GMBUS has several ports and each has it's own corresponding
I2C adpater. When multiple I2C adapters call gmbus_xfer() at
the same time there is a race condition in using the underlying
GMBUS controller. Fixing this by adding a mutex lock when calling
gmbus_xfer().

v2: Moved gmbus_mutex below intel_gmbus and added comments.
Rebased to drm-intel-next-queued.
Signed-off-by: NYufeng Shen <miletus@chromium.org>
[danvet: Shortened the gmbus_mutex comment a bit and add the patch
revision comment to the commit message.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

When HDMI-DVI converter is used, it's not only necessary to turn off
audio, but also to disable HDMI_MODE_SELECT and video infoframe. Since
the DVI mode is mainly tied to audio functionality from end user POV,
add a new "force-dvi" audio mode:

	xrandr --output HDMI1 --set audio force-dvi

Note that most users won't need to set this and happily rely on the EDID
based DVI auto detection.
Reported-by: NAndrea Arcangeli <aarcange@redhat.com>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Currently we reserve seqnos only when we emit the request to the ring
(by bumping dev_priv->next_seqno), but start using it much earlier for
ring->oustanding_lazy_request. When 2 threads compete for the gpu and
run on two different rings (e.g. ddx on blitter vs. compositor)
hilarity ensued, especially when we get constantly interrupted while
reserving buffers.

Breakage seems to have been introduced in

commit 6f392d54
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Sat Aug 7 11:01:22 2010 +0100

    drm/i915: Use a common seqno for all rings.

This patch fixes up the seqno reservation logic by moving it into
i915_gem_next_request_seqno. The ring->add_request functions now
superflously still return the new seqno through a pointer, that will
be refactored in the next patch.

Note that with this change we now unconditionally allocate a seqno,
even when ->add_request might fail because the rings are full and the
gpu died. But this does not open up a new can of worms because we can
already leave behind an outstanding_request_seqno if e.g. the caller
gets interrupted with a signal while stalling for the gpu in the
eviciton paths. And with the bugfix we only ever have one seqno
allocated per ring (and only that ring), so there are no ordering
issues with multiple outstanding seqnos on the same ring.

v2: Keep i915_gem_get_seqno (but move it to i915_gem.c) to make it
clear that we only have one seqno counter for all rings. Suggested by
Chris Wilson.

v3: As suggested by Chris Wilson use i915_gem_next_request_seqno
instead of ring->oustanding_lazy_request to make the follow-up
refactoring more clearly correct. Also improve the commit message
with issues discussed on irc.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=45181
Tested-by: Nicolas Kalkhof nkalkhof()at()web.de
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

If we don't have a sufficient number of free entries in the FIFO, we
proceed to do a write anyway. With this check we should have a clue if
that write actually failed or not.

After some discussion with Daniel Vetter regarding his original
complaint, we agreed upon this.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We want to unconditionally enable ppgtt for two reasons:
- Windows uses this on snb and later.
- We need the basic hw support to work before we can think about real
  per-process address spaces and other cool features we want.

But Chris Wilson was complaining all over irc and intel-gfx that this
will blow up if we don't have a module option to disable it. Hence add
one, to prevent this.

ppgtt support seems to slightly change the timings and make crashy
things slightly more or less crashy. Now in my testing and the testing
this got on troublesome snb machines, it seems to have improved things
only. But on ivb it makes quite a few crashes happen much more often,
see

https://bugs.freedesktop.org/show_bug.cgi?id=41353

Luckily Eugeni Dodonov seems to have a set of workarounds that fix
this issue.

v2: Don't try to enable ppgtt on pre-snb.

v3: Pimp commit message and make Chris Wilson less grumpy by adding a
module option.

v4: New try at making Chris Wilson happy.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This adds support to bind/unbind objects and wires it up. Objects are
only put into the ppgtt when necessary, i.e. at execbuf time.

