In a low-memory 2D VM, fbdev can take up a large percentage of
available memory, making them unavailable for other DRM clients.

Since we do not take fbdev into account when filtering modes,
we end up claiming to support more modes than we actually do.

As a result, users get a black screen when setting a mode too
large for current available memory.  In a low-memory VM
configuration, users can get a black screen for a mode as low
as 1024x768.

The current mode filtering mechanism keys off of
SVGA_REG_SUGGESTED_GBOBJECT_MEM_SIZE_KB, i.e. the maximum amount
of surface memory we have.  Since this value is a performance
suggestion, not a hard limit, and since there should not be much
of a performance impact for a 2D VM, rather than filtering out
more modes, we will just allow ourselves to exceed the SVGA's
performance suggestion.

Also changed assumed bpp to 32 from 16 to make sure we can
actually support all the modes listed.
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Cc: <stable@vger.kernel.org>

Some global KMS state that is elsewhere protected by the mode_config
mutex here needs to be protected with a local mutex. Remove corresponding
lockdep checks and introduce a new driver-private global_kms_state_mutex,
and make sure its locking order is *after* the crtc locks in order to
avoid having to release those when the new mutex is taken.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Cc: <stable@vger.kernel.org> # 4.6

Not used any more.
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Base the cursor position on the coordinate of the crtc origin in the
gui coordinate system rather than in the framebuffer coordinate system.

With explicit placement, these may differ (for example when two crtcs
scan out of the same framebuffer location).
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Introduced by qxl, add these properties as a generic way to tell a
display manager about the GUI layout.

Also add the hotplug_mode_update_property which advises display managers to
reread the mode list on a hotplug event.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

Preparation for supporting explicit fbs for screen objects and screen
targets.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

For page flips the framebuffer may be much larger than the crtc
scanout area and may be attached to multiple crtcs.
When flipping a crtc, make sure we dirty only that crtc's area of the
framebuffer.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

When the framebuffer is a vmwgfx dma buffer and a proxy surface is
created, the vmw_kms_update_proxy() function requires that the proxy
surface width and the framebuffer pitch are compatible, otherwise
display corruption occurs as seen in gnome-shell/native with software
3D. Since the framebuffer pitch is determined by user-space, allocate
a proxy surface the width of which is based on the framebuffer pitch
rather than on the framebuffer width.

Cc: <stable@vger.kernel.org>
Reported-by: NRaphael Hertzog <buxy@kali.org>
Tested-by: NMati Aharoni <muts@kali.org>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Moves a bunch of junk to .rodata from .data.

 drivers/gpu/drm/vmwgfx/vmwgfx.ko:
-.text                       132244
+.text                       132240
-.rodata                      18296
+.rodata                      18680
-.data                         5096
+.data                         4712
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBoris Brezillon <boris.brezillon@free-electrons.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-28-git-send-email-boris.brezillon@free-electrons.comSigned-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Now that the mode type bit merge logic is fixed to only merge
between new probed modes, hopefully we can eliminat the special
case for qxl and virtio. That is make the merge the mode type
bits from all matching new probed modes, just like every other
driver.

qxl and virtio got excluded from the merging in
commit 3fbd6439 ("drm: copy mode type in drm_mode_connector_list_update()")
commit abce1ec9 ("Revert "drm: copy mode type in drm_mode_connector_list_update()"")
commit b87577b7 ("drm: try harder to avoid regression when merging mode bits")

Cc: Marc-André Lureau <marcandre.lureau@redhat.com>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Adam Jackson <ajax@redhat.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
[danvet: Resolve conflicts with doc updates.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

These hooks will be gone soon.

Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1449218769-16577-12-git-send-email-daniel.vetter@ffwll.chReviewed-by: NThierry Reding <treding@nvidia.com>

Fixes native drm clients like Fedora 23 Wayland which now appears to
be able to use cursor hotspots without strange cursor offsets.
Also fixes a couple of ignored error paths.

Since the core drm cursor hotspot is incompatible with the legacy vmwgfx
hotspot (the core drm hotspot is reset when the drm_mode_cursor ioctl
is used), we need to keep track of both and add them when the device
hotspot is set. We assume that either is always zero.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Drivers shouldn't clobber the passed in addfb ioctl parameters.
i915 was doing just that. To prevent it from happening again,
pass the struct around as const, starting all the way from
internal_framebuffer_create().
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

With the introduction of the new command buffer mechanism,
proper care wasn't taken to flush cursor image updates and
event-less screen-target page-flips.

