iommu_flush_dev_iotlb() is called to invalidate caches on a device but
only loops over the devices which are fully-attached to the domain. For
sub-devices, this is ineffective and can result in invalid caching
entries left on the device.

Fix the missing invalidation by adding a loop over the subdevices and
ensuring that 'domain->has_iotlb_device' is updated when attaching to
subdevices.

Fixes: 67b8e02b ("iommu/vt-d: Aux-domain specific domain attach/detach")
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-4-git-send-email-yi.l.liu@intel.comSigned-off-by: NWill Deacon <will@kernel.org>

The aux-domain attach/detach are not tracked, some data structures might
be used after free. This causes general protection faults when multiple
subdevices are created and assigned to a same guest machine:

  | general protection fault, probably for non-canonical address 0xdead000000000100: 0000 [#1] SMP NOPTI
  | RIP: 0010:intel_iommu_aux_detach_device+0x12a/0x1f0
  | [...]
  | Call Trace:
  |  iommu_aux_detach_device+0x24/0x70
  |  vfio_mdev_detach_domain+0x3b/0x60
  |  ? vfio_mdev_set_domain+0x50/0x50
  |  iommu_group_for_each_dev+0x4f/0x80
  |  vfio_iommu_detach_group.isra.0+0x22/0x30
  |  vfio_iommu_type1_detach_group.cold+0x71/0x211
  |  ? find_exported_symbol_in_section+0x4a/0xd0
  |  ? each_symbol_section+0x28/0x50
  |  __vfio_group_unset_container+0x4d/0x150
  |  vfio_group_try_dissolve_container+0x25/0x30
  |  vfio_group_put_external_user+0x13/0x20
  |  kvm_vfio_group_put_external_user+0x27/0x40 [kvm]
  |  kvm_vfio_destroy+0x45/0xb0 [kvm]
  |  kvm_put_kvm+0x1bb/0x2e0 [kvm]
  |  kvm_vm_release+0x22/0x30 [kvm]
  |  __fput+0xcc/0x260
  |  ____fput+0xe/0x10
  |  task_work_run+0x8f/0xb0
  |  do_exit+0x358/0xaf0
  |  ? wake_up_state+0x10/0x20
  |  ? signal_wake_up_state+0x1a/0x30
  |  do_group_exit+0x47/0xb0
  |  __x64_sys_exit_group+0x18/0x20
  |  do_syscall_64+0x57/0x1d0
  |  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix the crash by tracking the subdevices when attaching and detaching
aux-domains.

Fixes: 67b8e02b ("iommu/vt-d: Aux-domain specific domain attach/detach")
Co-developed-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NXin Zeng <xin.zeng@intel.com>
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/1609949037-25291-3-git-send-email-yi.l.liu@intel.comSigned-off-by: NWill Deacon <will@kernel.org>

There is no reason to use GFP_ATOMIC in a 'suspend' function.
Use GFP_KERNEL instead to give more opportunities to allocate the
requested memory.
Signed-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/20201030182630.5154-1-christophe.jaillet@wanadoo.frSigned-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201201013149.2466272-2-baolu.lu@linux.intel.comSigned-off-by: NWill Deacon <will@kernel.org>

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/iommu/intel/iommu.c:5643:27: warning: variable 'last_pfn' set but not used [-Wunused-but-set-variable]
5643 |  unsigned long start_pfn, last_pfn;
     |                           ^~~~~~~~

This variable is never used, so remove it.

Fixes: 2a2b8eaa ("iommu: Handle freelists when using deferred flushing in iommu drivers")
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201127013308.1833610-1-baolu.lu@linux.intel.comSigned-off-by: NWill Deacon <will@kernel.org>

My virtual IOMMU implementation is whining that the guest is reading a
register that doesn't exist. Only read the VCCAP_REG if the corresponding
capability is set in ECAP_REG to indicate that it actually exists.