Objects are still unconditionally put into the global gtt.

v2: Kill the quick hack and explicitly pass cache_level to ppgtt_bind
like for the global gtt function. Noticed by Chris Wilson.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This just adds the setup and teardown code for the ppgtt PDE and the
last-level pagetables, which are fixed for the entire lifetime, at
least for the moment.

v2: Kill the stray debug printk noted by and improve the pte
definitions as suggested by Chris Wilson.

v3: Clean up the aperture stealing code as noted by Ben Widawsky.

v4: Paint the init code in a more pleasing colour as suggest by Chris
Wilson.

v5: Explain the magic numbers noticed by Ben Widawsky.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Tested-by: NChris Wilson <chris@chris-wilson.co.uk>
Tested-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Chris Wilson and me have again stared at funny error states and it's
been pretty clear from the start that something was seriously amiss.
The seqnos last seen by the cpu were a few hundred behind those that
the gpu could have possibly emitted last before it died ...

Chris now tracked it down (hopefully, definit verdict's still out),
but in hindsight we'd have found the bug by simply dumping the cpu
side tracking of the ring head and tail registers.

Fix this and prevent an identical time-waster in the future.

Because the hangs always involved semaphores in one way or another,
we've tried to dump the mbox registers, but couldn't find any
inconsistencies. Still, dump them too.
Reviewed-and-wanted-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

We have to do this manually. Somebody had a Great Idea.

I've measured speed-ups just a few percent above the noise level
(below 5% for the best case), but no slowdows. Chris Wilson measured
quite a bit more (10-20% above the usual snb variance) on a more
recent and better tuned version of sna, but also recorded a few
slow-downs on benchmarks know for uglier amounts of snb-induced
variance.

v2: Incorporate Ben Widawsky's preliminary review comments and
elaborate a bit about the performance impact in the changelog.

v3: Add a comment as to why we don't need to check the 3rd memory
channel.

v4: Fixup whitespace.
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

This was pretty handy when figuring out what exactly went wrong with
ppgtt and it might also be useful when we stop filling the entire gart
with scratch page entries.

Also add the gen6+ DONE reg while at it.

v2: Chris Wilson suggested to allocate the error_state with kzalloc
for better paranoia. Also kill existing spurious clears of the
error_state while at it.
Reviewed-by: NBen Widawsky <ben@bwidawsk.net>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

In order to correctly account for reserving space in the GTT and fences
for a batch buffer, we need to independently track whether the fence is
pinned due to a fenced GPU access in the batch or whether the buffer is
pinned in the aperture. Currently we count the fenced as pinned if the
buffer has already been seen in the execbuffer. This leads to a false
accounting of available fence registers, causing frequent mass evictions.
Worse, if coupled with the change to make i915_gem_object_get_fence()
report EDADLK upon fence starvation, the batchbuffer can fail with only
one fence required...

Fixes intel-gpu-tools/tests/gem_fenced_exec_thrash

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38735Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: NPaul Neumann <paul104x@yahoo.de>
[danvet: Resolve the functional conflict with Jesse Barnes sprite
patches, acked by Chris Wilson on irc.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Based on a patch by Ben Widawsky, but with different colors
for the bikeshed.

In contrast to Ben's patch this one doesn't add the fault regs.
Afaics they're for the optional page fault support which
- we're not enabling
- and which seems to be unsupported by the hw team. Recent bspec
  lacks tons of information about this that the public docs released
  half a year back still contain.

Also dump ring HEAD/TAIL registers - I've recently seen a few
error_state where just guessing these is not good enough.

v2: Also dump INSTPM for every ring.

v3: Fix a few really silly goof-ups spotted by Chris Wilson.
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The code already got unwieldy and we want to dump more per-ring
registers.

