Unlike PPC64, PPC32 doesn't require any special compiler option
to get _mcount() call not clobbering registers.

Provide ftrace_regs_caller() and ftrace_regs_call() and activate
HAVE_DYNAMIC_FTRACE_WITH_REGS.

That's heavily copied from ftrace_64_mprofile.S

For the time being leave livepatching aside, it will come with
following patch.
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1862dc7719855cc2a4eec80920d94c955877557e.1635423081.git.christophe.leroy@csgroup.eu

module_trampoline_target() is used by __ftrace_modify_call().

Implement it for PPC32 so that CONFIG_DYNAMIC_FTRACE_WITH_REGS
can be activated on PPC32 as well.
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/42345f464fb465f0fc76f3090e250be8fc1729f0.1635423081.git.christophe.leroy@csgroup.eu

All functions calling _mcount do it exactly the same way, with the
following sequence of instructions:

	c07de788:       7c 08 02 a6     mflr    r0
	c07de78c:       90 01 00 04     stw     r0,4(r1)
	c07de790:       4b 84 13 65     bl      c001faf4 <_mcount>

Allthough LR is pushed on stack, it is still in r0 while entering
_mcount().

Function arguments are in r3-r10, so r11 and r12 are still available
at that point.

Do like PPC64 and use r12 to move LR into CTR, so that r0 is preserved
and doesn't need to be restored from the stack.

While at it, bring back the EXPORT_SYMBOL at the end of _mcount.
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/24a3ba7db388537c44a038026f926d885372e6d3.1635423081.git.christophe.leroy@csgroup.eu

Prior to commit b1923caa ("powerpc: Merge 32-bit and 64-bit
setup_arch()") probe_machine() was called from setup_32/64.c and lived
in setup-common.c. But now it's only called from setup-common.c so it
can be static and __init, and we don't need the declaration in
machdep.h either.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-6-mpe@ellerman.id.au

setup_profiling_timer() is only needed when CONFIG_PROFILING is enabled.

Fixes the following W=1 warning when CONFIG_PROFILING=n:
  linux/arch/powerpc/kernel/smp.c:1638:5: error: no previous prototype for ‘setup_profiling_timer’
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-5-mpe@ellerman.id.au

Building with W=1 we see a warning:
  linux/arch/powerpc/mm/nohash/fsl_book3e.c:63:15: error: no previous prototype for ‘tlbcam_sz’

tlbcam_sz() is not used outside this file, so we can make it static.
However it's only used inside #ifdef CONFIG_PPC32, so move it within
that ifdef, otherwise we would get a defined but not used error.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-4-mpe@ellerman.id.au

To fix the W=1 warning:
  linux/arch/powerpc/platforms/85xx/c293pcie.c:22:13: error: no previous prototype for ‘c293_pcie_pic_init’
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-3-mpe@ellerman.id.au

To fix the W=1 warning:
  arch/powerpc/platforms/85xx/smp.c:369:6: error: no previous prototype for ‘mpc85xx_smp_kexec_cpu_down’
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-2-mpe@ellerman.id.au

Fixes the following W=1 warning:
  arch/powerpc/platforms/85xx/mpc85xx_pm_ops.c:89:12: warning: no previous prototype for 'mpc85xx_setup_pmc'
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211124093254.1054750-1-mpe@ellerman.id.au

Some core kernel code starts to go beyond the 2048 byte stack size
warning at NR_CPUS=8192, so select CPUMASK_OFFSTACK in that case.
x86 does similarly for very large NR_CPUS.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105035042.1398309-2-npiggin@gmail.com

This function builds the cores online map with on-stack cpumasks which
can cause high stack usage with large NR_CPUS.

It is not used in any performance sensitive paths, so instead just check
for first thread sibling.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Tested-by: NSachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105035042.1398309-1-npiggin@gmail.com

This reverts commit 8b8a8f0a.

As reported[1] by Sachin this causes problems with ftrace, and it also
causes the code patching selftests to fail as reported[2] by Stephen.

So revert it for now.

1: https://lore.kernel.org/linuxppc-dev/3668743C-09DF-4673-B15C-2FFE2A57F7D7@linux.vnet.ibm.com/
2: https://lore.kernel.org/linuxppc-dev/20211126161747.1f7795b0@canb.auug.org.au/Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

wd_smp_last_reset_tb now gets reset by watchdog_smp_panic() as part of
marking CPUs stuck and removing them from the pending mask before it
begins any printing. This causes last reset times reported to be off.

