collect_config() collect all config key-value pairs from config files
and put each config info in config set.  But if config set (i.e. 'set'
variable at collect_config()) is NULL, this is wrong so handle it.
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1465210380-26749-4-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If a config file has wrong key-value pairs, the perf process will be
forcibly terminated by die() at perf_parse_file() called by
perf_config() so terminal settings can be crushed because of unusual
termination.

For example:

If user config file has a wrong value 'red;default' instead of a normal
value like 'red, default' for a key 'colors.top',

    # cat ~/.perfconfig
    [colors]
        medium = red;default # wrong value

and if running sub-command 'top',

    # perf top

perf process is dead by force and terminal setting is broken
with a messge like below.

    Fatal: bad config file line 2 in /root/.perfconfig

So fix it.
If perf_config() can return on failure without calling die()
at perf_parse_file(), this problem can be solved.
And if a config file has wrong values, show the error message
and then use default config values instead of wrong config values.
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1465210380-26749-2-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When in CSV mode --metric-only outputs an header, unlike the other
modes. Previously it did not properly print headers for the aggregation
columns, so the headers were actually shifted against the real values.

Fix this here by outputting the correct headers for CSV.

v2: Indent array.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-4-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

When --metric-only is enabled there were no headers for the topology in
interval mode.  Also when headers were printed they were on a separate
line.

Before:

  $ perf stat  --metric-only  -A -I 1000 -a
    1.001038376     frontend cycles idle insn per cycle  stalled cycles per insn branch-misses of all branches
    1.001038376 CPU0   123.54%               0.23           5.29                    7.61%
    1.001038376 CPU1   137.78%               0.24           5.13                   10.07%
    1.001038376 CPU2    64.48%               0.22           5.50                    6.84%

After:

  $ perf stat  --metric-only  -A -I 1000 -a
    1.001111114 CPU0    82.46%               0.32           2.60                    7.64%
    1.001111114 CPU1   126.63%               0.02          42.83                    0.15%
    1.001111114 CPU2   193.54%               0.32           2.59                    6.92%

v2: Move all headers on a single line
Reported-by: NJiri Olsa <jolsa@kernel.org>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-3-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Implement the TopDown formulas in 'perf stat'. The topdown basic metrics
reported by the kernel are collected, and the formulas are computed and
output as normal metrics.

See the kernel commit exporting the events for details on the used
metrics.

Committer note:

Output example:

  # perf stat --topdown -a usleep 1

   Performance counter stats for 'system wide':

             retiring     bad speculation   frontend bound   backend bound
  S0-C0    2     23.8%       11.6%            28.3%           36.3%
  S0-C1    2     16.2%       15.7%            36.5%           31.6%

         0.000579956 seconds time elapsed
  #

v2: Always print all metrics, only use thresholds for coloring.
v3: Mark retiring over threshold green, not red.
v4: Only print one decimal digit
    Fix color printing of one metric
v5: Avoid printing -0.0
v6: Remove extra frontend event lookup
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-2-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Add basic plumbing for TopDown in perf stat

TopDown is intended to replace the frontend cycles idle/ backend cycles
idle metrics in standard perf stat output.  These metrics are not
reliable in many workloads, due to out of order effects.

This implements a new --topdown mode in perf stat (similar to
--transaction) that measures the pipe line bottlenecks using
standardized formulas. The measurement can be all done with 5 counters
(one fixed counter)

The result are four metrics:

FrontendBound, BackendBound, BadSpeculation, Retiring

that describe the CPU pipeline behavior on a high level.

The full top down methology has many hierarchical metrics.  This
implementation only supports level 1 which can be collected without
multiplexing. A full implementation of top down on top of perf is
available in pmu-tools toplev.  (http://github.com/andikleen/pmu-tools)

The current version works on Intel Core CPUs starting with Sandy Bridge,
and Atom CPUs starting with Silvermont.  In principle the generic
metrics should be also implementable on other out of order CPUs.

