Manish Rangankar says:

====================
Add QLogic FastLinQ iSCSI (qedi) driver.

This series introduces hardware offload iSCSI initiator driver for the
41000 Series Converged Network Adapters (579xx chip) by Qlogic. The overall
driver design includes a common module ('qed') and protocol specific
dependent modules ('qedi' for iSCSI).

This is an open iSCSI driver, modifications to open iSCSI user components
'iscsid', 'iscsiuio', etc. are required for the solution to work. The user
space changes are also in the process of being submitted.

    https://groups.google.com/forum/#!forum/open-iscsi

The 'qed' common module, under drivers/net/ethernet/qlogic/qed/, is
enhanced with functionality required for the iSCSI support. This series
is based on:

    net tree base: Merge of net and net-next as of 11/29/2016

Changes from RFC v2:

  1. qedi patches are squashed into single patch to prevent krobot
     warning.
  2. Fixed 'hw_p_cpuq' incompatible pointer type.
  3. Fixed sparse incompatible types in comparison expression.
  4. Misc fixes with latest 'checkpatch --strict' option.
  5. Remove int_mode option from MODULE_PARAM.
  6. Prefix all MODULE_PARAM params with qedi_*.
  7. Use CONFIG_QED_ISCSI instead of CONFIG_QEDI
  8. Added bad task mem access fix.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds out of order packet handling for hardware offloaded
iSCSI. Out of order packet handling requires driver buffer allocation
and assistance.
Signed-off-by: NArun Easi <arun.easi@cavium.com>
Signed-off-by: NYuval Mintz <yuval.mintz@cavium.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This adds the backbone required for the various HW initalizations
which are necessary for the iSCSI driver (qedi) for QLogic FastLinQ
4xxxx line of adapters - FW notification, resource initializations, etc.
Signed-off-by: NArun Easi <arun.easi@cavium.com>
Signed-off-by: NYuval Mintz <yuval.mintz@cavium.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinecke <hare@suse.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is already using the %pM printf extension; might as well also use
%ph to make the code smaller.
Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When CONFIG_INET is disabled, the new selftest results in a link
error:

drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.o: In function `mlx5e_test_loopback':
en_selftest.c:(.text.mlx5e_test_loopback+0x2ec): undefined reference to `ip_send_check'
en_selftest.c:(.text.mlx5e_test_loopback+0x34c): undefined reference to `udp4_hwcsum'

This hides the specific test in that configuration.

Fixes: 0952da79 ("net/mlx5e: Add support for loopback selftest")
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After 326fe02d ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"),
the rcu_read_lock() in bpf_prog_run_xdp() is superfluous, since callers
need to hold rcu_read_lock() already to make sure BPF program doesn't
get released in the background.

Thus, drop it from bpf_prog_run_xdp(), as it can otherwise be misleading.
Still keeping the bpf_prog_run_xdp() is useful as it allows for grepping
in XDP supported drivers and to keep the typecheck on the context intact.
For mlx4, this means we don't have a double rcu_read_lock() anymore. nfp can
just make use of bpf_prog_run_xdp(), too. For qede, just move rcu_read_lock()
out of the helper. When the driver gets atomic replace support, this will
move to call-sites eventually.

mlx5 needs actual fixing as it has the same issue as described already in
326fe02d ("net/mlx4_en: protect ring->xdp_prog with rcu_read_lock"),
that is, we're under RCU bh at this time, BPF programs are released via
call_rcu(), and call_rcu() != call_rcu_bh(), so we need to properly mark
read side as programs can get xchg()'ed in mlx5e_xdp_set() without queue
reset.

Fixes: 86994156 ("net/mlx5e: XDP fast RX drop bpf programs support")
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Only when ICMP packets are enqueued onto the error queue,
sk_err is also set. Before f5f99309 (sock: do not set sk_err
in sock_dequeue_err_skb), a subsequent error queue read
would set sk_err to the next error on the queue, or 0 if empty.
As no error types other than ICMP set this field, sk_err should
not be modified upon dequeuing them.

