In point-to-point mode, we need to save the source MAC
from received FLOGI requests to use as the destination MAC
for all outgoing frames.  We stopped doing that at some point.

Use the lport_set_port_id method to catch incoming FLOGI frames
and pass them to fcoe_ctlr_recv_flogi() so it can save the source MAC.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The debug message that indicated we are using non-FIP mode was
being printed only if we were already in non-FIP mode.
Also changed the message text to make it more clear the mode
is being set, not that the message is indicating how FLOGI
was received.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

In point-to-point mode, the destination MAC address for
the FLOGI response was zero because the LS_ACC for the FLOGI
wasn't getting intercepted by FIP.

Change to call fcoe_ctlr_els_send when sending any ELS,
not just requests.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

In point-to-point mode, if the PLOGI to the remote port times
out, it can get deleted by the remote port module.  Since there's
no reference by the local port, lport->ptp_data points to a freed
rport, and when the local port is reset and tries to logout again,
an oops occurs in mutex_lock_nested().

Hold a reference count on the point-to-point rdata.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The FCP command header definition should define a mask for
the task attribute field.  This adds that #define.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Reduce indentation in fc_rport_recv_prli_req() using gotos.
Also add payload length checks.
Signed-off-by: NJoe Eykholt <jeykholt@cisco.com>
Signed-off-by: NRobert Love <robert.w.love@intel.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch replaces incorrect base address space flag with correct IO
resource flag.  Also, performs check of memory resource to validate
resource before using.
Signed-off-by: NRichard A Lary <rlary@linux.vnet.ibm.com>
Acked-by: N"Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The variable bfa_itnim is initialized twice to the same (side effect-free)
expression.  Drop one initialization.

A simplified version of the semantic match that finds this problem is:
(http://coccinelle.lip6.fr/)

// <smpl>
@forall@
idexpression *x;
identifier f!=ERR_PTR;
@@

x = f(...)
... when != x
(
x = f(...,<+...x...+>,...)
|
* x = f(...)
)
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NJing Huang <huangj@brocade.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

struct pmcraid_ioctl_header member buffer_length is unsigned, so this
check appears redundant.
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Acked-by: NAnil Ravindranath <anil_ravindranath@pmc-sierra.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This allows i == MAXHA, which is out of range
Signed-off-by: NRoel Kluin <roel.kluin@gmail.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The region set by the call to memset is immediately overwritten by the
subsequent call to memcpy.

The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
expression e1,e2,e3,e4;
@@

- memset(e1,e2,e3);
  memcpy(e1,e4,e3);
// </smpl>
Signed-off-by: NJulia Lawall <julia@diku.dk>
Acked-by: NJack Wang <jack_wang@usish.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

external host not connecting after controller reboot: The
problem is : devices are not coming back after having the cable
disconnected then reconnected. The problem is because the
driver/firmware device removal handshake is failing. Due to this failure,
the controller firmware is not sending out device add events when the target
is reconnected. This is root caused to a race in the driver/firmware device
removal algorithm. There is duplicate code in both interrupt and user
context; where target reset is being issue from user context path while
sas_iounit_control(OP_REMOVE) is being sent from interrupt context. An
active target_reset will fail the OP_REMOVE. To fix this problem, the
duplicate code has been removed from user context path.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Upgraded version string.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Reviewed-by: NEric Moore <eric.moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

modified _scsih_sas_device_find_by_handle
so to handle the search on both list(device list and device_init_list)
Also, we moved the priority of the
search so the ioc->sas_device_list is done first.  The
"sas_device_init_list" is only used during the 1st port enable, so its
unlikely there’s devices on it.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Reviewed-by: NEric Moore <eric.moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Add the cancel_pending_work flag from the fw_event_work structure, and then to
set the flag during host reset, check the flag later from work threads
context and if cancel_pending_work_flag is set ingore those events.

