After commit 5a8132b9 ("drm/amd/display: remove dead dc vbios code"),
no one use struct i2c_id_config_access, so remove it.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NYuan Can <yuancan@huawei.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Kernel test robot throws below warning ->

drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:
In function 'dcn31_hpo_dp_stream_enc_update_dp_info_packets':
   drivers/gpu/drm/amd/amdgpu/../display/dc/dcn31/dcn31_hpo_dp_stream_encoder.c:439:14:
warning: variable 'sdp_stream_enable' set but not used
[-Wunused-but-set-variable]
   439 |         bool sdp_stream_enable = false;

Removed unused variable 'sdp_stream_enable'.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NDong Chenchen <dongchenchen2@huawei.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Rectify multiple kernel-doc warnings in dcn32_fpu.c.
E.g.:

drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
    * Finds dummy_latency_index when MCLK switching using firmware based
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:484: warning: Function parameter or member 'phantom_stream' not described in 'dcn32_set_phantom_stream_timing'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'dc' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'context' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:601: warning: Function parameter or member 'index' not described in 'dcn32_assign_subvp_pipe'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'dc' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: Function parameter or member 'bw_params' not described in 'dcn32_update_bw_bounding_box_fpu'
drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn32/dcn32_fpu.c:2140: warning: expecting prototype for dcn32_update_bw_bounding_box(). Prototype was for dcn32_update_bw_bounding_box_fpu() instead
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: George Shen <george.shen@amd.com>
Cc: Alvin Lee <alvin.lee2@amd.com>
Cc: Nevenko Stupar <Nevenko.Stupar@amd.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

manage_dm_interrupts disable/enable vblank using drm_crtc_vblank_off/on
which causes drm_crtc_vblank_get in vrr_transition to fail, and later
when drm_crtc_vblank_put is called the refcount on vblank will be messed
up. Therefore move the call to after manage_dm_interrupts.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1247
Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1380Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NYunxiang Li <Yunxiang.Li@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
DCN 3.1.4 supports DPIA.

[How]
 - Set dpia_supported flag for dcn314 in dmub_hw_init()
 - Remove comment that becomes irrelevant after this change.
Signed-off-by: NRoman Li <roman.li@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Reviewed-by: NMario Limonciello <mario.limonciello@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

This patch is to fix the SDMA user queue doorbell missing issue on
SDMA 6.0. F32_WPTR_POLL_ENABLE has to be set if doorbell mode is
used. Otherwise ringing SDMA user queue doorbell can't wake up
system from gfxoff.
Signed-off-by: NRuili Ji <ruiliji2@amd.com>
Reviewed-by: NYifan Zhang <yifan1.zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

In some error path in amdgpu_sdma_init_microcode(), release_firmware() is
not called, the memory allocated in request_firmware() will be leaked,
calling amdgpu_sdma_destroy_inst_ctx() which calls release_firmware() to
avoid memory leak.

Fixes: 15aa1305 ("drm/amdgpu: add function to init SDMA microcode")
Signed-off-by: NYang Yingliang <yangyingliang@huawei.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clean up one inconsistent indenting

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2321Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

clean up one inconsistent indenting

Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=2238Reported-by: NAbaci Robot <abaci@linux.alibaba.com>
Signed-off-by: NYang Li <yang.lee@linux.alibaba.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This commit adds some minor code style changes just to reduce the merge
conflicts we have when we upstream some of the VBA code.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Update DSC checks in the DCN32 VBA.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
During transition from ODM combine to ODM bypass, if DSC is enabled need
to disconnect the DSC mux for pipes no longer in use.

[How]
During ODM update, detect pipes with DSC that are no longer being used
for new state and call new DSC interface to disconnect.

Add new DSC interface to disconnect from pipe
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

why and how:
needed to fix bad assumption for enable mcm_luts
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NMartin Leung <Martin.Leung@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along the following:
- ILR improvements
- PSR fixes
- DCN315 fixes
- DCN32 fixes
- ODM fixes
- DSC fixes
- SubVP fixes
Reviewed-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

If the current configuration supports 2 to 1 ODM policy, let's also
enable the windowed MPO feature.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

For some reason, we missed the PState check for DCN32 which may cause
issues for clock transition. This commit add that required hook.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable VCN PG on GC11_0_1
Signed-off-by: NSonny Jiang <sonny.jiang@amd.com>
Reviewed-by: NJames Zhu <James.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.0.x

There is a missing register mask in dcn32 causing the hardware
programming is not executed when programming SQ_num test pattern for
DP2.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Certain features require the additional DP SDP configuration registers
DP_SEC_CNTL1 and DP_SEC_CNTL5 in order to function correctly.

The DCN32 DIO stream encoder reglist is currently missing these two
registers.