Only functional change is that we now also capture the video
ring registers on ilk.

v2: fixup a refactor fumble spotted by Chris Wilson.
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Sometimes it may be the case when we idle the gpu or wait on something
we don't actually want to process the retiring list. This patch allows
callers to choose the behavior.
Reviewed-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The problem this patch solves is that the forcewake accounting
necessary for register reads is protected by dev->struct_mutex. But the
hangcheck and error_capture code need to access registers without
grabbing this mutex because we hold it while waiting for the gpu.
So a new lock is required. Because currently the error_state capture
is called from the error irq handler and the hangcheck code runs from
a timer, it needs to be an irqsafe spinlock (note that the registers
used by the irq handler (neglecting the error handling part) only uses
registers that don't need the forcewake dance).

We could tune this down to a normal spinlock when we rework the
error_state capture and hangcheck code to run from a workqueue.  But
we don't have any read in a fastpath that needs forcewake, so I've
decided to not care much about overhead.

This prevents tests/gem_hangcheck_forcewake from i-g-t from killing my
snb on recent kernels - something must have slightly changed the
timings. On previous kernels it only trigger a WARN about the broken
locking.

v2: Drop the previous patch for the register writes.

v3: Improve the commit message per Chris Wilson's suggestions.
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

LLC is not SNB/IVB-specific, so we should check for it in a more generic
way.
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Some decent history digging indicates that this was to be used for the
GLX_MESA_allocate_memory extension but never actually implemented for
any released i915 userspace code.

So just rip it out.

v2: Fixup the Makefile.
Acked-by: NDave Airlie <airlied@gmail.com>
Cc: Keith Whitwell <keithw@vmware.com>
Reviewed-by: NEric Anholt <eric@anholt.net>
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

The video sprites support various video surface formats natively and can
handle scaling as well.  So add support for them using the new DRM core
sprite support functions.

v2: use drm specific fourcc header and defines
v3: address Daniel's comments:
  - don't take struct mutex around register access (only needed for
    regs in the GT power well)
  - don't hold struct mutex across vblank waits
  - fix up update_plane API (pass obj instead of GTT offset)
  - add interlaced defines for sprite regs
  - drop unnecessary 'reg' variables
  - comment double buffered reg flushing
  Also fix w/h confusion when writing the scaling reg.
v4: more fixes, address more comments from Daniel, and include Hai's fix
  - prevent divide by zero in scaling calculation (Hai Lan)
  - update to Ville's new DRM_FORMAT_* types
  - fix sprite watermark handling (calc based on CRTC size, separate
    from normal display wm)
  - remove private refcounts now that the fb cleanups handles things
v5: add linear surface support
v6: remove color key clearing & setting from update_plane

For this version, I tested DPMS since it came up in the last review;
DPMS off/on works ok when a video player is working under X, but for
power saving we'll probably want to do something smarter.  I'll leave
that for a separate patch on top.  Likewise with the refcounting/fb
layer handling, which are really separate cleanups.
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

We learned that the ECOBUS register was inside the GT power well, and
so *did* need force wake to be read, so it gets removed from the list
of 'doesn't need force wake' registers.

That means the code reading ECOBUS after forcing the mt_force_wake
function to be called needs to use I915_READ_NOTRACE; it doesn't need
to do more force wake fun as it's already done it manually.

This also adds a comment explaining why the MT forcewake testing code
only needs to call mt_forcewake_get/put and not disable RC6 manually
-- the ECOBUS read will return 0 if the device is in RC6 and isn't
using MT forcewake, causing the test to work correctly.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>

Otherwise hangcheck spuriously fires when running blitter/bsd-only
workloads.

Contrary to a similar patch by Ben Widawsky this does not check
INSTDONE of the other rings. Chris Wilson implied that in a failure to
detect a hang, most likely because INSTDONE was fluctuating. Thus only
check ACTHD, which as far as I know is rather reliable. Also, blitter
and bsd rings can't launch complex tasks from a single instruction
(like 3D_PRIM on the render with complex or even infinite shaders).

