Adding the variable ${PWD} that equals `pwd` makes the config files
much simpler.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

On some tests that do multiple boots (patchcheck, bisect, etc), the build
of the next kernel to run may finish before the stable kernel has finished
booting. Then the install of the new kernel will fail when it tries to connect
as the machine has not finished the boot process.

Do one more monitor flush to make sure the machine is up and running before
trying to connect to it again.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When setting the next kernel to boot to with grub, do not opencode
the reboot operation.  The normal reboot operation can be modified by
config options (namely POWERCYCLE_AFTER_REBOOT). This needs to affect
all reboots. Remove the opencoded reboot to make sure that any changes
to the reboot code also affect all reboots.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The IF statements for DEFAULTS and TEST_START sections now handle
complex statements (&&,||)

Example:

  TEST_START IF (DEFINED ALL_TESTS || ${MYTEST} == boottest) && ${MACHINE} == gandalf
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The order for some of the keywords on a section line
(TEST_START or DEFAULTS) does not really matter. Simply need
to remove the keyword from the line as we process it and
evaluate the next keyword in the line. By removing the keywords
as we find them, we do not need to keep track of where on the
line they were found.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The make_min_config test will turn off one config at a time and check
if the config boots or not, and if it does, it will remove that config
plus any config that depended on that config.

ktest already looks if a config has a dependency and will try the
dependency config first. But by sorting the configs and trying the
config with the most configs dependent on it, we can shrink the
minconfig faster.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Have IF statements process if a config variable or option has been
defined or not. Can use NOT DEFINED in the case for telling if
a variable or option has not been defined.

DEFAULTS IF NOT DEFINED SSH_USER
SSH_USER = root
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The OVERRIDE keyword will allow options defined in the given
DEFAULTS section to override options defined in previous DEFAULT
sections.

Normally, options will error if they were previous defined.
The OVERRIDE keyword allows options that have been previously
defined to be changed in the given section.

Note, the same option can not be defined in the same DEFAULT section
even if that section is marked as OVERRIDE.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The code that handles parsing the TEST_TYPE and DEFAULT code share
a lot of common functionality. Combine the two and add a if statement
that does what is different between them.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Have the reading of the config file allow reading of other config
files using the INCLUDE keyword. This allows multiple config files
to share config options.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Allow ==, !=, <=, >=, <, and > to be used in IF statements
to compare if a section should be processed or not.

For example:

BITS := 32

DEFAULTS IF ${BITS} == 32
MIN_CONFIG = ${CONFIG_DIR}/config-32
ELSE
MIN_CONFIG = ${CONFIG_DIR}/config-64
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Add IF keyword to sections within the config. Also added an ELSE
keyword that allows different config options to be set for a given
section.

For example:

TYPE := 1
STATUS := 0

DEFAULTS IF ${TYPE}
[...]
ELSE IF ${STATUS}
[...]
ELSE
[...]

The above will process the first section as $TYPE is true. If it
was false, it would process the last section as $STATUS is false.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Even if REBOOT_ON_ERROR is set, it becomes annoying that the target
machine is rebooted when a config option is incorrect or a build
fails. There's no reason to reboot the target for host only issues.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When ktest.pl reboots, it will usuall wait SLEEP_TIME seconds of idle
console before starting the next test. By setting the
REBOOT_SUCCESS_LINE, ktest will not wait SLEEP_TIME when it detects the
line while rebooting to a new kernel.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There's cases where running the same kernel over and over again
is useful, and being able to not install the same kernel can
save time between tests.

