- 31 1月, 2017 2 次提交
-
-
由 Alexander Usyskin 提交于
Request for a notification from a disconnected client will be ignored silently by the FW but the caller should know that the operation hasn't succeeded. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The hardware module should not be unloaded if the bus has active devices. Get get_/put_ bus parent module upon client device connection/disconnection, to prevent the hardware managing module to disappear underneath. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 1月, 2017 2 次提交
-
-
由 Alexander Usyskin 提交于
mei_cl_set_disconnected is used only in client.c, so make it local to the file and mark static. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
mei_io_list_flush is used only in client.c so make it local to the file and mark static. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 1月, 2017 1 次提交
-
-
由 Alexander Usyskin 提交于
The credentials handling was pushed to the write handlers but error handling wasn't done properly. Move write callbacks to completion queue to destroy them and to notify a blocked writer about the failure Fixes: 136698e5 (mei: push credentials inside the irq write handler) Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 30 11月, 2016 1 次提交
-
-
由 Alexander Usyskin 提交于
pm_runtime_autosuspend can take synchronous or asynchronous paths, Because we are calling pm_runtime_mark_last_busy just before this most of the cases it takes the asynchronous way. However, when the FW or driver resets during already running runtime suspend, the call will result in calling to the driver's rpm callback and results in a deadlock on device_lock. The simplest fix is to replace pm_runtime_autosuspend with asynchronous pm_request_autosuspend. Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 17 11月, 2016 2 次提交
-
-
由 Alexander Usyskin 提交于
Split callbacks for RX and async notification events on mei bus to eliminate synchronization problems and to open way for RX optimizations. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Introduce a new host client state, MEI_FILE_UNINITIALIZED, to distinguish client objects that was unlinked, but not destroyed and can be linked again. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 15 11月, 2016 1 次提交
-
-
由 Alexander Usyskin 提交于
Parameter renaming to fop_type was not reflected in KDoc Fixes: 3030dc05 (mei: add wrapper for queuing control commands) Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 10 11月, 2016 1 次提交
-
-
由 Alexander Usyskin 提交于
Prepare the client write functions to set the internal flag in message header. Carry both blocking and internal modes inside the transmit cb, and call internal bus function __mei_cl_send() with send mode bit mask. The Internal flag should be added only on messages generated by the driver. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 27 9月, 2016 1 次提交
-
-
由 Alexander Usyskin 提交于
The stall timer worker checks periodically if there is a stalled i/o transaction. The issue with the current implementation is that the timer is ticking also when there is no pending i/o transaction. This patch provides a simple change that prevents rescheduling of the delayed work when there is no pending i/o. Cc: Andy Lutomirski <luto@kernel.org> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 30 8月, 2016 7 次提交
-
-
由 Alexander Usyskin 提交于
mei_amthif_read have only one difference from mei_read, it is not calling mei_read_start(). Make mei_read_start return immediately for amthif client and drop the special mei_amthif_read function. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Enclose the boiler plate code of allocating a control/hbm command cb and enqueueing it onto ctrl_wr.list in a convenient wrapper mei_cl_enqueue_ctrl_wr_cb(). This is a preparatory patch for enabling consecutive reads. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
With the introduction of the receive control flow credits prefixed with rx_ we add tx_ prefix to the variables and function used for tracking the transmit control flow credits. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Use RX flow control counter in the host client structure to track the number of simultaneous outstanding reads. This eliminates search in queues and makes ground for enabling for parallel read. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The read callbacks for the fixed address clients, that don't have flow control are built now on the receive path. In order to have a single allocation place we remove the allocation from the read request. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The Fixed address clients do not work with the flow control, and the packet RX callback was allocated upon TX with anticipation of a following RX. This won't work if the clients with unsolicited Rx. Rather than preparing read callback upon a write we allocate one directly on the reciev path if one doesn't exists. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
mei_io_cb_alloc_buf have a single caller :mei_cl_alloc_cb. After amthif stopped using it, the code can be integrated into the caller and the function can be dropped. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 11 6月, 2016 1 次提交
-
-
由 Alexander Usyskin 提交于
wr_ctrl waiters are none interruptible, so should be waken up with call to wake_up and not to wake_up_interruptible. This fixes commit: 7ff4bdd4 ("mei: fix waiting for wr_ctrl for corner cases.") Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 01 5月, 2016 3 次提交
-
-
由 Alexander Usyskin 提交于
A control message reply may not be received if either a link reset has occurred or disconnection is initiated by the FW. In the both cases the client state will be set straight to DISCONNECTED and the driver will wait till timeout. Adding DISCONNECTED state in the waiting condition will release the client from the stall. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Timeout on notify request is not a fatal condition, and actually cleaning control queues will disrupt other control flows of the same client. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
