There is no need to save or restore hwmode field, because by
the time this function sets this field, it cannot fail any more.
However, we should save old enabled field because if
the function fails, we want to return with unchanged CRTC.
Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Old framebuffer is stored in save_set.fb and it is
the same value that is later stored in old_fb.
This makes old_fb redundant so we can replace
it with save_set.fb.
Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Replace the sparse array of booleans with a bitfield.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When a second process opens the device and master transferrence is
complete, we walk the list of open devices and remove their
authentication. This also revokes our root privilege. Instead of simply
dropping the authentication, this patch reverts the authenticated state
back to its original value.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This causes problems with never going busy due to ptherm polling,
and after talking to Ben I can't see it being required.
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm_connector_sysfs_add() explicitly checks if connector->kdev
is already populated and returns success. So it clearly now allows
being called multiple times. Remove some stale comments to the contrary.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Don't block forever if there is nothing to wait for.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Tested-by: NRafa? Mi?ecki <zajec5@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

qxl devices can have a 64bit surface bar, which is quite handy if
you need a bit more surface memory.  So try to use it if it is
present.  Note that this bar might be mapped above 4g.

QEMU command line to check that out:

    qemu-system-x86_64 -m 4g \
        -vga qxl -global qxl-vga.vram64_size_mb=512 \
        $otheroptions
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Explicitly set 1024x768 as default mode, so the display doesn't come up
with the largest supported mode.

While being at it drop first three drm_add_modes_noedid calls.  As
drm_add_modes_noedid fills the mode list with modes from the database
*up to* the specified size it is pretty pointless to call it multiple
times with different sizes.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

New helper function to set the preferred video mode.  Can be called
after drm_add_modes_noedid if you don't want the largest supported
video mode be used by default.
Signed-off-by: NGerd Hoffmann <kraxel@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

drm_fb_get_bpp_depth() likes to complain about unsupported pixel formats
but doesn't bother telling us what the format was. Also format_check()
just returns an error when it encouters an invalid format, leaving the
user scratching his head trying to figure out why addfb failed. Make
life a bit easier by using drm_get_format_name() in both places.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NDamien Lespiau <damien.lespiau@intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

I got very confused when I tried to compare the EST modes with the spec.
Bring over a comment from xf86EdidModes.c that actually describes some
of history where these things came from.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Also check the est3 modes whose presence is indicated by bit 0.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The correct refresh rate for this mode is 75, not 85.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Let's be a bit more consistent with our error values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Let's be a bit more consistent with our error values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Let's be a bit more consistent with our error values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Let's be a bit more consistent with our error values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Let's be a bit more consistent with our error values.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Return -ENOENT for framebuffers like we do for other mode objects that
can't be found.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We tend to return -EINVAL for everything. Let's try to help poor
userland developers a bit by at least returning -ENONET for missing
objects.
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Most architectures define virt_to_page() as a macro that casts its
argument such that an argument of type unsigned long will be accepted
without complaint.  However, the proper type is void *, and passing
unsigned long results in a warning on MIPS.

Compile-tested only.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

By definition, the page offset will not affect the result.

Compile-tested only.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDave Airlie <airlied@redhat.com>

When there are unconsumed pending events, the events are
destroyed by calling destroy callback, but the events list
are remained, because there is no list_del().

It is possible that the page flip request is handled after
drm_events_release() is called and before drm_fb_release().
In this case a drm_pending_event is remained not freed.
So exynos driver checks again to remove it in its post
close routine. But the file_priv->event_list contains
undeleted ones, this can make oops for accessing invalid
memory.
Signed-off-by: NYoungJun Cho <yj44.cho@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Those structures are not used anywhere.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Those functions are just reading data from those pointers.
Signed-off-by: NDamien Lespiau <damien.lespiau@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This removes an open coded simple_open() function and replaces file
operations references to the function with simple_open() instead.
Signed-off-by: NDuan Jiong <duanj.fnst@cn.fujitsu.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The driver registers a backlight device and thus requires
BACKLIGHT_CLASS_DEVICE to be selected to avoid compilation breakages.

Cc: stable@vger.kernel.org
Reported-by: NRussell King <linux@arm.linux.org.uk>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move the ktime_get() clock readouts and potential preempt_disable()
calls from drm core into kms driver to make it compatible with the
api changes in the drm core.

The intel-kms driver needs to take the uncore.lock inside
i915_get_crtc_scanoutpos() and intel_pipe_in_vblank().
This is incompatible with the preempt_disable() on a
PREEMPT_RT patched kernel, as regular spin locks must not
be taken within a preempt_disable'd section. Lock contention
on the uncore.lock also introduced too much uncertainty in vblank
timestamps.

Push the ktime_get() timestamping for scanoutpos queries and
potential preempt_disable_rt() into i915_get_crtc_scanoutpos(),
so these problems can be avoided:

1. First lock the uncore.lock (might sleep on a PREEMPT_RT kernel).
2. preempt_disable_rt() (will be added by the rt-linux folks).
3. ktime_get() a timestamp before scanout pos query.
4. Do all mmio reads as fast as possible without grabbing any new locks!
5. ktime_get() a post-query timestamp.
6. preempt_enable_rt()
7. Unlock the uncore.lock.

This reduces timestamp uncertainty on a low-end HP Atom Mini netbook
with Intel GMA-950 nicely:

Before: 3-8 usecs with spikes > 20 usecs, triggering query retries.
After : Typically 1 usec (98% of all samples), occassionally 2 usecs
        (2% of all samples), with maximum of 3 usecs (a handful).

v2: Fix formatting of new multi-line code comments.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Move the ktime_get() clock readouts and potential preempt_disable()
calls from drm core into kms driver to make it compatible with the
api changes in the drm core.

