- 17 2月, 2014 8 次提交
-
-
由 Benjamin Tissoires 提交于
Add a helper to access hdev->hid_output_raw_report(). To convert the drivers, use the following snippets: for i in drivers/hid/*.c do sed -i.bak "s/[^ \t]*->hid_output_raw_report(/hid_output_raw_report(/g" $i done Then manually fix for checkpatch.pl Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
dev->hid_get_raw_report(X) and hid_hw_raw_request(X, HID_REQ_GET_REPORT) are strictly equivalent. Switch the hid subsystem to the hid_hw notation and remove the field .hid_get_raw_report in struct hid_device. Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
Well, no use to keep twice the same code. Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
- Move hidp_output_report() above - Removed duplicated code in hidp_output_raw_report() Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
All the different transport drivers use now the generic event handling in hid-input. We can remove the handler definitively now. Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
hidp uses its own ->hidinput_input_event() instead of the generic binding in hid-input. Moving the handling of LEDs towards hidp_hidinput_event() allows two things: - remove hidinput_input_event definitively from struct hid_device - hidraw user space programs can also set the LEDs Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
hid-logitech-dj uses its own ->hidinput_input_event() instead of the generic binding in hid-input. Moving the handling of LEDs towards logi_dj_output_hidraw_report() allows two things: - remove hidinput_input_event in struct hid_device - hidraw user space programs can also set the LEDs Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Benjamin Tissoires 提交于
Those callbacks are not mandatory, so it's better to add inliners to use them safely. Reviewed-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 29 1月, 2014 4 次提交
-
-
由 Frank Praznik 提交于
Add raw_request, set_raw_report and output_report transport-driver functions to the HIDP driver. Signed-off-by: NFrank Praznik <frank.praznik@oh.rr.com> Acked-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Frank Praznik 提交于
Add the uhid_output_report transport-driver function to the uhid driver. Signed-off-by: NFrank Praznik <frank.praznik@oh.rr.com> Acked-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Frank Praznik 提交于
Add raw_request, set_raw_report and output_report transport-driver functions to the USB HID driver. Signed-off-by: NFrank Praznik <frank.praznik@oh.rr.com> Acked-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
由 Frank Praznik 提交于
Add raw_request and output_report callbacks to the hid_ll_driver struct. Signed-off-by: NFrank Praznik <frank.praznik@oh.rr.com> Acked-by: NDavid Herrmann <dh.herrmann@gmail.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 23 1月, 2014 6 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid由 Linus Torvalds 提交于
Pull HID updates from Jiri Kosina: - quite some work on hid-sony driver in order to have DualShock 4 device properly supported, from Frank Praznik - fixed support for suspending I2C conntected devices, from Mika Westerberg - regression fix for 0xff05 usage on Microsoft Ergonomy, from Jiri Kosina - support for Synaptics HD touchscreen, from AceLan Kao - workaround for USB 3.0 problem for logitech-dj connected devices, from Benjamin Tisssoires - support for Logitech Dual Action pads, from Vitaly Katraew - quite a few other assorted fixes and device ID additions * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (33 commits) HID: sony: Use colors for the Dualshock 4 LED names HID: sony: Add annotated HID descriptor for the Dualshock 4 HID: sony: Cache the output report for the Dualshock 4 HID: sony: Map gyroscopes and accelerometers to axes HID: sony: Fix spacing in the device definitions. HID: sony: Use standard output reports instead of raw reports to send data to the Dualshock 4. HID: sony: Use separate identifiers for USB and Bluetooth connected Dualshock 4 controllers. HID: hid-holtek-mouse: add new a070 mouse HID: hid-sensor-hub: Fix buggy report descriptors HID: logitech-dj: Fix USB 3.0 issue HID: sony: Rename worker function HID: sony: Add LED controls for the Dualshock 4 HID: sony: Add force-feedback support for the Dualshock 4 HID: hidraw: make comment more accurate and nicer HID: sony: fix error return code HID: input: fix input sysfs path for hid devices HID: debug: add labels for some new buttons HID: remove SIS entries from hid_have_special_driver[] HID: microsoft: no fallthrough in MS ergonomy 0xff05 usage HID: add support for SiS multitouch panel in the touch monitor LG 23ET83V ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm由 Linus Torvalds 提交于
Pull device-mapper changes from Mike Snitzer: "A lot of attention was paid to improving the thin-provisioning target's handling of metadata operation failures and running out of space. A new 'error_if_no_space' feature was added to allow users to error IOs rather than queue them when either the data or metadata space is exhausted. Additional fixes/features include: - a few fixes to properly support thin metadata device resizing - a solution for reliably waiting for a DM device's embedded kobject to be released before destroying the device - old dm-snapshot is updated to use the dm-bufio interface to take advantage of readahead capabilities that improve snapshot activation - new dm-cache target tunables to control how quickly data is promoted to the cache (fast) device - improved write efficiency of cluster mirror target by combining userspace flush and mark requests" * tag 'dm-3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (35 commits) dm log userspace: allow mark requests to piggyback on flush requests dm space map metadata: fix bug in resizing of thin metadata dm cache: add policy name to status output dm thin: fix pool feature parsing dm sysfs: fix a module unload race dm snapshot: use dm-bufio prefetch dm snapshot: use dm-bufio dm snapshot: prepare for switch to using dm-bufio dm snapshot: use GFP_KERNEL when initializing exceptions dm cache: add block sizes and total cache blocks to status output dm btree: add dm_btree_find_lowest_key dm space map metadata: fix extending the space map dm space map common: make sure new space is used during extend dm: wait until embedded kobject is released before destroying a device dm: remove pointless kobject comparison in dm_get_from_kobject dm snapshot: call destroy_work_on_stack() to pair with INIT_WORK_ONSTACK() dm cache policy mq: introduce three promotion threshold tunables dm cache policy mq: use list_del_init instead of list_del + INIT_LIST_HEAD dm thin: fix set_pool_mode exposed pool operation races dm thin: eliminate the no_free_space flag ... -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi由 Linus Torvalds 提交于