Fixes: 3375303e ("iommu/vt-d: Add custom allocator for IOASID")
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: NLiu Yi L <yi.l.liu@intel.com>
Cc: stable@vger.kernel.org # v5.7+
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/de32b150ffaa752e0cff8571b17dfb1213fbe71c.camel@infradead.orgSigned-off-by: NWill Deacon <will@kernel.org>

So that the vendor iommu drivers are no more required to provide the
def_domain_type callback to always isolate the untrusted devices.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Cc: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Link: https://lore.kernel.org/linux-iommu/243ce89c33fe4b9da4c56ba35acebf81@huawei.com/
Link: https://lore.kernel.org/r/20201124130604.2912899-2-baolu.lu@linux.intel.comSigned-off-by: NWill Deacon <will@kernel.org>

Some cleanups after converting the driver to use dma-iommu ops.
- Remove nobounce option;
- Cleanup and simplify the path in domain mapping.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Tested-by: NLogan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-8-baolu.lu@linux.intel.comSigned-off-by: NWill Deacon <will@kernel.org>

Convert the intel iommu driver to the dma-iommu api. Remove the iova
handling and reserve region code from the intel iommu driver.
Signed-off-by: NTom Murphy <murphyt7@tcd.ie>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Tested-by: NLogan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-7-baolu.lu@linux.intel.comSigned-off-by: NWill Deacon <will@kernel.org>

The iommu-dma constrains IOVA allocation based on the domain geometry
that the driver reports. Update domain geometry everytime a domain is
attached to or detached from a device.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Tested-by: NLogan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-6-baolu.lu@linux.intel.comSigned-off-by: NWill Deacon <will@kernel.org>

Allow the iommu_unmap_fast to return newly freed page table pages and
pass the freelist to queue_iova in the dma-iommu ops path.

This is useful for iommu drivers (in this case the intel iommu driver)
which need to wait for the ioTLB to be flushed before newly
free/unmapped page table pages can be freed. This way we can still batch
ioTLB free operations and handle the freelists.
Signed-off-by: NTom Murphy <murphyt7@tcd.ie>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Tested-by: NLogan Gunthorpe <logang@deltatee.com>
Link: https://lore.kernel.org/r/20201124082057.2614359-2-baolu.lu@linux.intel.comSigned-off-by: NWill Deacon <will@kernel.org>

Let IOASID users take references to existing ioasids with ioasid_get().
ioasid_put() drops a reference and only frees the ioasid when its
reference number is zero. It returns true if the ioasid was freed.
For drivers that don't call ioasid_get(), ioasid_put() is the same as
ioasid_free().
Signed-off-by: NJean-Philippe Brucker <jean-philippe@linaro.org>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Reviewed-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201106155048.997886-2-jean-philippe@linaro.orgSigned-off-by: NWill Deacon <will@kernel.org>

"intel_iommu=off" command line is used to disable iommu but iommu is force
enabled in a tboot system for security reason.

However for better performance on high speed network device, a new option
"intel_iommu=tboot_noforce" is introduced to disable the force on.

By default kernel should panic if iommu init fail in tboot for security
reason, but it's unnecessory if we use "intel_iommu=tboot_noforce,off".

Fix the code setting force_on and move intel_iommu_tboot_noforce
from tboot code to intel iommu code.

Fixes: 7304e8f2 ("iommu/vt-d: Correctly disable Intel IOMMU force on")
Signed-off-by: NZhenzhong Duan <zhenzhong.duan@gmail.com>
Tested-by: NLukasz Hawrylko <lukasz.hawrylko@linux.intel.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201110071908.3133-1-zhenzhong.duan@gmail.comSigned-off-by: NWill Deacon <will@kernel.org>

Commit 6ee1b77b ("iommu/vt-d: Add svm/sva invalidate function")
introduced intel_iommu_sva_invalidate() when CONFIG_INTEL_IOMMU_SVM.
This function uses the dedicated static variable inv_type_granu_table
and functions to_vtd_granularity() and to_vtd_size().

These parts are unused when !CONFIG_INTEL_IOMMU_SVM, and hence,
make CC=clang W=1 warns with an -Wunused-function warning.

Include these parts conditionally on CONFIG_INTEL_IOMMU_SVM.

