The MCIA register is used to access the SFP+ and QSFP connector's
EPROM. It will be used to query the cable info.
Signed-off-by: NArkadi Sharshevsky <arkadis@mellanox.com>
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

David Daney says:

====================
bpf: Changes needed (or desired) for MIPS support

This is a grab bag of changes to the bpf testing infrastructure I
developed working on MIPS eBPF JIT support.  The change to
bpf_jit_disasm is probably universally beneficial, the others are more
MIPS specific.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are two problems:

1) In MIPS the __NR_* macros expand to an expression, this causes the
   sections of the object file to be named like:

  .
  .
  .
  [ 5] kprobe/(5000 + 1) PROGBITS        0000000000000000 000160 ...
  [ 6] kprobe/(5000 + 0) PROGBITS        0000000000000000 000258 ...
  [ 7] kprobe/(5000 + 9) PROGBITS        0000000000000000 000348 ...
  .
  .
  .

The fix here is to use the "asm_offsets" trick to evaluate the macros
in the C compiler and generate a header file with a usable form of the
macros.

2) MIPS syscall numbers start at 5000, so we need a bigger map to hold
the sub-programs.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On MIPS, conditional branches can only span 32k instructions.  To
exceed this limit in the JIT with the BPF maximum of 4k insns, we need
to choose eBPF insns that expand to more than 8 machine instructions.
Use BPF_LD_ABS as it is quite complex.  This forces the JIT to invert
the sense of the branch to branch around a long jump to the end.

This (somewhat) verifies that the branch inversion logic and target
address calculation of the long jumps are done correctly.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Dynamically allocate memory so that JIT images larger than the size of
the statically allocated array can be handled.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Yonghong Song says:

====================
bpf: permit bpf program narrower loads for ctx fields

Today, if users try to access a ctx field through a narrower load, e.g.,
__be16 prot = __sk_buff->protocol, verifier will fail.
This set contains the verifier change to permit such loads for
certain ctx fields as well as the new test cases in selftests/bpf.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add test cases in test_verifier and test_progs.
Negative tests are added in test_verifier as well.
The test in test_progs will compare the value of narrower ctx field
load result vs. the masked value of normal full-field load result,
and will fail if they are not the same.
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, verifier will reject a program if it contains an
narrower load from the bpf context structure. For example,
        __u8 h = __sk_buff->hash, or
        __u16 p = __sk_buff->protocol
        __u32 sample_period = bpf_perf_event_data->sample_period
which are narrower loads of 4-byte or 8-byte field.

This patch solves the issue by:
  . Introduce a new parameter ctx_field_size to carry the
    field size of narrower load from prog type
    specific *__is_valid_access validator back to verifier.
  . The non-zero ctx_field_size for a memory access indicates
    (1). underlying prog type specific convert_ctx_accesses
         supporting non-whole-field access
    (2). the current insn is a narrower or whole field access.
  . In verifier, for such loads where load memory size is
    less than ctx_field_size, verifier transforms it
    to a full field load followed by proper masking.
  . Currently, __sk_buff and bpf_perf_event_data->sample_period
    are supporting narrowing loads.
  . Narrower stores are still not allowed as typical ctx stores
    are just normal stores.

Because of this change, some tests in verifier will fail and
these tests are removed. As a bonus, rename some out of bound
__sk_buff->cb access to proper field name and remove two
redundant "skb cb oob" tests.
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Signed-off-by: NYonghong Song <yhs@fb.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The macvlan dev should propagate the return value of mac address change for
lower device in the passthru mode, instead of always return 0.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
10GbE Intel Wired LAN Driver Updates 2017-06-13

This series contains updates to ixgbe and ixgbevf only.

Jake completes his fix ups for our drivers with the ixgbe changes to
resolve a race condition in processing timestamp requests.  These fixes
are the same fixes Jake applied earlier to the other drivers, including
the added statistic to help administrators know when an application
timestamp request is ignored.

With all the recent ixgbe/ixgbevf changes and fixes, Tony bumps the
the driver versions.  Then Tony provides a fix to resolve a static
analysis warning by changing a variable to unsigned integer since the
value can never be negative.