This fixes spurious gpu hang detection when running
tests/gem_hangcheck_forcewake on snb/ivb.
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NKeith Packard <keithp@keithp.com>

This adds a default setting for semaphores parameter, and enables
semaphores by default on IVB.

For now, as semaphores interaction with VTd causes random issues on
SNB, we do not enable them by default. But they can still be enabled
via the semaphores=1 kernel parameter.

v2: enables semaphores on SNB when IO remapping is disabled, with base
on Keith Packard patch.

CC: Daniel Vetter <daniel.vetter@ffwll.ch>
CC: Ben Widawsky <ben@bwidawsk.net>
CC: Keith Packard <keithp@keithp.com>
CC: Jesse Barnes <jbarnes@virtuousgeek.org>
CC: Chris Wilson <chris@chris-wilson.co.uk>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42696
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=40564
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41353
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38862Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

RC6 should always work on IVB, and should work on SNB whenever IO
remapping is disabled. RC6 never works on Ironlake. Make the default
value for the parameter follow these guidelines. Setting the value
to either 0 or 1 will force the specified behavior.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NKenneth Graunke <kenneth@whitecape.org>
Reviewed-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=38567
Cc: Ted Phelps <phelps@gnusto.com>
Cc: Peter <pab1612@gmail.com>
Cc: Lukas Hejtmanek <xhejtman@fi.muni.cz>
Cc: Andrew Lutomirski <luto@mit.edu>

This prevents an in-kernel division by zero which happens when we are
asking for i915_chipset_val too quickly, or within a race condition
between the power monitoring thread and userspace accesses via debugfs.

The issue can be reproduced easily via the following command:
while ``; do cat /sys/kernel/debug/dri/0/i915_emon_status; done

This is particularly dangerous because it can be triggered by
a non-privileged user by just reading the debugfs entry.

This issue was also found independently by Konstantin Belousov
<kostikbel@gmail.com>, who proposed a similar patch.
Reported-by: NKonstantin Belousov <kostikbel@gmail.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Acked-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

On IVB C0+ with newer BIOSes, the forcewake handshake has changed.  There's
now a bitfield for different driver components to keep the GT powered
on.  On Linux, we centralize forcewake handling in one place, so we
still just need a single bit, but we need to use the new registers if MT
forcewake is enabled.

This needs testing on affected machines.  Please reply with your
tested-by if you had problems after a BIOS upgrade and this patch fixes
them.

v2: force MT mode. shift by 16
v3: set MT force wake bits then check ECOBUS

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=42923Tested-by: NManoj Iyer <manoj.iyer@canonical.com>
Tested-by: NRobert Hooker <robert.hooker@canonical.com>
Tested-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Testing i915_panel_use_ssc for the default value was broken, so the
driver would never autodetect the correct value.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NMichel Alexandre Salim <salimma@fedoraproject.org>
Tested-by: NMichel Alexandre Salim <salimma@fedoraproject.org>
Cc: stable@kernel.org

In preparation of to support 32 fences on Ivybdrigde.
Signed-Off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NKeith Packard <keithp@keithp.com>

With the tracing code in there they are far too big to inline.

.text savings compared to a non force inline kernel:

i915_restore_display                        4393   12036   +7643
i915_save_display                           4295   11459   +7164
i915_handle_error                           2979    6666   +3687
i915_driver_irq_handler                     2923    5086   +2163
i915_ringbuffer_info                         458    1661   +1203
i915_save_vga                                  -    1200   +1200
i915_driver_irq_uninstall                    453    1624   +1171
i915_driver_irq_postinstall                  913    2078   +1165
ironlake_enable_drps                         719    1872   +1153
i915_restore_vga                               -    1142   +1142
intel_display_capture_error_state            784    2030   +1246
intel_init_emon                              719    2016   +1297

and more ...

