmraplo7wfjmk384mfsb@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0e3149f8
  3. 07 11月, 2019 2 次提交
  5. 01 9月, 2019 2 次提交
  7. 09 7月, 2019 2 次提交
  9. 02 7月, 2019 1 次提交
  11. 29 5月, 2019 4 次提交
  13. 20 3月, 2019 2 次提交
    • S
      perf symbols: Introduce DSO_BINARY_TYPE__BPF_PROG_INFO · 9b86d04d
      由 Song Liu 提交于 
      Introduce a new dso type DSO_BINARY_TYPE__BPF_PROG_INFO for BPF programs. In
symbol__disassemble(), DSO_BINARY_TYPE__BPF_PROG_INFO dso will call into a new
function symbol__disassemble_bpf() in an upcoming patch, where annotation line
information is filled based bpf_prog_info and btf saved in given perf_env.

Committer notes:

Removed the unnamed union with 'bpf_prog' and 'cache' in 'struct dso',
to fix this bug when exiting 'perf top':

  # perf top
  perf: Segmentation fault
  -------- backtrace --------
  perf[0x5a785a]
  /lib64/libc.so.6(+0x385bf)[0x7fd68443c5bf]
  perf(rb_first+0x2b)[0x4d6eeb]
  perf(dso__delete+0xb7)[0x4dffb7]
  perf[0x4f9e37]
  perf(perf_session__delete+0x64)[0x504df4]
  perf(cmd_top+0x1957)[0x454467]
  perf[0x4aad18]
  perf(main+0x61c)[0x42ec7c]
  /lib64/libc.so.6(__libc_start_main+0xf2)[0x7fd684428412]
  perf(_start+0x2d)[0x42eead]
  #
  # addr2line -fe ~/bin/perf 0x4dffb7
  dso_cache__free
  /home/acme/git/perf/tools/perf/util/dso.c:713

That is trying to access the dso->data.cache, and that is not used with
BPF programs, so we end up accessing what is in bpf_prog.first_member,
b00m.
Signed-off-by: NSong Liu <songliubraving@fb.com>
Reviewed-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stanislav Fomichev <sdf@google.com>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com
[ split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      9b86d04d
    • A
      perf report: Indicate JITed code better in report · a4e7e6ef
      由 Andi Kleen 提交于 
      Print [TID] tid %d instead of the crypted /tmp/perf-%d.map default.

% cat >loop.java
  public class loop {
          public static void main(String[] args)
          {
                  for (;;);
          }
  }
  ^D
  % javac loop.java
  % perf record java loop
  ^C

Before:

  % perf report --stdio
  ...
      56.09%  java     perf-34724.map      [.] 0x00007fd5bd021896
      19.12%  java     perf-34724.map      [.] 0x00007fd5bd021887
       9.79%  java     perf-34724.map      [.] 0x00007fd5bd021783
       8.97%  java     perf-34724.map      [.] 0x00007fd5bd02175b

After:

  % perf report --stdio
  ...
      56.09%  java     [JIT] tid 34724     [.] 0x00007fd5bd021896
      19.12%  java     [JIT] tid 34724     [.] 0x00007fd5bd021887
       9.79%  java     [JIT] tid 34724     [.] 0x00007fd5bd021783
       8.97%  java     [JIT] tid 34724     [.] 0x00007fd5bd02175b
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
LPU-Reference: 20190314225002.30108-7-andi@firstfloor.org
Link: https://lkml.kernel.org/n/tip-r17l6py9g0sezb7mi1f286gt@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a4e7e6ef
  15. 06 2月, 2019 1 次提交
  17. 25 1月, 2019 4 次提交
  19. 18 12月, 2018 2 次提交
  21. 20 8月, 2018 9 次提交
  23. 06 6月, 2018 1 次提交
  25. 27 4月, 2018 1 次提交
    • A
      perf symbols: Unify symbol maps · 3183f8ca
      由 Arnaldo Carvalho de Melo 提交于 
      Remove the split of symbol tables for data (MAP__VARIABLE) and for
functions (MAP__FUNCTION), its unneeded and there were various places
doing two lookups to find a symbol, so simplify this.

We still will consider only the symbols that matched the filters in
place, i.e. see the (elf_(sec,sym)|symbol_type)__filter() routines in
the patch, just so that we consider only the same symbols as before,
to reduce the possibility of regressions.

All the tests on 50-something build environments, in varios versions
of lots of distros and cross build environments were performed without
build regressions, as usual with all pull requests the other tests were
also performed: 'perf test' and 'make -C tools/perf build-test'.

Also this was done at a great granularity so that regressions can be
bisected more easily.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-hiq0fy2rsleupnqqwuojo1ne@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      3183f8ca
  27. 23 1月, 2018 1 次提交
    • W
      perf symbols: Using O_CLOEXEC in do_open · 4c0d8d27
      由 Wang YanQing 提交于 
      I've meet a strange behavior with these commands on my gentoo box:

1: perf kmem record
2: CTRL-C to stop 1
3: perf report
4: "Enter", "Enter", "Run scripts for all samples",
   "event_analyzing_sample".

