Revert "iommu/intel-iommu: Enable CONFIG_DMA_DIRECT_OPS=y and clean up intel_{alloc,free}_coherent()"

This commit may cause a less than required dma mask to be used for
some allocations, which apparently leads to module load failures for
iwlwifi sometimes.

This reverts commit d657c5c7.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reported-by: NFabio Coatti <fabio.coatti@gmail.com>
Tested-by: NFabio Coatti <fabio.coatti@gmail.com>

Pull ACPI fixes from Rafael Wysocki:
 "These fix a recent ACPICA regression, fix a battery driver regression
  introduced during the 4.17 cycle and fix up the recently added support
  for the PPTT ACPI table.

  Specifics:

   - Revert part of a recent ACPICA regression fix that added leading
     newlines to ACPICA error messages and made the kernel log look
     broken (Rafael Wysocki).

   - Fix an ACPI battery driver regression introduced during the 4.17
     cycle due to incorrect error handling that made Thinkpad 13 laptops
     crash on boot (Jouke Witteveen).

   - Fix up the recently added PPTT ACPI table support by covering the
     case when a PPTT structure represents a processors group correctly
     (Sudeep Holla)"

* tag 'acpi-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI / battery: Safe unregistering of hooks
  ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set
  ACPICA: Drop leading newlines from error messages

Pull power management fixes from Rafael Wysocki:
 "These fix a PCI power management regression introduced during the 4.17
  cycle and fix up the recently added support for devices in multiple
  power domains.

  Specifics:

   - Resume parallel PCI (non-PCIe) bridges on suspend-to-RAM (ACP S3)
     to avoid confusing the platform firmware which started to happen
     after a core power management regression fix that went in during
     the 4.17 cycle (Rafael Wysocki).

   - Fix up the recently added support for devices in multiple power
     domains by avoiding to power up the entire domain unnecessarily
     when attaching a device to it (Ulf Hansson)"

* tag 'pm-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / Domains: Don't power on at attach for the multi PM domain case
  PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM

Merge tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux

Pull RISC-V fixes from Palmer Dabbelt:
 "This contains a handful of fixes for the RISC-V port:

   - A fix to R_RISCV_ADD32/R_RISCV_SUB32 relocations that allows
     modules that use these to load correctly.

   - The removal of of_platform_populate(), which is obselete.

   - The removal of irq-riscv-intc.h, which is obselete.

   - A fix to PTRACE_SETREGSET.

   - Fixes that allow the RV32I kernel to build (at least for Zong, I've
     got another patch on the mailing list that's necessary on my setup :)).

  I've just given these a defconfig build test"

* tag 'riscv-for-linus-4.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux:
  RISC-V: Fix PTRACE_SETREGSET bug.
  RISC-V: Don't include irq-riscv-intc.h
  riscv: remove unnecessary of_platform_populate call
  RISC-V: fix R_RISCV_ADD32/R_RISCV_SUB32 relocations
  RISC-V: Change variable type for 32-bit compatible
  RISC-V: Add definiion of extract symbol's index and type for 32-bit
  RISC-V: Select GENERIC_UCMPDI2 on RV32I
  RISC-V: Add conditional macro for zone of DMA32

Pull m68knommu fix from Greg Ungerer:
 "A single fix for breakage introduced in this merge window"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: fix "bad page state" oops on ColdFire boot

Merge ACPICA regression fix and a fix for the recently added PPTT
support.

* acpi-tables:
  ACPI / PPTT: use ACPI ID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set

* acpica:
  ACPICA: Drop leading newlines from error messages

Merge a PCI power management regression fix.

* pm-pci:
  PCI / ACPI / PM: Resume bridges w/o drivers on suspend-to-RAM

These patches for building 32-bit RISC-V kernel.
 - Fix the compile errors and warnings on RV32I.
 - Fix some incompatible problem on RV32I.
 - Add format.h for compatible of print format.