Pull SCSI updates from James Bottomley: "This patch set is a lot of driver updates for qla4xxx, bfa, hpsa, qla2xxx. It also removes the aic7xxx_old driver (which has been deprecated for nearly a decade) and adds support for deadlines in error handling" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (75 commits) [SCSI] hpsa: allow SCSI mid layer to handle unit attention [SCSI] hpsa: do not require board "not ready" status after hard reset [SCSI] hpsa: enable unit attention reporting [SCSI] hpsa: rename scsi prefetch field [SCSI] hpsa: use workqueue instead of kernel thread for lockup detection [SCSI] ipr: increase dump size in ipr driver [SCSI] mac_scsi: Fix crash on out of memory [SCSI] st: fix enlarge_buffer [SCSI] qla1280: Annotate timer on stack so object debug does not complain [SCSI] qla4xxx: Update driver version to 5.04.00-k3 [SCSI] qla4xxx: Recreate chap data list during get chap operation [SCSI] qla4xxx: Add support for ISCSI_PARAM_LOCAL_IPADDR sysfs attr [SCSI] libiscsi: Add local_ipaddr parameter in iscsi_conn struct [SCSI] scsi_transport_iscsi: Export ISCSI_PARAM_LOCAL_IPADDR attr for iscsi_connection [SCSI] qla4xxx: Add host statistics support [SCSI] scsi_transport_iscsi: Add host statistics support [SCSI] qla4xxx: Added support for Diagnostics MBOX command [SCSI] bfa: Driver version upgrade to 3.2.23.0 [SCSI] bfa: change FC_ELS_TOV to 20sec [SCSI] bfa: Observed auto D-port mode instead of manual ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci由 Linus Torvalds 提交于
Pull PCI updates from Bjorn Helgaas: "PCI changes for the v3.14 merge window: Resource management - Change pci_bus_region addresses to dma_addr_t (Bjorn Helgaas) - Support 64-bit AGP BARs (Bjorn Helgaas, Yinghai Lu) - Add pci_bus_address() to get bus address of a BAR (Bjorn Helgaas) - Use pci_resource_start() for CPU address of AGP BARs (Bjorn Helgaas) - Enforce bus address limits in resource allocation (Yinghai Lu) - Allocate 64-bit BARs above 4G when possible (Yinghai Lu) - Convert pcibios_resource_to_bus() to take pci_bus, not pci_dev (Yinghai Lu) PCI device hotplug - Major rescan/remove locking update (Rafael J. Wysocki) - Make ioapic builtin only (not modular) (Yinghai Lu) - Fix release/free issues (Yinghai Lu) - Clean up pciehp (Bjorn Helgaas) - Announce pciehp slot info during enumeration (Bjorn Helgaas) MSI - Add pci_msi_vec_count(), pci_msix_vec_count() (Alexander Gordeev) - Add pci_enable_msi_range(), pci_enable_msix_range() (Alexander Gordeev) - Deprecate "tri-state" interfaces: fail/success/fail+info (Alexander Gordeev) - Export MSI mode using attributes, not kobjects (Greg Kroah-Hartman) - Drop "irq" param from *_restore_msi_irqs() (DuanZhenzhong) SR-IOV - Clear NumVFs when disabling SR-IOV in sriov_init() (ethan.zhao) Virtualization - Add support for save/restore of extended capabilities (Alex Williamson) - Add Virtual Channel to save/restore support (Alex Williamson) - Never treat a VF as a multifunction device (Alex Williamson) - Add pci_try_reset_function(), et al (Alex Williamson) AER - Ignore non-PCIe error sources (Betty Dall) - Support ACPI HEST error sources for domains other than 0 (Betty Dall) - Consolidate HEST error source parsers (Bjorn Helgaas) - Add a TLP header print helper (Borislav Petkov) Freescale i.MX6 - Remove unnecessary code (Fabio Estevam) - Make reset-gpio optional (Marek Vasut) - Report "link up" only after link training completes (Marek Vasut) - Start link in Gen1 before negotiating for Gen2 mode (Marek Vasut) - Fix PCIe startup code (Richard Zhu) Marvell MVEBU - Remove duplicate of_clk_get_by_name() call (Andrew Lunn) - Drop writes to bridge Secondary Status register (Jason Gunthorpe) - Obey bridge PCI_COMMAND_MEM and PCI_COMMAND_IO bits (Jason Gunthorpe) - Support a bridge with no IO port window (Jason Gunthorpe) - Use max_t() instead of max(resource_size_t,) (Jingoo Han) - Remove redundant of_match_ptr (Sachin Kamat) - Call pci_ioremap_io() at startup instead of dynamically (Thomas Petazzoni) NVIDIA Tegra - Disable Gen2 for Tegra20 and Tegra30 (Eric Brower) Renesas R-Car - Add runtime PM support (Valentine Barshak) - Fix rcar_pci_probe() return value check (Wei Yongjun) Synopsys DesignWare - Fix crash in dw_msi_teardown_irq() (Bjørn Erik Nilsen) - Remove redundant call to pci_write_config_word() (Bjørn Erik Nilsen) - Fix missing MSI IRQs (Harro Haan) - Add dw_pcie prefix before cfg_read/write (Pratyush Anand) - Fix I/O transfers by using CPU (not realio) address (Pratyush Anand) - Whitespace cleanup (Jingoo Han) EISA - Call put_device() if device_register() fails (Levente Kurusa) - Revert EISA initialization breakage ((Bjorn Helgaas) Miscellaneous - Remove unused code, including PCIe 3.0 interfaces (Stephen Hemminger) - Prevent bus conflicts while checking for bridge apertures (Bjorn Helgaas) - Stop clearing bridge Secondary Status when setting up I/O aperture (Bjorn Helgaas) - Use dev_is_pci() to identify PCI devices (Yijing Wang) - Deprecate DEFINE_PCI_DEVICE_TABLE (Joe Perches) - Update documentation 00-INDEX (Erik Ekman)" * tag 'pci-v3.