- 19 6月, 2005 16 次提交
-
-
由 Patrick McHardy 提交于
Herbert Xu wrote: > @@ -1254,6 +1326,7 @@ static int pfkey_add(struct sock *sk, st > if (IS_ERR(x)) > return PTR_ERR(x); > > + xfrm_state_hold(x); This introduces a leak when xfrm_state_add()/xfrm_state_update() fail. We hold two references (one from xfrm_state_alloc(), one from xfrm_state_hold()), but only drop one. We need to take the reference because the reference from xfrm_state_alloc() can be dropped by __xfrm_state_delete(), so the fix is to drop both references on error. Same problem in xfrm_user.c. Signed-off-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
This patch removes XFRM_SAP_* and converts them over to XFRM_MSG_*. The netlink interface is meant to map directly onto the underlying xfrm subsystem. Therefore rather than using a new independent representation for the events we can simply use the existing ones from xfrm_user. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch fixes policy deletion in xfrm_user so that it sets km_event.data.byid. This puts xfrm_user on par with what af_key does in this case. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch turns km_event.data into a union. This makes code that uses it clearer. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch adjusts the SA state conversion in af_key such that XFRM_STATE_ERROR/XFRM_STATE_DEAD will be converted to SADB_STATE_DEAD instead of SADB_STATE_DYING. According to RFC 2367, SADB_STATE_DYING SAs can be turned into mature ones through updating their lifetime settings. Since SAs which are in the states XFRM_STATE_ERROR/XFRM_STATE_DEAD cannot be resurrected, this value is unsuitable. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Herbert Xu 提交于
This patch ensures that the hard state/policy expire notifications are only sent when the state/policy is successfully removed from their respective tables. As it is, it's possible for a state/policy to both expire through reaching a hard limit, as well as being deleted by the user. Note that this behaviour isn't actually forbidden by RFC 2367. However, it is a quality of implementation issue. As an added bonus, the restructuring in this patch will help eventually in moving the expire notifications from softirq context into process context, thus improving their reliability. One important side-effect from this change is that SAs reaching their hard byte/packet limits are now deleted immediately, just like SAs that have reached their hard time limits. Previously they were announced immediately but only deleted after 30 seconds. This is bad because it prevents the system from issuing an ACQUIRE command until the existing state was deleted by the user or expires after the time is up. In the scenario where the expire notification was lost this introduces a 30 second delay into the system for no good reason. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Jamal Hadi Salim 提交于
Heres the final patch. What this patch provides - netlink xfrm events - ability to have events generated by netlink propagated to pfkey and vice versa. - fixes the acquire lets-be-happy-with-one-success issue Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Martin Waitz 提交于
Martin can maintain the DocBook system for us. Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jan Beulich 提交于
When significant delays happen during boot (e.g. with a kernel debugger, but the problem has also seen in other cases) the timeout for blanking the console may trigger, but the work scheduler may not have been initialized, yet. schedule_work() will oops over the null keventd_wq. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Merge 'upstream-2.6.13' branch of rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
-
由 Linus Torvalds 提交于
Make sure we re-parent itimers, and use BUG_ON() instead of an explicit conditional BUG().
-
由 Mika Kukkonen 提交于
The git commit 794f5bfa accidentally suffers from a previous typo in that file (',' instead of ';' in end of line). Patch included. Signed-off-by: Mika Kukkonen (mikukkon@iki.fi) Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6.git由 Linus Torvalds 提交于
This is a fixed-up version of the broken "upstream-2.6.13" branch, where I re-did the manual merge of drivers/net/r8169.c by hand, and made sure the history is all good.
-
由 Jeff Garzik 提交于
-
- 18 6月, 2005 16 次提交
-
-
由 Russell King 提交于
-
由 David Woodhouse 提交于
-
由 Lee Revell 提交于
Signed-Off-By: NLee Revell <rlrevell@joe-job.com> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Mark Haverkamp 提交于
The fixes for sparse warnings mixed in with the fixups for the raw_srb handler resulted in a bug that showed up in the 32 bit environments when trying to issue calls directly to the physical devices that are part of the arrays (ioctl scsi passthrough). Received from Mark Salyzyn at adaptec. Applied comment from Christoph to remove cpu_to_le32(0) Applied Mark S fix of missing memcpy. It applies to the scsi-misc-2.6 git tree. Signed-off-by: NMark Haverkamp <markh@osdl.org> Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 James Bottomley 提交于
-
由 James Bottomley 提交于
-
由 Linus Torvalds 提交于
-
由 Christoph Hellwig 提交于
There are many drivers that have been setting the generic driver model level shutdown callback, and pci thus must not override it. Without this patch we can have really bad data loss on various raid controllers. Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Jeff Garzik 提交于
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
Drivers need not implement a hook that returns FAILED, and does nothing else, since the SCSI midlayer code will do that for us. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Jeff Garzik 提交于
The SCSI ->done() hook should not be called from inside a spinlock. Drivers that do this are mostly cut-n-paste from 2.2.x-era. Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
-
由 Ingo Molnar 提交于
Do all timer zapping in exit_itimers. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 6月, 2005 8 次提交
-
-
由 Kiyoshi Ueda 提交于
__cfq_get_queue(). __cfq_get_queue() finds an existing queue (struct cfq_queue) of the current process for the device and returns it. If it's not found, __cfq_get_queue() creates and returns a new one if __cfq_get_queue() is called with __GFP_WAIT flag, or __cfq_get_queue() returns NULL (this means that get_request() fails) if no __GFP_WAIT flag. On the other hand, in __make_request(), get_request() is called without __GFP_WAIT flag at the first time. Thus, the get_request() fails when there is no existing queue, typically when it's called for the first I/O request of the process to the device. Though it will be followed by get_request_wait() for general case, __make_request() will just end the I/O with an error (EWOULDBLOCK) when the request was for read-ahead. Signed-off-by: NJens Axboe <axboe@suse.de> Signed-off-by: NKiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
-
由 Linus Torvalds 提交于
-
由 Nicolas Pitre 提交于
Patch from Nicolas Pitre Without this some devices fail to work again after a suspend event. Signed-off-by: Nicolas Pitre Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The initial IB2 addresses did not depend on the IB2 base. This patch defines them as (VERSATILE_IB2_BASE + offset). Signed-off-by: Catalin Marinas Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The GPIO base for Integrator/CP is different from the Integrator/AP. This patch sets the correct value for INTEGRATOR_GPIO_BASE. Signed-off-by: Catalin Marinas Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Catalin Marinas 提交于
Patch from Catalin Marinas The current red and blue colours on the Versatile CLCD are reversed when the 5:6:5 mode is used. The patch sets the proper bit in the SYS_CLCD register value. Signed-off-by: Catalin Marinas Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Linus Torvalds 提交于
-