The fixed width integer types format for Elf_Addr will move to
generic header by another patch. For now, there are some warning
about unexpected argument of type on RV32I.

Change in v1:
 - Fix some error in v1
 - Remove implementation of fixed width integer types format for Elf_Addr.

In riscv_gpr_set, pass regs instead of &regs to user_regset_copyin to fix
gdb segfault.
Signed-off-by: NJim Wilson <jimw@sifive.com>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

This file has never existed in the upstream kernel, but it's guarded by
an #ifdef that's also never existed in the upstream kernel.  As a part
of our interrupt controller refactoring this header is no longer
necessary, but this reference managed to sneak in anyway.
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

The DT core will call of_platform_default_populate, so it is not
necessary for arch specific code to call it unless there are custom
match entries, auxdata or parent device. Neither of those apply here, so
remove the call.

Cc: Palmer Dabbelt <palmer@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: linux-riscv@lists.infradead.org
Signed-off-by: NRob Herring <robh@kernel.org>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

The R_RISCV_ADD32/R_RISCV_SUB32 relocations should add/subtract the
address of the symbol (without overflow check), not its contents.
Signed-off-by: NAndreas Schwab <schwab@suse.de>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

Signed-off-by: NZong Li <zong@andestech.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

Use generic marco to get the index and type of symbol.
Signed-off-by: NZong Li <zong@andestech.com>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

On 32-bit, it need to use __ucmpdi2, otherwise, it can't find the __ucmpdi2
symbol.
Signed-off-by: NZong Li <zong@andestech.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

The DMA32 is for 64-bit usage.
Signed-off-by: NZong Li <zong@andestech.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NPalmer Dabbelt <palmer@sifive.com>

A hooking API was implemented for 4.17 in fa93854f followed
by hooks for Thinkpad laptops in 2801b968. The Thinkpad
drivers did not support the Thinkpad 13 and the hooking API crashes
on unsupported batteries by altering a list of hooks during unsafe
iteration. Thus, Thinkpad 13 laptops could no longer boot.

Additionally, a lock was kept in place and debugging information was
printed out of order.

Fixes: fa93854f (battery: Add the battery hooking API)
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: NJouke Witteveen <j.witteveen@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If struct page is poisoned, and uninitialized access is detected via
PF_POISONED_CHECK(page) dump_page() is called to output the page.  But,
the dump_page() itself accesses struct page to determine how to print
it, and therefore gets into a recursive loop.

For example:

  dump_page()
   __dump_page()
    PageSlab(page)
     PF_POISONED_CHECK(page)
      VM_BUG_ON_PGFLAGS(PagePoisoned(page), page)
       dump_page() recursion loop.

Link: http://lkml.kernel.org/r/20180702180536.2552-1-pasha.tatashin@oracle.com
Fixes: f165b378 ("mm: uninitialized struct page poisoning sanity checking")
Signed-off-by: NPavel Tatashin <pasha.tatashin@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The ARM trusted foundations code is currently broken in linux-next when
CONFIG_KCOV_INSTRUMENT_ALL is set:

  /tmp/ccHdQsCI.s: Assembler messages:
  /tmp/ccHdQsCI.s:37: Error: .err encountered
  /tmp/ccHdQsCI.s:38: Error: .err encountered
  /tmp/ccHdQsCI.s:39: Error: .err encountered
  scripts/Makefile.build:311: recipe for target 'arch/arm/firmware/trusted_foundations.o' failed

I could not find a function attribute that lets me disable
-fsanitize-coverage=trace-pc for just one function, so this turns it off
for the entire file instead.

