Grygorii Strashko says:

====================
net: ethernet: ti: clean up and optimizations

This is a preparation series for introducing new switchbase TI CPSW driver which
was originally introduced [1][2] by Ilias Apalodimas <ilias.apalodimas@linaro.org>
and also discussed in private mails and at Netdev x13 confernce.

Following discussions and suggestions (mostly by Andrew and Ivan) we going
to introduce the new driver which is operating in dual-emac mode
by default, thus working as 2 individual network interfaces.
When both interfaces joined the bridge - CPSW driver will enter a switch
mode and discard dual_mac configuration. The CPSW will be switched back
to dual_mac mode if any port leaves the bridge. All configuration is going to be
implemented via switchdev API.

Hence overall change is already very big I'm sending prerequisite patches which
are mostly minor fixes/clean ups and code refactoring to separate common parts
to be reused by both drivers.
Probably the most serious change from functional point of view is Patch 11.

These patches were NFS boot tetested on TI AM335x/AM437x/AM5xx boards.

These patches can be found at:
 git@git.ti.com:~gragst/ti-linux-kernel/gragsts-ti-linux-kernel.git
 branch: lkml-5.1-cpsw-clean-up-v2

changes in v2:
- added new patch 16 to get rid of force type conversation
- other chages metioned in patches
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a preparatory patch to add support for a switchdev based cpsw driver,
move common ethtool functions to separate cpsw-ethtool.c file so that they
can be used across both drivers. It will simplify CPSW driver code
maintenance also.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Switch CPSW driver to use the new MAC SL API.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MAC SL submodule has a lot of common functions between many of TI SoCs
AM335x/AM437x/DRA7(AM57xx), Keystone 2 66AK2HK/E/L/G and K3 AM654, but
there are also differences especially in registers offsets and sets of
supported functions.

This patch introduces the MAC SL submodule API which is intended to provide
a common way to access the MAC SL submodule and hide HW integrations
details.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NSekhar Nori <nsekhar@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

move common hw init code in separate function as preparation for adding new
switchdev driver.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use dma_addr_t for desc_mem_phys and desc_hw_addr to avoid types
conversions.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As a preparatory patch to add a switchdev based cpsw driver move the common
header definitions to cpsw_priv.h. The plan is to develop a new driver on
switchdev driver model and obsolete the current cpsw driver after all
required functions are added to the new driver. This patch allows the same
header file to be re-used on both drivers during the transition period.
Signed-off-by: NIlias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rework probe to group common hw initialization:
- group resources request at the beginning of the probe
- move net device initialization and registration at the end of the probe
- drop cpsw_slave_init
as preparation of refactoring of common hw initialization code to
separate function.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Davinci MDIO in most of the case implemented as module inside of TI
CPSW subsystem and fully depends on CPSW to be enabled, but historically
it's implemented as separate Platform device/driver and defined in DT files
in two ways:
- as standalone node
- as child node of CPSW subsystem.

In later case it's required to split CPSW subsystem "reg" property to
exclude MDIO I/O range which is not useful.

Hence, replace devm_ioremap_resource() with devm_ioremap() to allow define
full I/O range in parent CPSW subsystem without spliting.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Do not delete multicast supervisory packet's (SUPER) entries while flushing
multicast addresses from ALE table cpsw_ale_flush_multicast(). Those
entries have to be added/removed only explicitly.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Now CPSW ALE will set/clean Host port bit in Unregistered Multicast Flood
Mask (UNREG_MCAST_FLOOD_MASK) for every VLAN without checking if this port
belongs to VLAN or not when ALLMULTI mode flag is set for nedev. This is
working in non dual_mac mode, but in dual_mac - it causes
enabling/disabling ALLMULTI flag for both ports.