Only for ICMP errors, reset the (racy) sk_err. Some applications,
like traceroute, rely on it and go into a futile busy POLLERR
loop otherwise.

In principle, sk_err has to be set while an ICMP error is queued.
Testing is_icmp_err_skb(skb_next) approximates this without
requiring a full queue walk. Applications that receive both ICMP
and other errors cannot rely on this legacy behavior, as other
errors do not set sk_err in the first place.

Fixes: f5f99309 (sock: do not set sk_err in sock_dequeue_err_skb)
Signed-off-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NEric Dumazet <edumazet@google.com>
Acked-by: NMaciej Żenczykowski <maze@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Thomas Graf says:

====================
bpf: BPF for lightweight tunnel encapsulation

This series implements BPF program invocation from dst entries via the
lightweight tunnels infrastructure. The BPF program can be attached to
lwtunnel_input(), lwtunnel_output() or lwtunnel_xmit() and see an L3
skb as context. Programs attached to input and output are read-only.
Programs attached to lwtunnel_xmit() can modify and redirect, push headers
and redirect packets.

The facility can be used to:
 - Collect statistics and generate sampling data for a subset of traffic
   based on the dst utilized by the packet thus allowing to extend the
   existing realms.
 - Apply additional per route/dst filters to prohibit certain outgoing
   or incoming packets based on BPF filters. In particular, this allows
   to maintain per dst custom state across multiple packets in BPF maps
   and apply filters based on statistics and behaviour observed over time.
 - Attachment of L2 headers at transmit where resolving the L2 address
   is not required.
 - Possibly many more.

v3 -> v4:
 - Bumped LWT_BPF_MAX_HEADROOM from 128 to 256 (Alexei)
 - Renamed bpf_skb_push() helper to bpf_skb_change_head() to relate to
   existing bpf_skb_change_tail() helper (Alexei/Daniel)
 - Added check in __bpf_redirect_common() to verify that program added a
   link header before redirecting to a l2 device. Adding the check to
   lwt-bpf code was considered but dropped due to massive code required
   due to retrieval of net_device via per-cpu redirect buffer. A test
   case was added to cover the scenario when a program directs to an l2
   device without adding an appropriate l2 header.
   (Alexei)
 - Prohibited access to tc_classid (Daniel)
 - Collapsed bpf_verifier_ops instance for lwt in/out as they are
   identical (Daniel)
 - Some cosmetic changes

v2 -> v3:
 - Added real world sample lwt_len_hist_kern.c which demonstrates how to
   collect a histogram on packet sizes for all packets flowing through
   a number of routes.
 - Restricted output to be read-only. Since the header can no longer
   be modified, the rerouting functionality has been removed again.
 - Added test case which cover destructive modification of packet data.

v1 -> v2:
 - Added new BPF_LWT_REROUTE return code for program to indicate
   that new route lookup should be performed. Suggested by Tom.
 - New sample to illustrate rerouting
 - New patch 05: Recursion limit for lwtunnel_output for the case
   when user creates circular dst redirection. Also resolves the
   issue for ILA.
 - Fix to ensure headroom for potential future L2 header is still
   guaranteed
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Adds a series of tests to verify the functionality of attaching
BPF programs at LWT hooks.

Also adds a sample which collects a histogram of packet sizes which
pass through an LWT hook.

$ ./lwt_len_hist.sh
Starting netserver with host 'IN(6)ADDR_ANY' port '12865' and family AF_UNSPEC
MIGRATED TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.253.2 () port 0 AF_INET : demo
Recv   Send    Send
Socket Socket  Message  Elapsed
Size   Size    Size     Time     Throughput
bytes  bytes   bytes    secs.    10^6bits/sec

