Now that the read_ctr macro has been specialised for nVHE,
the whole CPU_FTR_REG_HYP_COPY infrastrcture looks completely
overengineered.

Simplify it by populating the two u64 quantities (MMFR0 and 1)
that the hypervisor need.
Reviewed-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>

In protected mode, late CPUs are not allowed to boot (enforced by
the PSCI relay). We can thus specialise the read_ctr macro to
always return a pre-computed, sanitised value. Special care is
taken to prevent the use of this custome version outside of
the protected mode.
Reviewed-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>

When KVM runs in nVHE protected mode, use the host stage 2 to unmap the
hypervisor sections by marking them as owned by the hypervisor itself.
The long-term goal is to ensure the EL2 code can remain robust
regardless of the host's state, so this starts by making sure the host
cannot e.g. write to the .hyp sections directly.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-39-qperret@google.com

The host currently writes directly in EL2 per-CPU data sections from
the PMU code when running in nVHE. In preparation for unmapping the EL2
sections from the host stage 2, disable PMU support in protected mode as
we currently do not have a use-case for it.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-38-qperret@google.com

We will soon unmap the .hyp sections from the host stage 2 in Protected
nVHE mode, which obviously works with at least page granularity, so make
sure to align them correctly.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-37-qperret@google.com

When KVM runs in protected nVHE mode, make use of a stage 2 page-table
to give the hypervisor some control over the host memory accesses. The
host stage 2 is created lazily using large block mappings if possible,
and will default to page mappings in absence of a better solution.

>From this point on, memory accesses from the host to protected memory
regions (e.g. not 'owned' by the host) are fatal and lead to hyp_panic().
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-36-qperret@google.com

We will need to read sanitized values of mmfr{0,1}_el1 at EL2 soon, so
add them to the list of copied variables.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-35-qperret@google.com

Introduce a new stage 2 configuration flag to specify that all mappings
in a given page-table will be identity-mapped, as will be the case for
the host. This allows to introduce sanity checks in the map path and to
avoid programming errors.
Suggested-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-34-qperret@google.com

In order to further configure stage 2 page-tables, pass flags to the
init function using a new enum.

The first of these flags allows to disable FWB even if the hardware
supports it as we will need to do so for the host stage 2.
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-33-qperret@google.com

Since the host stage 2 will be identity mapped, and since it will own
most of memory, it would preferable for performance to try and use large
block mappings whenever that is possible. To ease this, introduce a new
helper in the KVM page-table code which allows to search for large
ranges of available IPA space. This will be used in the host memory
abort path to greedily idmap large portion of the PA space.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-32-qperret@google.com

In order to ease their re-use in other code paths, refactor the
*_map_set_prot_attr() helpers to not depend on a map_data struct.
No functional change intended.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-31-qperret@google.com

As the host stage 2 will be identity mapped, all the .hyp memory regions
and/or memory pages donated to protected guestis will have to marked
invalid in the host stage 2 page-table. At the same time, the hypervisor
will need a way to track the ownership of each physical page to ensure
memory sharing or donation between entities (host, guests, hypervisor) is
legal.

In order to enable this tracking at EL2, let's use the host stage 2
page-table itself. The idea is to use the top bits of invalid mappings
to store the unique identifier of the page owner. The page-table owner
(the host) gets identifier 0 such that, at boot time, it owns the entire
IPA space as the pgd starts zeroed.

Provide kvm_pgtable_stage2_set_owner() which allows to modify the
ownership of pages in the host stage 2. It re-uses most of the map()
logic, but ends up creating invalid mappings instead. This impacts
how we do refcount as we now need to count invalid mappings when they
are used for ownership tracking.
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-30-qperret@google.com

kvm_set_invalid_pte() currently only clears bit 0 from a PTE because
stage2_map_walk_table_post() needs to be able to follow the anchor. In
preparation for re-using bits 63-01 from invalid PTEs, make sure to zero
it entirely by ensuring to cache the anchor's child upfront.
Acked-by: NWill Deacon <will@kernel.org>
Suggested-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-29-qperret@google.com

We will soon need to check if a Physical Address belongs to a memblock
at EL2, so make sure to sort them so this can be done efficiently.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-28-qperret@google.com

Extend the memory pool allocated for the hypervisor to include enough
pages to map all of memory at page granularity for the host stage 2.
While at it, also reserve some memory for device mappings.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-27-qperret@google.com