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (119 commits) Revert "EISA: Initialize device before its resources" Revert "EISA: Log device resources in dmesg" vfio-pci: Use pci "try" reset interface PCI: Check parent kobject in pci_destroy_dev() xen/pcifront: Use global PCI rescan-remove locking powerpc/eeh: Use global PCI rescan-remove locking PCI: Fix pci_check_and_unmask_intx() comment typos PCI: Add pci_try_reset_function(), pci_try_reset_slot(), pci_try_reset_bus() MPT / PCI: Use pci_stop_and_remove_bus_device_locked() platform / x86: Use global PCI rescan-remove locking PCI: hotplug: Use global PCI rescan-remove locking pcmcia: Use global PCI rescan-remove locking ACPI / hotplug / PCI: Use global PCI rescan-remove locking ACPI / PCI: Use global PCI rescan-remove locking in PCI root hotplug PCI: Add global pci_lock_rescan_remove() PCI: Cleanup pci.h whitespace PCI: Reorder so actual code comes before stubs PCI/AER: Support ACPI HEST AER error sources for PCI domains other than 0 ACPICA: Add helper macros to extract bus/segment numbers from HEST table. PCI: Make local functions static ... -
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace由 Linus Torvalds 提交于
Pull tracing updates from Steven Rostedt: "This pull request has a new feature to ftrace, namely the trace event triggers by Tom Zanussi. A trigger is a way to enable an action when an event is hit. The actions are: o trace on/off - enable or disable tracing o snapshot - save the current trace buffer in the snapshot o stacktrace - dump the current stack trace to the ringbuffer o enable/disable events - enable or disable another event Namhyung Kim added updates to the tracing uprobes code. Having the uprobes add support for fetch methods. The rest are various bug fixes with the new code, and minor ones for the old code" * tag 'trace-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: (38 commits) tracing: Fix buggered tee(2) on tracing_pipe tracing: Have trace buffer point back to trace_array ftrace: Fix synchronization location disabling and freeing ftrace_ops ftrace: Have function graph only trace based on global_ops filters ftrace: Synchronize setting function_trace_op with ftrace_trace_function tracing: Show available event triggers when no trigger is set tracing: Consolidate event trigger code tracing: Fix counter for traceon/off event triggers tracing: Remove double-underscore naming in syscall trigger invocations tracing/kprobes: Add trace event trigger invocations tracing/probes: Fix build break on !CONFIG_KPROBE_EVENT tracing/uprobes: Add @+file_offset fetch method uprobes: Allocate ->utask before handler_chain() for tracing handlers tracing/uprobes: Add support for full argument access methods tracing/uprobes: Fetch args before reserving a ring buffer tracing/uprobes: Pass 'is_return' to traceprobe_parse_probe_arg() tracing/probes: Implement 'memory' fetch method for uprobes tracing/probes: Add fetch{,_size} member into deref fetch method tracing/probes: Move 'symbol' fetch method to kprobes tracing/probes: Implement 'stack' fetch method for uprobes ...
-
由 James Bottomley 提交于
-
- 22 1月, 2014 22 次提交
-
-
由 Jiri Kosina 提交于
Merge branches 'for-3.13/upstream-fixes', 'for-3.14/i2c-hid', 'for-3.14/sensor-hub', 'for-3.14/sony' and 'for-3.14/upstream' into for-linus
-
由 Dongmao Zhang 提交于
In the cluster evironment, cluster write has poor performance because userspace_flush() has to contact a userspace program (cmirrord) for clear/mark/flush requests. But both mark and flush requests require cmirrord to communicate the message to all the cluster nodes for each flush call. This behaviour is really slow. To address this we now merge mark and flush requests together to reduce the kernel-userspace-kernel time. We allow a new directive, "integrated_flush" that can be used to instruct the kernel log code to combine flush and mark requests when directed by userspace. If not directed by userspace (due to an older version of the userspace code perhaps), the kernel will function as it did previously - preserving backwards compatibility. Additionally, flush requests are performed lazily when only clear requests exist. Signed-off-by: NDongmao Zhang <dmzhang@suse.com> Signed-off-by: NJonathan Brassow <jbrassow@redhat.com> Signed-off-by: NAlasdair G Kergon <agk@redhat.com> Signed-off-by: NMike Snitzer <snitzer@redhat.com>
-
由 Linus Torvalds 提交于
Merge first patch-bomb from Andrew Morton: - a couple of misc things - inotify/fsnotify work from Jan - ocfs2 updates (partial) - about half of MM * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (117 commits) mm/migrate: remove unused function, fail_migrate_page() mm/migrate: remove putback_lru_pages, fix comment on putback_movable_pages mm/migrate: correct failure handling if !hugepage_migration_support() mm/migrate: add comment about permanent failure path mm, page_alloc: warn for non-blockable __GFP_NOFAIL allocation failure mm: compaction: reset scanner positions immediately when they meet mm: compaction: do not mark unmovable pageblocks as skipped in async compaction mm: compaction: detect when scanners meet in isolate_freepages mm: compaction: reset cached scanner pfn's before reading them mm: compaction: encapsulate defer reset logic mm: compaction: trace compaction begin and end memcg, oom: lock mem_cgroup_print_oom_info sched: add tracepoints related to NUMA task migration mm: numa: do not automatically migrate KSM pages mm: numa: trace tasks that fail migration due to rate limiting mm: numa: limit scope of lock for NUMA migrate rate limiting mm: numa: make NUMA-migrate related functions static lib/show_mem.c: show num_poisoned_pages when oom mm/hwpoison: add '#' to hwpoison_inject mm/memblock: use WARN_ONCE when MAX_NUMNODES passed as input parameter ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata由 Linus Torvalds 提交于