Now Rescan after host reset is changed.
Added special task MPT2SAS_RESCAN_AFTER_HOST_RESET. This task will be queued
at the time of HBA reset. this task is treated as barrier. All work after
MPT2SAS_RESCAN_AFTER_HOST_RESET will be treated as new work and will be
server by callback handle. If host_recovery is going on while running RESCAN
task, it will wait for shos_recovery_done completion which will be called
from HBA reset DONE context.
Signed-off-by: NKashyap Desai <kashyap.desai@lsi.com>
Reviewed-by: NEric Moore <eric.moore@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

The rport structure defines dev_loss_tmo as u32, which is
later multiplied with HZ to get the actual timeout value.
This might overflow for large dev_loss_tmo values. So we
should be better using u64 as intermediate variables here
to protect against overflow.
Signed-off-by: NHannes Reinecke <hare@suse.de>
Acked-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

scsi_dma_map() returns -1 if an error occurred (zero means that the
command has no data). So the following current code can't catch an
error:

sges_left = scsi_dma_map(scmd);
if (!sges_left) {
	sdev_printk(KERN_ERR, scmd->device, "pci_map_sg"
	" failed: request for %d bytes!\n", scsi_bufflen(scmd));
	return -ENOMEM;
}
Signed-off-by: NFUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Acked-by: N"Desai, Kashyap" <Kashyap.Desai@lsi.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This patch updates the 3ware maintainers in the MAINTAINERS file.
Signed-off-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

This small patch forces 60 second timeouts for the older 3w-xxxx &
3w-9xxx drivers for systems that don't contain the udev rule for
setting scsi timeouts to 60 seconds.
Signed-off-by: NAdam Radford <aradford@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Stanse found that one error path in qla24xx_bsg_timeout omits to
unlock ha->hardware_lock. Fix that.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NGiridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Stanse found that two error paths in lpfc_bsg_rport_els_cmp and
lpfc_issue_ct_rsp_cmp omits to unlock phba->ct_ev_lock. It is
because they wrongly unlock phba->hbalock instead. Fix that.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NJames Smart <james.smart@emulex.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

Stanse found that one error path in mgmt_invalidate_icds omits to unlock
ctrl->mbox_lock. Fix that.

Added in 756d29c8 (Enable async mode for mcc rings)
where the spinlock was moved.
Signed-off-by: NJiri Slaby <jslaby@suse.cz>
Acked-by: NJayamohan Kallickal <jayamohank@serverengines.com>
Reviewed-by: NMike Christie <michaelc@cs.wisc.edu>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

adpt_i2o_delete_hba() calls kfree() so we have to save "pHba->next"
before calling it.  Also inside adpt_i2o_delete_hba() itself, there
was another use after free bug which I fixed by moving the kfree()
down a line.
Signed-off-by: NDan Carpenter <error27@gmail.com>
Signed-off-by: NJames Bottomley <James.Bottomley@suse.de>

* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
  libata: Fix accesses at LBA28 boundary (old bug, but nasty) (v2)

Most drives from Seagate, Hitachi, and possibly other brands,
do not allow LBA28 access to sector number 0x0fffffff (2^28 - 1).
So instead use LBA48 for such accesses.

This bug could bite a lot of systems, especially when the user has
taken care to align partitions to 4KB boundaries. On misaligned systems,
it is less likely to be encountered, since a 4KB read would end at
0x10000000 rather than at 0x0fffffff.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Merge branch 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'sched-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  sched: Fix sched_getaffinity()

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6:
  ide: Fix IDE taskfile with cfq scheduler
  ide: Must hold queue lock when requeueing
  ide: Requeue request after DMA timeout

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
  ACPI / PM: Move ACPI video resume to a PM notifier
  ACPI: Reduce ACPI resource conflict message to KERN_WARNING, printk cleanup
  ACPI: battery drivers should call power_supply_changed()
  ACPI: battery: Fix CONFIG_ACPI_SYSFS_POWER=n
  PNPACPI: truncate _CRS windows with _LEN > _MAX - _MIN + 1
  ACPI: Don't send KEY_UNKNOWN for random video notifications
  ACPI: NUMA: map pxms to low node ids
  ACPI: use _HID when supplied by root-level devices
  ACPI / ACPICA: Do not check reference counters in acpi_ev_enable_gpe()
  ACPI: fixes a false alarm from lockdep
  ACPI dock: support multiple ACPI dock devices
  ACPI: EC: Allow multibyte access to EC

* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus:
  hvc_console: Fix race between hvc_close and hvc_remove
  virtio: disable multiport console support.
  virtio: console makes incorrect assumption about virtio API
  virtio: console: Fix early_put_chars usage
  MAINTAINERS: Put the virtio-console entry in correct alphabetical order

I don't claim to understand the tty layer, but it seems like hvc_open and
hvc_close should be balanced in their kref reference counting.