Fixes: 6ee1b77b ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: NLukas Bulwahn <lukas.bulwahn@gmail.com>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20201115205951.20698-1-lukas.bulwahn@gmail.comSigned-off-by: NWill Deacon <will@kernel.org>

If calling find_domain() for a device which hasn't been probed by the
iommu core, below kernel NULL pointer dereference issue happens.

[  362.736947] BUG: kernel NULL pointer dereference, address: 0000000000000038
[  362.743953] #PF: supervisor read access in kernel mode
[  362.749115] #PF: error_code(0x0000) - not-present page
[  362.754278] PGD 0 P4D 0
[  362.756843] Oops: 0000 [#1] SMP NOPTI
[  362.760528] CPU: 0 PID: 844 Comm: cat Not tainted 5.9.0-rc4-intel-next+ #1
[  362.767428] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake
               U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3384.A02.1909200816
               09/20/2019
[  362.781109] RIP: 0010:find_domain+0xd/0x40
[  362.785234] Code: 48 81 fb 60 28 d9 b2 75 de 5b 41 5c 41 5d 5d c3 0f 1f 00 66
                     2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 8b 87 e0 02 00
                     00 55 <48> 8b 40 38 48 89 e5 48 83 f8 fe 0f 94 c1 48 85 ff
                     0f 94 c2 08 d1
[  362.804041] RSP: 0018:ffffb09cc1f0bd38 EFLAGS: 00010046
[  362.809292] RAX: 0000000000000000 RBX: ffff905b98e4fac8 RCX: 0000000000000000
[  362.816452] RDX: 0000000000000001 RSI: ffff905b98e4fac8 RDI: ffff905b9ccd40d0
[  362.823617] RBP: ffffb09cc1f0bda0 R08: ffffb09cc1f0bd48 R09: 000000000000000f
[  362.830778] R10: ffffffffb266c080 R11: ffff905b9042602d R12: ffff905b98e4fac8
[  362.837944] R13: ffffb09cc1f0bd48 R14: ffff905b9ccd40d0 R15: ffff905b98e4fac8
[  362.845108] FS:  00007f8485460740(0000) GS:ffff905b9fc00000(0000)
               knlGS:0000000000000000
[  362.853227] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  362.858996] CR2: 0000000000000038 CR3: 00000004627a6003 CR4: 0000000000770ef0
[  362.866161] PKRU: fffffffc
[  362.868890] Call Trace:
[  362.871363]  ? show_device_domain_translation+0x32/0x100
[  362.876700]  ? bind_store+0x110/0x110
[  362.880387]  ? klist_next+0x91/0x120
[  362.883987]  ? domain_translation_struct_show+0x50/0x50
[  362.889237]  bus_for_each_dev+0x79/0xc0
[  362.893121]  domain_translation_struct_show+0x36/0x50
[  362.898204]  seq_read+0x135/0x410
[  362.901545]  ? handle_mm_fault+0xeb8/0x1750
[  362.905755]  full_proxy_read+0x5c/0x90
[  362.909526]  vfs_read+0xa6/0x190
[  362.912782]  ksys_read+0x61/0xe0
[  362.916037]  __x64_sys_read+0x1a/0x20
[  362.919725]  do_syscall_64+0x37/0x80
[  362.923329]  entry_SYSCALL_64_after_hwframe+0x44/0xa9
[  362.928405] RIP: 0033:0x7f84855c5e95

Filter out those devices to avoid such error.

Fixes: e2726dae ("iommu/vt-d: debugfs: Add support to show page table internals")
Reported-and-tested-by: NXu Pengfei <pengfei.xu@intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Cc: stable@vger.kernel.org#v5.6+
Link: https://lore.kernel.org/r/20201028070725.24979-1-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The tbl_dma_addr argument is used to check the DMA boundary for the
allocations, and thus needs to be a dma_addr_t.  swiotlb-xen instead
passed a physical address, which could lead to incorrect results for
strange offsets.  Fix this by removing the parameter entirely and hard
code the DMA address for io_tlb_start instead.

