__wait_event_interruptible_lock_irq_timeout() needs the timeout
parameter passed instead of "ret".

This magically compiled since the only user has a local ret
variable. Luckily we got a build warning:

  CC      drivers/s390/scsi/zfcp_qdio.o
  drivers/s390/scsi/zfcp_qdio.c: In function 'zfcp_qdio_sbal_get':
  include/linux/wait.h:780:15: warning: 'ret' may be used uninitialized
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20131031114814.GB5551@osirisSigned-off-by: NIngo Molnar <mingo@kernel.org>

Resolve cherry-picking conflicts:

Conflicts:
	mm/huge_memory.c
	mm/memory.c
	mm/mprotect.c

See this upstream merge commit for more details:

  52469b4f Merge branch 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipSigned-off-by: NIngo Molnar <mingo@kernel.org>

Pull NUMA balancing memory corruption fixes from Ingo Molnar:
 "So these fixes are definitely not something I'd like to sit on, but as
  I said to Mel at the KS the timing is quite tight, with Linus planning
  v3.12-final within a week.

  Fedora-19 is affected:

   comet:~> grep NUMA_BALANCING /boot/config-3.11.3-201.fc19.x86_64

   CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
   CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
   CONFIG_NUMA_BALANCING=y

  AFAICS Ubuntu will be affected as well, once it updates the kernel:

   hubble:~> grep NUMA_BALANCING /boot/config-3.8.0-32-generic

   CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y
   CONFIG_NUMA_BALANCING_DEFAULT_ENABLED=y
   CONFIG_NUMA_BALANCING=y

  These 6 commits are a minimalized set of cherry-picks needed to fix
  the memory corruption bugs.  All commits are fixes, except "mm: numa:
  Sanitize task_numa_fault() callsites" which is a cleanup that made two
  followup fixes simpler.

  I've done targeted testing with just this SHA1 to try to make sure
  there are no cherry-picking artifacts.  The original non-cherry-picked
  set of fixes were exposed to linux-next for a couple of weeks"

* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  mm: Account for a THP NUMA hinting update as one PTE update
  mm: Close races between THP migration and PMD numa clearing
  mm: numa: Sanitize task_numa_fault() callsites
  mm: Prevent parallel splits during THP migration
  mm: Wait for THP migrations to complete during NUMA hinting faults
  mm: numa: Do not account for a hinting fault if we raced

Pull input updates from Dmitry Torokhov:
 "A bit later than I would want, but the changes are very minor - a few
  new device IDs for new hardware in existing drivers, fix for battery
  in Wacom devices not be considered system battery and cause emergency
  hibernations, and a couple of other bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: ALPS - add support for model found on Dell XT2
  Input: wacom - add support for ISDv4 0x10E sensor
  Input: wacom - add support for ISDv4 0x10F sensor
  Input: wacom - export battery scope
  Input: cm109 - convert high volume dev_err() to dev_err_ratelimited()
  Input: move name/timer init to input_alloc_dev()
  Input: i8042 - i8042_flush fix for a full 8042 buffer
  Input: pxa27x_keypad - fix NULL pointer dereference

Pull ACPI and power management fixes from Rafael J Wysocki:
 "Last-minute ACPI and power management fixes for 3.12

   - Revert epoll and select commits related to the freezer, introduced
     during the 3.11 cycle, that cause mysterious user space breakage to
     occur during resume from suspend to RAM for multiple users of
     32-bit x86 systems.  Material for 3.11.y stable kernels.

   - Revert a recent ACPI-based PCI hotplug (ACPIPHP) commit that was
     part of boot problem fixes for one machine, but turns out to cause
     issues with hotplug on Thunderbolt chains with multiple devices.
     It also turns out to be unnecessary after another fix in the same
     area that went in later.  From Mika Westerberg"

* tag 'pm+acpi-3.12-late' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI / hotplug / PCI: Avoid doing too much for spurious notifies"
  Revert "select: use freezable blocking call"
  Revert "epoll: use freezable blocking call"

This patch adds support for touchpad found on Dell XT2. It's a dual device
with device ID: 73, 00, 14, that comply with "ALPS_PROTO_V2".
Signed-off-by: NYunkang Tang <yunkang.tang@cn.alps.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Just a few small fixes for radeon (audio regression fix,
stability fix, and an endian bug noticed by coverity).

* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon/dpm: fix incompatible casting on big endian
  drm/radeon: disable bapm on KB
  drm/radeon: use sw CTS/N values for audio on DCE4+

Merge three fixes from Andrew Morton.

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  memcg: use __this_cpu_sub() to dec stats to avoid incorrect subtrahend casting
  percpu: fix this_cpu_sub() subtrahend casting for unsigneds
  mm/pagewalk.c: fix walk_page_range() access of wrong PTEs

As of commit 3ea67d06 ("memcg: add per cgroup writeback pages
accounting") memcg counter errors are possible when moving charged
memory to a different memcg.  Charge movement occurs when processing
writes to memory.force_empty, moving tasks to a memcg with
memcg.move_charge_at_immigrate=1, or memcg deletion.

An example showing error after memory.force_empty:

  $ cd /sys/fs/cgroup/memory
  $ mkdir x
  $ rm /data/tmp/file
  $ (echo $BASHPID >> x/tasks && exec mmap_writer /data/tmp/file 1M) &
  [1] 13600
  $ grep ^mapped x/memory.stat
  mapped_file 1048576
  $ echo 13600 > tasks
  $ echo 1 > x/memory.force_empty
  $ grep ^mapped x/memory.stat
  mapped_file 4503599627370496

mapped_file should end with 0.
  4503599627370496 == 0x10,0000,0000,0000 == 0x100,0000,0000 pages
  1048576          == 0x10,0000           == 0x100 pages

This issue only affects the source memcg on 64 bit machines; the
destination memcg counters are correct.  So the rmdir case is not too
important because such counters are soon disappearing with the entire
memcg.  But the memcg.force_empty and memory.move_charge_at_immigrate=1
cases are larger problems as the bogus counters are visible for the
(possibly long) remaining life of the source memcg.

The problem is due to memcg use of __this_cpu_from(.., -nr_pages), which
is subtly wrong because it subtracts the unsigned int nr_pages (either
-1 or -512 for THP) from a signed long percpu counter.  When
nr_pages=-1, -nr_pages=0xffffffff.  On 64 bit machines stat->count[idx]
is signed 64 bit.  So memcg's attempt to simply decrement a count (e.g.
from 1 to 0) boils down to:

  long count = 1
  unsigned int nr_pages = 1
  count += -nr_pages  /* -nr_pages == 0xffff,ffff */
  count is now 0x1,0000,0000 instead of 0

The fix is to subtract the unsigned page count rather than adding its
negation.  This only works once "percpu: fix this_cpu_sub() subtrahend
casting for unsigneds" is applied to fix this_cpu_sub().
Signed-off-by: NGreg Thelen <gthelen@google.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

this_cpu_sub() is implemented as negation and addition.

This patch casts the adjustment to the counter type before negation to
sign extend the adjustment.  This helps in cases where the counter type
is wider than an unsigned adjustment.  An alternative to this patch is
to declare such operations unsupported, but it seemed useful to avoid
surprises.

This patch specifically helps the following example:
  unsigned int delta = 1
  preempt_disable()
  this_cpu_write(long_counter, 0)
  this_cpu_sub(long_counter, delta)
  preempt_enable()

Before this change long_counter on a 64 bit machine ends with value
0xffffffff, rather than 0xffffffffffffffff.  This is because
this_cpu_sub(pcp, delta) boils down to this_cpu_add(pcp, -delta),
which is basically:
  long_counter = 0 + 0xffffffff

Also apply the same cast to:
  __this_cpu_sub()
  __this_cpu_sub_return()
  this_cpu_sub_return()

All percpu_test.ko passes, especially the following cases which
previously failed:

  l -= ui_one;
  __this_cpu_sub(long_counter, ui_one);
  CHECK(l, long_counter, -1);

  l -= ui_one;
  this_cpu_sub(long_counter, ui_one);
  CHECK(l, long_counter, -1);
  CHECK(l, long_counter, 0xffffffffffffffff);

  ul -= ui_one;
  __this_cpu_sub(ulong_counter, ui_one);
  CHECK(ul, ulong_counter, -1);
  CHECK(ul, ulong_counter, 0xffffffffffffffff);

  ul = this_cpu_sub_return(ulong_counter, ui_one);
  CHECK(ul, ulong_counter, 2);

  ul = __this_cpu_sub_return(ulong_counter, ui_one);
  CHECK(ul, ulong_counter, 1);
Signed-off-by: NGreg Thelen <gthelen@google.com>
Acked-by: NTejun Heo <tj@kernel.org>
Acked-by: NJohannes Weiner <hannes@cmpxchg.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

When walk_page_range walk a memory map's page tables, it'll skip
VM_PFNMAP area, then variable 'next' will to assign to vma->vm_end, it
maybe larger than 'end'.  In next loop, 'addr' will be larger than
'next'.  Then in /proc/XXXX/pagemap file reading procedure, the 'addr'
will growing forever in pagemap_pte_range, pte_to_pagemap_entry will
access the wrong pte.