Emil fixes an issue for X550 devices where the qde parameter was being
ignored, so PFQDE.HIDE_VLAN was not being set.

Jeff Mahoney from SuSE fixes a possible kernel crash, where there was
a small window where tasks writing to the sriov_numvfs sysfs attribute
can sneak in after we call register_netdev().  So we need to call
pci_set_drvdata() before and not after register_netdev() to preserve the
intent of commit 0fb6a55c ("ixgbe: fix crash on rmmod after probe
fail").
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We call pci_set_drvdata immediately after calling register_netdev,
which leaves a window where tasks writing to the sriov_numvfs sysfs
attribute can sneak in and crash the kernel.  register_netdev cleans
up after itself so placing pci_set_drvdata immediately before it
should preserve the intent of commit 0fb6a55c ("ixgbe: fix crash
on rmmod after probe fail").

Fixes: 0fb6a55c ("ixgbe: fix crash on rmmod after probe fail")
Signed-off-by: NJeff Mahoney <jeffm@suse.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

cppcheck warns that the format string is incorrect in the function
ixgbe_get_strings().  Since the value cannot be negative, change the
variable to unsigned which matches the format specifier.
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

ixgbe_write_qde() was ignoring the qde parameter which resulted
in PFQDE.HIDE_VLAN not being set for X550.
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Update ixgbevf version number.
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Update ixgbe version number.
Signed-off-by: NTony Nguyen <anthony.l.nguyen@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The ixgbe driver has logic to handle only one Tx timestamp at a time,
using a state bit lock to avoid multiple requests at once.

It may be possible, if incredibly unlikely, that a Tx timestamp event is
requested but never completes. Since we use an interrupt scheme to
determine when the Tx timestamp occurred we would never clear the state
bit in this case.

Add an ixgbe_ptp_tx_hang() function similar to the already existing
ixgbe_ptp_rx_hang() function. This function runs in the watchdog routine
and makes sure we eventually recover from this case instead of
permanently disabling Tx timestamps.

Note: there is no currently known way to cause this without hacking the
driver code to force it.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The ixgbe driver can only handle one Tx timestamp request at a time.
This means it is possible for an application timestamp request to be
ignored.

There is no easy way for an administrator to determine if this occurred.
Add a new statistic which tracks this, tx_hwtstamp_skipped.
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The ixgbe driver uses a state bit lock to avoid handling more than one Tx
timestamp request at once. This is required because hardware is limited
to a single set of registers for Tx timestamps.

The state bit lock is not properly cleaned up during
ixgbe_xmit_frame_ring() if the transmit fails such as due to DMA or TSO
failure. In some hardware this results in blocking timestamps until the
service task times out. In other hardware this results in a permanent
lock of the timestamp bit because we never receive an interrupt
indicating the timestamp occurred, since indeed the packet was never
transmitted.

Fix this by checking for DMA and TSO errors in ixgbe_xmit_frame_ring() and
properly cleaning up after ourselves when these occur.
Reported-by: NReported-by: David Mirabito <davidm@metamako.com>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Hardware related to the ixgbe driver is limited to handling a single Tx
timestamp request at a time. Thus, the driver ignores requests for Tx
timestamp while waiting for the current request to finish. It uses
a state bit lock which enforces that only one timestamp request is
honored at a time.

Unfortunately this suffers from a simple race condition. The bit lock is
not cleared until after skb_tstamp_tx() is called notifying applications
of a new Tx timestamp. Even a well behaved application sending only one
packet at a time and waiting for a response can wake up and send a new
packet before the bit lock is cleared. This results in needlessly
dropping some Tx timestamp requests.

We can fix this by unlocking the state bit as soon as we read the
Timestamp register, as this is the first point at which it is safe to
unlock.

To avoid issues with the skb pointer, we'll use a copy of the pointer
and set the global variable in the driver structure to NULL first. This
ensures that the next timestamp request does not modify our local copy
of the skb pointer.