Pull libata updates from Tejun Heo: "Support for some new embedded controllers. A couple late (<= a week) fixes have stable cc'd and one patch ("SATA: MV: Add support for the optional PHYs") got committed yesterday because otherwise the resulting kernel would fail boot on an embedded board due to interdependent changes in its platform tree. Other than that, nothing too noteworthy" * 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: SATA: MV: Add support for the optional PHYs sata-highbank: Remove unnecessary ahci_platform.h include libata: disable LPM for some WD SATA-I devices ARM: mvebu: update the SATA compatible string for Armada 370/XP ata: sata_mv: fix disk hotplug for Armada 370/XP SoCs ata: sata_mv: introduce compatible string "marvell, armada-370-sata" ata: pata_samsung_cf: Remove unused macros ata: pata_samsung_cf: Use devm_ioremap_resource() ata: pata_samsung_cf: Merge pata_samsung_cf.h into pata_samsung_cf.c ata: pata_samsung_cf: Move plat/regs-ata.h to drivers/ata drivers: ata: Mark the function as static in libahci.c drivers: ata: Mark the function ahci_init_interrupts() as static in ahci.c ahci: imx: fix the error handling in imx_ahci_probe() ahci: imx: ahci_imx_softreset() can be static ahci: imx: Add i.MX53 support ahci: imx: Pull out the clock enable/disable calls libata, dt: Document sata_rcar bindings sata_rcar: Add R-Car Gen2 SATA PHY support ahci: mcp89: enter AHCI mode under Apple BIOS emulation ata: libata-eh: Remove unnecessary snprintf arithmetic -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup由 Linus Torvalds 提交于
Pull cgroup updates from Tejun Heo: "The bulk of changes are cleanups and preparations for the upcoming kernfs conversion. - cgroup_event mechanism which is and will be used only by memcg is moved to memcg. - pidlist handling is updated so that it can be served by seq_file. Also, the list is not sorted if sane_behavior. cgroup documentation explicitly states that the file is not sorted but it has been for quite some time. - All cgroup file handling now happens on top of seq_file. This is to prepare for kernfs conversion. In addition, all operations are restructured so that they map 1-1 to kernfs operations. - Other cleanups and low-pri fixes" * 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: (40 commits) cgroup: trivial style updates cgroup: remove stray references to css_id doc: cgroups: Fix typo in doc/cgroups cgroup: fix fail path in cgroup_load_subsys() cgroup: fix missing unlock on error in cgroup_load_subsys() cgroup: remove for_each_root_subsys() cgroup: implement for_each_css() cgroup: factor out cgroup_subsys_state creation into create_css() cgroup: combine css handling loops in cgroup_create() cgroup: reorder operations in cgroup_create() cgroup: make for_each_subsys() useable under cgroup_root_mutex cgroup: css iterations and css_from_dir() are safe under cgroup_mutex cgroup: unify pidlist and other file handling cgroup: replace cftype->read_seq_string() with cftype->seq_show() cgroup: attach cgroup_open_file to all cgroup files cgroup: generalize cgroup_pidlist_open_file cgroup: unify read path so that seq_file is always used cgroup: unify cgroup_write_X64() and cgroup_write_string() cgroup: remove cftype->read(), ->read_map() and ->write() hugetlb_cgroup: convert away from cftype->read() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu由 Linus Torvalds 提交于
Pull percpu changes from Tejun Heo: "Two trivial changes - addition of WARN_ONCE() in lib/percpu-refcount.c and use of VMALLOC_TOTAL instead of END - START in percpu.c" * 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: percpu: use VMALLOC_TOTAL instead of VMALLOC_END - VMALLOC_START percpu-refcount: Add a WARN() for ref going negative
-
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq由 Linus Torvalds 提交于
Pull workqueue update from Tejun Heo: "Just one patch to add destroy_work_on_stack() annotations to help debugobj debugging" * 'for-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Calling destroy_work_on_stack() to pair with INIT_WORK_ONSTACK()
-
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm由 Linus Torvalds 提交于
Pull dlm update from David Teigland: "A single change to speed up recovery times when using SCTP connections" * tag 'dlm-3.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: dlm: set zero linger time on sctp socket
-
git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw由 Linus Torvalds 提交于
Pull GFS2 updates from Steven Whitehouse: "The main topics this time are allocation, in the form of Bob's improvements when searching resource groups and several updates to quotas which should increase scalability. The quota changes follow on from those in the last merge window, and there will likely be further work to come in this area in due course. There are also a few patches which help to improve efficiency of adding entries into directories, and clean up some of that code. One on-disk change is included this time, which is to write some additional information which should be useful to fsck and also potentially for debugging. Other than that, its just a few small random bug fixes and clean ups" * tag 'gfs2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-3.0-nmw: (24 commits) GFS2: revert "GFS2: d_splice_alias() can't return error" GFS2: Small cleanup GFS2: Don't use ENOBUFS when ENOMEM is the correct error code GFS2: Fix kbuild test robot reported warning GFS2: Move quota bitmap operations under their own lock GFS2: Clean up quota slot allocation GFS2: Only run logd and quota when mounted read/write GFS2: Use RCU/hlist_bl based hash for quotas GFS2: No need to invalidate pages for a dio read GFS2: Add initialization for address space in super block GFS2: Add hints to directory leaf blocks GFS2: For exhash conversion, only one block is needed GFS2: Increase i_writecount during gfs2_setattr_chown GFS2: Remember directory insert point GFS2: Consolidate transaction blocks calculation for dir add GFS2: Add directory addition info structure GFS2: Use only a single address space for rgrps GFS2: Use range based functions for rgrp sync/invalidation GFS2: Remove test which is always true GFS2: Remove gfs2_quota_change_host structure ...