Add a NO_INSTALL option that tells ktest.pl to not install the
new kernel.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently if the grub menu that is supplied is not found, it will
just boot into the last grub menu in menu.lst. Fail instead of
confusing the user why their kernel is not booting.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Several places that call reboot do the same thing with respect to the
monitor. By adding this code into the reboot code, redundant code is
removed and it paves the way for the the reset time patch.
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Link: http://lkml.kernel.org/r/1313155932-20092-4-git-send-email-drjones@redhat.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>

Only save the .config file if we're doing mrproper
Signed-off-by: NAndrew Jones <drjones@redhat.com>
Link: http://lkml.kernel.org/r/1313155932-20092-3-git-send-email-drjones@redhat.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>

Signed-off-by: NAndrew Jones <drjones@redhat.com>
Link: http://lkml.kernel.org/r/1313155932-20092-2-git-send-email-drjones@redhat.comSigned-off-by: NSteven Rostedt <rostedt@goodmis.org>

In testing one of my boxes, I found that I only wanted to build and
install the kernel. I wanted to manually reboot the box and test it.
Adding a TEST_TYPE option "install" allows this to happen.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The MIN_CONFIG is a single config that is considered to have all the
configs that are required to boot the box.

ADD_CONFIG is a list of configs that we add that may contain configs
known to be broken (set off) or just configs that we want every box to
have and this can include shared configs.

If a config has no MIN_CONFIG defined, but has multiple files defined
for the ADD_CONFIG, the test will die, because the MIN_CONFIG will
default to ADD_CONFIG. The problem is the code to open MIN_CONFIG
expects a string of one file, not multiple, and the open will fail.

Since the real minconfig that is used is a concatination of MIN_CONFIG
and ADD_CONFIG files, we change the code to open that instead of
whatever MIN_CONFIG defaults to.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The IGNORE_CONFIG file holds the configs that we don't want to change
(with their proper settings). But on start up, the make noconfig is
executed, and the configs that are on are also put into the ignore
config category. But these are configs that were forced on by the
kconfig scripts and not something that we found must be enabled to boot
our machine. By keeping the configs that are forced on by default,
separate from the configs we found that are required to boot the box, we
can get a much more interesting IGNORE_CONFIG. In fact, the
IGNORE_CONFIG can usually end up being the must have configs to boot,
and only have 6 or 7 configs set.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

If the defined OUTPUT_MIN_CONFIG in the make_min_config test exists,
then give a prompt to ask the user if they want to use that config
instead, as it is very often the case, especially when the test has been
interrupted. The OUTPUT_MIN_CONFIG is usually the config that one wants
to use to continue the test where they left off.

But if START_MIN_CONFIG is defined (thus the MIN_CONFIG is not the
default), then do not prompt, as it will be annoying if the user has
this as one of many tests, and the test pauses waiting for input, while
the user is sleeping.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

To save time, the test does not just grab any option and test
it. The Kconfig files are examined to determine the dependencies
of the configs. If a config is chosen that depends on another
config, that config will be checked first. By checking the
parents first, we can eliminate whole groups of configs that
may have been enabled.

For example, if a USB device config is chosen and depends on
CONFIG_USB, the CONFIG_USB will be tested before the device.
If CONFIG_USB is found not to be needed, it, as well as all
configs that depend on it, will be disabled and removed from
the current min_config.

Note, the code from streamline_config (make localmodconfig)
was copied and used to find the dependencies in the Kconfig file.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After doing a make localyesconfig, your kernel configuration may
not be the most useful minimum configuration. Having a true minimum
config that you can use against other configs is very useful if
someone else has a config that breaks on your code. By only forcing
those configurations that are truly required to boot your machine
will give you less of a chance that one of your set configurations
will make the bug go away. This will give you a better chance to
be able to reproduce the reported bug matching the broken config.

Note, this does take some time, and may require you to run the
test over night, or perhaps over the weekend. But it also allows
you to interrupt it, and gives you the current minimum config
that was found till that time.

Note, this test automatically assumes a BUILD_TYPE of oldconfig
and its test type acts like boot.

TODO: add a test version that makes the config do more than just
      boot, like having network access.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There has been too many times that I put in one too many SKIP
TEST_STARTs and start the test with the default randconfig by accident
that I added this to have ktest ask the user for which test they want to
run if no TEST_START is specified.