Fixes: 91ffe4ad ("swiotlb-xen: introduce phys_to_dma/dma_to_phys translations")
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NStefano Stabellini <sstabellini@kernel.org>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Merge dma-contiguous.h into dma-map-ops.h, after removing the comment
describing the contiguous allocator into kernel/dma/contigous.c.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Split out all the bits that are purely for dma_map_ops implementations
and related code into a new <linux/dma-map-ops.h> header so that they
don't get pulled into all the drivers.  That also means the architecture
specific <asm/dma-mapping.h> is not pulled in by <linux/dma-mapping.h>
any more, which leads to a missing includes that were pulled in by the
x86 or arm versions in a few not overly portable drivers.
Signed-off-by: NChristoph Hellwig <hch@lst.de>

Lock(&iommu->lock) without disabling irq causes lockdep warnings.

[   12.703950] ========================================================
[   12.703962] WARNING: possible irq lock inversion dependency detected
[   12.703975] 5.9.0-rc6+ #659 Not tainted
[   12.703983] --------------------------------------------------------
[   12.703995] systemd-udevd/284 just changed the state of lock:
[   12.704007] ffffffffbd6ff4d8 (device_domain_lock){..-.}-{2:2}, at:
               iommu_flush_dev_iotlb.part.57+0x2e/0x90
[   12.704031] but this lock took another, SOFTIRQ-unsafe lock in the past:
[   12.704043]  (&iommu->lock){+.+.}-{2:2}
[   12.704045]

               and interrupts could create inverse lock ordering between
               them.

[   12.704073]
               other info that might help us debug this:
[   12.704085]  Possible interrupt unsafe locking scenario:

[   12.704097]        CPU0                    CPU1
[   12.704106]        ----                    ----
[   12.704115]   lock(&iommu->lock);
[   12.704123]                                local_irq_disable();
[   12.704134]                                lock(device_domain_lock);
[   12.704146]                                lock(&iommu->lock);
[   12.704158]   <Interrupt>
[   12.704164]     lock(device_domain_lock);
[   12.704174]
                *** DEADLOCK ***
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200927062428.13713-1-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

IOMMU generic layer already does sanity checks on UAPI data for version
match and argsz range based on generic information.

This patch adjusts the following data checking responsibilities:
- removes the redundant version check from VT-d driver
- removes the check for vendor specific data size
- adds check for the use of reserved/undefined flags
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/1601051567-54787-7-git-send-email-jacob.jun.pan@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

IOMMU UAPI data size is filled by the user space which must be validated
by the kernel. To ensure backward compatibility, user data can only be
extended by either re-purpose padding bytes or extend the variable sized
union at the end. No size change is allowed before the union. Therefore,
the minimum size is the offset of the union.

To use offsetof() on the union, we must make it named.
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Reviewed-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/linux-iommu/20200611145518.0c2817d6@x1.home/
Link: https://lore.kernel.org/r/1601051567-54787-4-git-send-email-jacob.jun.pan@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

This API is the equivalent of alloc_pages, except that the returned memory
is guaranteed to be DMA addressable by the passed in device.  The
implementation will also be used to provide a more sensible replacement
for DMA_ATTR_NON_CONSISTENT flag.

Additionally dma_alloc_noncoherent is switched over to use dma_alloc_pages
as its backend.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> (MIPS part)

If there are multiple NUMA domains but the RHSA is missing in ACPI/DMAR
table, we could default to the device NUMA domain as fall back.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NKevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Link: https://lore.kernel.org/r/20200904010303.2961-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20200922060843.31546-2-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

PASID is defined as a few different types in iommu including "int",
"u32", and "unsigned int". To be consistent and to match with uapi
definitions, define PASID and its variations (e.g. max PASID) as "u32".
"u32" is also shorter and a little more explicit than "unsigned int".