  BUG: Bad page map in process procrank  pte:8437526f pmd:785de067
  addr:9108d000 vm_flags:00200073 anon_vma:f0d99020 mapping:  (null) index:9108d
  CPU: 1 PID: 4974 Comm: procrank Tainted: G    B   W  O 3.10.1+ #1
  Call Trace:
    dump_stack+0x16/0x18
    print_bad_pte+0x114/0x1b0
    vm_normal_page+0x56/0x60
    pagemap_pte_range+0x17a/0x1d0
    walk_page_range+0x19e/0x2c0
    pagemap_read+0x16e/0x200
    vfs_read+0x84/0x150
    SyS_read+0x4a/0x80
    syscall_call+0x7/0xb
Signed-off-by: NLiu ShuoX <shuox.liu@intel.com>
Signed-off-by: NChen LinX <linx.z.chen@intel.com>
Acked-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reviewed-by: NNaoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: <stable@vger.kernel.org>	[3.10.x+]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

I've seen a fair number of issues with kswapd and other processes
appearing to get stuck in v3.12-rc.  Using sysrq-p many times seems to
indicate that it gets stuck somewhere in list_lru_walk_node(), called
from prune_icache_sb() and super_cache_scan().

I never seem to be able to trigger a calltrace for functions above that
point.

So I decided to add the following to super_cache_scan():

    @@ -81,10 +81,14 @@ static unsigned long super_cache_scan(struct shrinker *shrink,
            inodes = list_lru_count_node(&sb->s_inode_lru, sc->nid);
            dentries = list_lru_count_node(&sb->s_dentry_lru, sc->nid);
            total_objects = dentries + inodes + fs_objects + 1;
    +printk("%s:%u: %s: dentries %lu inodes %lu total %lu\n", current->comm, current->pid, __func__, dentries, inodes, total_objects);

            /* proportion the scan between the caches */
            dentries = mult_frac(sc->nr_to_scan, dentries, total_objects);
            inodes = mult_frac(sc->nr_to_scan, inodes, total_objects);
    +printk("%s:%u: %s: dentries %lu inodes %lu\n", current->comm, current->pid, __func__, dentries, inodes);
    +BUG_ON(dentries == 0);
    +BUG_ON(inodes == 0);

            /*
             * prune the dcache first as the icache is pinned by it, then
    @@ -99,7 +103,7 @@ static unsigned long super_cache_scan(struct shrinker *shrink,
                    freed += sb->s_op->free_cached_objects(sb, fs_objects,
                                                           sc->nid);
            }
    -
    +printk("%s:%u: %s: dentries %lu inodes %lu freed %lu\n", current->comm, current->pid, __func__, dentries, inodes, freed);
            drop_super(sb);
            return freed;
     }

and shortly thereafter, having applied some pressure, I got this:

    update-apt-xapi:1616: super_cache_scan: dentries 25632 inodes 2 total 25635
    update-apt-xapi:1616: super_cache_scan: dentries 1023 inodes 0
    ------------[ cut here ]------------
    Kernel BUG at c0101994 [verbose debug info unavailable]
    Internal error: Oops - BUG: 0 [#3] SMP ARM
    Modules linked in: fuse rfcomm bnep bluetooth hid_cypress
    CPU: 0 PID: 1616 Comm: update-apt-xapi Tainted: G      D      3.12.0-rc7+ #154
    task: daea1200 ti: c3bf8000 task.ti: c3bf8000
    PC is at super_cache_scan+0x1c0/0x278
    LR is at trace_hardirqs_on+0x14/0x18
    Process update-apt-xapi (pid: 1616, stack limit = 0xc3bf8240)
    ...
    Backtrace:
      (super_cache_scan) from [<c00cd69c>] (shrink_slab+0x254/0x4c8)
      (shrink_slab) from [<c00d09a0>] (try_to_free_pages+0x3a0/0x5e0)
      (try_to_free_pages) from [<c00c59cc>] (__alloc_pages_nodemask+0x5)
      (__alloc_pages_nodemask) from [<c00e07c0>] (__pte_alloc+0x2c/0x13)
      (__pte_alloc) from [<c00e3a70>] (handle_mm_fault+0x84c/0x914)
      (handle_mm_fault) from [<c001a4cc>] (do_page_fault+0x1f0/0x3bc)
      (do_page_fault) from [<c001a7b0>] (do_translation_fault+0xac/0xb8)
      (do_translation_fault) from [<c000840c>] (do_DataAbort+0x38/0xa0)
      (do_DataAbort) from [<c00133f8>] (__dabt_usr+0x38/0x40)