-
由 Joonsoo Kim 提交于
fail_migrate_page() isn't used anywhere, so remove it. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NChristoph Lameter <cl@linux.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
Some part of putback_lru_pages() and putback_movable_pages() is duplicated, so it could confuse us what we should use. We can remove putback_lru_pages() since it is not really needed now. This makes us undestand and maintain the code more easily. And comment on putback_movable_pages() is stale now, so fix it. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Christoph Lameter <cl@linux.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joonsoo Kim 提交于
We should remove the page from the list if we fail with ENOSYS, since migrate_pages() consider error cases except -ENOMEM and -EAGAIN as permanent failure and it assumes that the page would be removed from the list. Without this patch, we could overcount number of failure. In addition, we should put back the new hugepage if !hugepage_migration_support(). If not, we would leak hugepage memory. Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NChristoph Lameter <cl@linux.com> Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Rafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Naoya Horiguchi 提交于
Let's add a comment about where the failed page goes to, which makes code more readable. Signed-off-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com> Signed-off-by: NJoonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by: NChristoph Lameter <cl@linux.com> Reviewed-by: NWanpeng Li <liwanp@linux.vnet.ibm.com> Acked-by: NRafael Aquini <aquini@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
__GFP_NOFAIL may return NULL when coupled with GFP_NOWAIT or GFP_ATOMIC. Luckily, nothing currently does such craziness. So instead of causing such allocations to loop (potentially forever), we maintain the current behavior and also warn about the new users of the deprecated flag. Suggested-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Hocko <mhocko@suse.cz> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Compaction used to start its migrate and free page scaners at the zone's lowest and highest pfn, respectively. Later, caching was introduced to remember the scanners' progress across compaction attempts so that pageblocks are not re-scanned uselessly. Additionally, pageblocks where isolation failed are marked to be quickly skipped when encountered again in future compactions. Currently, both the reset of cached pfn's and clearing of the pageblock skip information for a zone is done in __reset_isolation_suitable(). This function gets called when: - compaction is restarting after being deferred - compact_blockskip_flush flag is set in compact_finished() when the scanners meet (and not again cleared when direct compaction succeeds in allocation) and kswapd acts upon this flag before going to sleep This behavior is suboptimal for several reasons: - when direct sync compaction is called after async compaction fails (in the allocation slowpath), it will effectively do nothing, unless kswapd happens to process the compact_blockskip_flush flag meanwhile. This is racy and goes against the purpose of sync compaction to more thoroughly retry the compaction of a zone where async compaction has failed. The restart-after-deferring path cannot help here as deferring happens only after the sync compaction fails. It is also done only for the preferred zone, while the compaction might be done for a fallback zone. - the mechanism of marking pageblock to be skipped has little value since the cached pfn's are reset only together with the pageblock skip flags. This effectively limits pageblock skip usage to parallel compactions. This patch changes compact_finished() so that cached pfn's are reset immediately when the scanners meet. Clearing pageblock skip flags is unchanged, as well as the other situations where cached pfn's are reset. This allows the sync-after-async compaction to retry pageblocks not marked as skipped, such as blocks !MIGRATE_MOVABLE blocks that async compactions now skips without marking them. Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Compaction temporarily marks pageblocks where it fails to isolate pages as to-be-skipped in further compactions, in order to improve efficiency. One of the reasons to fail isolating pages is that isolation is not attempted in pageblocks that are not of MIGRATE_MOVABLE (or CMA) type. The problem is that blocks skipped due to not being MIGRATE_MOVABLE in async compaction become skipped due to the temporary mark also in future sync compaction. Moreover, this may follow quite soon during __alloc_page_slowpath, without much time for kswapd to clear the pageblock skip marks. This goes against the idea that sync compaction should try to scan these blocks more thoroughly than the async compaction. The fix is to ensure in async compaction that these !MIGRATE_MOVABLE blocks are not marked to be skipped. Note this should not affect performance or locking impact of further async compactions, as skipping a block due to being !MIGRATE_MOVABLE is done soon after skipping a block marked to be skipped, both without locking. Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Acked-by: NMel Gorman <mgorman@suse.de> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Compaction of a zone is finished when the migrate scanner (which begins at the zone's lowest pfn) meets the free page scanner (which begins at the zone's highest pfn). This is detected in compact_zone() and in the case of direct compaction, the compact_blockskip_flush flag is set so that kswapd later resets the cached scanner pfn's, and a new compaction may again start at the zone's borders. The meeting of the scanners can happen during either scanner's activity. However, it may currently fail to be detected when it occurs in the free page scanner, due to two problems. First, isolate_freepages() keeps free_pfn at the highest block where it isolated pages from, for the purposes of not missing the pages that are returned back to allocator when migration fails. Second, failing to isolate enough free pages due to scanners meeting results in -ENOMEM being returned by migrate_pages(), which makes compact_zone() bail out immediately without calling compact_finished() that would detect scanners meeting. This failure to detect scanners meeting might result in repeated attempts at compaction of a zone that keep starting from the cached pfn's close to the meeting point, and quickly failing through the -ENOMEM path, without the cached pfns being reset, over and over. This has been observed (through additional tracepoints) in the third phase of the mmtests stress-highalloc benchmark, where the allocator runs on an otherwise idle system. The problem was observed in the DMA32 zone, which was used as a fallback to the preferred Normal zone, but on the 4GB system it was actually the largest zone. The problem is even amplified for such fallback zone - the deferred compaction logic, which could (after being fixed by a previous patch) reset the cached scanner pfn's, is only applied to the preferred zone and not for the fallbacks. The problem in the third phase of the benchmark was further amplified by commit 81c0a2bb ("mm: page_alloc: fair zone allocator policy") which resulted in a non-deterministic regression of the allocation success rate from ~85% to ~65%. This occurs in about half of benchmark runs, making bisection problematic. It is unlikely that the commit itself is buggy, but it should put more pressure on the DMA32 zone during phases 1 and 2, which may leave it more fragmented in phase 3 and expose the bugs that this patch fixes. The fix is to make scanners meeting in isolate_freepage() stay that way, and to check in compact_zone() for scanners meeting when migrate_pages() returns -ENOMEM. The result is that compact_finished() also detects scanners meeting and sets the compact_blockskip_flush flag to make kswapd reset the scanner pfn's. The results in stress-highalloc benchmark show that the "regression" by commit 81c0a2bb in phase 3 no longer occurs, and phase 1 and 2 allocation success rates are also significantly improved. Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Compaction caches pfn's for its migrate and free scanners to avoid scanning the whole zone each time. In compact_zone(), the cached values are read to set up initial values for the scanners. There are several situations when these cached pfn's are reset to the first and last pfn of the zone, respectively. One of these situations is when a compaction has been deferred for a zone and is now being restarted during a direct compaction, which is also done in compact_zone(). However, compact_zone() currently reads the cached pfn's *before* resetting them. This means the reset doesn't affect the compaction that performs it, and with good chance also subsequent compactions, as update_pageblock_skip() is likely to be called and update the cached pfn's to those being processed. Another chance for a successful reset is when a direct compaction detects that migration and free scanners meet (which has its own problems addressed by another patch) and sets update_pageblock_skip flag which kswapd uses to do the reset because it goes to sleep. This is clearly a bug that results in non-deterministic behavior, so this patch moves the cached pfn reset to be performed *before* the values are read. Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: NMel Gorman <mgorman@suse.de> Acked-by: NRik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Vlastimil Babka 提交于
Currently there are several functions to manipulate the deferred compaction state variables. The remaining case where the variables are touched directly is when a successful allocation occurs in direct compaction, or is expected to be successful in the future by kswapd. Here, the lowest order that is expected to fail is updated, and in the case of successful allocation, the deferred status and counter is reset completely. Create a new function compaction_defer_reset() to encapsulate this functionality and make it easier to understand the code. No functional change. Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Acked-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
The broad goal of the series is to improve allocation success rates for huge pages through memory compaction, while trying not to increase the compaction overhead. The original objective was to reintroduce capturing of high-order pages freed by the compaction, before they are split by concurrent activity. However, several bugs and opportunities for simple improvements were found in the current implementation, mostly through extra tracepoints (which are however too ugly for now to be considered for sending). The patches mostly deal with two mechanisms that reduce compaction overhead, which is caching the progress of migrate and free scanners, and marking pageblocks where isolation failed to be skipped during further scans. Patch 1 (from mgorman) adds tracepoints that allow calculate time spent in compaction and potentially debug scanner pfn values. Patch 2 encapsulates the some functionality for handling deferred compactions for better maintainability, without a functional change type is not determined without being actually needed. Patch 3 fixes a bug where cached scanner pfn's are sometimes reset only after they have been read to initialize a compaction run. Patch 4 fixes a bug where scanners meeting is sometimes not properly detected and can lead to multiple compaction attempts quitting early without doing any work. Patch 5 improves the chances of sync compaction to process pageblocks that async compaction has skipped due to being !MIGRATE_MOVABLE. Patch 6 improves the chances of sync direct compaction to actually do anything when called after async compaction fails during allocation slowpath. The impact of patches were validated using mmtests's stress-highalloc benchmark with mmtests's stress-highalloc benchmark on a x86_64 machine with 4GB memory. Due to instability of the results (mostly related to the bugs fixed by patches 