No PASID type change in uapi although it defines PASID as __u64 in
some places.
Suggested-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NFenghua Yu <fenghua.yu@intel.com>
Signed-off-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NTony Luck <tony.luck@intel.com>
Reviewed-by: NLu Baolu <baolu.lu@linux.intel.com>
Acked-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Acked-by: NJoerg Roedel <jroedel@suse.de>
Link: https://lkml.kernel.org/r/1600187413-163670-2-git-send-email-fenghua.yu@intel.com

The __phys_to_dma vs phys_to_dma distinction isn't exactly obvious.  Try
to improve the situation by renaming __phys_to_dma to
phys_to_dma_unencryped, and not forcing architectures that want to
override phys_to_dma to actually provide __phys_to_dma.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NRobin Murphy <robin.murphy@arm.com>

Beware that the address size for x86-32 may exceed unsigned long.

[    0.368971] UBSAN: shift-out-of-bounds in drivers/iommu/intel/iommu.c:128:14
[    0.369055] shift exponent 36 is too large for 32-bit type 'long unsigned int'

If we don't handle the wide addresses, the pages are mismapped and the
device read/writes go astray, detected as DMAR faults and leading to
device failure. The behaviour changed (from working to broken) in commit
fa954e68 ("iommu/vt-d: Delegate the dma domain to upper layer"), but
the error looks older.

Fixes: fa954e68 ("iommu/vt-d: Delegate the dma domain to upper layer")
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NLu Baolu <baolu.lu@linux.intel.com>
Cc: James Sewart <jamessewart@arista.com>
Cc: Lu Baolu <baolu.lu@linux.intel.com>
Cc: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org> # v5.3+
Link: https://lore.kernel.org/r/20200822160209.28512-1-chris@chris-wilson.co.ukSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The dev_iommu_priv_set() must be called after probe_device(). This fixes
a NULL pointer deference bug when booting a system with kernel cmdline
"intel_iommu=on,igfx_off", where the dev_iommu_priv_set() is abused.

The following stacktrace was produced:

 Command line: BOOT_IMAGE=/isolinux/bzImage console=tty1 intel_iommu=on,igfx_off
 ...
 DMAR: Host address width 39
 DMAR: DRHD base: 0x000000fed90000 flags: 0x0
 DMAR: dmar0: reg_base_addr fed90000 ver 1:0 cap 1c0000c40660462 ecap 19e2ff0505e
 DMAR: DRHD base: 0x000000fed91000 flags: 0x1
 DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
 DMAR: RMRR base: 0x0000009aa9f000 end: 0x0000009aabefff
 DMAR: RMRR base: 0x0000009d000000 end: 0x0000009f7fffff
 DMAR: No ATSR found
 BUG: kernel NULL pointer dereference, address: 0000000000000038
 #PF: supervisor write access in kernel mode
 #PF: error_code(0x0002) - not-present page
 PGD 0 P4D 0
 Oops: 0002 [#1] SMP PTI
 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.9.0-devel+ #2
 Hardware name: LENOVO 20HGS0TW00/20HGS0TW00, BIOS N1WET46S (1.25s ) 03/30/2018
 RIP: 0010:intel_iommu_init+0xed0/0x1136
 Code: fe e9 61 02 00 00 bb f4 ff ff ff e9 57 02 00 00 48 63 d1 48 c1 e2 04 48
       03 50 20 48 8b 12 48 85 d2 74 0b 48 8b 92 d0 02 00 00 48 89 7a 38 ff c1
       e9 15 f5 ff ff 48 c7 c7 60 99 ac a7 49 c7 c7 a0
 RSP: 0000:ffff96d180073dd0 EFLAGS: 00010282
 RAX: ffff8c91037a7d20 RBX: 0000000000000000 RCX: 0000000000000000
 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffffffffff
 RBP: ffff96d180073e90 R08: 0000000000000001 R09: ffff8c91039fe3c0
 R10: 0000000000000226 R11: 0000000000000226 R12: 000000000000000b
 R13: ffff8c910367c650 R14: ffffffffa8426d60 R15: 0000000000000000
 FS:  0000000000000000(0000) GS:ffff8c9107480000(0000) knlGS:0000000000000000
 CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
 CR2: 0000000000000038 CR3: 00000004b100a001 CR4: 00000000003706e0
 Call Trace:
  ? _raw_spin_unlock_irqrestore+0x1f/0x30
  ? call_rcu+0x10e/0x320
  ? trace_hardirqs_on+0x2c/0xd0
  ? rdinit_setup+0x2c/0x2c
  ? e820__memblock_setup+0x8b/0x8b
  pci_iommu_init+0x16/0x3f
  do_one_initcall+0x46/0x1e4
  kernel_init_freeable+0x169/0x1b2
  ? rest_init+0x9f/0x9f
  kernel_init+0xa/0x101
  ret_from_fork+0x22/0x30
 Modules linked in:
 CR2: 0000000000000038
 ---[ end trace 3653722a6f936f18 ]---