 87380  16384  16384    10.00    39857.69
       1 -> 1        : 0        |                                      |
       2 -> 3        : 0        |                                      |
       4 -> 7        : 0        |                                      |
       8 -> 15       : 0        |                                      |
      16 -> 31       : 0        |                                      |
      32 -> 63       : 22       |                                      |
      64 -> 127      : 98       |                                      |
     128 -> 255      : 213      |                                      |
     256 -> 511      : 1444251  |********                              |
     512 -> 1023     : 660610   |***                                   |
    1024 -> 2047     : 535241   |**                                    |
    2048 -> 4095     : 19       |                                      |
    4096 -> 8191     : 180      |                                      |
    8192 -> 16383    : 5578023  |************************************* |
   16384 -> 32767    : 632099   |***                                   |
   32768 -> 65535    : 6575     |                                      |
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Registers new BPF program types which correspond to the LWT hooks:
  - BPF_PROG_TYPE_LWT_IN   => dst_input()
  - BPF_PROG_TYPE_LWT_OUT  => dst_output()
  - BPF_PROG_TYPE_LWT_XMIT => lwtunnel_xmit()

The separate program types are required to differentiate between the
capabilities each LWT hook allows:

 * Programs attached to dst_input() or dst_output() are restricted and
   may only read the data of an skb. This prevent modification and
   possible invalidation of already validated packet headers on receive
   and the construction of illegal headers while the IP headers are
   still being assembled.

 * Programs attached to lwtunnel_xmit() are allowed to modify packet
   content as well as prepending an L2 header via a newly introduced
   helper bpf_skb_change_head(). This is safe as lwtunnel_xmit() is
   invoked after the IP header has been assembled completely.

All BPF programs receive an skb with L3 headers attached and may return
one of the following error codes:

 BPF_OK - Continue routing as per nexthop
 BPF_DROP - Drop skb and return EPERM
 BPF_REDIRECT - Redirect skb to device as per redirect() helper.
                (Only valid in lwtunnel_xmit() context)

The return codes are binary compatible with their TC_ACT_
relatives to ease compatibility.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A route on the output path hitting a RTN_LOCAL route will keep the dst
associated on its way through the loopback device. On the receive path,
the dst_input() call will thus invoke the input handler of the route
created in the output path. Thus, lwt redirection for input must be done
for dsts allocated in the otuput path as well.

Also, if a route is cached in the input path, the allocated dst should
respect lwtunnel configuration on the nexthop as well.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

orig_output for IPv4 was only set for dsts which hit an input route.
Set it consistently for locally generated traffic as well to allow
lwt to continue the dst_output() path as configured by the nexthop.

Fixes: 25368623 ("lwt: Add support to redirect dst.input")
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox 100G mlx5 updates 2016-11-29

The following series from Tariq and Roi, provides some critical fixes
and updates for the mlx5e driver.

From Tariq:
 - Fix driver coherent memory huge allocation issues by fragmenting
   completion queues, in a way that is transparent to the netdev driver by
   providing a new buffer type "mlx5_frag_buf" with the same access API.
 - Create UMR MKey per RQ to have better scalability.

From Roi:
 - Some fixes for the encap-decap support and tc flower added lately to the
   mlx5e driver.

v1->v2:
 - Fix start index in error flow of mlx5_frag_buf_alloc_node, pointed out by Eric.

This series was generated against commit:
31ac1c19 ("geneve: fix ip_hdr_len reserved for geneve6 tunnel.")
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Handling flow encap entry should be inside tc del flow
and is only relevant for offloaded eswitch TC rules.

Fixes: 11a457e9b6c1 ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change the function that deletes offloaded TC rule to get
struct mlx5e_tc_flow instance which contains both the flow
handle and flow attributes. This is a cleanup needed for
downstream patches, it doesn't change any functionality.
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

According to the reverse unwinding principle, on delete time we should
first handle deletion of the steering rule and later handle the vlan
deletion from the eswitch.

Fixes: 8b32580d ("net/mlx5e: Add TC vlan action for SRIOV offloads")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We will never find a flow with the same cookie as cls_flower always
allocates a new flow and the cookie is the allocated memory address.