2 and 3), 10 iterations were performed, taking min,mean,max values for success rates and mean values for time and vmstat-based metrics. First, the default GFP_HIGHUSER_MOVABLE allocations were tested with the patches stacked on top of v3.13-rc2. Patch 2 is OK to serve as baseline due to no functional changes in 1 and 2. Comments below. stress-highalloc 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-nothp 3-nothp 4-nothp 5-nothp 6-nothp Success 1 Min 9.00 ( 0.00%) 10.00 (-11.11%) 43.00 (-377.78%) 43.00 (-377.78%) 33.00 (-266.67%) Success 1 Mean 27.50 ( 0.00%) 25.30 ( 8.00%) 45.50 (-65.45%) 45.90 (-66.91%) 46.30 (-68.36%) Success 1 Max 36.00 ( 0.00%) 36.00 ( 0.00%) 47.00 (-30.56%) 48.00 (-33.33%) 52.00 (-44.44%) Success 2 Min 10.00 ( 0.00%) 8.00 ( 20.00%) 46.00 (-360.00%) 45.00 (-350.00%) 35.00 (-250.00%) Success 2 Mean 26.40 ( 0.00%) 23.50 ( 10.98%) 47.30 (-79.17%) 47.60 (-80.30%) 48.10 (-82.20%) Success 2 Max 34.00 ( 0.00%) 33.00 ( 2.94%) 48.00 (-41.18%) 50.00 (-47.06%) 54.00 (-58.82%) Success 3 Min 65.00 ( 0.00%) 63.00 ( 3.08%) 85.00 (-30.77%) 84.00 (-29.23%) 85.00 (-30.77%) Success 3 Mean 76.70 ( 0.00%) 70.50 ( 8.08%) 86.20 (-12.39%) 85.50 (-11.47%) 86.00 (-12.13%) Success 3 Max 87.00 ( 0.00%) 86.00 ( 1.15%) 88.00 ( -1.15%) 87.00 ( 0.00%) 87.00 ( 0.00%) 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-nothp 3-nothp 4-nothp 5-nothp 6-nothp User 6437.72 6459.76 5960.32 5974.55 6019.67 System 1049.65 1049.09 1029.32 1031.47 1032.31 Elapsed 1856.77 1874.48 1949.97 1994.22 1983.15 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-nothp 3-nothp 4-nothp 5-nothp 6-nothp Minor Faults 253952267 254581900 250030122 250507333 250157829 Major Faults 420 407 506 530 530 Swap Ins 4 9 9 6 6 Swap Outs 398 375 345 346 333 Direct pages scanned 197538 189017 298574 287019 299063 Kswapd pages scanned 1809843 1801308 1846674 1873184 1861089 Kswapd pages reclaimed 1806972 1798684 1844219 1870509 1858622 Direct pages reclaimed 197227 188829 298380 286822 298835 Kswapd efficiency 99% 99% 99% 99% 99% Kswapd velocity 953.382 970.449 952.243 934.569 922.286 Direct efficiency 99% 99% 99% 99% 99% Direct velocity 104.058 101.832 153.961 143.200 148.205 Percentage direct scans 9% 9% 13% 13% 13% Zone normal velocity 347.289 359.676 348.063 339.933 332.983 Zone dma32 velocity 710.151 712.605 758.140 737.835 737.507 Zone dma velocity 0.000 0.000 0.000 0.000 0.000 Page writes by reclaim 557.600 429.000 353.600 426.400 381.800 Page writes file 159 53 7 79 48 Page writes anon 398 375 345 346 333 Page reclaim immediate 825 644 411 575 420 Sector Reads 2781750 2769780 2878547 2939128 2910483 Sector Writes 12080843 12083351 12012892 12002132 12010745 Page rescued immediate 0 0 0 0 0 Slabs scanned 1575654 1545344 1778406 1786700 1794073 Direct inode steals 9657 10037 15795 14104 14645 Kswapd inode steals 46857 46335 50543 50716 51796 Kswapd skipped wait 0 0 0 0 0 THP fault alloc 97 91 81 71 77 THP collapse alloc 456 506 546 544 565 THP splits 6 5 5 4 4 THP fault fallback 0 1 0 0 0 THP collapse fail 14 14 12 13 12 Compaction stalls 1006 980 1537 1536 1548 Compaction success 303 284 562 559 578 Compaction failures 702 696 974 976 969 Page migrate success 1177325 1070077 3927538 3781870 3877057 Page migrate failure 0 0 0 0 0 Compaction pages isolated 2547248 2306457 8301218 8008500 8200674 Compaction migrate scanned 42290478 38832618 153961130 154143900 159141197 Compaction free scanned 89199429 79189151 356529027 351943166 356326727 Compaction cost 1566 1426 5312 5156 5294 NUMA PTE updates 0 0 0 0 0 NUMA hint faults 0 0 0 0 0 NUMA hint local faults 0 0 0 0 0 NUMA hint local percent 100 100 100 100 100 NUMA pages migrated 0 0 0 0 0 AutoNUMA cost 0 0 0 0 0 Observations: - The "Success 3" line is allocation success rate with system idle (phases 1 and 2 are with background interference). I used to get stable values around 85% with vanilla 3.11. The lower min and mean values came with 3.12. This was bisected to commit 81c0a2bb ("mm: page_alloc: fair zone allocator policy") As explained in comment for patch 3, I don't think the commit is wrong, but that it makes the effect of compaction bugs worse. From patch 3 onwards, the results are OK and match the 3.11 results. - Patch 4 also clearly helps phases 1 and 2, and exceeds any results I've seen with 3.11 (I didn't measure it that thoroughly then, but it was never above 40%). - Compaction cost and number of scanned pages is higher, especially due to patch 4. However, keep in mind that patches 3 and 4 fix existing bugs in the current design of compaction overhead mitigation, they do not change it. If overhead is found unacceptable, then it should be decreased differently (and consistently, not due to random conditions) than the current implementation does. In contrast, patches 5 and 6 (which are not strictly bug fixes) do not increase the overhead (but also not success rates). This might be a limitation of the stress-highalloc benchmark as it's quite uniform. Another set of results is when configuring stress-highalloc t allocate with similar flags as THP uses: (GFP_HIGHUSER_MOVABLE|__GFP_NOMEMALLOC|__GFP_NORETRY|__GFP_NO_KSWAPD) stress-highalloc 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-thp 3-thp 4-thp 5-thp 6-thp Success 1 Min 2.00 ( 0.00%) 7.00 (-250.00%) 18.00 (-800.00%) 19.00 (-850.00%) 26.00 (-1200.00%) Success 1 Mean 19.20 ( 0.00%) 17.80 ( 7.29%) 29.20 (-52.08%) 29.90 (-55.73%) 32.80 (-70.83%) Success 1 Max 27.00 ( 0.00%) 29.00 ( -7.41%) 35.00 (-29.63%) 36.00 (-33.33%) 37.00 (-37.04%) Success 2 Min 3.00 ( 0.00%) 8.00 (-166.67%) 21.00 (-600.00%) 21.00 (-600.00%) 32.00 (-966.67%) Success 2 Mean 19.30 ( 0.00%) 17.90 ( 7.25%) 32.20 (-66.84%) 32.60 (-68.91%) 35.70 (-84.97%) Success 2 Max 27.00 ( 0.00%) 30.00 (-11.11%) 36.00 (-33.33%) 37.00 (-37.04%) 39.00 (-44.44%) Success 3 Min 62.00 ( 0.00%) 62.00 ( 0.00%) 85.00 (-37.10%) 75.00 (-20.97%) 64.00 ( -3.23%) Success 3 Mean 66.30 ( 0.00%) 65.50 ( 1.21%) 85.60 (-29.11%) 83.40 (-25.79%) 83.50 (-25.94%) Success 3 Max 70.00 ( 0.00%) 69.00 ( 1.43%) 87.00 (-24.29%) 86.00 (-22.86%) 87.00 (-24.29%) 