- 05 9月, 2014 6 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Al Viro 提交于
Currently udf_iget() (triggered by NFS) can race with udf_new_inode() leading to two inode structures with the same inode number: nfsd: iget_locked() creates inode nfsd: try to read from disk, block on that. udf_new_inode(): allocate inode with that inumber udf_new_inode(): insert it into icache, set it up and dirty udf_write_inode(): write inode into buffer cache nfsd: get CPU again, look into buffer cache, see nice and sane on-disk inode, set the in-core inode from it Fix the problem by putting inode into icache in locked state (I_NEW set) and unlocking it only after it's fully set up. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Al Viro 提交于
boilerplate code in udf_{create,mknod,symlink} taken to new helper symlink case converted to unique id calculated by udf_new_inode() - no point finding a new one. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Currently UDF doesn't initialize i_generation in any way and thus NFS can easily get reallocated inodes from stale file handles. Luckily UDF already has a unique object identifier associated with each inode - i_unique. Use that for initialization of i_generation. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
NFS can easily ask for inodes that are already deleted. Currently UDF happily returns such inodes which is a bug. Return -ESTALE if udf_read_inode() is asked to read deleted inode. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Currently __udf_read_inode() wasn't returning anything and we found out whether we succeeded reading inode by checking whether inode is bad or not. udf_iget() returned NULL on failure and inode pointer otherwise. Make these two functions properly propagate errors up the call stack and use the return value in callers. Signed-off-by: NJan Kara <jack@suse.cz>
-
- 04 9月, 2014 3 次提交
-
-
由 Jan Kara 提交于
We did not implement any bound on number of indirect ICBs we follow when loading inode. Thus corrupted medium could cause kernel to go into an infinite loop, possibly causing a stack overflow. Fix the possible stack overflow by removing recursion from __udf_read_inode() and limit number of indirect ICBs we follow to avoid infinite loops. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
There's no good reason to separate these since udf_fill_inode() is called only from __udf_read_inode() and both do part of the same thing. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
If we are writing back inode of unlinked directory, its link count ends up being (u16)-1. Although the inode is deleted, udf_iget() can load the inode when NFS uses stale file handle and get confused. Signed-off-by: NJan Kara <jack@suse.cz>
-
- 20 8月, 2014 1 次提交
-
-
由 Chao Yu 提交于
We have released the ->i_data_sem before invoking udf_add_entry(), so in following error path, we should not release this lock again. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 16 7月, 2014 3 次提交
-
-
由 Chao Yu 提交于
Valid data within i_size in page cache will be copied to ICB cache when we writeback the page by invoking udf_adinicb_writepage, so the copy in udf_adinicb_write_end is redundant. After we remove the copy, it's better to use simple_write_end directly in udf_adinicb_aops instead of udf_adinicb_write_end. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Andy Shevchenko 提交于
This patch cleans up udf_translate_to_linux() a bit by using globally defined macros instead of custom code. We can use sprintf(buf, "%04X", ...) there as well, but this one faster. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Fabian Frederick 提交于
Fix checkpatch warning WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h> Cc: Jan Kara <jack@suse.cz> Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 07 5月, 2014 5 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
all callers have iov_length(iter->iov, iter->nr_segs) == iov_iter_count(iter) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
unmodified, for now Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 04 4月, 2014 1 次提交
-
-
由 Johannes Weiner 提交于
Reclaim will be leaving shadow entries in the page cache radix tree upon evicting the real page. As those pages are found from the LRU, an iput() can lead to the inode being freed concurrently. At this point, reclaim must no longer install shadow pages because the inode freeing code needs to ensure the page tree is really empty. Add an address_space flag, AS_EXITING, that the inode freeing code sets under the tree lock before doing the final truncate. Reclaim will check for this flag before installing shadow pages. Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org> Reviewed-by: NRik van Riel <riel@redhat.com> Reviewed-by: NMinchan Kim <minchan@kernel.org> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Bob Liu <bob.liu@oracle.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Dave Chinner <david@fromorbit.com> Cc: Greg Thelen <gthelen@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Luigi Semenzato <semenzato@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Metin Doslu <metin@citusdata.com> Cc: Michel Lespinasse <walken@google.com> Cc: Ozgun Erdogan <ozgun@citusdata.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <klamm@yandex-team.ru> Cc: Ryan Mallon <rmallon@gmail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Vlastimil Babka <vbabka@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 02 4月, 2014 1 次提交