Link: http://lkml.kernel.org/r/20180529103636.1535457-1-arnd@arndb.de
Fixes: 75851720 ("arm: port KCOV to arm")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NOlof Johansson <olof@lixom.net>
Tested-by: NOlof Johansson <olof@lixom.net>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a special case that the size is "(N << KASAN_SHADOW_SCALE_SHIFT)
Pages plus X", the value of X is [1, KASAN_SHADOW_SCALE_SIZE-1].  The
operation "size >> KASAN_SHADOW_SCALE_SHIFT" will drop X, and the
roundup operation can not retrieve the missed one page.  For example:
size=0x28006, PAGE_SIZE=0x1000, KASAN_SHADOW_SCALE_SHIFT=3, we will get
shadow_size=0x5000, but actually we need 6 pages.

  shadow_size = round_up(size >> KASAN_SHADOW_SCALE_SHIFT, PAGE_SIZE);

This can lead to a kernel crash when kasan is enabled and the value of
mod->core_layout.size or mod->init_layout.size is like above.  Because
the shadow memory of X has not been allocated and mapped.

move_module:
  ptr = module_alloc(mod->core_layout.size);
  ...
  memset(ptr, 0, mod->core_layout.size);		//crashed

  Unable to handle kernel paging request at virtual address ffff0fffff97b000
  ......
  Call trace:
    __asan_storeN+0x174/0x1a8
    memset+0x24/0x48
    layout_and_allocate+0xcd8/0x1800
    load_module+0x190/0x23e8
    SyS_finit_module+0x148/0x180

Link: http://lkml.kernel.org/r/1529659626-12660-1-git-send-email-thunder.leizhen@huawei.comSigned-off-by: NZhen Lei <thunder.leizhen@huawei.com>
Reviewed-by: NDmitriy Vyukov <dvyukov@google.com>
Acked-by: NAndrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Libin <huawei.libin@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When booting with very large numbers of gigantic (i.e.  1G) pages, the
operations in the loop of gather_bootmem_prealloc, and specifically
prep_compound_gigantic_page, takes a very long time, and can cause a
softlockup if enough pages are requested at boot.

For example booting with 3844 1G pages requires prepping
(set_compound_head, init the count) over 1 billion 4K tail pages, which
takes considerable time.

Add a cond_resched() to the outer loop in gather_bootmem_prealloc() to
prevent this lockup.

Tested: Booted with softlockup_panic=1 hugepagesz=1G hugepages=3844 and
no softlockup is reported, and the hugepages are reported as
successfully setup.

Link: http://lkml.kernel.org/r/20180627214447.260804-1-cannonmatthews@google.comSigned-off-by: NCannon Matthews <cannonmatthews@google.com>
Reviewed-by: NAndrew Morton <akpm@linux-foundation.org>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Acked-by: NMichal Hocko <mhocko@suse.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: Greg Thelen <gthelen@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use huge_ptep_get() to translate huge ptes to normal ptes so we can
check them with the huge_pte_* functions.  Otherwise some architectures
will check the wrong values and will not wait for userspace to bring in
the memory.

Link: http://lkml.kernel.org/r/20180626132421.78084-1-frankja@linux.ibm.com
Fixes: 369cd212 ("userfaultfd: hugetlbfs: userfaultfd_huge_must_wait for hugepmd ranges")
Signed-off-by: NJanosch Frank <frankja@linux.ibm.com>
Reviewed-by: NDavid Hildenbrand <david@redhat.com>
Reviewed-by: NMike Kravetz <mike.kravetz@oracle.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

My networking merge (commit 4e33d7d4: "Pull networking fixes from
David Miller") got the poll() handling conflict wrong for af_smc.

The conflict between my a11e1d43 ("Revert changes to convert to
->poll_mask() and aio IOCB_CMD_POLL") and Ursula Braun's 24ac3a08
("net/smc: rebuild nonblocking connect") should have left the call to
sock_poll_wait() in place, just without the socket lock release/retake.

And I really should have realized that.  But happily, I at least asked
Ursula to double-check the merge, and she set me right.

This also fixes an incidental whitespace issue nearby that annoyed me
while looking at this.
Pointed-out-by: NUrsula Braun <ubraun@linux.ibm.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There are no legacy behavior in drivers to consider while attaching a
device to genpd - for the multiple PM domain case.

