Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch fixes a couple of bit update functions in
alsa-kernel/pci/ac97/ac97_codec.c, which could possibly corrupt bits not
in the given mask.
Specifically, it'll clobber unset bits in the target that are not in the
mask, when the corresponding bit in the given new value is set.
Signed-off-by: NJames C Georgas <jgeorgas@rogers.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Fix up for make allyesconfig.
Signed-Off-By: NDavid Howells <dhowells@redhat.com>

Fix the bug in AC97 power-saving mode that the power isn't turned on
when power_save is set to 1 via sysfs during the power off state.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

The attached patch will force building the S/PDIF controls on the PCU
SSID for Asus P5P800-VM motherboard, even if the  AC97_EI_SPDIF bit is
not set.
Signed-off-by: NMagnus Sandin <magnus@sandin.cx>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added the TLV support to AC97 codec driver for addition of
dB range information.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

This patch adds some codec-specific controls for Philips UCB1400 codec.
Signed-off-by: NMike Rapoport <mike@compulab.co.il>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Added CONFIG_SND_AC97_POWER_SAVE kernel config to enable the support
of aggressive AC97 power-saving mode.  In this mode, the AC97
powerdown register bits are dynamically controlled at each open/close
of PCM streams.
The mode is activated via power_save option for snd-ac97-codec
driver.  As default it's off.  It can be turned on/off on the fly
via sysfs, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Orignally proposed by Sam Revitch <sam.revitch@gmail.com>.
Unregister device files at disconnection to avoid the futher accesses.
Also, the dev_unregister callback is removed and replaced with the
combination of disconnect + free.
A new function snd_card_free_when_closed() is introduced, which is
used in USB disconnect callback.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Revert the mixer element names of some Mic controls to the state of
2.6.17.  This should fix the name mismatch in alsactl.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch by Rodolfo Giometti disables the AC97 AUX and VIDEO controls
on the WM9705 when the touchscreen is selected as the AUX and VIDEO
lines are shared with the touch controller.
Changes:-
 o Added AC97_HAS_NO_AUX flag
 o Test for AC97_HAS_NO_AUX flag in snd_ac97_mixer_build()
 o Sets AC97_HAS_NO_VIDEO and AC97_HAS_NO_AUX in patch_wolfson05() when
WM9705 touch driver is selected.
Signed-off-by: NRodolfo Giometti <giometti@linux.it>
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch conditions AC97 control creation by whether or not the
codec is an AD18xx codec. This fixes the case where the default control
would get created and then snd_ac97_mixer_build fails out when creation
of ad18xx specific control would get attempted. This problem was found
and debuged by Marcelo Tosatti.
Signed-off-by: NJaya Kumar <jayakumar.alsa@gmail.com>
Signed-off-by: NJaroslav Kysela <perex@suse.cz>

Move EXPORT_SYMBOL() to adjacent to each exported function/variable.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Signed-off-by: NJames Courtier-Dutton <James@superbug.co.uk>

Modules: AC97 Codec

Added the missing entry for VIA VT1618 codec.
No particular patch is needed, though.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Clean up obsolete workarounds provided only for nm256.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Add the pointer to a static volume resolution table to ac97 template,
so that the drivers can define the volume resolution, too.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Added a codec patch for LM4550.  It sets up a static volume resolution
table.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Added the support of static resolution table support for codecs
that the driver cannot probe the volume resolution properly.

The table pointer should be set in each codec patch.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Semaphore to mutex conversion.

The conversion was generated via scripts, and the result was validated
automatically via a script as well.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec,ATIIXP driver,Intel8x0 driver

This patch adds a new quirk for ac97 hardware that combines the existing
AC97_TUNE_MUTE_LED and AC97_TUNE_HP_ONLY quirks.  This is needed for several
current HP laptops.  Additionally, it adds the HP nx6125 to the
AC97_TUNE_MUTE_LED list.

