Right now, on certain architectures, these macros are usable only with
kernel headers. This patch makes it possible to use them with userspace
headers and, as a consequence, not only in BPF samples, but also in BPF
selftests.

On s390, provide the forward declaration of struct pt_regs and cast it
to user_pt_regs in PT_REGS_* macros. This is necessary, because instead
of the full struct pt_regs, s390 exposes only its first member
user_pt_regs to userspace, and bpf_helpers.h is used with both userspace
(in selftests) and kernel (in samples) headers. It was added in commit
466698e6 ("s390/bpf: correct broken uapi for
BPF_PROG_TYPE_PERF_EVENT program type").

Ditto on arm64.

On x86, provide userspace versions of PT_REGS_* macros. Unlike s390 and
arm64, x86 provides struct pt_regs to both userspace and kernel, however,
with different member names.
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Reviewed-by: NStanislav Fomichev <sdf@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Also check for __s390__ instead of __s390x__, just in case bpf_helpers.h
is ever used by 32-bit userspace.
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Reviewed-by: NStanislav Fomichev <sdf@google.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

bpf_helpers.h fails to compile on sparc: the code should be checking
for defined(bpf_target_sparc), but checks simply for bpf_target_sparc.

Also change #ifdef bpf_target_powerpc to #if defined() for consistency.
Signed-off-by: NIlya Leoshkevich <iii@linux.ibm.com>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add simple __uint and __type macro that hide details of how type and
integer values are captured in BTF-defined maps.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Fix signature of bpf_probe_read and bpf_probe_write_user to mark source
pointer as const. This causes warnings during compilation for
applications relying on those helpers.
Signed-off-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The test covered both nmi and tracepoint perf events.
  $ ./test_progs
  ...
  test_send_signal_tracepoint:PASS:tracepoint 0 nsec
  ...
  test_send_signal_common:PASS:tracepoint 0 nsec
  ...
  test_send_signal_common:PASS:perf_event 0 nsec
  ...
  test_send_signal:OK
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

bpf_printk is a macro which is commonly used to print out debug messages
in BPF programs and it was copied in many selftests and samples. Since
all of them include bpf_helpers.h, this change moves the macro there.
Signed-off-by: NMichal Rostecki <mrostecki@opensuse.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Fix bpf_get_current_task() declaration.
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch rides on an existing BPF_PROG_TYPE_CGROUP_SKB test
(test_sock_fields.c) to do a TCP end-to-end test on the new
bpf_sk_storage_* helpers.
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add bpf_sysctl_* and bpf_strtoX helpers to bpf_helpers.h.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add tests for libbpf relocation of static variable references
into the .data, .rodata and .bss sections of the ELF, also add
read-only test for .rodata. All passing:

  # ./test_progs
  [...]
  test_global_data:PASS:load program 0 nsec
  test_global_data:PASS:pass global data run 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .data reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .data reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .bss reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_number:PASS:relocate .rodata reference 925 nsec
  test_global_data_string:PASS:relocate .rodata reference 925 nsec
  test_global_data_string:PASS:relocate .data reference 925 nsec
  test_global_data_string:PASS:relocate .bss reference 925 nsec
  test_global_data_string:PASS:relocate .data reference 925 nsec
  test_global_data_string:PASS:relocate .bss reference 925 nsec
  test_global_data_struct:PASS:relocate .rodata reference 925 nsec
  test_global_data_struct:PASS:relocate .bss reference 925 nsec
  test_global_data_struct:PASS:relocate .rodata reference 925 nsec
  test_global_data_struct:PASS:relocate .data reference 925 nsec
  test_global_data_rdonly:PASS:test .rodata read-only map 925 nsec
  [...]
  Summary: 229 PASSED, 0 FAILED

Note map helper signatures have been changed to avoid warnings
when passing in const data.

Joint work with Daniel Borkmann.
Signed-off-by: NJoe Stringer <joe@wand.net.nz>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NAndrii Nakryiko <andriin@fb.com>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add tests which verify that the new helpers work for both IPv4 and
IPv6, by forcing SYN cookies to always on. Use a new network namespace
to avoid clobbering the global SYN cookie settings.
Signed-off-by: NLorenz Bauer <lmb@cloudflare.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

eBPF "restricted C" code can be compiled with LLVM/clang using target
triplets like armv7l-unknown-linux-gnueabihf and loaded/run with small
cross-compiled gobpf/elf [1] programs without requiring a full BCC
port which is also undesirable on small embedded systems due to its
size footprint. The only missing pieces are these helper macros which
otherwise have to be redefined by each eBPF arm program.