Notice that we had a very low number of inodes, which were reduced to
zero my mult_frac().

Now, prune_icache_sb() calls list_lru_walk_node() passing that number of
inodes (0) into that as the number of objects to scan:

    long prune_icache_sb(struct super_block *sb, unsigned long nr_to_scan,
                         int nid)
    {
            LIST_HEAD(freeable);
            long freed;

            freed = list_lru_walk_node(&sb->s_inode_lru, nid, inode_lru_isolate,
                                           &freeable, &nr_to_scan);

which does:

    unsigned long
    list_lru_walk_node(struct list_lru *lru, int nid, list_lru_walk_cb isolate,
                       void *cb_arg, unsigned long *nr_to_walk)
    {

            struct list_lru_node    *nlru = &lru->node[nid];
            struct list_head *item, *n;
            unsigned long isolated = 0;

            spin_lock(&nlru->lock);
    restart:
            list_for_each_safe(item, n, &nlru->list) {
                    enum lru_status ret;

                    /*
                     * decrement nr_to_walk first so that we don't livelock if we
                     * get stuck on large numbesr of LRU_RETRY items
                     */
                    if (--(*nr_to_walk) == 0)
                            break;

So, if *nr_to_walk was zero when this function was entered, that means
we're wanting to operate on (~0UL)+1 objects - which might as well be
infinite.

Clearly this is not correct behaviour.  If we think about the behaviour
of this function when *nr_to_walk is 1, then clearly it's wrong - we
decrement first and then test for zero - which results in us doing
nothing at all.  A post-decrement would give the desired behaviour -
we'd try to walk one object and one object only if *nr_to_walk were one.

It also gives the correct behaviour for zero - we exit at this point.

Fixes: 5cedf721 ("list_lru: fix broken LRU_RETRY behaviour")
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
[ Modified to make sure we never underflow the count: this function gets
  called in a loop, so the 0 -> ~0ul transition is dangerous  - Linus ]
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull serial fixes from Greg KH:
 "Here are 3 tiny fixes that are needed for 3.12-final for some serial
  drivers.

  One of them is a revert of a broken patch, and two others are fixes
  for reported bugs.  All of these have been in linux-next for a while,
  I forgot I had not sent them to you yet, my fault"

(Actually, Greg, you _had_ sent two of the three, so this pulls in just
one actual new fix)

* tag 'tty-3.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  tty/serial: at91: fix uart/usart selection for older products

Pull drm fixes from Dave Airlie:
 "Mainly Intel regression fixes and quirks, along with a simple one
  liner to fix rendernodes ioctl access (off by default, but testers
  want to test it)"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm: allow DRM_IOCTL_VERSION on render-nodes
  drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb
  drm/i915: No LVDS hardware on Intel D410PT and D425KT
  drm/i915/dp: workaround BIOS eDP bpp clamping issue
  drm/i915: Add HSW CRT output readout support
  drm/i915: Add support for pipe_bpp readout

Pull sound fixes from Takashi Iwai:
 "A few small HD-audio regression fixes, mostly for stable kernels, too"

* tag 'sound-3.12' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda - Fix silent headphone on Thinkpads with AD1984A codec
  ALSA: hda - Add missing initial vmaster hook at build_controls callback
  ALSA: hda - Fix unbalanced runtime PM refcount after S3/S4

Pull KVM fixes from Paolo Bonzini:
 "Fixes for the 3.12 debugfs problem - removing the duplicate directory
  name, and using a better the error code"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: use a more sensible error number when debugfs directory creation fails
  KVM: Fix modprobe failure for kvm_intel/kvm_amd

The icount.reserved[] array isn't initialized so it leaks stack
information to userspace.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The DevInfo.u32Reserved[] array isn't initialized so it leaks kernel
information to user space.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to check the length parameter before doing the memcpy().  I've
actually changed it to strlcpy() as well so that it's NUL terminated.

