- 07 9月, 2010 1 次提交
-
-
由 Alex Deucher 提交于
These VGT regs need to be programmed via the ring rather than MMIO as on previous asics (r6xx/r7xx). Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 03 9月, 2010 3 次提交
-
-
由 Marcin Slusarz 提交于
We need it for PFIFO_INTR_CACHE_ERROR interrupt handling, because nouveau_fifo_swmthd looks for matching gpuobj in ramht_refs list. It fixes kernel panic in nouveau_gpuobj_ref_find. Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
We don't need it and it can lead to lock order inversions with respect to drm_global_mutex, potentially causing dead locks. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
It fixes a race between the TTM delayed work queue and the GEM IOCTLs (fdo bug 29583) uncovered by the BKL removal. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 02 9月, 2010 5 次提交
-
-
由 Alex Deucher 提交于
The 7th entry in a lot of evergreen i2c gpio tables is partially zeroed. Fix the entry. Should fix the missing ddc entry in: https://bugs.freedesktop.org/show_bug.cgi?id=29255Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The tv parameter was added to disable the tv-out connector, however, it caused a crash if it was set to 0 due to drm_connector_init not getting called. If tv=0, don't attempt to add the connector. Might fix: https://bugzilla.kernel.org/show_bug.cgi?id=17241Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
There has been periodic evidence that LVDS, on at least some panels, prefers the dividers selected by the legacy pll algo. This patch forces the use of the legacy pll algo on RV515 LVDS panels. The old behavior (new pll algo) can be selected by setting the new_pll module parameter to 1. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
This code was originally for forcing some clocks on certain asics. However, this code was later moved to asic specific functions for all of the affected asics. The only users of the original code at this point were r600, rv770, and evergreen and the code was not relevant for those asics. So, remove it. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 30 8月, 2010 2 次提交
-
-
由 Alex Deucher 提交于
commit: 812d0469 drm/radeon/kms/r7xx: add workaround for hw issue with HDP flush breaks on AGP boards since there is no VRAM gart table. This patch fixes the issue by creating a VRAM scratch page so that can be used on both AGP and PCIE. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29834Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Rather than calling get_memory_clock and get_engine_clock, used the tracked values from the pm code. Calling the tables adds additional latency in the modesetting and pm paths. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 27 8月, 2010 7 次提交
-
-
由 Alex Deucher 提交于
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Adam Jackson 提交于
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=16651Signed-off-by: NAdam Jackson <ajax@redhat.com> Tested-by: NAdam Serbinski <adam@serbinksi.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Arnd Bergmann 提交于
This locking path needs proper auditing but probably too late for changes at this point for 2.6.36, so lets go with the quick fix, which is to drop the lock around schedule. Reported-by: NAndreas Schwab <schwab@linux-m68k.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
I missed this one in the i2c unification patch. This is handled in the core radeon i2c code now. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Daniel Vetter 提交于
With the code cleanup in 7a6b2896 is the first bad commit commit 7a6b2896 Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Fri Jul 2 15:02:15 2010 +0100 drm_mm: extract check_free_mm_node I've botched up the range-restriction checks. The result is usually an X server dying with SIGBUS in libpixman (software fallback rendering). Change the code to adjust the start and end for range restricted allocations. IMHO this even makes the code a bit clearer. Fixes regression bug: https://bugs.freedesktop.org/show_bug.cgi?id=29738Reported-by-Tested-by: NTill MAtthiesen <entropy@everymail.net> Acked-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ben Skeggs 提交于
If we keep hold of the mutex here, the process which currently holds the buffer object will never be able to release it, causing a deadlock. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Nouveau needs to be able to drop the mutex before sleeping to prevent a deadlock from occuring. Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 26 8月, 2010 6 次提交
-
-
由 Francisco Jerez 提交于
