Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 05 10月, 2006 1 次提交
    • D
      IRQ: Maintain regs pointer globally rather than passing to IRQ handlers · 7d12e780
      由 David Howells 提交于 
      Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
      7d12e780
  3. 04 10月, 2006 2 次提交
  5. 02 10月, 2006 1 次提交
  7. 01 10月, 2006 2 次提交
  9. 30 9月, 2006 2 次提交
  11. 23 9月, 2006 1 次提交
  13. 02 9月, 2006 2 次提交
  15. 01 8月, 2006 1 次提交
  17. 31 7月, 2006 1 次提交
  19. 28 7月, 2006 2 次提交
  21. 25 7月, 2006 1 次提交
  23. 11 7月, 2006 3 次提交
    • M
      [PATCH] powermac: Combined fixes for backlight code · e01af038
      由 Michael Hanselmann 提交于 
      This patch fixes several problems:
- pmac_backlight_key() is called under interrupt context, and therefore
  can't use mutexes or semaphores, so defer the backlight level for
  later, as it's not critical (original code by Aristeu S. Rozanski F.
  <aris@valeta.org>).
- Add exports for functions that might be called from modules
- Fix Kconfig depdencies on PMAC_BACKLIGHT.
- Fix locking issues on calls from inside the driver (reported by
  Aristeu S. Rozanski F., too)
- Fix wrong calculation of backlight values in some of the drivers
- Replace pmac_backlight_key_up/down by inline functions

[akpm@osdl.org: fix function prototypes]
Signed-off-by: NMichael Hanselmann <linux-kernel@hansmi.ch>
Acked-by: NAristeu S. Rozanski F. <aris@valeta.org>
Acked-by: NRene Nussbaumer <linux-kernel@killerfox.forkbomb.ch>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      e01af038
    • B
      [PATCH] powerpc: fix SMU driver interrupt mapping · f620753b
      由 Benjamin Herrenschmidt 提交于 
      The SMU driver tries to map an interrupt from the device-tree before the
interrupt controllers in the machine have been enumerated.  This doesn't work
properly and cause machines like the Quad g5 to fail booting later on when
some drivers waits endlessly for an SMU request to complete.  This is the
second problem preventing boot on the Quad g5.  This fixes it and also makes
the SMU driver a bit more resilient to not having an interrupt.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      f620753b
    • B
      [PATCH] powerpc: fix trigger handling in the new irq code · 6e99e458
      由 Benjamin Herrenschmidt 提交于 
      This patch slightly reworks the new irq code to fix a small design error.  I
removed the passing of the trigger to the map() calls entirely, it was not a
good idea to have one call do two different things.  It also fixes a couple of
corner cases.

Mapping a linux virtual irq to a physical irq now does only that.  Setting the
trigger is a different action which has a different call.

The main changes are:

- I no longer call host->ops->map() for an already mapped irq, I just return
  the virtual number that was already mapped.  It was called before to give an
  opportunity to change the trigger, but that was causing issues as that could
  happen while the interrupt was in use by a device, and because of the
  trigger change, map would potentially muck around with things in a racy way.
   That was causing much burden on a given's controller implementation of
  map() to get it right.  This is much simpler now.  map() is only called on
  the initial mapping of an irq, meaning that you know that this irq is _not_
  being used.  You can initialize the hardware if you want (though you don't
  have to).

- Controllers that can handle different type of triggers (level/edge/etc...)
  now implement the standard irq_chip->set_type() call as defined by the
  generic code.  That means that you can use the standard set_irq_type() to
  configure an irq line manually if you wish or (though I don't like that
  interface), pass explicit trigger flags to request_irq() as defined by the
  generic kernel interfaces.  Also, using those interfaces guarantees that
  your controller set_type callback is called with the descriptor lock held,
  thus providing locking against activity on the same interrupt (including
  mask/unmask/etc...) automatically.  A result is that, for example, MPIC's
  own map() implementation calls irq_set_type(NONE) to configure the hardware
  to the default triggers.

- To allow the above, the irq_map array entry for the new mapped interrupt
  is now set before map() callback is called for the controller.