[AK: these are older numbers, with the new SNB forcewake checks
it will be even worse]
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Well almost anyway.  IVB has 3 planes, pipes, transcoders, and FDI
interfaces, but only 2 pipe PLLs.  So two of the pipes must use the same
pipe timings (e.g. 2 DP plus one other, or two HDMI with the same mode
and one other, etc.).
Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org>
Tested-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Reviewed-By: NEugeni Dodonov <eugeni.dodonov@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

I have no evidence for this byte being used this way, and lots of
counterexamples.  Restore the struct to its empirical definition and
patch up gmbus setup to match.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Acked-by: NChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NKeith Packard <keithp@keithp.com>

This value doesn't come directly from the VBT, and so is rather
specific to the particular DP output.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Store the panel power sequencing delays in the dp private structure,
rather than the global device structure. Who knows, maybe we'll get
more than one eDP device in the future.

From the eDP spec, we need the following numbers:

 T1 + T3	Power on to Aux Channel operation (panel_power_up_delay)

		This marks how long it takes the panel to boot up and
		get ready to receive aux channel communications.

 T8		Video signal to backlight on (backlight_on_delay)

		Once a valid video signal is being sent to the device,
		it can take a while before the panel is actuall
		showing useful data. This delay allows the panel
		to get something reasonable up before the backlight
		is turned on.

 T9		Backlight off to video off (backlight_off_delay)

		Turning the backlight off can take a moment, so
		this delay makes sure there is still valid video
		data on the screen.

 T10		Video off to power off (panel_power_down_delay)

		Presumably this delay allows the panel to perform
		an orderly shutdown of the display.

 T11 + T12	Power off to power on (panel_power_cycle_delay)

		So, once you turn the panel off, you have to wait a
		while before you can turn it back on. This delay is
		usually the longest in the entire sequence.

Neither the VBIOS source code nor the hardware documentation has a
clear mapping between the delay values they provide and those required
by the eDP spec. The VBIOS code actually uses two different labels for
the delay values in the five words of the relevant VBT table.

**** MORE LATER ***

Look at both the current hardware register settings and the VBT
specified panel power sequencing timings. Use the maximum of the two
delays, to make sure things work reliably. If there is no VBT data,
then those values will be initialized to zero, so we'll just use the
values as programmed in the hardware. Note that the BIOS just fetches
delays from the VBT table to place in the hardware registers, so we
should get the same values from both places, except for rounding.

VBT doesn't provide any values for T1 or T2, so we'll always just use
the hardware value for that.

The panel power up delay is thus T1 + T2 + T3, which should be
sufficient in all cases.

The panel power down delay is T1 + T2 + T12, using T1+T2 as a proxy
for T11, which isn't available anywhere.

For the backlight delays, the eDP spec says T6 + T8 is the delay from the
end of link training to backlight on and T9 is the delay from
backlight off until video off. The hardware provides a 'backlight on'
delay, which I'm taking to be T6 + T8 while the VBT provides something
called 'T7', which I'm assuming is s

On the macbook air I'm testing with, this yields a power-up delay of
over 200ms and a power-down delay of over 600ms. It all works now, but
we're frobbing these power controls several times during mode setting,
making the whole process take an awfully long time.
Signed-off-by: NKeith Packard <keithp@keithp.com>

The reference clock configuration must be done before any mode setting
can occur as all outputs must be disabled to change
anything. Initialize the clocks after turning everything off during
the initialization process.

Also, re-initialize the refclk at resume time.
Signed-off-by: NKeith Packard <keithp@keithp.com>

This tells the driver whether a CK505 clock source is available on
pre-PCH hardware. If so, it should be used as the non-SSC source,
leaving the internal clock for use as the SSC source.
Signed-off-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NChris Wison <chris@chris-wilson.co.uk>

Add ELD support for Intel Eaglelake, IbexPeak/Ironlake,
SandyBridge/CougarPoint and IvyBridge/PantherPoint chips.