[1] https://github.com/iovisor/gobpf/tree/master/elfSigned-off-by: NAdrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch adds an example in using the new helper
bpf_get_listener_sock().
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch syncs the uapi bpf.h to tools/ and also updates
bpf_herlpers.h in tools/
Signed-off-by: NLawrence Brakmo <brakmo@fb.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This header defines the BPF functions enumerated in uapi/linux.bpf.h
in a callable format. Expand to include all registered functions.
Signed-off-by: NWillem de Bruijn <willemb@google.com>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch adds a C program to show the usage on
skb->sk and bpf_tcp_sock.
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

add bpf_spin_lock C based test that requires latest llvm with BTF support
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Some IR remotes have a directional pad or other pointer-like thing that
can be used as a mouse. Make it possible to decode these types of IR
protocols in BPF.

Cc: netdev@vger.kernel.org
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

David Ahern and Nicolas Dichtel report that the handling of the netns id
0 is incorrect for the BPF socket lookup helpers: rather than finding
the netns with id 0, it is resolving to the current netns. This renders
the netns_id 0 inaccessible.

To fix this, adjust the API for the netns to treat all negative s32
values as a lookup in the current netns (including u64 values which when
truncated to s32 become negative), while any values with a positive
value in the signed 32-bit integer space would result in a lookup for a
socket in the netns corresponding to that id. As before, if the netns
with that ID does not exist, no socket will be found. Any netns outside
of these ranges will fail to find a corresponding socket, as those
values are reserved for future usage.
Signed-off-by: NJoe Stringer <joe@wand.net.nz>
Acked-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NJoey Pabalinas <joeypabalinas@gmail.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add the necessary header definitions to tools for new
msg_pop_data_helper.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add support for new bpf_msg_push_data in libbpf.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

test_maps:
Tests that queue/stack maps are behaving correctly even in corner cases

test_progs:
Tests new ebpf helpers
Signed-off-by: NMauricio Vasquez B <mauricio.vasquez@polito.it>
Acked-by: NSong Liu <songliubraving@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

The helper bpf_skb_vlan_push is needed by next patch, and the helper
bpf_skb_vlan_pop is added for completeness, regarding VLAN helpers.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This patch adds new BPF helper functions, bpf_sk_lookup_tcp() and
bpf_sk_lookup_udp() which allows BPF programs to find out if there is a
socket listening on this host, and returns a socket pointer which the
BPF program can then access to determine, for instance, whether to
forward or drop traffic. bpf_sk_lookup_xxx() may take a reference on the
socket, so when a BPF program makes use of this function, it must
subsequently pass the returned pointer into the newly added sk_release()
to return the reference.

By way of example, the following pseudocode would filter inbound
connections at XDP if there is no corresponding service listening for
the traffic:

  struct bpf_sock_tuple tuple;
  struct bpf_sock_ops *sk;

  populate_tuple(ctx, &tuple); // Extract the 5tuple from the packet
  sk = bpf_sk_lookup_tcp(ctx, &tuple, sizeof tuple, netns, 0);
  if (!sk) {
    // Couldn't find a socket listening for this traffic. Drop.
    return TC_ACT_SHOT;
  }
  bpf_sk_release(sk, 0);
  return TC_ACT_OK;
Signed-off-by: NJoe Stringer <joe@wand.net.nz>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add bpf_skb_cgroup_id and bpf_skb_ancestor_cgroup_id helpers to
bpf_helpers.h to use them in tests and samples.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch add tests for the new BPF_PROG_TYPE_SK_REUSEPORT.

The tests cover:
- IPv4/IPv6 + TCP/UDP
- TCP syncookie
- TCP fastopen
- Cases when the bpf_sk_select_reuseport() returning errors
- Cases when the bpf prog returns SK_DROP
- Values from sk_reuseport_md
- outer_map => reuseport_array

The test depends on
commit 3eee1f75 ("bpf: fix bpf_skb_load_bytes_relative pkt length check")
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add the following verifier tests to cover the cgroup storage
functionality:
1) valid access to the cgroup storage
2) invalid access: use regular hashmap instead of cgroup storage map
3) invalid access: use invalid map fd
4) invalid access: try access memory after the cgroup storage
5) invalid access: try access memory before the cgroup storage
6) invalid access: call get_local_storage() with non-zero flags

For tests 2)-6) check returned error strings.