- The irq_create_of_mapping() (also used by irq_of_parse_and_map()) function
  for mapping interrupts from the device-tree now also call the separate
  set_irq_type(), and only does so if there is a change in the trigger type.

- While I was at it, I changed pci_read_irq_line() (which is the helper I
  would expect most archs to use in their pcibios_fixup() to get the PCI
  interrupt routing from the device tree) to also handle a fallback when the
  DT mapping fails consisting of reading the PCI_INTERRUPT_PIN to know wether
  the device has an interrupt at all, and the the PCI_INTERRUPT_LINE to get an
  interrupt number from the device.  That number is then mapped using the
  default controller, and the trigger is set to level low.  That default
  behaviour works for several platforms that don't have a proper interrupt
  tree like Pegasos.  If it doesn't work for your platform, then either
  provide a proper interrupt tree from the firmware so that fallback isn't
  needed, or don't call pci_read_irq_line()

- Add back a bit that got dropped by my main rework patch for properly
  clearing pending IPIs on pSeries when using a kexec
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      6e99e458
  25. 07 7月, 2006 2 次提交
  27. 03 7月, 2006 2 次提交
    • B
      [POWERPC] Add new interrupt mapping core and change platforms to use it · 0ebfff14
      由 Benjamin Herrenschmidt 提交于 
      This adds the new irq remapper core and removes the old one.  Because
there are some fundamental conflicts with the old code, like the value
of NO_IRQ which I'm now setting to 0 (as per discussions with Linus),
etc..., this commit also changes the relevant platform and driver code
over to use the new remapper (so as not to cause difficulties later
in bisecting).

This patch removes the old pre-parsing of the open firmware interrupt
tree along with all the bogus assumptions it made to try to renumber
interrupts according to the platform. This is all to be handled by the
new code now.

For the pSeries XICS interrupt controller, a single remapper host is
created for the whole machine regardless of how many interrupt
presentation and source controllers are found, and it's set to match
any device node that isn't a 8259.  That works fine on pSeries and
avoids having to deal with some of the complexities of split source
controllers vs. presentation controllers in the pSeries device trees.

The powerpc i8259 PIC driver now always requests the legacy interrupt
range. It also has the feature of being able to match any device node
(including NULL) if passed no device node as an input. That will help
porting over platforms with broken device-trees like Pegasos who don't
have a proper interrupt tree.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      0ebfff14
    • T
      [PATCH] irq-flags: misc drivers: Use the new IRQF_ constants · dace1453
      由 Thomas Gleixner 提交于 
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      dace1453
  29. 02 7月, 2006 1 次提交
  31. 01 7月, 2006 2 次提交
  33. 28 6月, 2006 3 次提交
  35. 27 6月, 2006 2 次提交
  37. 26 6月, 2006 3 次提交
  39. 23 6月, 2006 1 次提交
  41. 11 6月, 2006 1 次提交
  43. 21 4月, 2006 1 次提交
  45. 28 3月, 2006 2 次提交
    • B
      [PATCH] powerpc: Kill _machine and hard-coded platform numbers · e8222502
      由 Benjamin Herrenschmidt 提交于 
      This removes statically assigned platform numbers and reworks the
powerpc platform probe code to use a better mechanism.  With this,
board support files can simply declare a new machine type with a
macro, and implement a probe() function that uses the flattened
device-tree to detect if they apply for a given machine.

We now have a machine_is() macro that replaces the comparisons of
_machine with the various PLATFORM_* constants.  This commit also
changes various drivers to use the new macro instead of looking at
_machine.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>
      e8222502
    • A
      [PATCH] Notifier chain update: API changes · e041c683
      由 Alan Stern 提交于 
      The kernel's implementation of notifier chains is unsafe.  There is no
protection against entries being added to or removed from a chain while the
chain is in use.  The issues were discussed in this thread:

    http://marc.theaimsgroup.com/?l=linux-kernel&m=113018709002036&w=2

We noticed that notifier chains in the kernel fall into two basic usage
classes:

	"Blocking" chains are always called from a process context
	and the callout routines are allowed to sleep;

	"Atomic" chains can be called from an atomic context and
	the callout routines are not allowed to sleep.