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-thp 3-thp 4-thp 5-thp 6-thp User 6547.93 6475.85 6265.54 6289.46 6189.96 System 1053.42 1047.28 1043.23 1042.73 1038.73 Elapsed 1835.43 1821.96 1908.67 1912.74 1956.38 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 3.13-rc2 2-thp 3-thp 4-thp 5-thp 6-thp Minor Faults 256805673 253106328 253222299 249830289 251184418 Major Faults 395 375 423 434 448 Swap Ins 12 10 10 12 9 Swap Outs 530 537 487 455 415 Direct pages scanned 71859 86046 153244 152764 190713 Kswapd pages scanned 1900994 1870240 1898012 1892864 1880520 Kswapd pages reclaimed 1897814 1867428 1894939 1890125 1877924 Direct pages reclaimed 71766 85908 153167 152643 190600 Kswapd efficiency 99% 99% 99% 99% 99% Kswapd velocity 1029.000 1067.782 1000.091 991.049 951.218 Direct efficiency 99% 99% 99% 99% 99% Direct velocity 38.897 49.127 80.747 79.983 96.468 Percentage direct scans 3% 4% 7% 7% 9% Zone normal velocity 351.377 372.494 348.910 341.689 335.310 Zone dma32 velocity 716.520 744.414 731.928 729.343 712.377 Zone dma velocity 0.000 0.000 0.000 0.000 0.000 Page writes by reclaim 669.300 604.000 545.700 538.900 429.900 Page writes file 138 66 58 83 14 Page writes anon 530 537 487 455 415 Page reclaim immediate 806 655 772 548 517 Sector Reads 2711956 2703239 2811602 2818248 2839459 Sector Writes 12163238 12018662 12038248 11954736 11994892 Page rescued immediate 0 0 0 0 0 Slabs scanned 1385088 1388364 1507968 1513292 1558656 Direct inode steals 1739 2564 4622 5496 6007 Kswapd inode steals 47461 46406 47804 48013 48466 Kswapd skipped wait 0 0 0 0 0 THP fault alloc 110 82 84 69 70 THP collapse alloc 445 482 467 462 539 THP splits 6 5 4 5 3 THP fault fallback 3 0 0 0 0 THP collapse fail 15 14 14 14 13 Compaction stalls 659 685 1033 1073 1111 Compaction success 222 225 410 427 456 Compaction failures 436 460 622 646 655 Page migrate success 446594 439978 1085640 1095062 1131716 Page migrate failure 0 0 0 0 0 Compaction pages isolated 1029475 1013490 2453074 2482698 2565400 Compaction migrate scanned 9955461 11344259 24375202 27978356 30494204 Compaction free scanned 27715272 28544654 80150615 82898631 85756132 Compaction cost 552 555 1344 1379 1436 NUMA PTE updates 0 0 0 0 0 NUMA hint faults 0 0 0 0 0 NUMA hint local faults 0 0 0 0 0 NUMA hint local percent 100 100 100 100 100 NUMA pages migrated 0 0 0 0 0 AutoNUMA cost 0 0 0 0 0 There are some differences from the previous results for THP-like allocations: - Here, the bad result for unpatched kernel in phase 3 is much more consistent to be between 65-70% and not related to the "regression" in 3.12. Still there is the improvement from patch 4 onwards, which brings it on par with simple GFP_HIGHUSER_MOVABLE allocations. - Compaction costs have increased, but nowhere near as much as the non-THP case. Again, the patches should be worth the gained determininsm. - Patches 5 and 6 somewhat increase the number of migrate-scanned pages. This is most likely due to __GFP_NO_KSWAPD flag, which means the cached pfn's and pageblock skip bits are not reset by kswapd that often (at least in phase 3 where no concurrent activity would wake up kswapd) and the patches thus help the sync-after-async compaction. It doesn't however show that the sync compaction would help so much with success rates, which can be again seen as a limitation of the benchmark scenario. This patch (of 6): Add two tracepoints for compaction begin and end of a zone. Using this it is possible to calculate how much time a workload is spending within compaction and potentially debug problems related to cached pfns for scanning. In combination with the direct reclaim and slab trace points it should be possible to estimate most allocation-related overhead for a workload. Signed-off-by: NMel Gorman <mgorman@suse.de> Signed-off-by: NVlastimil Babka <vbabka@suse.cz> Cc: Rik van Riel <riel@redhat.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org> -
由 Michal Hocko 提交于
mem_cgroup_print_oom_info uses a static buffer (memcg_name) to store the name of the cgroup. This is not safe as pointed out by David Rientjes because memcg oom is locked only for its hierarchy and nothing prevents another parallel hierarchy to trigger oom as well and overwrite the already in-use buffer. This patch introduces oom_info_lock hidden inside mem_cgroup_print_oom_info which is held throughout the function. It makes access to memcg_name safe and as a bonus it also prevents parallel memcg ooms to interleave their statistics which would make the printed data hard to analyze otherwise. Signed-off-by: NMichal Hocko <mhocko@suse.cz> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Mel Gorman 提交于
This patch adds three tracepoints o trace_sched_move_numa when a task is moved to a node o trace_sched_swap_numa when a task is swapped with another task o trace_sched_stick_numa when a numa-related migration fails The tracepoints allow the NUMA scheduler activity to be monitored and the following high-level metrics can be calculated o NUMA migrated stuck nr trace_sched_stick_numa o NUMA migrated idle nr trace_sched_move_numa o NUMA migrated swapped nr trace_sched_swap_numa o NUMA local swapped trace_sched_swap_numa src_nid == dst_nid (should never happen) o NUMA remote swapped trace_sched_swap_numa src_nid != dst_nid (should == NUMA migrated swapped) o NUMA group swapped trace_sched_swap_numa src_ngid == dst_ngid Maybe a small number of these are acceptable but a high number would be a major surprise. It would be even worse if bounces are frequent. o NUMA avg task migs. Average number of migrations for tasks o NUMA stddev task mig Self-explanatory o NUMA max task migs. Maximum number of migrations for a single task In general the intent of the tracepoints is to help diagnose problems where automatic NUMA balancing appears to be doing an excessive amount of useless work. [akpm@linux-foundation.org: remove semicolon-after-if, repair coding-style] Signed-off-by: NMel Gorman <mgorman@suse.de> Reviewed-by: NRik van Riel <riel@redhat.com> Cc: Alex Thorlton <athorlton@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-