Fix this by introducing explicit flush points.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Now that we use memremap instead of ioremap, Use WRITE_ONCE / READ_ONCE
instead of iowrite / ioread.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

This continues the pattern started in commit cc1ef118 ("drm/irq:
Make pipe unsigned and name consistent"). This is applied to the public
APIs and driver callbacks, so pretty much all drivers need to be updated
to match the new prototypes.

Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Jianwei Wang <jianwei.wang.chn@gmail.com>
Cc: Alison Wang <alison.wang@freescale.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Function vmw_kms_helper_dirty() uses the uninitialized variable ret as
return value. Make the result deterministic and directly return as the
variable is unused anyway. Detected by Coverity CID 1324255.
Signed-off-by: NChristian Engelmayer <cengelma@gmx.at>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

Updating and fixing copyright headers.
Bump version minor to signal vgpu10 support.
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NBrian Paul <brianp@vmware.com>

Initial DX support.
Co-authored with Sinclair Yeh, Charmaine Lee and Jakob Bornecrantz.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NCharmaine Lee <charmainel@vmware.com>

This patch fixes two issues.  One, when a surface is a proxy for a DMA
buffer, it holds an extra reference that needs to be cleared.

Two, when fbdev is enabled, we need to unpin the framebuffer before
unloading the driver.  This is done by a call to vmw_fb_off().

v2
Moved unreferencing surface to from vmw_framebuffer_surface_destroy()
to vmw_kms_new_framebuffer()

Added "struct vmw_framebuffer *vfb = NULL;" to silence a compiler
warning.

Removed error checking after calling vmw_surface/dmabuf_reference()
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>

For a Screen Target capable display device, the display topology is
limited by SVGA_REG_MAX_PRIMARY_BOUNDING_BOX_MEM.  Two values are
checked against this limit:
  1.  Size of the bounding box enclosing all the displays, and
  2.  Size of the total number of displays, e.g. framebuffers

The limitations above mean we do not have exact max width and
height for the topology.  The best current option is to set those to
the maximum texture width/height.
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

We're giving up all attempts to keep cpu- and device byte ordering separate.

This silences sparse when compiled using
make C=2 CF="-D__CHECK_ENDIAN__"
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>

The preferred mode typically didn't end up first, since the function
drm_mode_connector_list_update() reordered the modes.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

It somehow got lost in a rewrite.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

With screen targets the old legacy display system fbdev doesn't work
satisfactory anymore. At best the resolution is severely restricted.
Therefore implement fbdev on top of the kms system. With this change, fbdev
will be using whatever KMS backend is chosen.

There are helpers available for this, so in the future we'd probably want
to implement the helper callbacks instead of calling into our KMS
implementation directly.

v2: Make sure we take the mode_config mutex around modesetting,
Also clear the initial framebuffer using vzalloc instead of vmalloc.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

The kernel interface is needed for fbdev, and needs to be free from
a file_priv member. To accomplish this, remove the fb surface mutex
and list which isn't used anymore, anyway.

Finally, make the pin() and unpin() pin the framebuffer for all display
system backends, so that fbdev can pin its framebuffer before mapping it.

v2: Address review comments:
- Fix vmw_framebuffer_unpin() to handle also the surface framebuffer case.
- Fix vmw_kms_new_framebuffer() to actually use the only_2d parameter.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

Also implements the missing readback function and
fixes page flip in case of no event.

v2:
- Adapt to the work done for screen targets for 2d, in particular
Handle proxy surface updates.
- Remove execbuf quirks since we now use fifo reserve / commit.
- Revert the initial placement of vmw dma buffers.

v3: Address review comments.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

This makes it possible to use the same function for surface dirty and
present. Also fixes page flip without events.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

We need to make the dirty- and readback functions callable without a struct
drm_file pointer. We also need to unify the handling of dirty- and readback
cliprects that are now implemented in various places across the kms system,
som add helpers to facilitate this.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

v2: Fix dma buffer validation on resource pinning.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

This patch address the following underlying issues with SurfaceDMA

* SurfaceDMA command does not work in a 2D VM, but we can wrap a
  proxy surface around the same DMA buffer and use the SurfaceCopy
  command which does work in a 2D VM.