You need CAP_NET_ADMIN to trigger these so it's not the end of the
world.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

In commit d496f94d ('[SCSI] aacraid: fix security weakness') we
added a check on CAP_SYS_RAWIO to the ioctl.  The compat ioctls need the
check as well.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We need to check "count" so we don't overflow the ei->data buffer.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We don't cap the size of buffer from the user so we could write past the
end of the array here.  Only root can write to this file.
Reported-by: NNico Golde <nico@ngolde.de>
Reported-by: NFabian Yamaguchi <fabs@goesec.de>
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: stable@kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit 2dc41281 (ACPI / hotplug / PCI: Avoid doing too much for
spurious notifies) changed the enable_slot() to check return value of
pci_scan_slot() and if it is zero return early from the function. It
means that there were no new devices in this particular slot.

However, if a device appeared deeper in the hierarchy the code now
ignores it causing things like Thunderbolt chaining fail to recognize
new devices.

The problem with Alex Williamson's machine was solved with commit
a47d8c8e (ACPI / hotplug / PCI: Avoid parent bus rescans on spurious
device checks) and hence we should be able to restore the original
functionality that we always rescan on bus check notification.

On a device check notification we still check what acpiphp_rescan_slot()
returns and on zero bail out early.

Fixes: 2dc41281 (ACPI / hotplug / PCI: Avoid doing too much for spurious notifies)
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This reverts commit 9745cdb3 (select: use freezable blocking call)
that triggers problems during resume from suspend to RAM on Paul Bolle's
32-bit x86 machines.  Paul says:

  Ever since I tried running (release candidates of) v3.11 on the two
  working i686s I still have lying around I ran into issues on resuming
  from suspend. Reverting 9745cdb3 (select: use freezable blocking
  call) resolves those issues.

  Resuming from suspend on i686 on (release candidates of) v3.11 and
  later triggers issues like:

  traps: systemd[1] general protection ip:b738e490 sp:bf882fc0 error:0 in libc-2.16.so[b731c000+1b0000]

  and

  traps: rtkit-daemon[552] general protection ip:804d6e5 sp:b6cb32f0 error:0 in rtkit-daemon[8048000+d000]

  Once I hit the systemd error I can only get out of the mess that the
  system is at that point by power cycling it.

Since we are reverting another freezer-related change causing similar
problems to happen, this one should be reverted as well.

References: https://lkml.org/lkml/2013/10/29/583Reported-by: NPaul Bolle <pebolle@tiscali.nl>
Fixes: 9745cdb3 (select: use freezable blocking call)
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+

This reverts commit 1c441e92 (epoll: use freezable blocking call)
which is reported to cause user space memory corruption to happen
after suspend to RAM.

Since it appears to be extremely difficult to root cause this
problem, it is best to revert the offending commit and try to address
the original issue in a better way later.

References: https://bugzilla.kernel.org/show_bug.cgi?id=61781Reported-by: NNatrio <natrio@list.ru>
Reported-by: NJeff Pohlmeyer <yetanothergeek@gmail.com>
Bisected-by: NLeo Wolf <jclw@ymail.com>
Fixes: 1c441e92 (epoll: use freezable blocking call)
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: 3.11+ <stable@vger.kernel.org> # 3.11+

I don't know if this was due to cut and paste, or somebody was really
using a D20 to pick the error code for kvm_init_debugfs as suggested by
Linus (EFAULT is 14, so the possibility cannot be entirely ruled out).

In any case, this patch fixes it.
Reported-by: NTim Gardner <tim.gardner@canonical.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The x86 specific kvm init creates a new conflicting
debugfs directory which causes modprobe issues
with kvm_intel and kvm_amd. For example,

sudo modprobe kvm_amd
modprobe: ERROR: could not insert 'kvm_amd': Bad address

The simplest fix is to just rename the directory. The following
KVM config options are set:

CONFIG_KVM_GUEST=y
CONFIG_KVM_DEBUG_FS=y
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_IRQ_ROUTING=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
CONFIG_KVM_AMD=m
CONFIG_KVM_DEVICE_ASSIGNMENT=y

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Gleb Natapov <gleb@redhat.com>
Cc: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: NTim Gardner <tim.gardner@canonical.com>
[Change debugfs directory name. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

DRM_IOCTL_VERSION is a reliable way to get the driver-name and version
information. It's not related to the interface-version (SET_VERSION ioctl)
so we can safely enable it on render-nodes.