For that reason, let's instead require the driver to runtime resume the
device, via calling pm_runtime_get_sync() for example, when it needs to
power on the corresponding PM domain.

This allows us to improve the situation during attach. Instead of always
power on the PM domain, which may be unnecessary, let's leave it in its
current state. Additionally, to avoid the PM domain to stay powered on,
let's schedule a power off work.

Fixes: 3c095f32 (PM / Domains: Add support for multi PM domains ...)
Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently, we use the ACPI processor ID only for the leaf/processor nodes
as the specification states it must match the value of the ACPI processor
ID field in the processor’s entry in the MADT.

However, if a PPTT structure represents a processors group, it
matches a processor container UID in the namespace and the
ACPI_PPTT_ACPI_PROCESSOR_ID_VALID flag indicates whether the
ACPI processor ID is valid.

Let's use UID whenever ACPI_PPTT_ACPI_PROCESSOR_ID_VALID is set to be
consistent instead of using table offset as it's currently done for
non-leaf nodes.

Fixes: 2bd00bcd (ACPI/PPTT: Add Processor Properties Topology Table parsing)
Signed-off-by: NSudeep Holla <sudeep.holla@arm.com>
Acked-by: NJeremy Linton <jeremy.linton@arm.com>
[ rjw: Changelog (minor) ]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull MD fixes from Shaohua Li:
 "Two small fixes for MD:

   - an error handling fix from me

   - a recover bug fix for raid10 from BingJing"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/shli/md:
  md/raid10: fix that replacement cannot complete recovery after reassemble
  MD: cleanup resources in failure

Pull OpenRISC fixes from Stafford Horne:
 "Two fixes for issues which were breaking OpenRISC boot:

   - Fix bug in __pte_free_tlb() exposed in 4.18 by Matthew Wilcox's
     page table flag addition.

   - Fix issue booting on real hardware if delay slot detection
     emulation is disabled"

* tag 'for-linus' of git://github.com/stffrdhrn/linux:
  openrisc: entry: Fix delay slot exception detection
  openrisc: Call destructor during __pte_free_tlb

Pull networking fixes from David Miller:

 1) Verify netlink attributes properly in nf_queue, from Eric Dumazet.

 2) Need to bump memory lock rlimit for test_sockmap bpf test, from
    Yonghong Song.

 3) Fix VLAN handling in lan78xx driver, from Dave Stevenson.

 4) Fix uninitialized read in nf_log, from Jann Horn.

 5) Fix raw command length parsing in mlx5, from Alex Vesker.

 6) Cleanup loopback RDS connections upon netns deletion, from Sowmini
    Varadhan.

 7) Fix regressions in FIB rule matching during create, from Jason A.
    Donenfeld and Roopa Prabhu.

 8) Fix mpls ether type detection in nfp, from Pieter Jansen van Vuuren.

 9) More bpfilter build fixes/adjustments from Masahiro Yamada.

10) Fix XDP_{TX,REDIRECT} flushing in various drivers, from Jesper
    Dangaard Brouer.

11) fib_tests.sh file permissions were broken, from Shuah Khan.

12) Make sure BH/preemption is disabled in data path of mac80211, from
    Denis Kenzior.

13) Don't ignore nla_parse_nested() return values in nl80211, from
    Johannes berg.

14) Properly account sock objects ot kmemcg, from Shakeel Butt.

15) Adjustments to setting bpf program permissions to read-only, from
    Daniel Borkmann.

16) TCP Fast Open key endianness was broken, it always took on the host
    endiannness. Whoops. Explicitly make it little endian. From Yuching
    Cheng.

17) Fix prefix route setting for link local addresses in ipv6, from
    David Ahern.

18) Potential Spectre v1 in zatm driver, from Gustavo A. R. Silva.

19) Various bpf sockmap fixes, from John Fastabend.