Fix this by reading it into a local variable before it gets reset.

Fixes: 76521c4b ("powerpc/watchdog: Avoid holding wd_smp_lock over printk and smp_send_nmi_ipi")
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211125103346.1188958-1-npiggin@gmail.com

Make microwatt_get_random_darn() static, because it can be.
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211118004415.1706863-1-mpe@ellerman.id.au

When taking watchdog actions, printing messages, comparing and
re-setting wd_smp_last_reset_tb, etc., read TB close to the point of use
and under wd_smp_lock or printing lock (if applicable).

This should keep timebase mostly monotonic with kernel log messages, and
could prevent (in theory) a laggy CPU updating wd_smp_last_reset_tb to
something a long way in the past, and causing other CPUs to appear to be
stuck.

These additional TB reads are all slowpath (lockup has been detected),
so performance does not matter.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NLaurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-5-npiggin@gmail.com

There is a deadlock with the console_owner lock and the wd_smp_lock:

CPU x takes the console_owner lock
CPU y takes a watchdog timer interrupt and takes __wd_smp_lock
CPU x takes a soft-NMI interrupt, detects deadlock, spins on __wd_smp_lock
CPU y detects deadlock, tries to print something and spins on console_owner
-> deadlock

Change the watchdog locking scheme so wd_smp_lock protects the watchdog
internal data, but "reporting" (printing, issuing NMI IPIs, taking any
action outside of watchdog) uses a non-waiting exclusion. If a CPU detects
a problem but can not take the reporting lock, it just returns because
something else is already reporting. It will try again at some point.

Typically hard lockup watchdog report usefulness is not impacted due to
failure to spewing a large enough amount of data in as short a time as
possible, but by messages getting garbled.

Laurent debugged this and found the deadlock, and this patch is based on
his general approach to avoid expensive operations while holding the lock.
With the addition of the reporting exclusion.
Signed-off-by: NLaurent Dufour <ldufour@linux.ibm.com>
[np: rework to add reporting exclusion update changelog]
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-4-npiggin@gmail.com

Most updates to wd_smp_cpus_pending are under lock except the watchdog
interrupt bit clear.

This can race with non-atomic RMW updates to the mask under lock, which
can happen in two instances:

Firstly, if another CPU detects this one is stuck, removes it from the
mask, mask becomes empty and is re-filled with non-atomic stores. This
is okay because it would re-fill the mask with this CPU's bit clear
anyway (because this CPU is now stuck), so it doesn't matter that the
bit clear update got "lost". Add a comment for this.

Secondly, if another CPU detects a different CPU is stuck and removes it
from the pending mask with a non-atomic store to bytes which also
include the bit of this CPU. This case can result in the bit clear being
lost and the end result being the bit is set. This should be so rare it
hardly matters, but to make things simpler to reason about just avoid
the non-atomic access for that case.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NLaurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-3-npiggin@gmail.com

It is possible for all CPUs to miss the pending cpumask becoming clear,
and then nobody resetting it, which will cause the lockup detector to
stop working. It will eventually expire, but watchdog_smp_panic will
avoid doing anything if the pending mask is clear and it will never be
reset.

Order the cpumask clear vs the subsequent test to close this race.

Add an extra check for an empty pending mask when the watchdog fires and
finds its bit still clear, to try to catch any other possible races or
bugs here and keep the watchdog working. The extra test in
arch_touch_nmi_watchdog is required to prevent the new warning from
firing off.
Signed-off-by: NNicholas Piggin <npiggin@gmail.com>
Reviewed-by: NLaurent Dufour <ldufour@linux.ibm.com>
Debugged-by: NLaurent Dufour <ldufour@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211110025056.2084347-2-npiggin@gmail.com

prom_getprop() can return PROM_ERROR. Binary operator can not identify
it.