* Wrapping a DMA buffer with a proxy surface also gives us an
  added optimization path for the case when the DMA buf
  dimensions match the mode.  In this case, the DMA buf can
  be pinned as the display surface, saving an extra copy.
  This only works in a 2D VM because we won't be doing any
  rendering operations directly to the display surface.

v2
* Moved is_dmabuf_proxy field to vmw_framebuffer_surface
* Undone coding style changes
* Addressed other issues from review
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>

Add support for the screen target device interface.
Add a getparam parameter and bump minor to signal availability.
Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>

For certain surface copies, we don't have a user space handle for
the destination surface.  In such cases, we are going to trust that
our caller is giving us the right surface ID.

To do this case, we created a quirk flag that may be useful
in the future for handling other cases.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: NSinclair Yeh <syeh@vmware.com>

Signed-off-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>

Add command buffer support.
Currently we don't implement preemption or fancy error handling.
Tested with a couple of mesa-demos, compiz/unity and viewperf maya-03.

v2:
- Synchronize with pending work at command buffer manager takedown.
- Add an interface to flush the current command buffer for latency-critical
  command batches and apply it to framebuffer dirtying.

v3:
- Minor fixes of definitions and typos to address reviews.
- Removed new or moved branch predictor hints.
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NSinclair Yeh <syeh@vmware.com>

This is required to properly handle failing dpms calls.
When making a wait in i915 interruptible, I've noticed
that the dpms sequence could fail with -ERESTARTSYS because
it was waiting interruptibly for flips. So from now on
allow drivers to fail in their connector dpms callback.

Encoder and crtc dpms callbacks are unaffected.

Changes since v1:
- Update kerneldoc for the drm helper functions.
Signed-off-by: NMaarten Lankhorst <maarten.lankhorst@linux.intel.com>
[danvet: Resolve conflicts due to different merge order.]
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Experimental lockdep annotation added to the TTM lock has unveiled a
couple of lock dependency violations in the vmwgfx driver. In both
cases it turns out that the device_private::reservation_sem is not
needed so the offending code is moved out of that lock.

Cc: <stable@vger.kernel.org>
Acked-by: NSinclair Yeh <syeh@vmware.com>
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>

Fixes a case where we call vmw_fifo_idle() from within a wait function with
task state !TASK_RUNNING, which is illegal.

In addition, make the locking fine-grained, so that it is performed once
for every read- and write operation. This is of course more costly, but we
don't perform much register access in the timing critical paths anyway. Instead
we have the extra benefit of being sure that we don't forget the hw lock around
register accesses. I think currently the kms code was quite buggy w r t this.

This fixes Red Hat Bugzilla Bug 1180796

Cc: stable@vger.kernel.org
Signed-off-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NJakob Bornecrantz <jakob@vmware.com>

Turned out to be much simpler on top of my latest atomic stuff than
what I've feared. Some details:

- Drop the modeset_lock_all snakeoil in drm_plane_init. Same
  justification as for the equivalent change in drm_crtc_init done in

	commit d0fa1af4
	Author: Daniel Vetter <daniel.vetter@ffwll.ch>
	Date:   Mon Sep 8 09:02:49 2014 +0200

	    drm: Drop modeset locking from crtc init function

  Without these the drm_modeset_lock_init would fall over the exact
  same way.

- Since the atomic core code wraps the locking switching it to
  per-plane locks was a one-line change.

- For the legacy ioctls add a plane argument to the locking helper so
  that we can grab the right plane lock (cursor or primary). Since the
  universal cursor plane might not be there, or someone really crazy
  might forgoe the primary plane even accept NULL.

- Add some locking WARN_ON to the atomic helpers for good paranoid
  measure and to check that it all works out.

Tested on my exynos atomic hackfest with full lockdep checks and ww
backoff injection.

v2: I've forgotten about the load-detect code in i915.

v3: Thierry reported that in latest 3.18-rc vmwgfx doesn't compile any
more due to

commit 21e88620
Author: Rob Clark <robdclark@gmail.com>
Date:   Thu Oct 30 13:39:04 2014 -0400

    drm/vmwgfx: fix lock breakage

Rebased and fix this up.

Cc: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>