Fixed for the latest version of ALSA by Takashi Iwai <tiwai@suse.de>.
Signed-off-by: NMatthew Garrett <mjg59@srcf.ucam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Small fix for ALC65x codec, sync with Realtek's driver codes:
- Rename 'IEC958 Playback Route' to 'IEC958 Playback Source' so that
  mixer can handle it properly
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Optimize the code when compiled without CONFIG_PROC_FS for some pci drivers.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Add NULL check in snd_ac97_suspend() and snd_ac97_resume() so that
the caller doesn't have to do it by itself.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Generate a better name string for ac97_bus sysfs interface including
the name of ac97 codec chip.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Remove xxx_t typedefs from the AC97 codec support.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Modules: AC97 Codec

Fixed the confliction of DRA and surround slots 7/8.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Use schedule_timeout_{,un}interruptible() instead of
set_current_state()/schedule_timeout() to reduce kernel size.  Also use
human-time conversion functions instead of hard-coded division to avoid
rounding issues.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Remove snd_runtime_check() macro.
This macro worsens the readability of codes.  They should be either
normal if() or removable asserts.

Also, the assert displays stack-dump, instead of only the last caller
pointer.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This patch cleans last ac97 audio/modem codec interception in
initialization procedures (ac97_mixer_new()) and removes obsolete
SHARED_TYPE 'locking' which prevents from AMC codecs to function
correctly.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Don't use dev.platform_data to store a reference to the containing
ac97_t structure.  Such assignment is redundent since we can deduce the
ac97_t structure location from the contained device structure.  This
sets platform_data free for other purposes.
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
No index is templated for mdoem controls.
Signed-off-by: NSasha Khapyorsky <sashak@smlink.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AD1889 driver,ATIIXP driver,ATIIXP-modem driver,AZT3328 driver
BT87x driver,CMIPCI driver,CS4281 driver,ENS1370/1+ driver
ES1938 driver,ES1968 driver,FM801 driver,Intel8x0 driver
Intel8x0-modem driver,Maestro3 driver,SonicVibes driver,VIA82xx driver
VIA82xx-modem driver,AC97 Codec,AK4531 codec,au88x0 driver
CA0106 driver,CS46xx driver,EMU10K1/EMU10K2 driver,HDA Codec driver
HDA generic driver,HDA Intel driver,ICE1712 driver,ICE1724 driver
KORG1212 driver,MIXART driver,NM256 driver,Trident driver,YMFPCI driver
Replace kcalloc(1,..) with kzalloc().
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Fix the internal speaker problem (e.g. Targa Traveller 826)
with ALC658D codec.  The info is taken from Cyberlink/realtek-modified code.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
The patch fixes the bus_id conflict error when registering two codecs
of the same type (ALSA bug#1334).
Signed-off-by: NBjorge Dijkstra <bjorge@gmx.net>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
Added (minimal) support of VT1617A codec with SPDIF.
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec,PCI drivers
I've made the review changes and as requested I've pasted the RFC by
Nicolas below:-

'I would like to know what people think of the following patch.  It
allows for a codec on an AC97 bus to be shared with other drivers which
are completely unrelated to audio.  It registers a new bus type, and
whenever a codec instance is created then a device for it is also
registered with the driver model using that bus type.  This allows, for
example, to use the extra features of the UCB1400 like the touchscreen
interface and the additional GPIOs and ADCs available on that chip for
battery monitoring.  I have a working UCB1400 touchscreen driver here
that simply registers with the driver model happily working alongside
with audio features using this.'

Changes over RFC:-

  o Now matches codec name within codec group.
  o Added ac97_dev_release() to stop kernel complaining about no release
method for device.
  o Added 'config SND_AC97_BUS' to sound/pci/Kconfig and moved 'config
SND_AC97_CODEC' out with the PCI=n statement.
  o module is now called snd-ac97-bus
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
o Enhanced current WM97xx support to provide additional controls and
  use the kcontrol suffix naming convention.
o Added AC97_HAS_NO_MIC, AC97_HAS_NO_TONE and AC97_HAS_NO_STD_PCM.
o Cleaned up WM97xx related comments.
o Removed some wm9713 double mono controls and replaced with stereo
  controls.
Signed-off-by: NLiam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

AC97 Codec
remove a variable made obsolete by the last change
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>