- 08 7月, 2005 18 次提交
-
-
由 Manu Abraham 提交于
o Make the inversion setting specific, ie, only for the 200103A DVB-S This should not be flagged on other cards. o Make the frequency setting card specific o Make the bandwidth setting generic such that it supports more DVB-T cards o Set QAM size for DVB-C cards that do not autodetect QAM size o Fix a bug that caused the polarization not to be set. Set polarization for cards that do not autodetect polarization o Fix a bogus frontend signal lock, that caused a tuning delay as well. o Make the Symbolrate setting card specific Signed-off-by: NManu Abraham <manu@kromtek.com> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Patrick Boettcher 提交于
The flexcop chip often stops generating interrupts after some hours of operation. Apparently this can be fixed by resetting register block 0x300 at each channel change (this is not detailed in the flexcop data books). This patch also restructures DMA handling and adds a bit of debug code for the irq problem in case it still happens for someone. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Patrick Boettcher 提交于
Add big-endian register definitions for running on a PowerPC. (Thanks to Paavo Hartikainen for testing.) Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andreas Oberritter 提交于
Add driver for the Satelco Easywatch Mobile DVB-T card (based on Pluto2 chip). Signed-off-by: NAndreas Oberritter <obi@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Increase some timeouts by a factor of 10 as suggested by Mikko Hamalainen and Timo Ketolainen, to improve tuning for QAM128 / weak signal. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Disable zig-zag and set min_delay_ms = 4000 as suggested by Allan Guild to improve tuning with weak signal. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Patrick Boettcher 提交于
Add .get_tune_settings callback (min_delay_ms = 1sec) and output_mode-field (parallel/serial) to support cxusb; minor cleanups. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hartmut Hackmann 提交于
o added preliminary support for tda827x tuners o set parameters for drift compensation to 0 makes no sense for DVB-T but can prevent lock Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Anssi Hannula 提交于
Add missing release_firmware() calls to fix memory leaks. Signed-off-by: NAnssi Hannula <anssi.hannula@gmail.com> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hartmut Hackmann 提交于
Fix limit for firmware version check was too low for tda10045. Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hartmut Hackmann 提交于
o added config options for IF frequency and AGC o support DSP boot from on board eeprom o added pll sleep call Signed-off-by: NHartmut Hackmann <hartmut.hackmann@t-online.de> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Remove I2C_DRIVERID_DVBFE_ cruft. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Beutner 提交于
- remove void casts - not necessary to set filter state twice to STATE_FREE during dvb_dmxdev_init() Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Beutner 提交于
In dvb_dmxdev_filter_start if we go out because of an error, release previously allocated demux_feed. Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrew de Quincey 提交于
Add workaround for signal lock loss issue, where the frontend loses the signal after some hours without any visible reason. Signed-off-by: NAndrew de Quincey <adq_dvb@lidskialf.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Peter Beutner 提交于
Fix a race condition where an application which issued a FE_READ_STATUS ioctl directly after FE_SET_FRONTEND would see an old status, i.e. FE_READ_STATUS would be executed before the frontend thread has even seen the tungin request from FE_SET_FRONTEND. Signed-off-by: NPeter Beutner <p.beutner@gmx.net> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Remove the skystar2 driver which has been obsoleted by the generalized flexcop-pci driver. Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Martin Loschwitz 提交于
Fixed litte/big-endian conversion for raw remote-control keys. Signed-off-by: NMartin Loschwitz <madkiss@madkiss.org> Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 07 7月, 2005 1 次提交
-
-
由 Eddie C. Dost 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 26 6月, 2005 1 次提交
-
-
由 Christoph Lameter 提交于
1. Establish a simple API for process freezing defined in linux/include/sched.h: frozen(process) Check for frozen process freezing(process) Check if a process is being frozen freeze(process) Tell a process to freeze (go to refrigerator) thaw_process(process) Restart process frozen_process(process) Process is frozen now 2. Remove all references to PF_FREEZE and PF_FROZEN from all kernel sources except sched.h 3. Fix numerous locations where try_to_freeze is manually done by a driver 4. Remove the argument that is no longer necessary from two function calls. 5. Some whitespace cleanup 6. Clear potential race in refrigerator (provides an open window of PF_FREEZE cleared before setting PF_FROZEN, recalc_sigpending does not check PF_FROZEN). This patch does not address the problem of freeze_processes() violating the rule that a task may only modify its own flags by setting PF_FREEZE. This is not clean in an SMP environment. freeze(process) is therefore not SMP safe! Signed-off-by: NChristoph Lameter <christoph@lameter.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 24 6月, 2005 5 次提交
-
-
由 Johannes Stezenbach 提交于
Added support for the Broadcom BCM3510 ATSC (8VSB/16VSB & ITU J83 AnnexB FEC QAM64/256) demodulator used in the first generation of Air2PC ATSC PCI-cards/USB-boxes made by B2C2. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Use time_after() macro. Signed-off-by: NMarcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by: NDomen Puncer <domen@coderock.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Fix error checking during initialization. Thanks to Gerolf Wendland for discovering. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Add generalized dvb-usb driver which supports a wide variety of devices. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
Remove the dibusb driver which has been obsoleted by the generalized dvb-usb driver. Signed-off-by: NPatrick Boettcher <pb@linuxtv.org> Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 21 6月, 2005 1 次提交
-
-
由 gregkh@suse.de 提交于
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 29 5月, 2005 5 次提交
-
-
由 Manu Abraham 提交于
Miscellaneous cleanup Signed-off-by: NManu Abraham <manu@kromtek.com> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Manu Abraham 提交于
Signed-off-by: NManu Abraham <manu@kromtek.com> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Manu Abraham 提交于
Signed-off-by: NManu Abraham <manu@kromtek.com> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Manu Abraham 提交于
Cleanup unnecessary (and undesirable) casts, demodulator_priv is already a void*. Suggestion from Andrew Morton Signed-off-by: NManu Abraham <manu@kromtek.com> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Manu Abraham 提交于
The bug was visible as a warning with gcc-3.4.4 (prerelease) Message: drivers/media/dvb/bt8xx/dst.c:1349: warning: initialization from incompatible pointer type. Signed-off-by: NManu Abraham <manu@kromtek.com> Cc: Johannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 5月, 2005 9 次提交
-
-
由 Johannes Stezenbach 提交于
- remove enable_ci, ci interface is assumed to be present if the saa7113 is not found. - reduce the delay when checking for saa7113 - clean up the cam reset according to specifications - turn off Vcc to the cam slot if cam is removed or fails reset - remove cam reset in ciintf_init - clean up printks (KERN_) - move gpio setting into saa7113_init - clean up unreadable frontend_init (Kenneth Aafloy) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
whitespace cleanup Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
fixed CI debug output (Dominique Dumont) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
fix a bug in the module parameter (Dominique Dumont) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
removed unused module parameter session removed unnecesary delay for FTA cards (Manu Abraham) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
fix for descrambling failure (Dominique Dumont, Manu Abraham) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
fixed a tuning problem for cards based on the old firmware (Steffen Motzer, Manu Abraham) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
add support for the old Twinhan 200103A card (Steffen Motzer) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Johannes Stezenbach 提交于
- reorganize Twinhan DST driver to support CI - add support for more cards (Manu Abraham) Signed-off-by: NJohannes Stezenbach <js@linuxtv.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-