Fixes: 94d2dde7 ("[POWERPC] Efika: prune fixups and make them more carefull")
Signed-off-by: NPeiwei Hu <jlu.hpw@foxmail.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/tencent_BA28CC6897B7C95A92EB8C580B5D18589105@qq.com

Provide API documentation for rtas_busy_delay_time(), explaining why we
return the same value for 9900 and -2.
Signed-off-by: NNathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211117060259.957178-3-nathanl@linux.ibm.com

Generally RTAS cannot block, and in PAPR it is required to return control
to the OS within a few tens of microseconds. In order to support operations
which may take longer to complete, many RTAS primitives can return
intermediate -2 ("busy") or 990x ("extended delay") values, which indicate
that the OS should reattempt the same call with the same arguments at some
point in the future.

Current versions of PAPR are less than clear about this, but the intended
meanings of these values in more detail are:

RTAS_BUSY (-2): RTAS has suspended a potentially long-running operation in
order to meet its latency obligation and give the OS the opportunity to
perform other work. RTAS can resume making progress as soon as the OS
reattempts the call.

RTAS_EXTENDED_DELAY_{MIN...MAX} (9900-9905): RTAS must wait for an external
event to occur or for internal contention to resolve before it can complete
the requested operation. The value encodes a non-binding hint as to roughly
how long the OS should wait before calling again, but the OS is allowed to
reattempt the call sooner or even immediately.

Linux of course must take its own CPU scheduling obligations into account
when handling these statuses; e.g. a task which receives an RTAS_BUSY
status should check whether to reschedule before it attempts the RTAS call
again to avoid starving other tasks.

rtas_busy_delay() is a helper function that "consumes" a busy or extended
delay status. Common usage:

    int rc;

    do {
        rc = rtas_call(rtas_token("some-function"), ...);
    } while (rtas_busy_delay(rc));

    /* convert rc to Linux error value, etc */

If rc is a busy or extended delay status, the caller can rely on
rtas_busy_delay() to perform an appropriate sleep or reschedule and return
nonzero. Other statuses are handled normally by the caller.

The current implementation of rtas_busy_delay() both oversleeps and
overuses the CPU:

*  It performs msleep() for all 990x and even when no delay is
   suggested (-2), but this is understood to actually sleep for two jiffies
   minimum in practice (20ms with HZ=100). 9900 (1ms) and 9901 (10ms)
   appear to be the most common extended delay statuses, and the
   oversleeping measurably lengthens DLPAR operations, which perform
   many RTAS calls.

*  It does not sleep on 990x unless need_resched() is true, causing code
   like the loop above to needlessly retry, wasting CPU time.

Alter the logic to align better with the intended meanings:

*  When passed RTAS_BUSY, perform cond_resched() and return without
   sleeping. The caller should reattempt immediately

*  Always sleep when passed an extended delay status, using usleep_range()
   for precise shorter sleeps. Limit the sleep time to one second even
   though there are higher architected values.

Change rtas_busy_delay()'s return type to bool to better reflect its usage,
and add kernel-doc.

rtas_busy_delay_time() is unchanged, even though it "incorrectly" returns 1
for RTAS_BUSY. There are users of that API with open-coded delay loops in
sensitive contexts that will have to be taken on an individual basis.

Brief results for addition and removal of 5GB memory on a small P9 PowerVM
partition follow. Load was generated with stress-ng --cpu N. For add,
elapsed time is greatly reduced without significant change in the number of
RTAS calls or time spent on CPU. For remove, elapsed time is modestly
reduced, with significant reductions in RTAS calls and time spent on CPU.

With no competing workload (- before, + after):

  Performance counter stats for 'bash -c echo "memory add count 20" > /sys/kernel/dlpar' (10 runs):

-             1,935      probe:rtas_call           #    0.003 M/sec                    ( +-  0.22% )
-            609.99 msec task-clock                #    0.183 CPUs utilized            ( +-  0.19% )
+             1,956      probe:rtas_call           #    0.003 M/sec                    ( +-  0.17% )
+            618.56 msec task-clock                #    0.278 CPUs utilized            ( +-  0.11% )

-            3.3322 +- 0.0670 seconds time elapsed  ( +-  2.01% )
+            2.2222 +- 0.0416 seconds time elapsed  ( +-  1.87% )

  Performance counter stats for 'bash -c echo "memory remove count 20" > /sys/kernel/dlpar' (10 runs):