The current stage2 page-table allocator uses a memcache to get
pre-allocated pages when it needs any. To allow re-using this code at
EL2 which uses a concept of memory pools, make the memcache argument of
kvm_pgtable_stage2_map() anonymous, and let the mm_ops zalloc_page()
callbacks use it the way they need to.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-26-qperret@google.com

Refactor __populate_fault_info() to introduce __get_fault_info() which
will be used once the host is wrapped in a stage 2.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-25-qperret@google.com

Refactor __load_guest_stage2() to introduce __load_stage2() which will
be re-used when loading the host stage 2.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-24-qperret@google.com

In order to re-use some of the stage 2 setup code at EL2, factor parts
of kvm_arm_setup_stage2() out into separate functions.

No functional change intended.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-23-qperret@google.com

Move the registers relevant to host stage 2 enablement to
kvm_nvhe_init_params to prepare the ground for enabling it in later
patches.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-22-qperret@google.com

In order to make use of the stage 2 pgtable code for the host stage 2,
change kvm_s2_mmu to use a kvm_arch pointer in lieu of the kvm pointer,
as the host will have the former but not the latter.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-21-qperret@google.com

In order to make use of the stage 2 pgtable code for the host stage 2,
use struct kvm_arch in lieu of struct kvm as the host will have the
former but not the latter.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-20-qperret@google.com

Previous commits have introduced infrastructure to enable the EL2 code
to manage its own stage 1 mappings. However, this was preliminary work,
and none of it is currently in use.

Put all of this together by elevating the mapping creation at EL2 when
memory protection is enabled. In this case, the host kernel running
at EL1 still creates _temporary_ EL2 mappings, only used while
initializing the hypervisor, but frees them right after.

As such, all calls to create_hyp_mappings() after kvm init has finished
turn into hypercalls, as the host now has no 'legal' way to modify the
hypevisor page tables directly.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-19-qperret@google.com

When memory protection is enabled, the EL2 code needs the ability to
create and manage its own page-table. To do so, introduce a new set of
hypercalls to bootstrap a memory management system at EL2.

This leads to the following boot flow in nVHE Protected mode:

 1. the host allocates memory for the hypervisor very early on, using
    the memblock API;

 2. the host creates a set of stage 1 page-table for EL2, installs the
    EL2 vectors, and issues the __pkvm_init hypercall;

 3. during __pkvm_init, the hypervisor re-creates its stage 1 page-table
    and stores it in the memory pool provided by the host;

 4. the hypervisor then extends its stage 1 mappings to include a
    vmemmap in the EL2 VA space, hence allowing to use the buddy
    allocator introduced in a previous patch;

 5. the hypervisor jumps back in the idmap page, switches from the
    host-provided page-table to the new one, and wraps up its
    initialization by enabling the new allocator, before returning to
    the host.

 6. the host can free the now unused page-table created for EL2, and
    will now need to issue hypercalls to make changes to the EL2 stage 1
    mappings instead of modifying them directly.

Note that for the sake of simplifying the review, this patch focuses on
the hypervisor side of things. In other words, this only implements the
new hypercalls, but does not make use of them from the host yet. The
host-side changes will follow in a subsequent patch.

Credits to Will for __pkvm_init_switch_pgd.
Acked-by: NWill Deacon <will@kernel.org>
Co-authored-by: NWill Deacon <will@kernel.org>
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-18-qperret@google.com

We will soon need to turn the EL2 stage 1 MMU on and off in nVHE
protected mode, so refactor the set_sctlr_el1 macro to make it usable
for that purpose.
Acked-by: NWill Deacon <will@kernel.org>
Suggested-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-17-qperret@google.com

In order to re-map the guest vectors at EL2 when pKVM is enabled,
refactor __kvm_vector_slot2idx() and kvm_init_vector_slot() to move all
the address calculation logic in a static inline function.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-16-qperret@google.com

We will need to do cache maintenance at EL2 soon, so compile a copy of
__flush_dcache_area at EL2, and provide a copy of arm64_ftr_reg_ctrel0
as it is needed by the read_ctr macro.
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-15-qperret@google.com

Introduce the infrastructure in KVM enabling to copy CPU feature
registers into EL2-owned data-structures, to allow reading sanitised
values directly at EL2 in nVHE.