Fixes: e3a2b7ed ("net/mlx5e: Support offload cls_flower with drop action")
Signed-off-by: NRoi Dayan <roid@mellanox.com>
Reviewed-by: NHadar Hen Zion <hadarh@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In Striding RQ implementation, we used a single UMR
(User-Mode Memory Registration) memory key for all RQs.
When the product of RQs number*size gets high, we hit a
limitation of u16 field size in FW.

Here we move to using a UMR memory key per RQ, so we can
scale to any number of rings, with the maximum buffer
size in each.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In next patch we are going to create a UMR MKey per RQ, we need
mlx5e_create_umr_mkey declared before mlx5e_create_rq.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new type of struct mlx5_frag_buf which is used to allocate fragmented
buffers rather than contiguous, and make the Completion Queues (CQs) use
it as they are big (default of 2MB per CQ in Striding RQ).

This fixes the failures of type:
"mlx5e_open_locked: mlx5e_open_channels failed, -12"
due to dma_zalloc_coherent insufficient contiguous coherent memory to
satisfy the driver's request when the user tries to setup more or larger
rings.
Signed-off-by: NTariq Toukan <tariqt@mellanox.com>
Reported-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Neill Whillans says:

====================
net: Add support for SGMII PCS on Altera TSE MAC

These patches were created as part of work to add support for SGMII
PCS functionality to the Altera TSE MAC. Patches are based on 4.9-rc6
git tree.

The first patch in the series adds support for the VSC8572 dual-port
Gigabit Ethernet transceiver, used in integration testing.

The second patch adds support for the SGMII PCS functionality to the
Altera TSE driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the (optional) SGMII PCS functionality of the Altera
TSE MAC. If the phy-mode is set to 'sgmii' then we attempt to discover
and initialise the PCS so that the MAC can communicate to the PHY.

The PCS IP block provides a scratch register for testing presence of
the PCS, which is mapped into one of the two MDIO spaces present in
the MAC's register space.  Once we have determined that the scratch
register is functioning, we attempt to initialise the PCS to
auto-negotiate an SGMII link with the PHY. There is no need to monitor
or manage the SGMII link beyond this, since the normal PHY MDIO will
then be used to monitor the media layer.

The Altera TSE MAC has only one way in which it can be configured with an
SGMII PCS, and as such, this patch only looks to the phy-mode to select
whether or not to attempt to initialise the PCS registers.  During
initialisation, we report the PCS's equivalent of a PHY ID register.
This can be parameterised during the IP instantiation and is often left
as '0x00000000' which is not an error.
Signed-off-by: NNeill Whillans <neill.whillans@codethink.co.uk>
Reviewed-by: NDaniel Silverstone <daniel.silverstone@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add support for the Vitesse VSC8572 which is functionally equivalent to
the already supported VSC8574. As such, all the same handling functions
are used since the VSC8572 merely has half the number of phy blocks
internally.
Signed-off-by: NStephen Agate <stephen.agate@uk.thalesgroup.com>
Signed-off-by: NNeill Whillans <neill.whillans@codethink.co.uk>
Reviewed-by: NDaniel Silverstone <daniel.silverstone@codethink.co.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Edward Cree says:

====================
sfc: defalconisation fixups

A bug fix, the Kconfig change, and cleaning up a bit more unused code.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's no longer used now that Falcon is gone.

Also remove a reference in a comment to an ioctl that doesn't exist.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Easy enough for Falcon users to enable it when making oldconfig.
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Defalconisation removed one of the string arguments, but missed the
 corresponding %s.

Fixes: 5a6681e2 ("sfc: separate out SFC4000 ("Falcon") support into new sfc-falcon driver")
Signed-off-by: NEdward Cree <ecree@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before this patch, function ndo_dflt_fdb_dump() will always return code
from uc fdb dump. The reture code of mc fdb dump is lost.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

netlink kernel socket is protected by refcount, not RCU.
Its rcv path is neither protected by RCU. So the synchronize_net()
is just pointless.

Cc: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Raju Lakkaraju says:

====================
Adding PHY MDI(X) support

I updated all review comments which were given by Andrew and Florian.