-             6,224      probe:rtas_call           #    0.008 M/sec                    ( +-  2.57% )
-            750.36 msec task-clock                #    0.190 CPUs utilized            ( +-  2.01% )
+               843      probe:rtas_call           #    0.003 M/sec                    ( +-  0.12% )
+            250.66 msec task-clock                #    0.068 CPUs utilized            ( +-  0.17% )

-            3.9394 +- 0.0890 seconds time elapsed  ( +-  2.26% )
+             3.678 +- 0.113 seconds time elapsed  ( +-  3.07% )

With all CPUs 100% busy (- before, + after):

  Performance counter stats for 'bash -c echo "memory add count 20" > /sys/kernel/dlpar' (10 runs):

-             2,979      probe:rtas_call           #    0.003 M/sec                    ( +-  0.12% )
-          1,096.62 msec task-clock                #    0.105 CPUs utilized            ( +-  0.10% )
+             2,981      probe:rtas_call           #    0.003 M/sec                    ( +-  0.22% )
+          1,095.26 msec task-clock                #    0.154 CPUs utilized            ( +-  0.21% )

-            10.476 +- 0.104 seconds time elapsed  ( +-  1.00% )
+            7.1124 +- 0.0865 seconds time elapsed  ( +-  1.22% )

  Performance counter stats for 'bash -c echo "memory remove count 20" > /sys/kernel/dlpar' (10 runs):

-             2,702      probe:rtas_call           #    0.004 M/sec                    ( +-  4.00% )
-            722.71 msec task-clock                #    0.067 CPUs utilized            ( +-  2.41% )
+             1,246      probe:rtas_call           #    0.003 M/sec                    ( +-  0.25% )
+            487.73 msec task-clock                #    0.049 CPUs utilized            ( +-  0.20% )

-            10.829 +- 0.163 seconds time elapsed  ( +-  1.51% )
+            9.9887 +- 0.0866 seconds time elapsed  ( +-  0.87% )
Signed-off-by: NNathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211117060259.957178-2-nathanl@linux.ibm.com

Remove the pseries scanlog driver.

This code supports functions from Power4-era servers that are not present
on targets currently supported by arch/powerpc. System manuals from this
time have this description:

  Scan Dump data is a set of chip data that the service processor gathers
  after a system malfunction. It consists of chip scan rings, chip trace
  arrays, and Scan COM (SCOM) registers. This data is stored in the
  scan-log partition of the system’s Nonvolatile Random Access
  Memory (NVRAM).

PowerVM partition firmware development doesn't recognize the associated
function call or property, and they don't see any references to them in
their codebase. It seems to have been specific to non-virtualized pseries.

References:

Historical Linux commit from February 2003 (interesting to note this seems
to be the source of non-GPL exports for rtas_call etc):
https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=f92e361842d5251e50562b09664082dcbd0548bb

IntelliStation and pSeries docs which refer to the feature:
http://ps-2.retropc.se/basil.holloway/ALL%20PDF/380635.pdf
http://ps-2.kev009.com/rs6000/manuals/p/p615-6C3-6E3/6C3_and_6E3_Users_Guide_SA38-0629.pdfSigned-off-by: NNathan Lynch <nathanl@linux.ibm.com>
Reviewed-by: NTyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210920173203.1800475-1-nathanl@linux.ibm.com

Fix the following issues reported by kernel-doc:

$ scripts/kernel-doc -v -none arch/powerpc/kernel/rtas.c
arch/powerpc/kernel/rtas.c:810: info: Scanning doc for function rtas_activate_firmware
arch/powerpc/kernel/rtas.c:818: warning: contents before sections
arch/powerpc/kernel/rtas.c:841: info: Scanning doc for function rtas_call_reentrant
arch/powerpc/kernel/rtas.c:893: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 * Find a specific pseries error log in an RTAS extended event log.
Signed-off-by: NNathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211116215806.928235-1-nathanl@linux.ibm.com

Today, patch_instruction() assumes that it is called exclusively on
valid addresses, and only checks that it is not called on an init
address after init section has been freed.