Right now we get a kref every call to hvc_open:

        if (hp->count++ > 0) {
                tty_kref_get(tty); <----- here
                spin_unlock_irqrestore(&hp->lock, flags);
                hvc_kick();
                return 0;
        } /* else count == 0 */

        tty->driver_data = hp;

        hp->tty = tty_kref_get(tty); <------ or here if hp->count was 0

But hvc_close has:

        tty_kref_get(tty);

        if (--hp->count == 0) {
...
                /* Put the ref obtained in hvc_open() */
                tty_kref_put(tty);
...
        }

        tty_kref_put(tty);

Since the outside kref get/put balance we only do a single kref_put when
count reaches 0.

The patch below changes things to call tty_kref_put once for every
hvc_close call, and with that my machine boots fine.
Signed-off-by: NAnton Blanchard <anton@samba.org>
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move MULTIPORT feature and related config changes
out of exported headers, and disable the feature
at runtime.

At this point, it seems less risky to keep code around
until we can enable it than rip it out completely.
Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The get_buf() API sets the second arg to the number of bytes *written*
by the other side; in this case it should be zero as these are output buffers.

lguest gets this right (obviously kvm's console doesn't), resulting in
continual buildup of console writes.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NAmit Shah <amit.shah@redhat.com>

Currently early_put_chars is not used by virtio_console because it can
only be used once a port has been found, at which point it's too late
because it is no longer needed. This patch should fix it.
Acked-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Move around the entry for virtio-console to keep the file sorted.
Signed-off-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

rwsems can be used with IRQs disabled, particularily in early boot
before IRQs are enabled.  Currently the spin_unlock_irq() usage in the
slow-patch will unconditionally enable interrupts and cause problems
since interrupts are not yet initialized or enabled.

This patch uses save/restore versions of IRQ spinlocks in the slowpath
to ensure interrupts are not unintentionally disabled.
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

	If nfs atomic open implementation ends up doing open request from
->d_revalidate() codepath and gets an error from server, return that error
to caller explicitly and don't bother with lookup_instantiate_filp() at all.
->d_revalidate() can return an error itself just fine...

See
	http://bugzilla.kernel.org/show_bug.cgi?id=15674
	http://marc.info/?l=linux-kernel&m=126988782722711&w=2

for original report.
Reported-by: NDaniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Merge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf, x86: Enable Nehalem-EX support
  perf kmem: Fix breakage introduced by 5a0e3ad6 slab.h script

Merge branch 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci

* 'davinci-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-davinci:
  davinci: fix compile warning: <mach/da8xx.h>: #include <linux/platform_device.h>
  davinci: DM365: fix duplicate default IRQ priorities
  davinci: edma: clear events in edma_start()
  davinci: da8xx/omap-l1: fix build error when CONFIG_DAVINCI_MUX is undefined
  davinci: timers: don't enable timer until clocksource is initialized

Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip

* 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-tip:
  x86: Fix double enable_IR_x2apic() call on SMP kernel on !SMP boards
  x86: Increase CONFIG_NODES_SHIFT max to 10
  ibft, x86: Change reserve_ibft_region() to find_ibft_region()
  x86, hpet: Fix bug in RTC emulation
  x86, hpet: Erratum workaround for read after write of HPET comparator
  bootmem, x86: Fix 32bit numa system without RAM on node 0
  nobootmem, x86: Fix 32bit numa system without RAM on node 0
  x86: Handle overlapping mptables
  x86: Make e820_remove_range to handle all covered case
  x86-32, resume: do a global tlb flush in S4 resume

This hushes the following warning:

arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: ‘struct platform_device’
declared inside parameter list
arch/arm/mach-davinci/include/mach/da8xx.h:104: warning: its scope is only this
definition or declaration, which is probably not what you want
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NKevin Hilman <khilman@deeprootsystems.com>