Firmwares may provide some firmware wide configuration regions which can
be configured by the coefficient files using the firmware ID as the
algorithm ID, include these in the algorithm list.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Reported-by: NRyo Tsutsui <Ryo.Tsutsui@wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

The Charge Pump needs the DSP clock to work properly, without it the
bypass to HP/LINEOUT is not working properly. This requirement is not
mentioned in the datasheet but has been confirmed by Mark Brown from
Wolfson.
Signed-off-by: NAlban Bedel <alban.bedel@avionic-design.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

For future work to have specific handling for some firmwares.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Source files shouldn't have the executable bit set.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Older .bin files report the global coefficients as absolute address writes
to zero; maintain compatibility with them.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

ADAU1373_BCLKDIV_SOURCE is defined as BIT(5) which uses UL constants. On
amd64 the result of the ones complement operator is then truncated to
unsigned int according to the prototype of snd_soc_update_bits(). I think
gcc is correctly warning that the upper 32 bits are lost.

sound/soc/codecs/adau1373.c: In function 'adau1373_hw_params':
sound/soc/codecs/adau1373.c:940:3: warning: large integer implicitly truncated to unsigned type [-Woverflow]

gcc version 4.6.3

Add 2 more BCLKDIV mask macros as explained by Lars:

The BCLKDIV has three fields. The bitclock divider (bit 0-1), the samplerate
(bit 2-4) and the source select (bit 5). Here we want to update the bitclock
divider field and the samplerate field. When I wrote the code I was lazy and
used ~ADAU1373_BCLKDIV_SOURCE as the mask, which for this register is
functionally equivalent to ADAU1373_BCLKDIV_SR_MASK | ADAU1373_BCLKDIV_BCLK_MASK.
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
Acked-by: NLars-Peter Clausen <lars@metafoo.de>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

'file' is malloced in wm_adsp_load_coeff() and should be freed
before leaving from the error handling cases, otherwise it will cause
memory leak.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Evaluation has identified some performance improvements to the device.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The delay parameter of schedule_delayed_work() is number of jiffies to wait
rather than miliseconds.

Before commit 6d3c26bc "ASoC: Use delayed work to debounce WM8350 jack IRQs",
the debounce time is 200 miliseconds in wm8350_hp_jack_handler().
So I think this is a bug when convert to use delayed work.
Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NAxel Lin <axel.lin@ingics.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch adds support for the Dialog DA7213 audio codec.
Signed-off-by: NAdam Thomson <Adam.Thomson.Opensource@diasemi.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

For optimal performance the inputs should be kept muted until after power
up. Since there are few use cases for muting inputs during capture move
the mutes to automatic control.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fix these two compile errors on s390 which does not have HAS_IOPORT
nor GENERIC_HARDIRQS:

sound/pci/lx6464es/lx6464es.c: In function ‘snd_lx6464es_free’:
sound/pci/lx6464es/lx6464es.c:565:2: error: implicit declaration of function ‘ioport_unmap’

sound/soc/codecs/wm8903.c: In function ‘wm8903_set_pdata_irq_trigger’:
sound/soc/codecs/wm8903.c:1954:9: error: implicit declaration of function ‘irq_get_irq_data’
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch completes the replacement of the existing max98090 driver,
by installing a more complete driver.
Signed-off-by: NJerry Wong <jerry.wong@maximintegrated.com>
Tested-by: NMatthew Mowdy <matthew.mowdy@maximintegrated.com>
Reviewed-by: NRalph Birt <ralph.birt@maximintegrated.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch removes the existing max98090 driver prior to installing a more
complete one.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Use _dbg for debug messages.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allow the regmap API to use asynchronous I/O where supported to minimise
the delay between transfers, reducing firmware download times.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Convert MicBias widgets to supply widget.

On tlv320aic3x, Mic bias power on/off shares the same register bits
with output mic bias voltage.  So, when power on mic bias, we need
reclaim it to voltage value.

Provide a new platform data so that the micbias voltage can be sent
according to board requirement. Now since tlv320aic3x codec driver
is DT aware, update dt files and functions to handle this new
"micbias-vg"  platform data.

Because of sharing of bits, when enabling the micbias, voltage also
needs to be updated. So use SND_SOC_DAPM_POST_PMU & SND_SOC_DAPM_PRE_PMD
macro to create an event to handle this.

Since micbias is converted to supply widget, updated machine drivers as
well.

This change is runtime tested on da850-evm with audio loopback
(arecord|aplay) for confirmation.
Signed-off-by: NHebbar Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Previously arizona_calc_fll() was checking if the target frequency is
exactly divisible by reference frequency, but should have been product
of the ratio and the reference frequency.

Also scale down the Lamba and Theta coefficients be under 16-bits in
order to match the registers.
Signed-off-by: NRyo Tsutsui <ryo.tsutsui@wolfsonmicro.com>
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

No TLV information since it's not actually a direct gain control.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Need to ensure we don't get confused by simultaneous updates.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Playing a mono stream on the TLV320AIC3x results in too fast playback rate.

Remove mono support so that mono streams can be played correctly on this codec.

Tested with imx-ssi (i.MX25) and TLV320AIC3104.
Signed-off-by: NBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Maximise robustness for the widest range of firmwares by ensuring the DSP
is in a consistent state when halted.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Allows ADSP control code to set the dsp clock rate to match the
sys clock rate.
Signed-off-by: NChris Rattray <crattray@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Convert all uses of devm_request_and_ioremap() to the newly introduced
devm_ioremap_resource() which provides more consistent error handling.

devm_ioremap_resource() provides its own error messages so all explicit
error messages can be removed from the failure code paths.
Signed-off-by: NThierry Reding <thierry.reding@avionic-design.de>
Acked-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Liam Girdwood <lrg@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch correctly releases the firmware if the magic string in the
firmware header does not match.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>