Now if I accidently start the test with all TEST_STARTs skipped, ktest
asks what test do I want to run, and I now have a chance to kill it
before it does a make mrproper on my build directory.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Several places had the following code:

    get_grub_index;
    get_version;
    install;

    start_monitor;
    return monitor;

Creating a function "start_monitor_and_boot()" replaces these mulitple
uses with a single call.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Doing a patchcheck test, there may be warnings that gcc produces which
may be OK, and the test should not fail on that commit. By adding a
IGNORE_WARNINGS option to list a space delimited SHA1s that are ignored
lets the user avoid having the test fail on certain commits.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The tar command to create the module directory is cjf, but the
extraction only had xf. This works on most versions of tar, but some
versions of tar require xjf for extraction as well.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

As multiple tests may be executed by the same server, have the test
machine name add uniqueness to the value of the temp directory.
Otherwise the temp directories may overwrite each other's tests.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

There are some cases that a patch may be needed to apply to the kernel
in patchcheck or bisect tests. Adding a PRE_BUILD option to apply the
patch and POST_BUILD to remove it, allows for this to be done easily.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a config is set with CONFIG_MODULES=n, it does not mean that the
kernel does not need an initrd to boot. For systems that depend on LVM
and such, an initrd must run first.

If POST_INSTALL is defined, then run the post install regardless if
modules are needed or not.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

The LOG_FILE variable needs to evaluate the $ options as well.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

After a bug is found, the STOP_AFTER_FAILURE timeout is used to
determine how much output should be printed before breaking out
of the monitor loop. This is to get things like call traces and
enough infromation about the bug to help determine what caused it.

The STOP_AFTER_FAILURE is usually much shorter than the TIMEOUT
that is used to determine when to quit after no more stdio is given.

But since the stdio read uses a wait on I/O, the STOP_AFTER_FAILURE is
only checked after we get something from I/O. But if the I/O does
not return any more data, we wait the TIMEOUT period instead, even
though we already triggered a bug report.

The wait on I/O should honor the STOP_AFTER_FAILURE time if a bug has
been found.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Using the build KCONFIG_ALLCONFIG environment variable to force
the min config may not always work properly. Since ktest is
written in perl, it is trivial to read and replace the current
config with the configs specified by the min config.

Now the min config (and add configs) are read by perl and before
a make is done, these configs in the .config file are replaced
by the version in the min config.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Searching through several tests, it gets confusing which test result
is for which test. By adding the TEST_NAME option, the user can tell
which test result belongs to which test.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Currently the config_bisect compares the min config with the
CONFIG_BISECT config. There may be another config that we know
is good that we want to ignore configs on. By passing in this
config it will ignore the options that are set in the good config.

Note: This only ignores the config, it does not (yet) handle
options that are different between the two configs. If the good
config has "SLAB" set and the bad config has "SLUB" it will not
find the bug if the bug had to do with changing these two options.

This is something that I intend to implement in the future.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

When a triple fault happens in a test, no call trace nor panic
is displayed. Instead, the system reboots to the good kernel.
Since the good kernel may display a boot prompt that matches the
success string, ktest may think that the test succeeded, when it
did not.

Detecting triple faults is tricky because it is hard to generalize
what a reboot looks like. The best that we can come up with for now
is to examine the Linux banner. If we detect that the Linux banner
matches the test we want to test, then look to see if we hit another
Linux banner with a different kernel is booted. This can be assumed
to be a triple fault.

We can't just check for two Linux banners because things like
early printk may cause the Linux banner to be displayed twice. Checking
for different kernel versions should be the safe bet.

If this for some reason detects a false triple boot. A new ktest
config option is also created:

 DETECT_TRIPLE_FAULT

This can be set to 0 to disable this checking.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Different timeouts can cause the ktest monitor to break out of the
loop. It becomes annoying that one does not know the reason why
it exited the monitor loop. Display the cause of the reason why
the loop was exited.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

By ignoring the unset values of the minconfig in deciding
what to test in the config_bisect can cause the problem
config from being tested too.

Just do not test the configs that are set in the minconfig.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>