-
-
由 Al Viro 提交于
It's always equal to &iocb->ki_pos, where iocb is the value of the 1st argument. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 13 3月, 2014 1 次提交
-
-
由 Theodore Ts'o 提交于
Previously, the no-op "mount -o mount /dev/xxx" operation when the file system is already mounted read-write causes an implied, unconditional syncfs(). This seems pretty stupid, and it's certainly documented or guaraunteed to do this, nor is it particularly useful, except in the case where the file system was mounted rw and is getting remounted read-only. However, it's possible that there might be some file systems that are actually depending on this behavior. In most file systems, it's probably fine to only call sync_filesystem() when transitioning from read-write to read-only, and there are some file systems where this is not needed at all (for example, for a pseudo-filesystem or something like romfs). Signed-off-by: N"Theodore Ts'o" <tytso@mit.edu> Cc: linux-fsdevel@vger.kernel.org Cc: Christoph Hellwig <hch@infradead.org> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Evgeniy Dushistov <dushistov@mail.ru> Cc: Jan Kara <jack@suse.cz> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Cc: Anders Larsen <al@alarsen.net> Cc: Phillip Lougher <phillip@squashfs.org.uk> Cc: Kees Cook <keescook@chromium.org> Cc: Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz> Cc: Petr Vandrovec <petr@vandrovec.name> Cc: xfs@oss.sgi.com Cc: linux-btrfs@vger.kernel.org Cc: linux-cifs@vger.kernel.org Cc: samba-technical@lists.samba.org Cc: codalist@coda.cs.cmu.edu Cc: linux-ext4@vger.kernel.org Cc: linux-f2fs-devel@lists.sourceforge.net Cc: fuse-devel@lists.sourceforge.net Cc: cluster-devel@redhat.com Cc: linux-mtd@lists.infradead.org Cc: jfs-discussion@lists.sourceforge.net Cc: linux-nfs@vger.kernel.org Cc: linux-nilfs@vger.kernel.org Cc: linux-ntfs-dev@lists.sourceforge.net Cc: ocfs2-devel@oss.oracle.com Cc: reiserfs-devel@vger.kernel.org
-
- 03 3月, 2014 2 次提交
-
-
由 Fabian Frederick 提交于
init_inodecache is only called by __init init_udf_fs. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Fabian Frederick 提交于
Both affs and isofs check for blocksize integrity during parse_options.Do the same thing for udf. Valid values : 512, 1024, 2048 or 4096 bytes. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 21 2月, 2014 1 次提交
-
-
由 Jan Kara 提交于
UDF has two types of files - files with data stored in inode (ICB in UDF terminology) and files with data stored in external data blocks. We convert file from in-inode format to external format in udf_file_aio_write() when we find out data won't fit into inode any longer. However the following race between two O_APPEND writes can happen: CPU1 CPU2 udf_file_aio_write() udf_file_aio_write() down_write(&iinfo->i_data_sem); checks that i_size + count1 fits within inode => no need to convert up_write(&iinfo->i_data_sem); down_write(&iinfo->i_data_sem); checks that i_size + count2 fits within inode => no need to convert up_write(&iinfo->i_data_sem); generic_file_aio_write() - extends file by count1 bytes generic_file_aio_write() - extends file by count2 bytes Clearly if count1 + count2 doesn't fit into the inode, we overwrite kernel buffers beyond inode, possibly corrupting the filesystem as well. Fix the problem by acquiring i_mutex before checking whether write fits into the inode and using __generic_file_aio_write() afterwards which puts check and write into one critical section. Reported-by: NAl Viro <viro@ZenIV.linux.org.uk> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 24 12月, 2013 1 次提交
-
-
由 Jan Kara 提交于
Lockdep is complaining about UDF: ============================================= [ INFO: possible recursive locking detected ] 3.12.0+ #16 Not tainted --------------------------------------------- ln/7386 is trying to acquire lock: (&ei->i_data_sem){+.+...}, at: [<ffffffff8142f06d>] udf_get_block+0x8d/0x130 but task is already holding lock: (&ei->i_data_sem){+.+...}, at: [<ffffffff81431a8d>] udf_symlink+0x8d/0x690 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&ei->i_data_sem); lock(&ei->i_data_sem); *** DEADLOCK *** This is because we hold i_data_sem of the symlink inode while calling udf_add_entry() for the directory. I don't think this can ever lead to deadlocks since we never hold i_data_sem for two inodes in any other place. The fix is simple - move unlock of i_data_sem for symlink inode up. We don't need it for anything when linking symlink inode to directory. Reported-by: NChristoph Hellwig <hch@infradead.org> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 19 10月, 2013 1 次提交
-
-
由 Peter A. Felvegi 提交于
The UDF driver was not strict enough about checking the IDs in the VSDs when mounting, which resulted in reading through all the sectors of the block device in some unfortunate cases. Eg, trying to mount my uninitialized 200G SSD partition (all 0xFF bytes) took ~350 minutes to fail, because the code expected some of the valid IDs or a zero byte. During this, the mount couldn't be killed, sync from the cmdline blocked, and the machine froze into the shutdown. Valid filesystems (extX, btrfs, ntfs) were rejected by the mere accident of having a zero byte at just the right place in some of their sectors, close enough to the beginning not to generate excess I/O. The fix adds a hard limit on the VSD sector offset, adds the two missing VSD IDs, and stops scanning when encountering an invalid ID. Also replaced the magic number 32768 with a more meaningful #define, and supressed the bogus message about failing to read the first sector if no UDF fs was detected. Signed-off-by: NPeter A. Felvegi <petschy@gmail.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 24 9月, 2013 1 次提交