We decided to codify this distinction and make it part of the API.  Therefore
this set of patches introduces three new, parallel APIs: one for blocking
notifiers, one for atomic notifiers, and one for "raw" notifiers (which is
really just the old API under a new name).  New kinds of data structures are
used for the heads of the chains, and new routines are defined for
registration, unregistration, and calling a chain.  The three APIs are
explained in include/linux/notifier.h and their implementation is in
kernel/sys.c.

With atomic and blocking chains, the implementation guarantees that the chain
links will not be corrupted and that chain callers will not get messed up by
entries being added or removed.  For raw chains the implementation provides no
guarantees at all; users of this API must provide their own protections.  (The
idea was that situations may come up where the assumptions of the atomic and
blocking APIs are not appropriate, so it should be possible for users to
handle these things in their own way.)

There are some limitations, which should not be too hard to live with.  For
atomic/blocking chains, registration and unregistration must always be done in
a process context since the chain is protected by a mutex/rwsem.  Also, a
callout routine for a non-raw chain must not try to register or unregister
entries on its own chain.  (This did happen in a couple of places and the code
had to be changed to avoid it.)

Since atomic chains may be called from within an NMI handler, they cannot use
spinlocks for synchronization.  Instead we use RCU.  The overhead falls almost
entirely in the unregister routine, which is okay since unregistration is much
less frequent that calling a chain.

Here is the list of chains that we adjusted and their classifications.  None
of them use the raw API, so for the moment it is only a placeholder.

  ATOMIC CHAINS
  -------------
arch/i386/kernel/traps.c:		i386die_chain
arch/ia64/kernel/traps.c:		ia64die_chain
arch/powerpc/kernel/traps.c:		powerpc_die_chain
arch/sparc64/kernel/traps.c:		sparc64die_chain
arch/x86_64/kernel/traps.c:		die_chain
drivers/char/ipmi/ipmi_si_intf.c:	xaction_notifier_list
kernel/panic.c:				panic_notifier_list
kernel/profile.c:			task_free_notifier
net/bluetooth/hci_core.c:		hci_notifier
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_chain
net/ipv4/netfilter/ip_conntrack_core.c:	ip_conntrack_expect_chain
net/ipv6/addrconf.c:			inet6addr_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_chain
net/netfilter/nf_conntrack_core.c:	nf_conntrack_expect_chain
net/netlink/af_netlink.c:		netlink_chain

  BLOCKING CHAINS
  ---------------
arch/powerpc/platforms/pseries/reconfig.c:	pSeries_reconfig_chain
arch/s390/kernel/process.c:		idle_chain
arch/x86_64/kernel/process.c		idle_notifier
drivers/base/memory.c:			memory_chain
drivers/cpufreq/cpufreq.c		cpufreq_policy_notifier_list
drivers/cpufreq/cpufreq.c		cpufreq_transition_notifier_list
drivers/macintosh/adb.c:		adb_client_list
drivers/macintosh/via-pmu.c		sleep_notifier_list
drivers/macintosh/via-pmu68k.c		sleep_notifier_list
drivers/macintosh/windfarm_core.c	wf_client_list
drivers/usb/core/notify.c		usb_notifier_list
drivers/video/fbmem.c			fb_notifier_list
kernel/cpu.c				cpu_chain
kernel/module.c				module_notify_list
kernel/profile.c			munmap_notifier
kernel/profile.c			task_exit_notifier
kernel/sys.c				reboot_notifier_list
net/core/dev.c				netdev_chain
net/decnet/dn_dev.c:			dnaddr_chain
net/ipv4/devinet.c:			inetaddr_chain

It's possible that some of these classifications are wrong.  If they are,
please let us know or submit a patch to fix them.  Note that any chain that
gets called very frequently should be atomic, because the rwsem read-locking
used for blocking chains is very likely to incur cache misses on SMP systems.
(However, if the chain's callout routines may sleep then the chain cannot be
atomic.)

The patch set was written by Alan Stern and Chandra Seetharaman, incorporating
material written by Keith Owens and suggestions from Paul McKenney and Andrew
Morton.

[jes@sgi.com: restructure the notifier chain initialization macros]
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NChandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: NJes Sorensen <jes@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      e041c683
  47. 27 3月, 2006 1 次提交