20) Use after free for GRO with ESP, from Sabrina Dubroca.

21) Passing bogus flags to crypto_alloc_shash() in ipv6 SR code, from
    Eric Biggers.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (87 commits)
  qede: Adverstise software timestamp caps when PHC is not available.
  qed: Fix use of incorrect size in memcpy call.
  qed: Fix setting of incorrect eswitch mode.
  qed: Limit msix vectors in kdump kernel to the minimum required count.
  ipvlan: call dev_change_flags when ipvlan mode is reset
  ipv6: sr: fix passing wrong flags to crypto_alloc_shash()
  net: fix use-after-free in GRO with ESP
  tcp: prevent bogus FRTO undos with non-SACK flows
  bpf: sockhash, add release routine
  bpf: sockhash fix omitted bucket lock in sock_close
  bpf: sockmap, fix smap_list_map_remove when psock is in many maps
  bpf: sockmap, fix crash when ipv6 sock is added
  net: fib_rules: bring back rule_exists to match rule during add
  hv_netvsc: split sub-channel setup into async and sync
  net: use dev_change_tx_queue_len() for SIOCSIFTXQLEN
  atm: zatm: Fix potential Spectre v1
  s390/qeth: consistently re-enable device features
  s390/qeth: don't clobber buffer on async TX completion
  s390/qeth: avoid using is_multicast_ether_addr_64bits on (u8 *)[6]
  s390/qeth: fix race when setting MAC address
  ...

Sudarsana Reddy Kalluru says:

====================
qed*: Fix series.

The patch series addresses few issues in the qed* drivers.

Please consider applying it to 'net' branch.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When ptp clock is not available for a PF (e.g., higher PFs in NPAR mode),
get-tsinfo() callback should return the software timestamp capabilities
instead of returning the error.

Fixes: 4c55215c ("qede: Add driver support for PTP")
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the correct size value while copying chassis/port id values.

Fixes: 6ad8c632 ("qed: Add support for query/config dcbx.")
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

By default, driver sets the eswitch mode incorrectly as VEB (virtual
Ethernet bridging).
Need to set VEB eswitch mode only when sriov is enabled, and it should be
to set NONE by default. The patch incorporates this change.

Fixes: 0fefbfba ("qed*: Management firmware - notifications and defaults")
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Memory size is limited in the kdump kernel environment. Allocation of more
msix-vectors (or queues) consumes few tens of MBs of memory, which might
lead to the kdump kernel failure.
This patch adds changes to limit the number of MSI-X vectors in kdump
kernel to minimum required value (i.e., 2 per engine).

Fixes: fe56b9e6 ("qed: Add module with basic common support")
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@cavium.com>
Signed-off-by: NMichal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After we change the ipvlan mode from l3 to l2, or vice versa, we only
reset IFF_NOARP flag, but don't flush the ARP table cache, which will
cause eth->h_dest to be equal to eth->h_source in ipvlan_xmit_mode_l2().
Then the message will not come out of host.

Here is the reproducer on local host:

ip link set eth1 up
ip addr add 192.168.1.1/24 dev eth1
ip link add link eth1 ipvlan1 type ipvlan mode l3

ip netns add net1
ip link set ipvlan1 netns net1
ip netns exec net1 ip link set ipvlan1 up
ip netns exec net1 ip addr add 192.168.2.1/24 dev ipvlan1

ip route add 192.168.2.0/24 via 192.168.1.2
ping 192.168.2.2 -c 2

ip netns exec net1 ip link set ipvlan1 type ipvlan mode l2
ping 192.168.2.2 -c 2

Add the same configuration on remote host. After we set the mode to l2,
we could find that the src/dst MAC addresses are the same on eth1:

21:26:06.648565 00:b7:13:ad:d3:05 > 00:b7:13:ad:d3:05, ethertype IPv4 (0x0800), length 98: (tos 0x0, ttl 64, id 58356, offset 0, flags [DF], proto ICMP (1), length 84)
    192.168.2.1 > 192.168.2.2: ICMP echo request, id 22686, seq 1, length 64