-
-
由 Jan Kara 提交于
A user has reported an oops in udf_statfs() that was caused by numOfPartitions entry in LVID structure being corrupted. Fix the problem by verifying whether numOfPartitions makes sense at least to the extent that LVID fits into a single block as it should. Reported-by: NJuergen Weigert <jw@suse.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
- 13 9月, 2013 1 次提交
-
-
由 Kirill A. Shutemov 提交于
truncate_pagecache() doesn't care about old size since commit cedabed4 ("vfs: Fix vmtruncate() regression"). Let's drop it. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 01 8月, 2013 2 次提交
-
-
由 Jan Kara 提交于
Refuse RW mount of udf filesystem. So far we just silently changed it to RO mount but when the media is writeable, block layer won't notice this change and thus will think device is used RW and will block eject button of the drive. That is unexpected by users because for non-writeable media eject button works just fine. Userspace mount(8) command handles this just fine and retries mounting with MS_RDONLY set so userspace shouldn't see any regression. Plus any tool mounting udf is likely confronted with the case of read-only media where block layer already refuses to mount the filesystem without MS_RDONLY set so our behavior shouldn't be anything new for it. Reported-by: NHui Wang <hui.wang@canonical.com> Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
Change all function used in filesystem discovery during mount to user standard kernel return values - -errno on error, 0 on success instead of 1 on failure and 0 on success. This allows us to pass error number (not just failure / success) so we can abort device scanning earlier in case of errors like EIO or ENOMEM . Also we will be able to return EROFS in case writeable mount is requested but writing isn't supported. Signed-off-by: NJan Kara <jack@suse.cz>
-
- 30 7月, 2013 1 次提交
-
-
由 Kent Overstreet 提交于
This code doesn't serve any purpose anymore, since the aio retry infrastructure has been removed. This change should be safe because aio_read/write are also used for synchronous IO, and called from do_sync_read()/do_sync_write() - and there's no looping done in the sync case (the read and write syscalls). Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Signed-off-by: NBenjamin LaHaise <bcrl@kvack.org>
-
- 29 6月, 2013 2 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 08 5月, 2013 1 次提交
-
-
由 Kent Overstreet 提交于
Faster kernel compiles by way of fewer unnecessary includes. [akpm@linux-foundation.org: fix fallout] [akpm@linux-foundation.org: fix build] Signed-off-by: NKent Overstreet <koverstreet@google.com> Cc: Zach Brown <zab@redhat.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jens Axboe <axboe@kernel.dk> Cc: Asai Thambi S P <asamymuthupa@micron.com> Cc: Selvan Mani <smani@micron.com> Cc: Sam Bradshaw <sbradshaw@micron.com> Cc: Jeff Moyer <jmoyer@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Benjamin LaHaise <bcrl@kvack.org> Reviewed-by: N"Theodore Ts'o" <tytso@mit.edu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 3月, 2013 1 次提交
-
-
由 Eric W. Biederman 提交于
Somehow I failed to add the MODULE_ALIAS_FS for cifs, hostfs, hpfs, squashfs, and udf despite what I thought were my careful checks :( Add them now. Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
-
- 26 2月, 2013 2 次提交
-
-
由 Zhao Hongjiang 提交于
According to SUSv3: [EACCES] Permission denied. An attempt was made to access a file in a way forbidden by its file access permissions. [EPERM] Operation not permitted. An attempt was made to perform an operation limited to processes with appropriate privileges or to the owner of a file or other resource. So -EPERM should be returned if capability checks fails. Strictly speaking this is an API change since the error code user sees is altered. Signed-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com> Acked-by: NJan Kara <jack@suse.cz> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Acked-by: NIan Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Namjae Jeon 提交于
This patch is a follow up on below patch: [PATCH] exportfs: add FILEID_INVALID to indicate invalid fid_type commit: 216b6cbdSigned-off-by: NNamjae Jeon <namjae.jeon@samsung.com> Signed-off-by: NVivek Trivedi <t.vivek@samsung.com> Acked-by: NSteven Whitehouse <swhiteho@redhat.com> Acked-by: NSage Weil <sage@inktank.com> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 23 2月, 2013 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 06 2月, 2013 2 次提交
-
-
由 Jan Kara 提交于
s_extLength was assigned to but the value was never really used. So just remove the field. Signed-off-by: NJan Kara <jack@suse.cz>
-
由 Jan Kara 提交于
struct udf_bitmap has array of buffer pointers attached to it. The code unnecessarily used s_block_bitmap as a pointer to the array instead of the standard trick of using 0 length array in the declaration. Change that to make code more readable and actually shrink the structure by one pointer. Signed-off-by: NJan Kara <jack@suse.cz>
-