Same as the previous patch, but for Kepler2 now
Signed-off-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This adds support for enabling automatic clockgating on nvidia GPUs for
Kepler1. While this is not technically a clockgating level, it does
enable clockgating using the clockgating values initially set by the
vbios (which should be safe to use).

This introduces two therm helpers for controlling basic clockgating:
	nvkm_therm_clkgate_enable() - enables clockgating through
	CG_CTRL, done after initializing the GPU fully
	nvkm_therm_clkgate_fini() - prepares clockgating for suspend or
	driver unload

A lot of this code was originally going to be based off of fermi;
however it turns out that while Fermi's the first line of GPUs that
introduced this kind of power saving, Fermi requires more fine tuned
control of the CG_CTRL registers from the driver while reclocking that
we don't entirely understand yet.

For the simple parts we will be sharing with Fermi for certain however,
we at least add those into a new subdev/therm/gf100.h header.
Signed-off-by: NLyude Paul <lyude@redhat.com>
Reviewed-by: NMartin Peres <martin.peres@free.fr>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Reviewed-by: NGourav Samaiya <gsamaiya@nvidia.com>

Reported-by: NMikko Perttunen <cyndis@kapsi.fi>
Fixes: 6359c982 ("drm/nouveau/mmu/gp10b: fork from gf100")
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Tested-by: NThierry Reding <treding@nvidia.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Discovered by accident while working to use BAR2 access to instmem objects
on more paths.

We've apparently been relying on luck up until now!
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

v2:
 - add nv138 and drop nv13b chipsets (Ilia Mirkin)
 - refactor out status variable and instead mask tsensor (Ilia Mirkin)
 - switch SHADOWed state message away from nvkm_error() (Ilia Mirkin)
 - rename internal temperature variable (Karol Herbst)

v3:
 - use nvkm_trace() for SHADOWed state message (Ben Skeggs)
Signed-off-by: NRhys Kidd <rhyskidd@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Forked from GP107 implementation. Secboot/gr left out as we don't have
signed blobs from NVIDIA in linux-firmware.

(Ben): Was unable to mmiotrace the binary driver for unknown reasons,
       so not able to 100% confirm that no other changes from GP107
       are needed.  Quick testing shows it seems to work well enough
       for display.  Due to NVIDIA dragging their heels on getting
       signed firmware to us, this is the best we can do for now.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101601Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This allows temperature readouts on maxwell2 GPUs.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Upcoming commits make supervisor handling share code between the NV50
and GF119 implementations.  Because of this, and a few other cleanups,
we need to allow some additional customisation.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Forked from GP106 implementation.

Differences:
- 1 PPC/GPC
- Slightly different grctx magics
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Forked from GP106 implementation.

Split out from commit enabling secboot/gr support so that it can be
added to earlier kernels.

Cc: stable@vger.kernel.org	[4.10+]
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.

Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Forked from GP106 implementation.

Split out from commit enabling secboot/gr support so that it can be
added to earlier kernels.

Cc: stable@vger.kernel.org	[4.10+]
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The NV4A (aka NV44A) is an oddity in the family. It only comes in AGP
and PCI varieties, rather than a core PCIE chip with a bridge for
AGP/PCI as necessary. As a result, it appears that the MMU is also
non-functional. For AGP cards, the vast majority of the NV4A lineup,
this worked out since we force AGP cards to use the nv04 mmu. However
for PCI variants, this did not work.

Switching to the NV04 MMU makes it work like a charm. Thanks to mwk for
the suggestion. This should be a no-op for NV4A AGP boards, as they were
using it already.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=70388Signed-off-by: NIlia Mirkin <imirkin@alum.mit.edu>
Cc: stable@vger.kernel.org
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

All the bricks are in place for secure boot to be enabled. This in turn
makes GR usable so enable them all.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

SEC2 is the name given by NVIDIA to the SEC engine post-Fermi (reasons
unknown). Even though it shares the same address range as SEC, its usage
is quite different and this justifies a new engine. Add this engine and
make TOP use it all post-TOP devices should use this implementation and
not the older SEC.

Also quickly add the short gp102 implementation which will be used for
falcon booting purposes.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gp10x' secure boot requires a blob to be run on NVDEC. Expose the falcon
through a dummy device.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

704a6c008b7942bb7f30bb43d2a6bcad7f543662 broke pci msi rearm for g92 GPUs.

g92 needs the nv46_pci_msi_rearm, where g94+ gpus used nv40_pci_msi_rearm.
Reported-by: NAndrew Randrianasulu <randrianasulu@gmail.com>
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Tested on a G92, seems to work. Confirmed by 8 mmiotraces.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Add a dummy PMU device so the PMU falcon is instanciated and can be used
by secure boot.

We could reuse gk20a's implementation here, but it would fight with
secboot over PMU falcon's ownership and secboot will reset the PMU,
preventing it from operating afterwards. Proper handout between secboot
and pmu is coming along with the actual gm20b PMU implementation, so
use this as a temporary solution.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

GP102/GP104 require a harder reset of PMU prior to DEVINIT, or the IFR
image will hang.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Just enough to hookup preinit reset(), which DEVINIT will depend on later.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

From visual inspection of traces, what we currently implement appears to
be identical to GP104.  Seems to work well enough too.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

gm20b's FB has the same capabilities as gm200, minus the ability to
allocate RAM. Create a device that reflects this instead of re-using the
gk20a device which may be incorrect.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Reviewed-By: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

DPAUX registers moved on Kepler, these chipsets were still using the
Fermi implementation for some reason.

This fixes detection of hotplug/sink IRQs on DP connectors.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org

Since gf100 we need a speedo value for calculating the voltage. The readout
will be added in a later patch.
Signed-off-by: NKarol Herbst <karolherbst@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>