Given that only a subset of these features are being read by the
hypervisor, the ones that need to be copied are to be listed under
<asm/kvm_cpufeature.h> together with the name of the nVHE variable that
will hold the copy. This introduces only the infrastructure enabling
this copy. The first users will follow shortly.
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-14-qperret@google.com

When memory protection is enabled, the hyp code will require a basic
form of memory management in order to allocate and free memory pages at
EL2. This is needed for various use-cases, including the creation of hyp
mappings or the allocation of stage 2 page tables.

To address these use-case, introduce a simple memory allocator in the
hyp code. The allocator is designed as a conventional 'buddy allocator',
working with a page granularity. It allows to allocate and free
physically contiguous pages from memory 'pools', with a guaranteed order
alignment in the PA space. Each page in a memory pool is associated
with a struct hyp_page which holds the page's metadata, including its
refcount, as well as its current order, hence mimicking the kernel's
buddy system in the GFP infrastructure. The hyp_page metadata are made
accessible through a hyp_vmemmap, following the concept of
SPARSE_VMEMMAP in the kernel.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-13-qperret@google.com

In order to use the kernel list library at EL2, introduce stubs for the
CONFIG_DEBUG_LIST out-of-lines calls.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-12-qperret@google.com

With nVHE, the host currently creates all stage 1 hypervisor mappings at
EL1 during boot, installs them at EL2, and extends them as required
(e.g. when creating a new VM). But in a world where the host is no
longer trusted, it cannot have full control over the code mapped in the
hypervisor.

In preparation for enabling the hypervisor to create its own stage 1
mappings during boot, introduce an early page allocator, with minimal
functionality. This allocator is designed to be used only during early
bootstrap of the hyp code when memory protection is enabled, which will
then switch to using a full-fledged page allocator after init.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-11-qperret@google.com

In order to allow the usage of code shared by the host and the hyp in
static inline library functions, allow the usage of kvm_nvhe_sym() at
EL2 by defaulting to the raw symbol name.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-10-qperret@google.com

kvm_call_hyp() has some logic to issue a function call or a hypercall
depending on the EL at which the kernel is running. However, all the
code compiled under __KVM_NVHE_HYPERVISOR__ is guaranteed to only run
at EL2 which allows us to simplify.

Add ifdefery to kvm_host.h to simplify kvm_call_hyp() in .hyp.text.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-9-qperret@google.com

Currently, the hyp code cannot make full use of a bss, as the kernel
section is mapped read-only.

While this mapping could simply be changed to read-write, it would
intermingle even more the hyp and kernel state than they currently are.
Instead, introduce a __hyp_bss section, that uses reserved pages, and
create the appropriate RW hyp mappings during KVM init.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-8-qperret@google.com

In preparation for enabling the creation of page-tables at EL2, factor
all memory allocation out of the page-table code, hence making it
re-usable with any compatible memory allocator.

No functional changes intended.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-7-qperret@google.com

Currently, the KVM page-table allocator uses a mix of put_page() and
free_page() calls depending on the context even though page-allocation
is always achieved using variants of __get_free_page().

Make the code consistent by using put_page() throughout, and reduce the
memory management API surface used by the page-table code. This will
ease factoring out page-allocation from pgtable.c, which is a
pre-requisite to creating page-tables at EL2.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-6-qperret@google.com

Move the initialization of kvm_nvhe_init_params in a dedicated function
that is run early, and only once during KVM init, rather than every time
the KVM vectors are set and reset.

This also opens the opportunity for the hypervisor to change the init
structs during boot, hence simplifying the replacement of host-provided
page-table by the one the hypervisor will create for itself.
Acked-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-5-qperret@google.com

We will soon need to synchronise multiple CPUs in the hyp text at EL2.
The qspinlock-based locking used by the host is overkill for this purpose
and relies on the kernel's "percpu" implementation for the MCS nodes.

Implement a simple ticket locking scheme based heavily on the code removed
by commit c1109047 ("arm64: locking: Replace ticket lock implementation
with qspinlock").
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-4-qperret@google.com

Pull clear_page(), copy_page(), memcpy() and memset() into the nVHE hyp
code and ensure that we always execute the '__pi_' entry point on the
offchance that it changes in future.

[ qperret: Commit title nits and added linker script alias ]
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-3-qperret@google.com

clear_page() and copy_page() are suitable for use outside of the kernel
address space, so annotate them as position-independent code.
Signed-off-by: NWill Deacon <will@kernel.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NMarc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210319100146.1149909-2-qperret@google.com