[How]
Add the missing registers to the DCN32 DIO stream encoder reglist.
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NGeorge Shen <George.Shen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
In DIO stream encoder, definition of DP_DSC_MODE is changed (only
enable/disable) In OPTC, OTG_SET_V_TOTAL_MIN_MASK_EN is removed (same as
DCN3.1)

[How]
In DIO stream encoder, update enc32_dp_set_dsc_config(). In OPTC, use
DCN3.1 version for function interfaces .set_vrr_m_const and .set_drr
Reviewed-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY&HOW?]
When merging ODM pipes that are using MPO, we must copy the stream_res
from the new top pipe to the bottom pipe so that the overlayed plane is
not pointing to the wrong stream assets.
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NDillon Varone <Dillon.Varone@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add HDMI ACP bit field definition for DCN32.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

At some point, we decided to blank HUBP during pixel data blank, and to
handle that, we added some OPTC lock checks. Later, we realized that
this change caused multiple regression, and we removed it. Nevertheless,
we still have some leftovers that might affect some ASIC behavior, and
this commit drops those changes to keep the code consistent.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

SubVP has some issues related to how we allocate and enable it. This
commit fixes this behavior by adding the proper check and configuration
to the SubVP code path.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DCN provides a hook to check if we can have a new pipe allocation based
on some DC constraints. If the current configuration supports the new
pipe request, DC updates its context; otherwise, it will keep the same
configuration. This behavior is similar across multiple ASICs, and for
this reason, we reused DCN20 on DCN321. However, this DCN32x has some
peculiarities which require its function to avoid weird pipe split
issues. This commit update this issue by using
dcn32_acquire_idle_pipe_for_head_pipe_in_layer instead of
dcn20_acquire_idle_pipe_for_layer.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Under DCN32/321 we identified some code paths that DC never executes.
This commit removes those unused codes to avoid distractions when
debugging issues.
Reviewed-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

why:
when dynamic odm was turned on, there is also logic to halve the pixelclk
this still turned on when we avoided odm in the case of odd h_total timings

how:
block the pixel clk mechanism also in the case of odd h_total timings
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NMartin Leung <Martin.Leung@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[how]
Large deltas for periodic interrupts could result in the interrupt not
being programmed properly and thus not firing.

[why]
Add proper wrap-around support for calculating VUPDATE and VLINE
positions.
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
According to specs, it expects us to write all 4 bytes even if
current lane count is less than 4.
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY?]
Clocks are updating based on the incoming context's support, however the new
compbuf size is not programmed prior to udpating clocks, which can result in
P-State hangs.

[HOW?]
Increase compbuf size prior to updating clocks.
Reviewed-by: NAlvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NDillon Varone <Dillon.Varone@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Disable OTG when PSRSU with z10 even if z10 is disable

[How]
Reverse condition to keep OTG on when Z10 is disable
Reviewed-by: NRobin Chen <po-tchen@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NLewis Huang <Lewis.Huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DCN315 has to always allow pstate change or SMU will hang. This
workaround achieves this by applying a low pstate change latency
to be used when pstate is calculated to be unsupported. This lower
latency only accounts for memory retraining; a previous change
handles locking in the highest available pstate allowing us to minimize
required latency hiding to only account for memory retraining.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of
minimal transition too often. Commit state of dc with no check
will do pipeline setup which may re-initialize the component with no
need such as audio.

[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Reviewed-by: NDillon Varone <Dillon.Varone@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NZhikai Zhai <zhikai.zhai@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Adding log for LTTPR to facilitate debugging.
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NLeo Chen <sancchen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
- For SubVP pipe split case we need to use a minimial transition
  when opening MPO video since we are transitioning from 4 pipes
  to 3 pipes where an OPP for a previous MPCC will change
- Also save and restore mall config when doing fast_validate in case
  there was a shallow copy of the dc->current_state
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We split out ILR config from "global" to "per-panel" config settings.
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NIan Chen <ian.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[HOW&WHY]
Fixed check to only avoid PSR entry when panel
is disconnected. PSR exit can be permitted to restore
the HW to it's non-PSR state.
Reviewed-by: NJayendran Ramani <Jayendran.Ramani@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NIswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why && How]
Remove the unnecessary AUX trace and use one trace for AUX failure.
Reviewed-by: NMartin Leung <Martin.Leung@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NLeo (Hanghong) Ma <hanghong.ma@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Analyzer shows incorrect V freq in MSA for some large timing.

[how]
Cast an 32 bit integer to uint64_t before multiplication to avoid
integer overflow for a very large timing.
Reviewed-by: NAriel Bernstein <Eric.Bernstein@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Description]
When enabling phantom pipe on a pipe that was previously
using immediate flip, we have to disable GSL or this will
prevent the update from taking place right away on the phantom
pipe when we enable it in FW
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NHamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: NAlvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>