TopDown level 1 uses a set of abstracted metrics which are generic to
out of order CPU cores (although some CPUs may not implement all of
them):

  topdown-total-slots       Available slots in the pipeline
  topdown-slots-issued      Slots issued into the pipeline
  topdown-slots-retired     Slots successfully retired
  topdown-fetch-bubbles     Pipeline gaps in the frontend
  topdown-recovery-bubbles  Pipeline gaps during recovery
                            from misspeculation

These metrics then allow to compute four useful metrics:

FrontendBound, BackendBound, Retiring, BadSpeculation.

Add a new --topdown options to enable events.  When --topdown is
specified set up events for all topdown events supported by the kernel.
Add topdown-* as a special case to the event parser, as is needed for
all events containing -.

The actual code to compute the metrics is in follow-on patches.

v2: Use standard sysctl read function.
v3: Move x86 specific code to arch/
v4: Enable --metric-only implicitly for topdown.
v5: Add --single-thread option to not force per core mode
v6: Fix output order of topdown metrics
v7: Allow combining with -d
v8: Remove --single-thread again
v9: Rename functions, adding arch_ and topdown_.
v10: Expand man page and describe TopDown better
Paste intro into commit description.
Print error when malloc fails.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Acked-by: NJiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464119559-17203-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

'perf test' tries to parse all entries in /sys/devices/cpu/events/.
Ignore the special entries like '.scale', which cannot be directly
parsed as an event. This patch assumes all files containing a '.' are
special and can be ignored.
Reported-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1465223766-29902-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's a display inconsistency when there are multiple tracepoint
events, some of which have the 'call-graph' config option set but the
first one hasn't, i.e. the whole logic for call graph processing is
enabled only if the first tracepoint event has call-graph set.

For instance, if we record signal_deliver with call-graph and
signal_generate without:

  $ perf record -g -a -e signal:signal_deliver -e signal:signal_generate/call-graph=no/

  [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]

  $ perf script

  kworker/u2:1    13 [000]  6563.875949: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1313 grp=1 res=0 ff61cc __send_signal+0x3ec ([kernel.kallsyms])
  perf  1313 [000]  6563.877584:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000
              7ffff314 get_signal+0x80007f0023a4 ([kernel.kallsyms])
              7fffe358 do_signal+0x80007f002028 ([kernel.kallsyms])
              7fffa5e8 exit_to_usermode_loop+0x80007f002053 ([kernel.kallsyms])
              ...

Then we exchange the order of these two events in commandline, and keep
signal_generate without call-graph.

  $ perf record -g -a -e signal:signal_generate/call-graph=no/ -e signal:signal_deliver

  [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]

  $ perf script

    kworker/u2:2  1314 [000]  6933.353060: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1321 grp=1 res=0
            perf  1321 [000]  6933.353872:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000

This time, the callchain of the event signal_deliver disappeared. The
problem is caused by that perf only checks for the first evsel in evlist
and decides if callchain should be printed.

This patch traverses all evsels in evlist to see if any of them have
callchains, and shows the right result:

  $ perf script

  kworker/u2:2  1314 [000]  6933.353060: signal:signal_generate: sig=2 errno=0 code=128 comm=perf pid=1321 grp=1 res=0 ff61cc __send_signal+0x3ec ([kernel.kallsyms])
  perf  1321 [000]  6933.353872:  signal:signal_deliver: sig=2 errno=0 code=128 sa_handler=43115e sa_flags=14000000
              7ffff314 get_signal+0x80007f0023a4 ([kernel.kallsyms])
              7fffe358 do_signal+0x80007f002028 ([kernel.kallsyms])
              7fffa5e8 exit_to_usermode_loop+0x80007f002053 ([kernel.kallsyms])
              ...
Signed-off-by: NHe Kuang <hekuang@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1463374279-97209-1-git-send-email-hekuang@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