Improve verification by calling kernel_text_address() instead.

kernel_text_address() already includes a verification of
initmem release.
Signed-off-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/bc683d499a411730504b132a924de0ccc2ef1f79.1636971137.git.christophe.leroy@csgroup.eu

EXPORT_SYMBOL(foo); should immediately follow its function/variable.
Signed-off-by: NJason Wang <wangborong@cdjrlc.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211114115616.493815-1-wangborong@cdjrlc.com

With KUAP enabled, any kernel code which wants to access userspace
needs to be surrounded by disable-enable KUAP. But that is not
happening for BPF_PROBE_MEM load instruction. Though PPC32 does not
support read protection, considering the fact that PTR_TO_BTF_ID
(which uses BPF_PROBE_MEM mode) could either be a valid kernel pointer
or NULL but should never be a pointer to userspace address, execute
BPF_PROBE_MEM load only if addr is kernel address, otherwise set
dst_reg=0 and move on.

This will catch NULL, valid or invalid userspace pointers. Only bad
kernel pointer will be handled by BPF exception table.

[Alexei suggested for x86]
Suggested-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NHari Bathini <hbathini@linux.ibm.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-9-hbathini@linux.ibm.com

BPF load instruction with BPF_PROBE_MEM mode can cause a fault
inside kernel. Append exception table for such instructions
within BPF program.

Unlike other archs which uses extable 'fixup' field to pass dest_reg
and nip, BPF exception table on PowerPC follows the generic PowerPC
exception table design, where it populates both fixup and extable
sections within BPF program. fixup section contains 3 instructions,
first 2 instructions clear dest_reg (lower & higher 32-bit registers)
and last instruction jumps to next instruction in the BPF code.
extable 'insn' field contains relative offset of the instruction and
'fixup' field contains relative offset of the fixup entry. Example
layout of BPF program with extable present:

             +------------------+
             |                  |
             |                  |
   0x4020 -->| lwz   r28,4(r4)  |
             |                  |
             |                  |
   0x40ac -->| lwz  r3,0(r24)   |
             | lwz  r4,4(r24)   |
             |                  |
             |                  |
             |------------------|
   0x4278 -->| li  r28,0        |  \
             | li  r27,0        |  | fixup entry
             | b   0x4024       |  /
   0x4284 -->| li  r4,0         |
             | li  r3,0         |
             | b   0x40b4       |
             |------------------|
   0x4290 -->| insn=0xfffffd90  |  \ extable entry
             | fixup=0xffffffe4 |  /
   0x4298 -->| insn=0xfffffe14  |
             | fixup=0xffffffe8 |
             +------------------+

   (Addresses shown here are chosen random, not real)
Signed-off-by: NHari Bathini <hbathini@linux.ibm.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-8-hbathini@linux.ibm.com

On PPC64 with KUAP enabled, any kernel code which wants to
access userspace needs to be surrounded by disable-enable KUAP.
But that is not happening for BPF_PROBE_MEM load instruction.
So, when BPF program tries to access invalid userspace address,
page-fault handler considers it as bad KUAP fault:

  Kernel attempted to read user page (d0000000) - exploit attempt? (uid: 0)

Considering the fact that PTR_TO_BTF_ID (which uses BPF_PROBE_MEM
mode) could either be a valid kernel pointer or NULL but should
never be a pointer to userspace address, execute BPF_PROBE_MEM load
only if addr is kernel address, otherwise set dst_reg=0 and move on.

This will catch NULL, valid or invalid userspace pointers. Only bad
kernel pointer will be handled by BPF exception table.

[Alexei suggested for x86]
Suggested-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NHari Bathini <hbathini@linux.ibm.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-7-hbathini@linux.ibm.com

BPF load instruction with BPF_PROBE_MEM mode can cause a fault
inside kernel. Append exception table for such instructions
within BPF program.

Unlike other archs which uses extable 'fixup' field to pass dest_reg
and nip, BPF exception table on PowerPC follows the generic PowerPC
exception table design, where it populates both fixup and extable
sections within BPF program. fixup section contains two instructions,
first instruction clears dest_reg and 2nd jumps to next instruction
in the BPF code. extable 'insn' field contains relative offset of
the instruction and 'fixup' field contains relative offset of the
fixup entry. Example layout of BPF program with extable present:

             +------------------+
             |                  |
             |                  |
   0x4020 -->| ld   r27,4(r3)   |
             |                  |
             |                  |
   0x40ac -->| lwz  r3,0(r4)    |
             |                  |
             |                  |
             |------------------|
   0x4280 -->| li  r27,0        |  \ fixup entry
             | b   0x4024       |  /
   0x4288 -->| li  r3,0         |
             | b   0x40b0       |
             |------------------|
   0x4290 -->| insn=0xfffffd90  |  \ extable entry
             | fixup=0xffffffec |  /
   0x4298 -->| insn=0xfffffe14  |
             | fixup=0xffffffec |
             +------------------+

   (Addresses shown here are chosen random, not real)
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NHari Bathini <hbathini@linux.ibm.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-6-hbathini@linux.ibm.com

Define and use PPC_RAW_BRANCH() macro instead of open coding it. This
macro is used while adding BPF_PROBE_MEM support.
Signed-off-by: NHari Bathini <hbathini@linux.ibm.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-5-hbathini@linux.ibm.com

Refactor powerpc LDX JITing code to simplify adding BPF_PROBE_MEM
support.
Signed-off-by: NHari Bathini <hbathini@linux.ibm.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-4-hbathini@linux.ibm.com

In case of extra_pass, usual JIT passes are always skipped. So,
extra_pass is always false while calling bpf_jit_build_body() and
can be removed.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-3-hbathini@linux.ibm.com

SEEN_STACK is unused on PowerPC. Remove it. Also, have
SEEN_TAILCALL use 0x40000000.
Signed-off-by: NRavi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: NChristophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211012123056.485795-2-hbathini@linux.ibm.com

The EEH recovery logic in eeh_handle_normal_event() has some pretty strange
flow control. If we remove all the actual recovery logic we're left with
the following skeleton:

	if (result != PCI_ERS_RESULT_DISCONNECT) {
		...
	}

	if (result != PCI_ERS_RESULT_DISCONNECT) {
		...
	}

	if (result == PCI_ERS_RESULT_NONE) {
		...
	}

	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
		...
	}

	if (result == PCI_ERS_RESULT_CAN_RECOVER) {
		...
	}

	if (result == PCI_ERS_RESULT_NEED_RESET) {
		...
	}

	if ((result == PCI_ERS_RESULT_RECOVERED) ||
	    (result == PCI_ERS_RESULT_NONE)) {
		...
		goto out;
	}

	/*
	 * unsuccessful recovery / PCI_ERS_RESULT_DISCONECTED
	 * handling is here.
	 */
	...

	out:
	...

Most of the "if () { ... }" blocks above change "result" to
PCI_ERS_RESULT_DISCONNECTED if an error occurs in that recovery step. This
makes the control flow a bit confusing since it breaks the early-exit
pattern that is generally used in Linux. In any case we end up handling the
error in the final else block so why not just jump there directly? Doing so
also allows us to de-indent a bunch of code.

No functional changes.

[dja: rebase on top of linux-next + my preceeding refactor,
      move clearing the EEH_DEV_NO_HANDLER bit above the first goto so that
      it is always clear in the error handler code as it was before.]
Signed-off-by: NOliver O'Halloran <oohall@gmail.com>
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015070628.1331635-2-dja@axtens.net

The control flow of eeh_handle_normal_event() is a bit tricky.

Break out one of the error handling paths - rather than be in an else
block, we'll make it part of the regular body of the function and put a
'goto out;' in the true limb of the if.
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211015070628.1331635-1-dja@axtens.net

On POWER10, the automatic "save & restore" of interrupt context is
always available. Provide a way to deactivate it for tests or
performance.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-11-clg@kaod.org

StoreEOI is activated by default on platforms supporting the feature
(POWER10) and will be used as soon as firmware advertises its
availability. The kernel parameter provides a way to deactivate its
use. It can be still be reactivated through debugfs.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-10-clg@kaod.org

It can be used to deactivate temporarily StoreEOI for tests or
performance on platforms supporting the feature (POWER10)
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-9-clg@kaod.org

The XIVE driver under Linux uses a single interrupt priority and only
one event queue is configured per CPU. Expose the contents under
a 'xive/eqs/cpuX' debugfs file.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-8-clg@kaod.org

and remove the EQ entries output which is not very useful since only
the next two events of the queue are taken into account. We will
improve the dump of the EQ in the next patches.
Signed-off-by: NCédric Le Goater <clg@kaod.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211105102636.1016378-7-clg@kaod.org