Note that gbm uses udev-BUSID to load the correct mesa driver. However,
the VERSION ioctl should be the more reliable way to do this (in case we
add new DRM-bus drivers which have no BUSID or similar).
Signed-off-by: NDavid Herrmann <dh.herrmann@gmail.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel into drm-fixes

Regression and warn fixes for i915.

* tag 'drm-intel-fixes-2013-10-29' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Fix the PPT fdi lane bifurcate state handling on ivb
  drm/i915: No LVDS hardware on Intel D410PT and D425KT
  drm/i915/dp: workaround BIOS eDP bpp clamping issue
  drm/i915: Add HSW CRT output readout support
  drm/i915: Add support for pipe_bpp readout

Nico Golde reports a few straggling uses of [io_]remap_pfn_range() that
really should use the vm_iomap_memory() helper.  This trivially converts
two of them to the helper, and comments about why the third one really
needs to continue to use remap_pfn_range(), and adds the missing size
check.
Reported-by: NNico Golde <nico@ngolde.de>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org.

Pull perf tooling fixes from Ingo Molnar:
 "This contains five tooling fixes:

   - fix a remaining mmap2 assumption which resulted in perf top output
     breakage
   - fix mmap ring-buffer processing bug that corrupts data
   - fix for a severe python scripting memory leak
   - fix broken (and user-visible) -g option handling
   - fix stdio output

  The diffstat size is larger than what we'd like to see this late :-/"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf tools: Fixup mmap event consumption
  perf top: Split -G and --call-graph
  perf record: Split -g and --call-graph
  perf hists: Add color overhead for stdio output buffer
  perf tools: Fix up /proc/PID/maps parsing
  perf script python: Fix mem leak due to missing Py_DECREFs on dict entries

Without the timer debugging, the delayed kobject release will just
result in undebuggable oopses if it triggers any latent bugs.  That
doesn't actually help debugging at all.

So make DEBUG_KOBJECT_RELEASE depend on DEBUG_OBJECTS_TIMERS to avoid
having people enable one without the other.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Originally I've thought that this is leftover hw state dirt from the
BIOS. But after way too much helpless flailing around on my part I've
noticed that the actual bug is when we change the state of an already
active pipe.

For example when we change the fdi lines from 2 to 3 without switching
off outputs in-between we'll never see the crucial on->off transition
in the ->modeset_global_resources hook the current logic relies on.

Patch version 2 got this right by instead also checking whether the
pipe is indeed active. But that in turn broke things when pipes have
been turned off through dpms since the bifurcate enabling is done in
the ->crtc_mode_set callback.

To address this issues discussed with Ville in the patch review move
the setting of the bifurcate bit into the ->crtc_enable hook. That way
we won't wreak havoc with this state when userspace puts all other
outputs into dpms off state. This also moves us forward with our
overall goal to unify the modeset and dpms on paths (which we need to
have to allow runtime pm in the dpms off state).

Unfortunately this requires us to move the bifurcate helpers around a
bit.

Also update the commit message, I've misanalyzed the bug rather badly.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70507Tested-by: NJan-Michael Brummer <jan.brummer@tabos.org>
Cc: stable@vger.kernel.org
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

throttle_cfs_rq() doesn't check to make sure that period_timer is running,
and while update_curr/assign_cfs_runtime does, a concurrently running
period_timer on another cpu could cancel itself between this cpu's
update_curr and throttle_cfs_rq(). If there are no other cfs_rqs running
in the tg to restart the timer, this causes the cfs_rq to be stranded
forever.

Fix this by calling __start_cfs_bandwidth() in throttle if the timer is
inactive.

(Also add some sched_debug lines for cfs_bandwidth.)