This fixes cross compilation of libapi.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel@pengutronix.de
Cc: patchwork-lst@pengutronix.de
Link: http://lkml.kernel.org/r/1458235670-27341-1-git-send-email-l.stach@pengutronix.deSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

If zalloc fail, setting evlist->mmap[i].fd is unsafe and
perf_evlist__alloc_mmap() should bail out right after that.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Acked-by: NMasami Hiramatsu <mhiramat@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Fixes: d4c6fb36 ("perf evsel: Record fd into perf_mmap")
Link: http://lkml.kernel.org/r/1464699975-230440-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Out of perf_evsel__intval(), that requires passing the variable name,
that will then be searched in the list of tracepoint variables for the
given evsel.

In cases such as syscall file descriptor ("fd") tracking, this is
wasteful, we need just to use perf_evsel__field() and cache the
format_field.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-r6f89jx9j5nkx037d0naviqy@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now that we have topology_max_smt_threads() use it
to detect the HT workarounds for older CPUs.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-6-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add topdown event declarations to Silvermont / Airmont.
These cores do not support the full Top Down metrics, but an useful
subset (FrontendBound, Retiring, Backend Bound/Bad Speculation).

The perf stat tool automatically handles the missing events
and combines the available metrics.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-5-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add declarations for the events needed for topdown to the
Intel big core CPUs starting with Sandy Bridge. We need
to report different values if HyperThreading is on or off.

The only thing this patch does is to export some events
in sysfs.

topdown level 1 uses a set of abstracted metrics which
are generic to out of order CPU cores (although some
CPUs may not implement all of them):

topdown-total-slots	  Available slots in the pipeline
topdown-slots-issued	  Slots issued into the pipeline
topdown-slots-retired	  Slots successfully retired
topdown-fetch-bubbles	  Pipeline gaps in the frontend
topdown-recovery-bubbles  Pipeline gaps during recovery
			  from misspeculation

A slot is a single operation in the CPU pipe line.

These metrics then allow to compute four useful metrics:
FrontendBound, BackendBound, Retiring, BadSpeculation.

The formulas to compute the metrics are generic, they
only change based on the availability on the abstracted
input values.

The kernel declares the events supported by the current
CPU and their scaling factors (such as the pipeline width)
and perf stat then computes the formulas based on the
available metrics.  This is similar how existing
perf metrics, such as TSC metrics or IPC, are implemented.

This abstracts all CPU pipe line specific knowledge in the
kernel driver, but still avoids the need for larger scale perf
interface changes.

For HyperThreading the any bit is needed to get accurate
values when both threads are executing. This implies that
the events can only be collected as root or with
perf_event_paranoid=-1 for now.

The basic scheme is based on the following paper:
  Yasin, A Top Down Method for Performance analysis and Counter architecture ISPASS14 (pdf available via google)
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-4-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add a way to show different sysfs events attributes depending on
HyperThreading is on or off. This is difficult to determine
early at boot, so we just do it dynamically when the sysfs
attribute is read.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-3-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

For SMT specific workarounds it is useful to know if SMT is active
on any online CPU in the system. This currently requires a loop
over all online CPUs.

Add a global variable that is updated with the maximum number
of smt threads on any CPU on online/offline, and use it for
topology_max_smt_threads()

The single call is easier to use than a loop.

Not exported to user space because user space already can use
the existing sibling interfaces to find this out.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1463703002-19686-2-git-send-email-andi@firstfloor.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

This allows (with a previous change to the perf error return ABI) for
calling out in userspace the exact reason for perf record failing
when PMU doesn't support overflow interrupts.

Note that this needs to be put ahead of existing precise_ip check as
that gets hit otherwise for the sampling fail case as well.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <acme@redhat.com>
Cc: <linux-snps-arc@lists.infradead.org>
Cc: <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/1462786660-2900-2-git-send-email-vgupta@synopsys.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Change the return code for sampling event not supported from -ENOTSUPP
to -EOPNOTSUPP.