Hence fix it by adding additional parameter to cpsw_ale_set_allmulti() to
specify ALE port number for which ALLMULTI has to be enabled and check if
port belongs to VLAN before modifying UNREG_MCAST_FLOOD_MASK.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use ALE_PORT_HOST define for host port in cpsw_ale_set_allmulti() instead
of constants.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use correct define ALE_SUPER for ALE Multicast Address Table Entry
Supervisory Packet (SUPER) bit setting instead of ALE_BLOCKED. No issues
were observed till now as it have never been set, but it's going to be used
by new CPSW switch driver.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Drop unnecessary wrapper function cpsw_tx_packet_submit() which is used
only in one place.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use devm_alloc_etherdev_mqs() and simplify code.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Drop pinctrl_pm_select_default_state call from probe as default
pinctrl state is set by DD core.
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use local variable struct device *dev in probe to simplify code.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update cpsw_split_res() to accept struct cpsw_common instead of
struct net_device to simplify code.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All TI drivers CPSW/NETCP can't work without ALE, hence simplify
build of those drivers by always linking cpsw_ale and drop
CONFIG_TI_CPSW_ALE config option.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Both drivers CPSW and EMAC can't work without CPDMA, hence simplify build
of those drivers by always linking davinci_cpdma and drop TI_DAVINCI_CPDMA
config option.
Note. the davinci_emac driver module was changed to "ti_davinci_emac" to
make build work.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace textual license with SPDX-License-Identifier.
Signed-off-by: NGrygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Johannes Berg says:

====================
strict netlink validation

Here's a respin, with the following changes:
 * change message when rejecting unknown attribute types (David Ahern)
 * drop nl80211 patch - I'll apply it separately
 * remove NL_VALIDATE_POLICY - we have a lot of calls to nla_parse()
   that really should be without a policy as it has previously been
   validated - need to find a good way to handle this later
 * include the correct generic netlink change (d'oh, sorry)
====================
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add options to strictly validate messages and dump messages,
sometimes perhaps validating dump messages non-strictly may
be required, so add an option for that as well.

Since none of this can really be applied to existing commands,
set the options everwhere using the following spatch:

    @@
    identifier ops;
    expression X;
    @@
    struct genl_ops ops[] = {
    ...,
     {
            .cmd = X,
    +       .validate = GENL_DONT_VALIDATE_STRICT | GENL_DONT_VALIDATE_DUMP,
            ...
     },
    ...
    };

For new commands one should just not copy the .validate 'opt-out'
flags and thus get strict validation.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Unfortunately, we cannot add strict parsing for all attributes, as
that would break existing userspace. We currently warn about it, but
that's about all we can do.

For new attributes, however, the story is better: nobody is using
them, so we can reject bad sizes.

Also, for new attributes, we need not accept them when the policy
doesn't declare their usage.

David Ahern and I went back and forth on how to best encode this, and
the best way we found was to have a "boundary type", from which point
on new attributes have all possible validation applied, and NLA_UNSPEC
is rejected.

As we didn't want to add another argument to all functions that get a
netlink policy, the workaround is to encode that boundary in the first
entry of the policy array (which is for type 0 and thus probably not
really valid anyway). I put it into the validation union for the rare
possibility that somebody is actually using attribute 0, which would
continue to work fine unless they tried to use the extended validation,
which isn't likely. We also didn't find any in-tree users with type 0.

The reason for setting the "start strict here" attribute is that we
never really need to start strict from 0, which is invalid anyway (or
in legacy families where that isn't true, it cannot be set to strict),
so we can thus reserve the value 0 for "don't do this check" and don't
have to add the tag to all policies right now.

Thus, policies can now opt in to this validation, which we should do
for all existing policies, at least when adding new attributes.

Note that entirely *new* policies won't need to set it, as the use
of that should be using nla_parse()/nlmsg_parse() etc. which anyway
do fully strict validation now, regardless of this.

So in effect, this patch only covers the "existing command with new
attribute" case.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This re-adds the parse and validate functions like nla_parse()
that are now actually strict after the previous rename and were
just split out to make sure everything is converted (and if not
compilation of the previous patch would fail.)
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We currently have two levels of strict validation:

 1) liberal (default)
     - undefined (type >= max) & NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted
     - garbage at end of message accepted
 2) strict (opt-in)
     - NLA_UNSPEC attributes accepted
     - attribute length >= expected accepted

Split out parsing strictness into four different options:
 * TRAILING     - check that there's no trailing data after parsing
                  attributes (in message or nested)
 * MAXTYPE      - reject attrs > max known type
 * UNSPEC       - reject attributes with NLA_UNSPEC policy entries
 * STRICT_ATTRS - strictly validate attribute size

The default for future things should be *everything*.
The current *_strict() is a combination of TRAILING and MAXTYPE,
and is renamed to _deprecated_strict().
The current regular parsing has none of this, and is renamed to
*_parse_deprecated().