This ensures that well behaved applications do not accidentally race
with the unlock bit. Obviously an application which sends multiple Tx
timestamp requests at once will still only timestamp one packet at
a time. Unfortunately there is nothing we can do about this.
Reported-by: NDavid Mirabito <davidm@metamako.com>
Signed-off-by: NJacob Keller <jacob.e.keller@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Florian Fainelli says:

====================
net: dsa: Multi-CPU ground work (v4)

This patch series prepares the ground for adding mutliple CPU port support to
DSA, and starts by removing redundant pieces of information such as
master_netdev which is cpu_dp->ethernet. Finally drivers are moved away from
directly accessing ds->dst->cpu_dp and use appropriate helper functions.

Note that if you have Device Tree blobs/platform configurations that are
currently listing multiple CPU ports, the proposed behavior in
dsa_ds_get_cpu_dp() will be to return the last bit set in ds->cpu_port_mask.

Future plans include:
- making dst->cpu_dp a flexible data structure (array, list, you name it)
- having the ability for drivers to return a default/preferred CPU port (if
  necessary)

Changes in v4:

- fixed build warning with NETPOLL enabled

Changes in v3:

- removed the last patch since it causes problems with bcm_sf2/b53 in a
  dual-CPU case (root cause known, proper fix underway)

- removed dsa_ds_get_cpu_dp()

Changes in v2:

- added Reviewed-by tags
- assign port->cpu_dp earlier before ops->setup() has run
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce a helper function which will return a reference to the CPU
port used in a dsa_switch_tree. Right now this is a singleton, but this
will change once we introduce multi-CPU port support, so ease the
transition by converting the affected code paths.
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for supporting multiple CPU ports with DSA, have the
dsa_port structure know which CPU it is associated with. This will be
important in order to make sure the correct CPU is used for transmission
of the frames. If not for functional reasons, for performance (e.g: load
balancing) and forwarding decisions.
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Relocate master_ethtool_ops and master_orig_ethtool_ops into struct
dsa_port in order to be both consistent, and make things self contained
within the dsa_port structure.

This is a preliminary change to supporting multiple CPU port interfaces.
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation for supporting multiple CPU ports, remove
dst->master_netdev and ds->master_netdev and replace them with only one
instance of the common object we have for a port: struct
dsa_port::netdev. ds->master_netdev is currently write only and would be
helpful in the case where we have two switches, both with CPU ports, and
also connected within each other, which the multi-CPU port patch series
would address.

While at it, introduce a helper function used in net/dsa/slave.c to
immediately get a reference on the master network device called
dsa_master_netdev().
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If SF bit is not cleared in PL_INT_CAUSE, subsequent non-data
interrupts are not raised.  Enable SF bit in Global Interrupt
Mask and handle it as non-fatal and hence eventually clear it.
Signed-off-by: NRahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: NGanesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The of_mdio_parse_addr() helper function is useful to other code, but
the module dependency chain causes issues.  To work around this, we can
move of_mdio_parse_addr() to be an inline function in the header file.
This gets rid of the dependencies and still allows for the reuse of
code.
Reported-by: NLiviu Dudau <liviu@dudau.co.uk>
Signed-off-by: NJon Mason <jon.mason@broadcom.com>
Fixes: 342fa196 ("mdio: mux: make child bus walking more permissive and errors more verbose")
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The selftests depend on using the shell exit code as a mean of
detecting the success or failure of test-binary executed.  The
appropiate output "[PASS]" or "[FAIL]" in generated by
tools/testing/selftests/lib.mk.

Notice that the exit code is masked with 255. Thus, be careful if
using the number of errors as the exit code, as 256 errors would be
seen as a success.

There are two standard defined exit(3) codes:
 /usr/include/stdlib.h
 #define EXIT_FAILURE    1       /* Failing exit status.  */
 #define EXIT_SUCCESS    0       /* Successful exit status.  */

Fix test_verifier.c to not use the negative value of variable
"results", but instead return EXIT_FAILURE.