This allows userspace to identify this case specifically, instead of
printing the catch-all error message it did previously.

Technically this is an ABI change, but we think we can get away
with it.

Old behavior:
 -------
 | # perf record ls
 | Error:
 | The sys_perf_event_open() syscall returned with 524 (Unknown error 524)
 | for event (cycles:ppp).
 | /bin/dmesg may provide additional information.
 | No CONFIG_PERF_EVENTS=y kernel support configured?

New behavior:
 -------
 | # perf record ls
 | Error:
 | PMU Hardware doesn't support sampling/overflow-interrupts.
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <acme@redhat.com>
Cc: <linux-snps-arc@lists.infradead.org>
Cc: <vincent.weaver@maine.edu>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Link: http://lkml.kernel.org/r/1462786660-2900-3-git-send-email-vgupta@synopsys.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Some platforms, e.g. Knights Landing, use a common PCI device ID for
multiple instances of an uncore PMU device type. So it is impossible to
locate the specific instances only by PCI device ID.

The current code specially handles Knights Landing by arbitrarily pointing
an instance to an unused uncore box. However, we still have no idea
which uncore device is mapped to which box.

Furthermore, there could be more platforms which use a common PCI device ID
for uncore devices. We have to specially handle them one by one.

This patch records full device information (slot, func, and device ID)
in id_table[]. So the probe function can point the instance to a specific
uncore box by checking the full device information.
Tested-by: NLukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: tglx@linutronix.de
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: bp@suse.de
Cc: harish.chegondi@intel.com
Cc: hubert.chrzaniuk@intel.com
Cc: lawrence.f.meadows@intel.com
Link: http://lkml.kernel.org/r/1463379504-39003-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Due to change in register definition we need to update OCR mask:

MSR_OFFCORE_RESP0 reserved bits: 3,4,18,29,30,33,34, 8,11,14
MSR_OFFCORE_RESP1 reserved bits: 3,4,18,29,30,33,34, 38
Reported-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NLukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: kan.liang@intel.com
Cc: lukasz.anaczkowski@intel.com
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/1463433419-16893-1-git-send-email-lukasz.odzioba@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Add the 'static' keyword to intel_bdw_event_constraints[], snb_events_attrs[],
nhm_events_attrs[] and intel_skl_event_constraints arrays[], because
they are only used locally.
Signed-off-by: NLukasz Odzioba <lukasz.odzioba@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: akpm@linux-foundation.org
Cc: hpa@zytor.com
Cc: kan.liang@intel.com
Cc: lukasz.anaczkowski@intel.com
Cc: zheng.z.yan@intel.com
Link: http://lkml.kernel.org/r/1463433378-16816-1-git-send-email-lukasz.odzioba@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch fixes an issue which was introduced by commit:

  91a612ee ("perf/core: Fix dynamic interrupt throttle")

... which commit unconditionally sets the perf_sample_allowed_ns value
to !0. But that could trigger a bug in the following corner case:

The user can disable the dynamic interrupt throttle mechanism by setting
perf_cpu_time_max_percent to 0. Then they change perf_event_max_sample_rate.
For this case, the mechanism will be enabled implicitly, because
perf_sample_allowed_ns becomes !0 - which is not what we want.

This patch only updates perf_sample_allowed_ns when the dynamic
interrupt throttle mechanism is enabled.
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1462260366-3160-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

perf/core: Rename the perf_event_aux*() APIs to perf_event_sb*(), to separate them from AUX ring-buffer records

There are now two different things called AUX in perf, the
infrastructure to deliver the mmap/comm/task records and the
AUX part in the mmap buffer (with associated AUX_RECORD).

Since the former is internal, rename it to side-band to reduce
the confusion factor.