Fixes: 01b9d4e2 ("iommu/vt-d: Use dev_iommu_priv_get/set()")
Reported-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com>
Reported-by: NWendy Wang <wendy.wang@intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Tested-by: NTorsten Hilbrich <torsten.hilbrich@secunet.com>
Link: https://lore.kernel.org/linux-iommu/96717683-70be-7388-3d2f-61131070a96a@secunet.com/
Link: https://lore.kernel.org/r/20200903065132.16879-1-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-throughSigned-off-by: NGustavo A. R. Silva <gustavoars@kernel.org>

For SR-IOV, the PF PRI is shared between the PF and any associated VFs, and
the PRI Capability is allowed for PFs but not for VFs.  Searching for the
PRI Capability on a VF always fails, even if its associated PF supports
PRI.

Add pci_pri_supported() to check whether device or its associated PF
supports PRI.

[bhelgaas: commit log, avoid "!!"]
Fixes: b16d0cb9 ("iommu/vt-d: Always enable PASID/PRI PCI capabilities before ATS")
Link: https://lore.kernel.org/r/1595543849-19692-1-git-send-email-ashok.raj@intel.comSigned-off-by: NAshok Raj <ashok.raj@intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NLu Baolu <baolu.lu@linux.intel.com>
Acked-by: NJoerg Roedel <jroedel@suse.de>
Cc: stable@vger.kernel.org	# v4.4+

The VT-d spec requires (10.4.4 Global Command Register, TE field) that:

Hardware implementations supporting DMA draining must drain any in-flight
DMA read/write requests queued within the Root-Complex before completing
the translation enable command and reflecting the status of the command
through the TES field in the Global Status register.

Unfortunately, some integrated graphic devices fail to do so after some
kind of power state transition. As the result, the system might stuck in
iommu_disable_translation(), waiting for the completion of TE transition.

This provides a quirk list for those devices and skips TE disabling if
the qurik hits.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=208363
Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=206571Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Tested-by: NKoba Ko <koba.ko@canonical.com>
Tested-by: NJun Miao <jun.miao@windriver.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200723013437.2268-1-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

As Intel VT-d files have been moved to its own subdirectory, the prefix
makes no sense. No functional changes.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-13-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

After page requests are handled, software must respond to the device
which raised the page request with the result. This is done through
the iommu ops.page_response if the request was reported to outside of
vendor iommu driver through iommu_report_device_fault(). This adds the
VT-d implementation of page_response ops.
Co-developed-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Co-developed-by: NLiu Yi L <yi.l.liu@intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NKevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-12-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

It is refactored in two ways:

- Make it global so that it could be used in other files.

- Make bus/devfn optional so that callers could ignore these two returned
values when they only want to get the coresponding iommu pointer.
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NKevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20200724014925.15523-9-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

For guest requested IOTLB invalidation, address and mask are provided as
part of the invalidation data. VT-d HW silently ignores any address bits
below the mask. SW shall also allow such case but give warning if
address does not align with the mask. This patch relax the fault
handling from error to warning and proceed with invalidation request
with the given mask.

Fixes: 6ee1b77b ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-7-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

For guest SVA usage, in order to optimize for less VMEXIT, guest request
of IOTLB flush also includes device TLB.