Tested: make a run/sleep task in a cgroup, loop switching the cgroup
between 1ms/100ms quota and unlimited, checking for timer_active=0 and
throttled=1 as a failure. With the throttle_cfs_rq() change commented out
this fails, with the full patch it passes.
Signed-off-by: NBen Segall <bsegall@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181632.22647.84174.stgit@sword-of-the-dawn.mtv.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Currently, group entity load-weights are initialized to zero. This
admits some races with respect to the first time they are re-weighted in
earlty use. ( Let g[x] denote the se for "g" on cpu "x". )

Suppose that we have root->a and that a enters a throttled state,
immediately followed by a[0]->t1 (the only task running on cpu[0])
blocking:

  put_prev_task(group_cfs_rq(a[0]), t1)
  put_prev_entity(..., t1)
  check_cfs_rq_runtime(group_cfs_rq(a[0]))
  throttle_cfs_rq(group_cfs_rq(a[0]))

Then, before unthrottling occurs, let a[0]->b[0]->t2 wake for the first
time:

  enqueue_task_fair(rq[0], t2)
  enqueue_entity(group_cfs_rq(b[0]), t2)
  enqueue_entity_load_avg(group_cfs_rq(b[0]), t2)
  account_entity_enqueue(group_cfs_ra(b[0]), t2)
  update_cfs_shares(group_cfs_rq(b[0]))
  < skipped because b is part of a throttled hierarchy >
  enqueue_entity(group_cfs_rq(a[0]), b[0])
  ...

We now have b[0] enqueued, yet group_cfs_rq(a[0])->load.weight == 0
which violates invariants in several code-paths. Eliminate the
possibility of this by initializing group entity weight.
Signed-off-by: NPaul Turner <pjt@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20131016181627.22647.47543.stgit@sword-of-the-dawn.mtv.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

__start_cfs_bandwidth calls hrtimer_cancel while holding rq->lock,
waiting for the hrtimer to finish. However, if sched_cfs_period_timer
runs for another loop iteration, the hrtimer can attempt to take
rq->lock, resulting in deadlock.

Fix this by ensuring that cfs_b->timer_active is cleared only if the
_latest_ call to do_sched_cfs_period_timer is returning as idle. Then
__start_cfs_bandwidth can just call hrtimer_try_to_cancel and wait for
that to succeed or timer_active == 1.
Signed-off-by: NBen Segall <bsegall@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181622.22647.16643.stgit@sword-of-the-dawn.mtv.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

hrtimer_expires_remaining does not take internal hrtimer locks and thus
must be guarded against concurrent __hrtimer_start_range_ns (but
returning HRTIMER_RESTART is safe). Use cfs_b->lock to make it safe.
Signed-off-by: NBen Segall <bsegall@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181617.22647.73829.stgit@sword-of-the-dawn.mtv.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When we transition cfs_bandwidth_used to false, any currently
throttled groups will incorrectly return false from cfs_rq_throttled.
While tg_set_cfs_bandwidth will unthrottle them eventually, currently
running code (including at least dequeue_task_fair and
distribute_cfs_runtime) will cause errors.

Fix this by turning off cfs_bandwidth_used only after unthrottling all
cfs_rqs.

Tested: toggle bandwidth back and forth on a loaded cgroup. Caused
crashes in minutes without the patch, hasn't crashed with it.
Signed-off-by: NBen Segall <bsegall@google.com>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: pjt@google.com
Link: http://lkml.kernel.org/r/20131016181611.22647.80365.stgit@sword-of-the-dawn.mtv.corp.google.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

A THP PMD update is accounted for as 512 pages updated in vmstat.  This is
large difference when estimating the cost of automatic NUMA balancing and
can be misleading when comparing results that had collapsed versus split
THP. This patch addresses the accounting issue.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-10-git-send-email-mgorman@suse.deSigned-off-by: NIngo Molnar <mingo@kernel.org>

THP migration uses the page lock to guard against parallel allocations
but there are cases like this still open

  Task A					Task B
  ---------------------				---------------------
  do_huge_pmd_numa_page				do_huge_pmd_numa_page
  lock_page
  mpol_misplaced == -1
  unlock_page
  goto clear_pmdnuma
						lock_page
						mpol_misplaced == 2
						migrate_misplaced_transhuge
  pmd = pmd_mknonnuma
  set_pmd_at

During hours of testing, one crashed with weird errors and while I have
no direct evidence, I suspect something like the race above happened.
This patch extends the page lock to being held until the pmd_numa is
cleared to prevent migration starting in parallel while the pmd_numa is
being cleared. It also flushes the old pmd entry and orders pagetable
insertion before rmap insertion.
Signed-off-by: NMel Gorman <mgorman@suse.de>
Reviewed-by: NRik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1381141781-10992-9-git-send-email-mgorman@suse.deSigned-off-by: NIngo Molnar <mingo@kernel.org>