Expected output:
  $ ./test_verifier
  #0/u add+sub+mul OK
  #0/p add+sub+mul OK
  #1/u DIV32 by 0, zero check 1 OK
  ...
  #280/p valid cgroup storage access OK
  #281/p invalid cgroup storage access 1 OK
  #282/p invalid cgroup storage access 2 OK
  #283/p invalid per-cgroup storage access 3 OK
  #284/p invalid cgroup storage access 4 OK
  #285/p invalid cgroup storage access 5 OK
  ...
  #649/p pass modified ctx pointer to helper, 2 OK
  #650/p pass modified ctx pointer to helper, 3 OK
  Summary: 901 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: NRoman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: NMartin KaFai Lau <kafai@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add missing helper to bpf_helpers.h that is used in tests and samples.
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This patch introduces BPF_ANNOTATE_KV_PAIR to signal the
bpf loader about the btf key_type and value_type of a bpf map.
Please refer to the changes in test_btf_haskv.c for its usage.
Both iproute2 and libbpf loader will then have the same
convention to find out the map's btf_key_type_id and
btf_value_type_id from a map's name.

Fixes: 8a138aed ("bpf: btf: Add BTF support to libbpf")
Suggested-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NMartin KaFai Lau <kafai@fb.com>
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Sync kernel uapi/linux/bpf.h with tools uapi/linux/bpf.h.
Also add the necessary helper define in bpf_helpers.h.
Acked-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

This is simple test over rc-loopback.
Acked-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NSean Young <sean@mess.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add a new test for the seg6local End.BPF action. The following helpers
are also tested:

- bpf_lwt_push_encap within the LWT BPF IN hook
- bpf_lwt_seg6_action
- bpf_lwt_seg6_adjust_srh
- bpf_lwt_seg6_store_bytes

A chain of End.BPF actions is built. The SRH is injected through a LWT
BPF IN hook before entering this chain. Each End.BPF action validates
the previous one, otherwise the packet is dropped. The test succeeds
if the last node in the chain receives the packet and the UDP datagram
contained can be retrieved from userspace.
Signed-off-by: NMathieu Xhonneux <m.xhonneux@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

This runs existing SOCKMAP tests with SOCKHASH map type. To do this
we push programs into include file and build two BPF programs. One
for SOCKHASH and one for SOCKMAP.

We then run the entire test suite with each type.
Signed-off-by: NJohn Fastabend <john.fastabend@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Simple example of fast-path forwarding. It has a serious flaw
in not verifying the egress device index supports XDP forwarding.
If the egress device does not packets are dropped.

Take this only as a simple example of fast-path forwarding.
Signed-off-by: NDavid Ahern <dsahern@gmail.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

The tools header file bpf.h is synced with kernel uapi bpf.h.
The new helper is also added to bpf_helpers.h.
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>

Add a test for fetching xfrm state parameters from a tc program running
on ingress.
Signed-off-by: NEyal Birger <eyal.birger@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

adding bpf's sample program which is using bpf_xdp_adjust_tail helper
by generating ICMPv4 "packet to big" message if ingress packet's size is
bigger then 600 bytes
Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

adding selftests for bpf_xdp_adjust_tail helper. in this synthetic test
we are testing that 1) if data_end < data helper will return EINVAL
2) for normal use case packet's length would be reduced.
Signed-off-by: NNikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>

Add selftest for BPF_CGROUP_INET4_CONNECT and BPF_CGROUP_INET6_CONNECT
attach types.

Try to connect(2) to specified IP:port and test that:
* remote IP:port pair is overridden;
* local end of connection is bound to specified IP.

All combinations of IPv4/IPv6 and TCP/UDP are tested.