On the host side, IOMMU driver performs IOTLB and implicit devTLB
invalidation. When PASID-selective granularity is requested by the guest
we need to derive the equivalent address range for devTLB instead of
using the address information in the UAPI data. The reason for that is,
unlike IOTLB flush, devTLB flush does not support PASID-selective
granularity. This is to say, we need to set the following in the PASID
based devTLB invalidation descriptor:
- entire 64 bit range in address ~(0x1 << 63)
- S bit = 1 (VT-d CH 6.5.2.6).

Without this fix, device TLB flush range is not set properly for PASID
selective granularity. This patch also merged devTLB flush code for both
implicit and explicit cases.

Fixes: 6ee1b77b ("iommu/vt-d: Add svm/sva invalidate function")
Signed-off-by: NLiu Yi L <yi.l.liu@intel.com>
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200724014925.15523-6-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Global pages support is removed from VT-d spec 3.0 for dev TLB
invalidation. This patch is to remove the bits for vSVA. Similar change
already made for the native SVA. See the link below.
Signed-off-by: NJacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NEric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/linux-iommu/20190830142919.GE11578@8bytes.org/T/
Link: https://lore.kernel.org/r/20200724014925.15523-3-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

Using uninitialized_var() is dangerous as it papers over real bugs[1]
(or can in the future), and suppresses unrelated compiler warnings
(e.g. "unused variable"). If the compiler thinks it is uninitialized,
either simply initialize the variable or make compiler changes.

In preparation for removing[2] the[3] macro[4], remove all remaining
needless uses with the following script:

git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \
	xargs perl -pi -e \
		's/\buninitialized_var\(([^\)]+)\)/\1/g;
		 s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;'

drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid
pathological white-space.

No outstanding warnings were found building allmodconfig with GCC 9.3.0
for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64,
alpha, and m68k.

[1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/
[2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/
[3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/

Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5
Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB
Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers
Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs
Signed-off-by: NKees Cook <keescook@chromium.org>

"External-facing" devices are internal devices that expose PCIe hierarchies
such as Thunderbolt outside the platform [1].  Previously these internal
devices were marked as "untrusted" the same as devices downstream from
them.

Use the ACPI or DT information to identify external-facing devices, but
only mark the devices *downstream* from them as "untrusted" [2].  The
external-facing device itself is no longer marked as untrusted.

[1] https://docs.microsoft.com/en-us/windows-hardware/drivers/pci/dsd-for-pcie-root-ports#identifying-externally-exposed-pcie-root-ports
[2] https://lore.kernel.org/linux-pci/20200610230906.GA1528594@bjorn-Precision-5520/
Link: https://lore.kernel.org/r/20200707224604.3737893-3-rajatja@google.comSigned-off-by: NRajat Jain <rajatja@google.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Remove the use of dev->archdata.iommu and use the private per-device
pointer provided by IOMMU core code instead.
Signed-off-by: NJoerg Roedel <jroedel@suse.de>
Reviewed-by: NJerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: NLu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org

The iommu_domain_identity_map() helper takes start/end PFN as arguments.
Fix a misuse case where the start and end addresses are passed.

Fixes: e70b081c ("iommu/vt-d: Remove IOVA handling code from the non-dma_ops path")
Reported-by: NAlex Williamson <alex.williamson@redhat.com>
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: NJerry Snitselaar <jsnitsel@redhat.com>
Cc: Tom Murphy <murphyt7@tcd.ie>
Link: https://lore.kernel.org/r/20200622231345.29722-7-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>

The Scalable-mode Page-walk Coherency (SMPWC) field in the VT-d extended
capability register indicates the hardware coherency behavior on paging
structures accessed through the pasid table entry. This is ignored in
current code and using ECAP.C instead which is only valid in legacy mode.
Fix this so that paging structure updates could be manually flushed from
the cache line if hardware page walking is not snooped.

Fixes: 765b6a98 ("iommu/vt-d: Enumerate the scalable mode capability")
Signed-off-by: NLu Baolu <baolu.lu@linux.intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: Kevin Tian <kevin.tian@intel.com>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Link: https://lore.kernel.org/r/20200622231345.29722-6-baolu.lu@linux.intel.comSigned-off-by: NJoerg Roedel <jroedel@suse.de>