Fix this by calling dev_change_flags(), which will call netdevice notifier
with flag change info.

v2:
a) As pointed out by Wang Cong, check return value for dev_change_flags() when
change dev flags.
b) As suggested by Stefano and Sabrina, move flags setting before l3mdev_ops.
So we don't need to redo ipvlan_{, un}register_nf_hook() again in err path.
Reported-by: NJianlin Shi <jishi@redhat.com>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Reviewed-by: NSabrina Dubroca <sd@queasysnail.net>
Fixes: 2ad7bf36 ("ipvlan: Initial check-in of the IPVLAN driver.")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The 'mask' argument to crypto_alloc_shash() uses the CRYPTO_ALG_* flags,
not 'gfp_t'.  So don't pass GFP_KERNEL to it.

Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support")
Signed-off-by: NEric Biggers <ebiggers@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since the addition of GRO for ESP, gro_receive can consume the skb and
return -EINPROGRESS. In that case, the lower layer GRO handler cannot
touch the skb anymore.

Commit 5f114163 ("net: Add a skb_gro_flush_final helper.") converted
some of the gro_receive handlers that can lead to ESP's gro_receive so
that they wouldn't access the skb when -EINPROGRESS is returned, but
missed other spots, mainly in tunneling protocols.

This patch finishes the conversion to using skb_gro_flush_final(), and
adds a new helper, skb_gro_flush_final_remcsum(), used in VXLAN and
GUE.

Fixes: 5f114163 ("net: Add a skb_gro_flush_final helper.")
Signed-off-by: NSabrina Dubroca <sd@queasysnail.net>
Reviewed-by: NStefano Brivio <sbrivio@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Booting a ColdFire m68k core with MMU enabled causes a "bad page state"
oops since commit 1d40a5ea ("mm: mark pages in use for page tables"):

 BUG: Bad page state in process sh  pfn:01ce2
 page:004fefc8 count:0 mapcount:-1024 mapping:00000000 index:0x0
 flags: 0x0()
 raw: 00000000 00000000 00000000 fffffbff 00000000 00000100 00000200 00000000
 raw: 039c4000
 page dumped because: nonzero mapcount
 Modules linked in:
 CPU: 0 PID: 22 Comm: sh Not tainted 4.17.0-07461-g1d40a5ea #13

Fix by calling pgtable_page_dtor() in our __pte_free_tlb() code path,
so that the PG_table flag is cleared before we free the pte page.

Note that I had to change the type of pte_free() to be static from
extern. Otherwise you get a lot of warnings like this:

./arch/m68k/include/asm/mcf_pgalloc.h:80:2: warning: ‘pgtable_page_dtor’ is static but used in inline function ‘pte_free’ which is not static
  pgtable_page_dtor(page);
  ^

And making it static is consistent with our use of this in the other
m68k pgalloc definitions of pte_free().
Signed-off-by: NGreg Ungerer <gerg@linux-m68k.org>
CC: Matthew Wilcox <willy@infradead.org>
Reviewed-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Pull btrfs fixes from David Sterba:
 "We have a few regression fixes for qgroup rescan status tracking and
  the vm_fault_t conversion that mixed up the error values"

* tag 'for-4.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  Btrfs: fix mount failure when qgroup rescan is in progress
  Btrfs: fix regression in btrfs_page_mkwrite() from vm_fault_t conversion
  btrfs: quota: Set rescan progress to (u64)-1 if we hit last leaf

Pull vfs fix from Al Viro:
 "Followup to procfs-seq_file series this window"

This fixes a memory leak by making sure that proc seq files release any
private data on close.  The 'proc_seq_open' has to be properly paired
with 'proc_seq_release' that releases the extra private data.

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  proc: add proc_seq_release