Then 'perf report' says:

  "
  No kallsyms or vmlinux with build-id xxxx was found
  /lib/modules/4.10.0+/build/vmlinux with build id xxxx not found,
  continuing without symbols
  ".

It is strange because I am sure /lib/modules/4.10.0+/build/vmlinux is
right for perf.data.

After digging, I found out the reason is that "perf report" generates
many open fds, then "script_browse" uses popen to run "perf script"
which run out of open files.

The gentoo box has a small default value for "max open files", 1024.
Yes, "ulimit -n " with a bigger number could fix it, but I think that
using O_CLOEXEC in do_open is a better way.
Signed-off-by: NWang YanQing <udknight@gmail.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20180115050448.GA20759@udknight
[ Make sure O_CLOEXEC is available in old systems by adding a patch
  just before this one, to keep this bisectable in such systems ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      4c0d8d27
  29. 02 11月, 2017 1 次提交
    • G
      License cleanup: add SPDX GPL-2.0 license identifier to files with no license · b2441318
      由 Greg Kroah-Hartman 提交于 
      Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b2441318
  31. 25 10月, 2017 1 次提交
    • M
      perf report: Cache srclines for callchain nodes · 21ac9d54
      由 Milian Wolff 提交于 
      On one hand this ensures that the memory is properly freed when the DSO
gets freed. On the other hand this significantly speeds up the
processing of the callchain nodes when lots of srclines are requested.
For one of my data files e.g.:

Before:

 Performance counter stats for 'perf report -s srcline -g srcline --stdio':

      52496.495043      task-clock (msec)         #    0.999 CPUs utilized
               634      context-switches          #    0.012 K/sec
                 2      cpu-migrations            #    0.000 K/sec
           191,561      page-faults               #    0.004 M/sec
   165,074,498,235      cycles                    #    3.144 GHz
   334,170,832,408      instructions              #    2.02  insn per cycle
    90,220,029,745      branches                  # 1718.591 M/sec
       654,525,177      branch-misses             #    0.73% of all branches

      52.533273822 seconds time elapsedProcessed 236605 events and lost 40 chunks!

After:

 Performance counter stats for 'perf report -s srcline -g srcline --stdio':

      22606.323706      task-clock (msec)         #    1.000 CPUs utilized
                31      context-switches          #    0.001 K/sec
                 0      cpu-migrations            #    0.000 K/sec
           185,471      page-faults               #    0.008 M/sec
    71,188,113,681      cycles                    #    3.149 GHz
   133,204,943,083      instructions              #    1.87  insn per cycle
    34,886,384,979      branches                  # 1543.214 M/sec
       278,214,495      branch-misses             #    0.80% of all branches

      22.609857253 seconds time elapsed

Note that the difference is only this large when `--inline` is not
passed. In such situations, we would use the inliner cache and thus do
not run this code path that often.

I think that this cache should actually be used in other places, too.
When looking at the valgrind leak report for perf report, we see tons of
srclines being leaked, most notably from calls to
hist_entry__get_srcline. The problem is that get_srcline has many
different formatting options (show_sym, show_addr, potentially even
unwind_inlines when calling __get_srcline directly). As such, the
srcline cannot easily be cached for all calls, or we'd have to add
caches for all formatting combinations (6 so far). An alternative would
be to remove the formatting options and handle that on a different level
- i.e. print the sym/addr on demand wherever we actually output
something. And the unwind_inlines could be moved into a separate
function that does not return the srcline.
Signed-off-by: NMilian Wolff <milian.wolff@kdab.com>
Reviewed-by: NAndi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20171019113836.5548-4-milian.wolff@kdab.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      21ac9d54
  33. 24 10月, 2017 1 次提交
  35. 22 9月, 2017 1 次提交
    • A
      perf tools: Provide mutex wrappers for pthreads rwlocks · 0a7c74ea
      由 Arnaldo Carvalho de Melo 提交于 
      Andi reported a performance drop in single threaded perf tools such as
'perf script' due to the growing number of locks being put in place to
allow for multithreaded tools, so wrap the POSIX threads rwlock routines
with the names used for such kinds of locks in the Linux kernel and then
allow for tools to ask for those locks to be used or not.

I.e. a tool may have a multithreaded phase and then switch to single
threaded, like the upcoming patches for the synthesizing of
PERF_RECORD_{FORK,MMAP,etc} for pre-existing processes to then switch to
single threaded mode in 'perf top'.

The init routines will not be conditional, this way starting as single
threaded to then move to multi threaded mode should be possible.
Reported-by: NAndi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/20170404161739.GH12903@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0a7c74ea
  37. 13 9月, 2017 1 次提交
  39. 19 7月, 2017 2 次提交