Example:
  # tcpdump -pn -i lo -w connect.pcap 2>/dev/null &
  [1] 478
  # strace -qqf -e connect -o connect.trace ./test_sock_addr.sh
  Wait for testing IPv4/IPv6 to become available ... OK
  Load bind4 with invalid type (can pollute stderr) ... REJECTED
  Load bind4 with valid type ... OK
  Attach bind4 with invalid type ... REJECTED
  Attach bind4 with valid type ... OK
  Load connect4 with invalid type (can pollute stderr) libbpf: load bpf \
    program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  0: (b7) r2 = 23569
  1: (63) *(u32 *)(r1 +24) = r2
  2: (b7) r2 = 16777343
  3: (63) *(u32 *)(r1 +4) = r2
  invalid bpf_context access off=4 size=4
  [ 1518.404609] random: crng init done

  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/connect4'
  libbpf: failed to load object './connect4_prog.o'
  ... REJECTED
  Load connect4 with valid type ... OK
  Attach connect4 with invalid type ... REJECTED
  Attach connect4 with valid type ... OK
  Test case #1 (IPv4/TCP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
          Requested: connect(192.168.1.254, 4040) from (*, *) ..
             Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56068)
  Test case #2 (IPv4/UDP):
          Requested: bind(192.168.1.254, 4040) ..
             Actual: bind(127.0.0.1, 4444)
          Requested: connect(192.168.1.254, 4040) from (*, *) ..
             Actual: connect(127.0.0.1, 4444) from (127.0.0.4, 56447)
  Load bind6 with invalid type (can pollute stderr) ... REJECTED
  Load bind6 with valid type ... OK
  Attach bind6 with invalid type ... REJECTED
  Attach bind6 with valid type ... OK
  Load connect6 with invalid type (can pollute stderr) libbpf: load bpf \
    program failed: Permission denied
  libbpf: -- BEGIN DUMP LOG ---
  libbpf:
  0: (b7) r6 = 0
  1: (63) *(u32 *)(r1 +12) = r6
  invalid bpf_context access off=12 size=4

  libbpf: -- END LOG --
  libbpf: failed to load program 'cgroup/connect6'
  libbpf: failed to load object './connect6_prog.o'
  ... REJECTED
  Load connect6 with valid type ... OK
  Attach connect6 with invalid type ... REJECTED
  Attach connect6 with valid type ... OK
  Test case #3 (IPv6/TCP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
          Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
             Actual: connect(::1, 6666) from (::6, 37458)
  Test case #4 (IPv6/UDP):
          Requested: bind(face:b00c:1234:5678::abcd, 6060) ..
             Actual: bind(::1, 6666)
          Requested: connect(face:b00c:1234:5678::abcd, 6060) from (*, *)
             Actual: connect(::1, 6666) from (::6, 39315)
  ### SUCCESS
  # egrep 'connect\(.*AF_INET' connect.trace | \
  > egrep -vw 'htons\(1025\)' | fold -b -s -w 72
  502   connect(7, {sa_family=AF_INET, sin_port=htons(4040),
  sin_addr=inet_addr("192.168.1.254")}, 128) = 0
  502   connect(8, {sa_family=AF_INET, sin_port=htons(4040),
  sin_addr=inet_addr("192.168.1.254")}, 128) = 0
  502   connect(9, {sa_family=AF_INET6, sin6_port=htons(6060),
  inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
  sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
  502   connect(10, {sa_family=AF_INET6, sin6_port=htons(6060),
  inet_pton(AF_INET6, "face:b00c:1234:5678::abcd", &sin6_addr),
  sin6_flowinfo=0, sin6_scope_id=0}, 128) = 0
  # fg
  tcpdump -pn -i lo -w connect.pcap 2> /dev/null
  # tcpdump -r connect.pcap -n tcp | cut -c 1-72
  reading from file connect.pcap, link-type EN10MB (Ethernet)
  17:57:40.383533 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [S], seq 1333
  17:57:40.383566 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [S.], seq 112
  17:57:40.383589 IP 127.0.0.4.56068 > 127.0.0.1.4444: Flags [.], ack 1, w
  17:57:40.384578 IP 127.0.0.1.4444 > 127.0.0.4.56068: Flags [R.], seq 1,
  17:57:40.403327 IP6 ::6.37458 > ::1.6666: Flags [S], seq 406513443, win
  17:57:40.403357 IP6 ::1.6666 > ::6.37458: Flags [S.], seq 2448389240, ac
  17:57:40.403376 IP6 ::6.37458 > ::1.6666: Flags [.], ack 1, win 342, opt
  17:57:40.404263 IP6 ::1.6666 > ::6.37458: Flags [R.], seq 1, ack 1, win
Signed-off-by: NAndrey Ignatov <rdna@fb.com>
Signed-off-by: NAlexei Starovoitov <ast@kernel.org>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>