Additionally it allows us to selectively set one of the new flags
even on old policies. Notably, the UNSPEC flag could be useful in
this case, since it can be arranged (by filling in the policy) to
not be an incompatible userspace ABI change, but would then going
forward prevent forgetting attribute entries. Similar can apply
to the POLICY flag.

We end up with the following renames:
 * nla_parse           -> nla_parse_deprecated
 * nla_parse_strict    -> nla_parse_deprecated_strict
 * nlmsg_parse         -> nlmsg_parse_deprecated
 * nlmsg_parse_strict  -> nlmsg_parse_deprecated_strict
 * nla_parse_nested    -> nla_parse_nested_deprecated
 * nla_validate_nested -> nla_validate_nested_deprecated

Using spatch, of course:
    @@
    expression TB, MAX, HEAD, LEN, POL, EXT;
    @@
    -nla_parse(TB, MAX, HEAD, LEN, POL, EXT)
    +nla_parse_deprecated(TB, MAX, HEAD, LEN, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, TB, MAX, POL, EXT;
    @@
    -nlmsg_parse_strict(NLH, HDRLEN, TB, MAX, POL, EXT)
    +nlmsg_parse_deprecated_strict(NLH, HDRLEN, TB, MAX, POL, EXT)

    @@
    expression TB, MAX, NLA, POL, EXT;
    @@
    -nla_parse_nested(TB, MAX, NLA, POL, EXT)
    +nla_parse_nested_deprecated(TB, MAX, NLA, POL, EXT)

    @@
    expression START, MAX, POL, EXT;
    @@
    -nla_validate_nested(START, MAX, POL, EXT)
    +nla_validate_nested_deprecated(START, MAX, POL, EXT)

    @@
    expression NLH, HDRLEN, MAX, POL, EXT;
    @@
    -nlmsg_validate(NLH, HDRLEN, MAX, POL, EXT)
    +nlmsg_validate_deprecated(NLH, HDRLEN, MAX, POL, EXT)

For this patch, don't actually add the strict, non-renamed versions
yet so that it breaks compile if I get it wrong.

Also, while at it, make nla_validate and nla_parse go down to a
common __nla_validate_parse() function to avoid code duplication.

Ultimately, this allows us to have very strict validation for every
new caller of nla_parse()/nlmsg_parse() etc as re-introduced in the
next patch, while existing things will continue to work as is.

In effect then, this adds fully strict validation for any new command.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Rather than using NLA_UNSPEC for this type of thing, use NLA_MIN_LEN
so we can make NLA_UNSPEC be NLA_REJECT under certain conditions for
future attributes.

While at it, also use NLA_EXACT_LEN for the struct example.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Michal Kubecek says:

====================
make nla_nest_start() add NLA_F_NESTED flag

One of the comments in recent review of the ethtool netlink series pointed
out that proposed ethnl_nest_start() helper which adds NLA_F_NESTED to
second argument of nla_nest_start() is not really specific to ethtool
netlink code. That is hard to argue with as closer inspection revealed that
exactly the same helper already exists in ipset code (except it's a macro
rather than an inline function).

Another observation was that even if NLA_F_NESTED flag was introduced in
2007, only few netlink based interfaces set it in kernel generated messages
and even many recently added APIs omit it. That is unfortunate as without
the flag, message parsers not familiar with attribute semantics cannot
recognize nested attributes and do not see message structure; this affects
e.g. wireshark dissector or mnl_nlmsg_fprintf() from libmnl.

This is why I'm suggesting to rename existing nla_nest_start() to different
name (nla_nest_start_noflag) and reintroduce nla_nest_start() as a wrapper
adding NLA_F_NESTED flag. This is implemented in first patch which is
mostly generated by spatch. Second patch drops ipset helper macros which
lose their purpose. Third patch cleans up minor coding style issues found
by checkpatch.pl in first patch.