The "return" command is buggy on the original nv20, it jumps back to the caller address as expected, but it doesn't clear the subroutine active bit making the subsequent pushbuf calls fail with a "stack" overflow. Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
The TMDS output of an nv11 was being detected as LVDS, because it uses DCB type 2 for TMDS instead of type 4. Reported-by: NBertrand VIEILLE <Vieille.Bertrand@free.fr> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
This commit fixes fdo bug 29685. Reported-by: NVlado Plaga <rechner@vlado-do.de> Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Patrice Mandin 提交于
Signed-off-by: NPatrice Mandin <patmandin@gmail.com> Reviewed-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Francisco Jerez 提交于
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net> Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
由 Ben Skeggs 提交于
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
-
- 25 8月, 2010 1 次提交
-
-
由 Jesse Barnes 提交于
When converting this to the new wait_for macro I inverted the wait condition, which causes all sorts of problems. So correct it to fix several failures caused by the bad wait (flickering, bad output detection, tearing, etc.). Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk> Tested-by: NSitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 8月, 2010 4 次提交
-
-
由 Alex Deucher 提交于
Looks like this got copied from the ddx wrong. Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
When enabling underscan for hdmi monitors, attempt to detect whether we are driving a TV or a monitor. The should hopefully prevent underscan from being enabled on monitors attached via hdmi that do not overscan the image. Only enable underscan if the mode is a common hdtv mode (480p, 720p, etc.). Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The meaning of ucMemoryType changed on recent boards, however, ulBootUpSidePortClock should be set properly across all boards. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dave Airlie 提交于
We are passing a ttm type when we want to pass true/false. Reported-by: NDr. David Alan Gilbert <linux@treblig.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
- 22 8月, 2010 7 次提交
-
-
由 Zhenyu Wang 提交于
Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Zhenyu Wang 提交于
This one is missed in last pipe control fix for sandybridge, that really unmask interrupt bit for notify in render engine IMR. Signed-off-by: NZhenyu Wang <zhenyuw@linux.intel.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
We now attempt to free "active" objects following a GPU hang as either the GPU will be reset or the hang is permenant. In either case, the GPU writes will not be flushed to main memory and it should be safe to return that memory back to the system. The BUG_ON(active) is thus overkill and can erroneously fire after a EIO. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
For the shared paths on the next generation chipsets. Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Chris Wilson 提交于
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Dave Airlie 提交于
Like on Sandybridge, disabling the DAC here when doing CRT load detect avoids forever hangs waiting on the hardware. test procedure on HP 2740p: boot with no VGA plugged in, start X, plug in VGA monitor (1280x1024) chvt 3 machine hangs waiting forever. Signed-off-by: NDave Airlie <airlied@redhat.com> Signed-off-by: NEric Anholt <eric@anholt.net>
-
由 Jesse Barnes 提交于
Waiting for a hard coded 20ms isn't always enough to make sure a vblank period has actually occurred, so add code to make sure we really have passed through a vblank period (or that the pipe is off when disabling). This prevents problems with mode setting and link training, and seems to fix a bug like https://bugs.freedesktop.org/show_bug.cgi?id=29278, but on an HP 8440p instead. Hopefully also fixes https://bugs.freedesktop.org/show_bug.cgi?id=29141. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: NEric Anholt <eric@anholt.net>
-
- 20 8月, 2010 4 次提交
-
-
由 Alex Deucher 提交于
Fixes the pink line that shows up with some hdmi monitors. This will need to be revisited when audio support is added. Fixes: http://bugs.freedesktop.org/show_bug.cgi?id=27452Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dmitry Torokhov 提交于
Noone is using tty argument so let's get rid of it. Acked-by: NAlan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: NJason Wessel <jason.wessel@windriver.com> Acked-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NDmitry Torokhov <dtor@mail.ru>
-
由 Alex Deucher 提交于
This seems to have gotten lost in the hyper-z merge. Noticed by legume on IRC. Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=29327Signed-off-by: NAlex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-