This should not introduce any change in functionality or behaviour
in radeon-kms, just a reshuffling of code.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

A change in locking of some kms drivers (currently intel-kms) make
the old approach too inaccurate and also incompatible with the
PREEMPT_RT realtime kernel patchset.

The driver->get_scanout_position() method of intel-kms now needs
to aquire a spinlock, which clashes badly with the former
preempt_disable() calls in the drm, and it also introduces larger
delays and timing uncertainty on a contended lock than acceptable.

This patch changes the prototype of driver->get_scanout_position()
to require/allow kms drivers to perform the ktime_get() system time
queries which go along with actual scanout position readout in a way
that provides maximum precision and to return those timestamps to
the drm. kms drivers implementations of get_scanout_position() are
asked to implement timestamping and scanoutpos readout in a way
that is as precise as possible and compatible with preempt_disable()
on a PREMPT_RT kernel. A driver should follow this pattern in
get_scanout_position() for precision and compatibility:

spin_lock...(...);
preempt_disable_rt(); // On a PREEMPT_RT kernel, otherwise omit.
if (stime) *stime = ktime_get();
... Minimum amount of MMIO register reads to get scanout position ...
... no taking of locks allowed here! ...
if (etime) *etime = ktime_get();
preempt_enable_rt(); // On PREEMPT_RT kernel, otherwise omit.
spin_unlock...(...);

v2: Fix formatting of new multi-line code comments.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Preemption handling will get pushed into the kms
drivers in followup patches, to make timestamping
more robust and PREEMPT_RT friendly.
Signed-off-by: NMario Kleiner <mario.kleiner.de@gmail.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Initial pull request for radeon drm-next 3.13.  Highlights:
- Enable DPM on a number of asics by default
- Enable audio by default
- Dynamically power down dGPUs on PowerXpress systems
- Lots of bug fixes
* 'drm-next-3.13' of git://people.freedesktop.org/~agd5f/linux: (36 commits)
  drm/radeon: don't share PPLLs on DCE4.1
  drm/radeon/dpm: fix typo in setting smc flag
  drm/radeon: fixup locking inversion between, mmap_sem and reservations
  drm/radeon: clear the page directory using the DMA
  drm/radeon: initially clear page tables
  drm/radeon: drop CP page table updates & cleanup v2
  drm/radeon: add vm_set_page tracepoint
  drm/radeon: rework and fix reset detection v2
  drm/radeon: don't use PACKET2 on CIK
  drm/radeon: fix UVD destroy IB size
  drm/radeon: activate UVD clocks before sending the destroy msg
  drm/radeon/si: fix define for MC_SEQ_TRAIN_WAKEUP_CNTL
  drm/radeon: fix endian handling in rlc buffer setup
  drm/radeon/dpm: retain user selected performance level across state changes
  drm/radeon: disable force performance state when thermal state is active
  drm/radeon: enable DPM by default on r7xx asics
  drm/radeon: enable DPM by default on evergreen asics
  drm/radeon: enable DPM by default on BTC asics
  drm/radeon: enable DPM by default on SI asics
  drm/radeon: enable DPM by default on SUMO/PALM APUs
  ...

drm/tegra: Changes for v3.13-rc1

The biggest part of the changes is the decoupling of the host1x and DRM
drivers followed by the move of Tegra DRM back to drivers/gpu/drm/tegra
from whence it came. There is a lot of cleanup as well, and the drivers
can now be properly unloaded and reloaded.

HDMI support for the Tegra114 SoC was contributed by Mikko Perttunen.

gr2d support was extended to Tegra114 and the gr3d driver that has been
in the works for quite some time finally made it in. All pieces to run
an OpenGL driver on top of an upstream kernel are now available.

Support for syncpoint bases was added by Arto Merilainen. This is useful
for synchronizing between command streams from different engines such as
gr2d and gr3d.

Erik Faye-Lund and Wei Yongjun contributed various small fixes. Thanks!

* tag 'drm/for-3.13-rc1' of git://anongit.freedesktop.org/tegra/linux: (45 commits)
  drm/tegra: Reserve syncpoint base for gr3d
  drm/tegra: Reserve base for gr2d
  drm/tegra: Deliver syncpoint base to user space
  gpu: host1x: Add syncpoint base support
  gpu: host1x: Add 'flags' field to syncpt request
  drm/tegra: Disable clock on probe failure
  gpu: host1x: Disable clock on probe failure
  drm/tegra: Support bottom-up buffer objects
  drm/tegra: Add support for tiled buffer objects
  drm/tegra: Add 3D support
  drm/tegra: Introduce tegra_drm_submit()
  drm/tegra: Use symbolic names for gr2d registers
  drm/tegra: Start connectors with correct DPMS mode
  drm/tegra: hdmi: Enable VDD earlier for hotplug/DDC
  drm/tegra: hdmi: Fix build warnings
  drm/tegra: hdmi: Detect DVI-only displays
  drm/tegra: Add Tegra114 HDMI support
  drm/tegra: hdmi: Parameterize based on compatible property
  drm/tegra: hdmi: Rename tegra{2,3} to tegra{20,30}
  gpu: host1x: Add support for Tegra114
  ...

If we are using deferred io due to plymouth or X.org fbdev driver
we will oops in memcpy due to this pointless multiply here,

removing it fixes fbdev to start and not oops.

Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>