This series add support for PHY MDI(X), and implement it for MSCC phys.

Tested on Beaglebone Black with VSC 8531 PHY.

Change set:
v1:
- Initial patch submit the WoL and MDI-X in single set of patches

v2:
- Split the mdi(x) as signal set of patches.
- Remove the out_unlock as suggested by Andrew.
- Add mdix_ctrl parameter in "phy_device" to handle the user configure
  mdi(x). Proposed implementation accepted by Florian.
- phydev->mdix_ctrl initialize with ETH_TP_MDI_AUTO. Ethernet controller
  never initialize this parameter.
- Fix the mdix changes in marvell and microchip driver.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

PHY drivers to have an eth_tp_mdix_ctrl to indicate what is the configured
MDI setting, and read eth_tp_mdi to indicate what is the current status,

Add new parameter mdix_ctrl in phy_device structure and fix driver.
Signed-off-by: NRaju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To connect two ports of the same configuration (MDI to MDI or
MDI-X to MDI-X) with a 10/100/1000 Mbit/s connection, an
Ethernet crossover cable is needed to cross over the transmit
and receive signals in the cable, so that they are matched at
the connector level.
When connecting an MDI port to an MDI-X port a straight through
cable is used while to connect two MDI ports or two MDI-X ports
a crossover cable must be used. Conventionally MDI is used on end
devices while MDI-X is used on hubs and switches

Auto MDI-X automatically detects the required cable connection
type and configures the connection appropriately, removing the
need for crossover cables to interconnect switches or connecting
PCs peer-to-peer.
Signed-off-by: NRaju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update the mdix and mdix_ctrl with corresponding ethtool configuration
parameters.
Signed-off-by: NRaju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add new parameter mdix_ctrl to hold the user configuration.
Existing mdix maintain the current status of MDI(X) crossover performed or
not.
mdix_ctrl can configure either ETH_TP_MDI or ETH_TP_MDI_X orETH_TP_MDI_AUTO.
Signed-off-by: NRaju Lakkaraju <Raju.Lakkaraju@microsemi.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The mtu_adj is initialized to zero when alloc mem, there is no any
assignment to mtu_adj. It is only used in ipvlan_adjust_mtu as one
right value.
So it is useless member of struct ipvl_dev, then remove it.
Signed-off-by: NGao Feng <fgao@ikuai8.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In alloc_cmd_box(), pci_pool_alloc() followed by memset will be
replaced by pci_pool_zalloc()
Signed-off-by: NSouptick joarder <jrdr.linux@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In mlx4_alloc_cmd_mailbox(), pci_pool_alloc() followed by memset will be
replaced by pci_pool_zalloc()
Signed-off-by: NSouptick joarder <jrdr.linux@gmail.com>
Reviewed-by: NYuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: NTariq Toukan <tariqt@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit e2d118a1 ("net: inet: Support UID-based routing in IP
protocols.") made __build_flow_key call sock_net(sk) to determine
the network namespace of the passed-in socket. This crashes if sk
is NULL.

Fix this by getting the network namespace from the skb instead.

Fixes: e2d118a1 ("net: inet: Support UID-based routing in IP protocols.")
Reported-by: NErez Shitrit <erezsh@dev.mellanox.co.il>
Signed-off-by: NLorenzo Colitti <lorenzo@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a test to verify that

bpf: fix states equal logic for varlen access

actually fixed the problem.  The problem was if the register we added to our map
register was UNKNOWN in both the false and true branches and the only thing that
changed was the range then we'd incorrectly assume that the true branch was
valid, which it really wasnt.  This tests this case and properly fails without
my fix in place and passes with it in place.
Signed-off-by: NJosef Bacik <jbacik@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Ivan Khoronzhuk says:

====================
cpsw: add per channel shaper configuration

This series is intended to allow user to set rate for per channel
shapers at cpdma level. This patchset doesn't have impact on performance.
The rate can be set with:

echo 100 > /sys/class/net/ethX/queues/tx-0/tx_maxrate

Tested on am572xx
Based on net-next/master
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>