No change in functionality.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NIngo Molnar <mingo@kernel.org>

The perf_event_aux() function iterates all PMUs and all events in
their respective per-CPU contexts to find the events to deliver
side-band records to.

For example, the brk test case in lkp triggers many mmap() operations,
which, if we're also running perf, results in many perf_event_aux()
invocations.

If we enable uncore PMU support (even when uncore events are not used),
dozens of uncore PMUs will be iterated, which can significantly
decrease brk_test's throughput.

For example, the brk throughput:

  without uncore PMUs: 2647573 ops_per_sec
  with    uncore PMUs: 1768444 ops_per_sec

... a 33% reduction.

To get at the per-CPU events that need side-band records, this patch
puts these events on a per-CPU list, this avoids iterating the PMUs
and any events that do not need side-band records.

Per task events are unchanged to avoid extra overhead on the context
switch paths.
Suggested-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reported-by: NHuang, Ying <ying.huang@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: http://lkml.kernel.org/r/1458757477-3781-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo-20160530' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible/kernel ABI changes:

- Per event callchain limit: Recently we introduced a sysctl to tune the
  max-stack for all events for which callchains were requested:

  $ sysctl kernel.perf_event_max_stack
  kernel.perf_event_max_stack = 127

  Now this patch introduces a way to configure this per event, i.e. this
  becomes possible:

  $ perf record -e sched:*/max-stack=2/ -e block:*/max-stack=10/ -a

  allowing finer tuning of how much buffer space callchains use.

  This uses an u16 from the reserved space at the end, leaving another
  u16 for future use.

  There has been interest in even finer tuning, namely to control the
  max stack for kernel and userspace callchains separately. Further
  discussion is needed, we may for instance use the remaining u16 for
  that and when it is present, assume that the sample_max_stack introduced
  in this patch applies for the kernel, and the u16 left is used for
  limiting the userspace callchain. (Arnaldo Carvalho de Melo)

Infrastructure changes:

- Adopt get_main_thread from db-export.c (Andi Kleen)

- More prep work for backward ring buffer support (Wang Nan)

- Prep work for supporting SDT (Statically Defined Tracing)
  tracepoints (Masami Hiramatsu)

- Add arch/*/include/generated/ to .gitignore (Taeung Song)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Use path/to/bin/buildid/elf instead of path/to/bin/buildid
to store corresponding elf binary.
This also stores vdso in buildid/vdso, kallsyms in buildid/kallsyms.

Note that the existing caches are not updated until user adds
or updates the cache. Anyway, if there is the old style build-id
cache it falls back to use it. (IOW, it is backward compatible)
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151537.16098.85815.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Cleanup the code flow of dso__find_kallsyms() to remove redundant
checking code and add some comment for readability.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151522.16098.43446.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introduce filename__readable to check readability by opening the file
directly. Since the access(R_OK) just checks the readability based on
real UID/GID, it is ignored that the effective UID/GID and capabilities
for some special file (e.g.  /proc/kcore).

filename__readable() directly opens given file with O_RDONLY so that the
kernel checks it by effective UID/GID and capabilities.
Signed-off-by: NMasami Hiramatsu <mhiramat@kernel.org>
Acked-by: NNamhyung Kim <namhyung@kernel.org>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20160528151513.16098.97576.stgit@devboxSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Commit 1b700c99 ("perf tools: Build syscall table .c header from
kernel's syscall_64.tbl") automatically generates per-arch syscall table
arrays, e.g.:

    arch/x86/include/generated/asm/syscalls_64.c

So add this directory to .gitignore
Signed-off-by: NTaeung Song <treeze.taeung@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 1b700c99 ("perf tools: Build syscall table .c header from kernel's syscall_64.tbl")
Link: http://lkml.kernel.org/r/1464343274-19403-1-git-send-email-treeze.taeung@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before this patch there's no way to pass arguments to fdarray__filter's
call back function.