ELD (EDID-Like Data) describes to the HDMI/DP audio driver the audio
capabilities of the plugged monitor. It's built and passed to audio
driver in 2 steps:

(1) at get_modes time, parse EDID and save ELD to drm_connector.eld[]

(2) at mode_set time, write drm_connector.eld[] to the Transcoder's hw
    ELD buffer and set the ELD_valid bit to inform HDMI/DP audio driver

This patch is tested OK on G45/HDMI, IbexPeak/HDMI and IvyBridge/HDMI+DP.
Test scheme: plug in the HDMI/DP monitor, and run

        cat /proc/asound/card0/eld*

to check if the monitor name, HDMI/DP type, etc. show up correctly.

Minor imperfection: the GEN5_AUD_CNTL_ST/DIP_Port_Select field always
reads 0 (reserved). Without knowing the port number, I worked it around
by setting the ELD_valid bit for ALL the three ports. It's tested to not
be a problem, because the audio driver will find invalid ELD data and
hence rightfully abort, even when it sees the ELD_valid indicator.

Thanks to Zhenyu and Pierre-Louis for a lot of valuable help and testing.

CC: Zhao Yakui <yakui.zhao@intel.com>
CC: Wang Zhenyu <zhenyu.z.wang@intel.com>
CC: Jeremy Bush <contractfrombelow@gmail.com>
CC: Christopher White <c.white@pulseforce.com>
CC: Pierre-Louis Bossart <pierre-louis.bossart@intel.com>
CC: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Various issues involved with the space character were generating
warnings in the checkpatch.pl file. This patch removes most of those
warnings.
Signed-off-by: NAkshay Joshi <me@akshayjoshi.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Not all systems expose a firmware or platform mechanism for changing the backlight intensity on i915, so add native driver support.
Signed-off-by: NMatthew Garrett <mjg@redhat.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: David Airlie <airlied@linux.ie>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Len Brown <lenb@kernel.org>
Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: NSedat Dilek <sedat.dilek@googlemail.com>
Tested-by: NMichel Alexandre Salim <salimma@fedoraproject.org>
Tested-by: NKamal Mostafa <kamal@canonical.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NKeith Packard <keithp@keithp.com>

At least on a Lenovo X220 the HPD bits of this are enabled at boot but
cleared after resume, which means plug interrupts stop working.

This also happens to fix DP displays re-lighting on resume.  I'm quite
certain that's an accident: the first DP link train inevitably fails on
that machine, and it's only serendipity that we're getting multiple plug
interrupts and the second train works.  But I shall take my victories
where I get them.
Signed-off-by: NAdam Jackson <ajax@redhat.com>
Tested-by: NKeith Packard <keithp@keithp.com>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Signed-off-by: NKeith Packard <keithp@keithp.com>

Align unfenced buffers on older hardware to the power-of-two object
size.  The docs suggest that it should be possible to align only to a
power-of-two tile height, but using the already computed fence size is
easier and always correct. We also have to make sure that we unbind
misaligned buffers upon tiling changes.

In order to prevent a repetition of this bug, we change the interface
to the alignment computation routines to force the caller to provide
the requested alignment and size of the GTT binding rather than assume
the current values on the object.
Reported-and-tested-by: NSitosfe Wheeler <sitsofe@yahoo.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36326Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: stable@kernel.org
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NKeith Packard <keithp@keithp.com>

We've tried several times to make this machine 'just work', but every
patch that does causes many other machines to fail. This adds a quirk
which special cases this hardware and forces ssc to be
disabled. There's no way to override this from the command line; that
would be a significantly more invasive change.

This patch fixes #36656 on fdo bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=36656Signed-off-by: NKeith Packard <keithp@keithp.com>
References: https://bugs.freedesktop.org/show_bug.cgi?id=36656Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NBen Widawsky <ben@bwidawsk.net>
Signed-off-by: NKeith Packard <keithp@keithp.com>