Fix test_align.c and test_progs.c to actually use exit codes, before
they were always indicating success regardless of results.
Signed-off-by: NJesper Dangaard Brouer <brouer@redhat.com>
Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
Reviewed-by: NFengguang Wu <fengguang.wu@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove unnecessary setting of flag IFF_BROADCAST, since ether_setup
already does this.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use the recently introduced helper to replace the pattern of
skb_put() && memset(), this transformation was done with the
following spatch:

@@
identifier p;
expression len;
expression skb;
@@
-p = skb_put(skb, len);
-memset(p, 0, len);
+p = skb_put_zero(skb, len);
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Merge tag 'mac80211-next-for-davem-2017-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
A couple of weeks worth of updates - looks like things are quiet:
 * merged net-next back to get a patch from net that another patch
   here depends on
 * various small improvements/cleanups across the board
 * 4-way handshake offload (many thanks to Arend for shepherding that)
 * mesh CSA/DFS support in mac80211
 * the skb_put_zero() we discussed previously
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simon Wunderlich says:

====================
This feature/cleanup patchset includes the following patches:

 - bump version strings, by Simon Wunderlich

 - decrease maximum fragment size, by Matthias Schiffer

 - Clean up seqfile writing, by Markus Elfring (2 patches)

 - use __func__ in debug messages, by Sven Eckelmann

 - Mark tpmeter initializers with __init, by Antonio Quartulli

 - ignore loop detection MAC addresses, by Simon Wunderlich

 - clean up some return handling, by Simon Wunderlich

 - improve ELP throughput value handling for WiFi neighbors
   in BATMAN V/ELP, by Sven Eckelmann (2 patches)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make return value void since function never return meaningfull value
Signed-off-by: NYuval Shaia <yuval.shaia@oracle.com>
Acked-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
MDIO bus reset GPIO cleanups

Commit 4c5e7a2c ("dt-bindings: mdio: Clarify binding document")
declared that a MDIO reset GPIO property should have only a single GPIO
reference/specifier, however the supporting code was left intact...
Here's a couple of the obvious cleanups to that code:

[1/2] mdio_bus: handle only single PHY reset GPIO
[2/2] mdio_bus: use devm_gpiod_get_optional()
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The MDIO reset GPIO is really a classical optional GPIO property case,
so devm_gpiod_get_optional() should have been used, not devm_gpiod_get().
Doing this  saves several LoCs...
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 4c5e7a2c ("dt-bindings: mdio: Clarify binding document")
declared that a MDIO reset GPIO property should have only a single GPIO
reference/specifier, however the supporting code was left intact, still
burdening the kernel with now apparently useless loops -- get rid of them.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When handling a driver reset due to a failover of the backing
server on the vios, doing the netdev_notify_peers() can cause
network traffic to stall or halt. Remove the netdev notify call
for failover resets.
Signed-off-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The IBM vNIC protocol provides support for the user to initiate
a failover from the client LPAR in case the current backing infrastructure
is deemed inadequate or in an error state.

Support for two H_VIOCTL sub-commands for vNIC devices are required
to implement this function. These commands are H_GET_SESSION_TOKEN
and H_SESSION_ERR_DETECTED.

"[H_GET_SESSION_TOKEN] is used to obtain a session token from a VNIC client
adapter.  This token is opaque to the caller and is intended to be used in
tandem with the SESSION_ERROR_DETECTED vioctl subfunction."

"[H_SESSION_ERR_DETECTED] is used to report that the currently active
backing device for a VNIC client adapter is behaving poorly, and that
the hypervisor should attempt to fail over to a different backing device,
if one is available."

To provide tools access to this functionality the vNIC driver creates a
sysfs file that, when written to, will send a request to pHyp to failover
to a different backing device.
Signed-off-by: NThomas Falcon <tlfalcon@linux.vnet.ibm.com>
Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On GOP port 0 two MAC modes are available: GMAC and XLG. The XLG MAC is
used for 10G connectivity. This patch adds a basic 10G support by
allowing to use the XLG MAC on port 0 and by reworking the
port_enable/disable functions so that the XLG MAC is configured when
using 10G.
Signed-off-by: NAntoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: mv88e6xxx: port macros cosmetics

This patch series brings no functional changes.

It prefixes all common port registers macros with MV88E6XXX_PORT.
If registers or some bits differs between switch models, a reference
model is chosen (e.g. MV88E6390_PORT_MAC_CTL_SPEED_10000.)

The register names are documented as found in the datasheets.

Avoid BIT() and shifts defines and prefer a better representation of the
Marvell switch registers with ordered, hexadecimal, 16-bit values.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>