This improvement will be used by 'perf record' to support unmapping ring
buffer for both main evlist and overwrite evlist. Without this patch
there's no way to track overwrite evlist from 'struct fdarray'.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464183898-174512-10-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Now we have evlist->backward to indicate the mmap direction. Make
perf_evlist__mmap_read() choose right direction automatically.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464183898-174512-3-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

evlist->mmap[i]->refcnt could be 0 if an evlist has no evsel or if all
evsels don't match the evlist during mmap. For example, when all evsels
are overwritable but the evlist itself is normal. To avoid crashing,
perf should check 'base' pointer before checking refcnt, and raise bug
only when base is not NULL.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464183898-174512-2-git-send-email-wangnan0@huawei.com
[ Renamed 'mmap' variable, it is reserved in old distros such as Ubuntu 12.04, breaking the build ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

There's no need to receive events from overwritable ring buffer.
Instead, perf should make them run in background until some external
event of interest takes place.  This patch makes ignores normal events from
overwrite evlists.

Overwritable events must be mapped readonly and backward, so if evlist
and evsel doesn't match (evsel->overwrite is true but either evlist is
read/write or evlist is not backward, and vice versa), skip mapping it.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464056944-166978-3-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
[ Split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

It is possible that all events in an evlist are overwritable.
perf_event__synth_time_conv() should not crash in this case.
record__pick_pc() is used to check avaliability.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464056944-166978-3-git-send-email-wangnan0@huawei.comSigned-off-by: NHe Kuang <hekuang@huawei.com>
[ Split from a larger patch ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

The tooling counterpart, now it is possible to do:

  # perf record -e sched:sched_switch/max-stack=10/ -e cycles/call-graph=dwarf,max-stack=4/ -e cpu-cycles/call-graph=dwarf,max-stack=1024/ usleep 1
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.052 MB perf.data (5 samples) ]
  # perf evlist -v
  sched:sched_switch: type: 2, size: 112, config: 0x110, { sample_period, sample_freq }: 1, sample_type: IP|TID|TIME|CALLCHAIN|CPU|PERIOD|RAW|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, mmap: 1, comm: 1, enable_on_exec: 1, task: 1, sample_id_all: 1, exclude_guest: 1, mmap2: 1, comm_exec: 1, sample_max_stack: 10
  cycles/call-graph=dwarf,max-stack=4/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 4
  cpu-cycles/call-graph=dwarf,max-stack=1024/: size: 112, { sample_period, sample_freq }: 4000, sample_type: IP|TID|TIME|CALLCHAIN|PERIOD|REGS_USER|STACK_USER|IDENTIFIER, read_format: ID, disabled: 1, inherit: 1, freq: 1, enable_on_exec: 1, sample_id_all: 1, exclude_guest: 1, exclude_callchain_user: 1, sample_regs_user: 0xff0fff, sample_stack_user: 8192, sample_max_stack: 1024
  # Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events

Using just /max-stack=N/ means /call-graph=fp,max-stack=N/, that should
be further configurable by means of some .perfconfig knob.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Additionally to being able to control the system wide maximum depth via
/proc/sys/kernel/perf_event_max_stack, now we are able to ask for
different depths per event, using perf_event_attr.sample_max_stack for
that.

This uses an u16 hole at the end of perf_event_attr, that, when
perf_event_attr.sample_type has the PERF_SAMPLE_CALLCHAIN, if
sample_max_stack is zero, means use perf_event_max_stack, otherwise
it'll be bounds checked under callchain_mutex.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/n/tip-kolmn1yo40p7jhswxwrc7rrd@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Move the get_main_thread function from db-export.c to thread.c so that
it can be used elsewhere.
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/1464051145-19968-2-git-send-email-andi@firstfloor.org
[ Removed leftover bits from db-export.h ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-urgent-for-mingo-20160527' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 - Fix kptr_restrict=2 related 'perf record' segfault (Wang Nan)

 - Fix CTF/libbabeltrace handling of chinese COMM strings (Wang Nan)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

We observed some crazy apps on Android set their comm to unprintable
string. For example:

  # cat /proc/10607/task/*/comm
  tencent.qqmusic
  ...
  Binder_2
  日志输出线  <-- Chinese word 'log output thread'
  WifiManager
  ...