In the case when disconnection is initiated from the FW the driver is flushing items from the write control list while iterating over it: mei_irq_write_handler() list_for_each_entry_safe(ctrl_wr_list) <-- outer loop mei_cl_irq_disconnect_rsp() mei_cl_set_disconnected() mei_io_list_flush(ctrl_wr_list) <-- destorying list We move the list flushing to the completion routine. Cc: <stable@vger.kernel.org> #4.2+ Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 21 2月, 2016 1 次提交
-
-
由 Alexander Usyskin 提交于
buf_idx type was changed to size_t, and few places missed out to change the print format from %ld to %zu. Use also uz for buf.size which is also of size_t Fixes: commit 56988f22e097 ("mei: fix possible integer overflow issue")' Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 12 2月, 2016 1 次提交
-
-
由 Alexander Usyskin 提交于
Fix double freeing of the cb that can happen if link reset kicks in the middle of blocked write from a device on the cl bus. Free cb inside mei_cl_write function on failure and drop cb free operation from callers, during a link reset the mei_cl_write function returns with an error, but the caller doesn't know if the cb was already queued or not so it doesn't know if the cb will be freed upon queue reclaim or it has to free it itself. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 08 2月, 2016 11 次提交
-
-
由 Alexander Usyskin 提交于
The amthif FW client can appear after the end of client enumeration. Amthif host client initialization is done now at FW client discovery time. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The reserved host clients can be obsoleted now, a portion of the platforms is shipped without iAMT enabled, where the reservation is not relevant and for platforms with iAMT dynamic allocation is sufficient. Dropping reserved ids makes enumeration more flexible and generic Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The read callback created from a flow control request for a fixed address client have NULL in the file pointer. Fill the file pointer using a data from a write callback. This allows us to drop workaround introduced in: commit eeabfcf5 ("mei: connection to fixed address clients from user-space") Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
Clean write and write_waiting queues in disconnect. Requests in those queues are stale and processing will lead to fat warnings. In multi thread operations on disconnect and in FW disconnect case - write/read/event waiters should end wait and return error. Wake all waiters for disconnecting client to achieve that. Drop wake all and write queue clean on reset, as now we waking all waiters and cleaning write queues on disconnect. No need to do it twice. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
In case of link reset all blocked writes should be interrupted. Note, that currently blocking write is used only through bus layer. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Call wake_up cl->ev_wait only in case there is no bus client registered to the event notification. Second, since we don't have exclusive waiter wake_up_interruptible_all is not used correctly here. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
In this particular case this more correct and safer to check if the RX event is set in the event mask rather than query waitqueue_active Since the check is already performed in the mei_cl_bus_rx_event function, it is just required to check for its return value. Second, since we don't have exclusive waiter wake_up_interruptible_all is not used correctly here. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
Now when we have per client rd_completed list we can remove the amthif specific amthif_rd_complete_list. In addition in the function mei_amthif_read do not loop over the rd_completed list like the original code as the code path is unlocked. Reviewed-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
The driver uses three names file, fp, and file_object for struct file type. To improve code clarity and adjust to my taste rename file_object to more common and shorter fp. Reviewed-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
The struct file file pointer is used as an opaque handle to for a connected client, for this part the pointer should be immutable and should be set to count. Reviewed-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
There is a possible integer overflow following by a buffer overflow when accumulating messages coming from the FW to compose a full payload. Occurrence of wrap around has to be prevented for next message size calculation. For unsigned integer the addition overflow has occurred when the result is smaller than one of the arguments. To simplify the fix, the types of buf.size and buf_idx are set to the same width, namely size_t also to be aligned with the type of length parameter in file read/write ops. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 07 2月, 2016 2 次提交
-
-
由 Alexander Usyskin 提交于
Instead of integrating the iAMT watchdog in the mei core driver we will create a watchdog device on the mei client bus and create a driver for it. This patch removes the watchdog code from the mei core driver. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Alexander Usyskin 提交于
The MEI FW can receive only one flow control for read. Currently the driver only checks if a flow control credit was already sent and read is pending in the rd_pending queue, but it also has to check if flow control credit already queued in the write control queue to prevent sending more than one flow control credits. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 05 8月, 2015 1 次提交
-
-
由 Tomas Winkler 提交于
Remove bogus check on pm_runtime_active that prevented disconnection from a client in case the device was resuming from power gating but not yet active. Fix regression introduced by 18901357 mei: disconnect on connection request timeout Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 04 8月, 2015 2 次提交
-
-
由 Alexander Usyskin 提交于
Enable drivers on mei client bus to subscribe to asynchronous event notifications. Introduce events_mask to the existing callback infrastructure so it is possible to handle both RX and event notification. Signed-off-by: NAlexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Tomas Winkler 提交于
A process can be informed about client notification also via SIGIO with POLL_PRI event. Signed-off-by: NTomas Winkler <tomas.winkler@intel.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-