We could leave nla_nest_start() untouched and simply add a wrapper adding
NLA_F_NESTED but that would probably preserve the state when even most new
code doesn't set the flag.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This is a simple cleanup addressing two coding style issues found by
checkpatch.pl in an earlier patch. It's submitted as a separate patch to
keep the original patch as it was generated by spatch.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After the previous commit, both ipset_nest_start() and ipset_nest_end() are
just aliases for nla_nest_start() and nla_nest_end() so that there is no
need to keep them.
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NJozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Even if the NLA_F_NESTED flag was introduced more than 11 years ago, most
netlink based interfaces (including recently added ones) are still not
setting it in kernel generated messages. Without the flag, message parsers
not aware of attribute semantics (e.g. wireshark dissector or libmnl's
mnl_nlmsg_fprintf()) cannot recognize nested attributes and won't display
the structure of their contents.

Unfortunately we cannot just add the flag everywhere as there may be
userspace applications which check nlattr::nla_type directly rather than
through a helper masking out the flags. Therefore the patch renames
nla_nest_start() to nla_nest_start_noflag() and introduces nla_nest_start()
as a wrapper adding NLA_F_NESTED. The calls which add NLA_F_NESTED manually
are rewritten to use nla_nest_start().

Except for changes in include/net/netlink.h, the patch was generated using
this semantic patch:

@@ expression E1, E2; @@
-nla_nest_start(E1, E2)
+nla_nest_start_noflag(E1, E2)

@@ expression E1, E2; @@
-nla_nest_start_noflag(E1, E2 | NLA_F_NESTED)
+nla_nest_start(E1, E2)
Signed-off-by: NMichal Kubecek <mkubecek@suse.cz>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
net/tls: small code cleanup

This small patch set cleans up tls (mostly offload parts).
Other than avoiding unnecessary error messages - no functional
changes here.

v2 (Saeed):
 - fix up Review tags;
 - remove the warning on failure completely.
====================
Reviewed-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

To avoid a sparse warning byteswap the be32 sequence number
before it's stored in the atomic value.  While at it drop
unnecessary brackets and use kernel's u64 type.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There seems to be no reason for tls_ops to be defined in netdevice.h
which is included in a lot of places.  Don't wrap the struct/enum
declaration in ifdefs, it trickles down unnecessary ifdefs into
driver code.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tls_device_sk_destruct being set on a socket used to indicate
that socket is a kTLS device one.  That is no longer true -
now we use sk_validate_xmit_skb pointer for that purpose.
Remove the export.  tls_device_attach() needs to be moved.

While at it, remove the dead declaration of tls_sk_destruct().
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NDirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently when CONFIG_TLS_DEVICE is set each time kTLS
connection is opened and the offload is not successful
(either because the underlying device doesn't support
it or e.g. it's tables are full) a rate limited error
will be printed to the logs.

There is nothing wrong with failing TLS offload.  SW
path will process the packets just fine, drop the
noisy messages.
Signed-off-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: NSimon Horman <simon.horman@netronome.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2019-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Various updates, notably:
 * extended key ID support (from 802.11-2016)
 * per-STA TX power control support
 * mac80211 TX performance improvements
 * HE (802.11ax) updates
 * mesh link probing support
 * enhancements of multi-BSSID support (also related to HE)
 * OWE userspace processing support
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Huazhong Tan says:

====================
code optimizations & bugfixes for HNS3 driver

This patch-set includes code optimizations and bugfixes for the HNS3
ethernet controller driver.

[patch 1/11 - 3/11] fixes some bugs about the IO path

[patch 4/11 - 6/11] includes some optimization and bugfixes
about mailbox handling

[patch 7/11 - 11/11] adds misc code optimizations and bugfixes.

Change log:
V2->V3: fixes comments from Neil Horman, removes [patch 8/12]
V1->V2: adds modification on [patch 8/12]
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It's meaningless to trigger reset when failed to send command to IMP,
because the failure is usually caused by no authority, illegal command
and so on. When that happened, we just need to return the status code
for further debugging.
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch adds a check for the hns3_put_ring_config() to prevent
double free, and for more readable, move the NULL assignment of
priv->ring_data into the hns3_put_ring_config().
Signed-off-by: NHuazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: NPeng Li <lipeng321@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>