'perf data convert' fails to convert perf.data with such string to CTF format.

For example:

  # cat << EOF > ./badguy.c
  #include <sys/prctl.h>
  int main(int argc, char *argv[])
  {
         prctl(PR_SET_NAME, "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf");
         while(1)
                 sleep(1);
         return 0;
  }
  EOF
  # gcc ./badguy.c
  # perf record -e sched:* ./a.out
  # perf data convert --to-ctf ./bad.ctf
  CTF stream 4 flush failed
  [ perf data convert: Converted 'perf.data' into CTF data './bad.ctf' ]
  [ perf data convert: Converted and wrote 0.008 MB (78 samples)  ]
  # babeltrace ./bad.ctf/
  [error] Packet size (18446744073709551615 bits) is larger than remaining file size (262144 bits).
  [error] Stream index creation error.
  [error] Open file stream error.
  [warning] [Context] Cannot open_trace of format ctf at path ./bad.ctf.
  [warning] [Context] cannot open trace "./bad.ctf" from ./bad.ctf/ for reading.
  [error] Cannot open any trace for reading.

  [error] opening trace "./bad.ctf/" for reading.

  [error] none of the specified trace paths could be opened.

This patch converts unprintable characters to hexadecimal word.

After applying this patch the above test works correctly:

  # ~/perf data convert --to-ctf ./good.ctf
  [ perf data convert: Converted 'perf.data' into CTF data './good.ctf' ]
  [ perf data convert: Converted and wrote 0.008 MB (78 samples) ]
  # babeltrace ./good.ctf
  ..
  [23:14:35.491665268] (+0.000001100) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5123, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 }
  [23:14:35.491666230] (+0.000000962) sched:sched_wakeup: { cpu_id = 4 }, { perf_ip = 0xFFFFFFFF810AEF33, perf_tid = 0, perf_pid = 0, perf_id = 5122, perf_period = 1, common_type = 270, common_flags = 45, common_preempt_count = 4, common_pid = 0, comm = "\xe6\x97\xa5\xe5\xbf\x97\xe8\xbe\x93\xe5\x87\xba\xe7\xba\xbf", pid = 1057, prio = 120, success = 1, target_cpu = 4 }
  ..

Committer note:

To build perf with libabeltrace, use:

  $ mkdir -p /tmp/build/perf
  $ make LIBBABELTRACE=1 LIBBABELTRACE_DIR=/usr/local O=/tmp/build/perf -C tools/perf install-bin

Or equivalent (no O=, fixup LIBBABELTRACE_DIR, etc).
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464348951-179595-1-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Before this patch, a simple 'perf record' could fail if kptr_restrict is
set to 1 (for normal user) or 2 (for root):

  # perf record ls
  WARNING: Kernel address maps (/proc/{kallsyms,modules}) are restricted,
  check /proc/sys/kernel/kptr_restrict.

  Samples in kernel functions may not be resolved if a suitable vmlinux
  file is not found in the buildid cache or in the vmlinux path.

  Samples in kernel modules won't be resolved at all.

  If some relocation was applied (e.g. kexec) symbols may be misresolved
  even with a suitable vmlinux or kallsyms file.

  Segmentation fault (core dumped)

This patch skips perf_event__synthesize_kernel_mmap() when kptr is not
available.
Signed-off-by: NWang Nan <wangnan0@huawei.com>
Tested-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Fixes: 45e90056 ("perf machine: Do not bail out if not managing to read ref reloc symbol")
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1464081688-167940-2-git-send-email-wangnan0@huawei.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>