Hi,
Below patch includes fixes for few purely software bugs identified
since last release.
1. Keep track and display(as part of ethtool command output) the no.
   of single-bit and double-bit ECC errors.
2. Handle race condition between intr handler and "interface down"
   routine.
3. Initial link state setting modified so that the link state displayed
   after "interface Up" is correct.
4. Fix for "Incorrect Tx packet count when TSO is enabled".
5. Disable periodic DMA of statistics and schedule one-shot DMA
   only when required.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
Below patch addresses few h/w specific issues.
1. Check for additional ownership bit on Rx path before
   starting Rx processing.
2. Enable only 4 PCCs(Per Context Controller) for Xframe I
   revisions less than 4.
3. Program Rx and Tx round robin registers depending on
   no. of rings/FIFOs.
4. Tx continous interrupts is now a loadable parameter.
5. Reset the card if we get double-bit ECC errors.
6. A soft reset of XGXS being done to force a link state change has been
   eliminated.
7. After a reset, clear "parity error detected" bit,
   PCI-X ECC status register, and PCI_STATUS bit in
   tx_pic_int register.
8. The error in the disabling allmulticast implementation has been
   rectified.
9. Leave the PCI-X parameters MMRBC, OST etc. at their
   BIOS/system defaults.
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Hi,
We are submitting a series of 13 patches to support our Xframe I and
Xframe II line of products. The patches can be categorized as follows:

Patches 1-8 : Changes applicable to both Xframe I and II
Patches 9-11: Xframe II specific features
Patch 12: Addresses issues found during testing cycle.
Patch 13: Incorpoates mostly the review comments from community
	and some last moment bug fixes.

Please review the patches and let us know your comments.

Starting with patch 1 below.
This patch involves cosmetic changes(tabs and indentation,
regrouping of transmit and receive data structures, typecasting,
code cleanup).
Signed-off-by: NRavinandan Arakali <ravinandan.arakali@neterion.com>
Signed-off-by: NRaghavendra Koushik <raghavendra.koushik@neterion.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Even though the changes are minor for the next release an increasing
version number simplifies my support issues.
Signed-off-by: NPierre Ossman <drzeus@drzeus.cx>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Need to use list_for_entry_safe(), as we're removing items during the
traversal.  list_for_each_entry() uses the first ptr also as an iterator, if
you kfree() it slab takes it, might poison it and then you try to use it to
iterate to the next object in list.

Cc: Vojtech Pavlik <vojtech@suse.cz>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the p-persistence CSMA algorithm which in simplex mode was starting
with a slottime delay before doing anything else as if there was carrier
collision resulting in bad performance on simplex links.
Signed-off-by: NRalf Baechle DL5RB <ralf@linux-mips.org>
Acked-by: NJeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Yet another hack due to the fact that libata is the only user of SCSI's
->eh_strategy_handler() hook.

 sata_sx4 directly references sg->length to calculate total_len in
pdc20621_dma_prep().  This is incorrect as dma_map_sg() could have
merged multiple sg's into one and, in such case, sg->length doesn't
reflect true size of the entry.  This patch makes it use
sg_dma_len(sg).
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Patch from Nicolas Pitre
Signed-off-by: NNicolas Pitre <nico@cam.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

1. Move hwif_to_node to ide.h

2. Use hwif_to_node in ide-disk.c
Signed-off-by: NChristoph Lameter <clameter@sgi.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch removes the tda9887 stuff from lgdt330x.c.  It's experimental code
which wasn't supposed to leak out and we don't want it in 2.6.13.
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Acked-by: NMauro Carvalho Chehab <mchehab@brturbo.com.br>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Two trivial text changes in Kconfig and lgdt330x.c
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Added pci_request_regions() before using the controller to avoid duplicate
usage of the I2O controller when the dpt_i2o driver and I2O subsystem is
loaded at the same time.
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Cc: James Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix thinko in Christoph's changes.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver already depends on CONFIG_PCI in Kconfig.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

envctrl currently uses very odd ways to stop a thread, using various
things that should be exposed to drivers at all.

This patch (which is untested as I don't have sparc hardware) switches
it to use the proper kthread infrastructure.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove new configuration API from i2o_config

The API-patch is still available from the I2O website (which is mentioned in
the kernel config now).  It is removed because it creates a new binary
sysfs-attribute, which doesn't have the limitiation of 4k.  Expect for the
Adaptec controllers, which has a limitation in the hardware this attribute
doesn't make sense anywhere else.  Until the sysfs API provides an attribute
which doesn't buffer (like firmware) and let access to at least 64k blocks i
provide a separate patch...

(akpm: basically, this API was introduced post-2.6.12 and Markus wants to pull
it out before 2.6.13).
Signed-off-by: NMarkus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fixed problems so we can build with gcc-4.0.1
Signed-off-by: NPeter Schaefer-Hutter <peter.schaefer-hutter@tfk-racoms.com>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* Makes dpram allocations work
* Makes non-console UART work on both 8xx and 82xx
* Fixed whitespace in files that were touched
Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: NPantelis Antoniou <panto@intracom.gr>
Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Compile fix for the BCM1250 I2C driver.

Cc: Greg KH <greg@kroah.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

i8xx_tco.c v0.08: only "arm" the watchdog when the watchdog has been
started.  (Kernel Bug 4251: system reset when battery is read and i8xx_tco
driver loaded)
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Originally From: Andrew Morton <akpm@osdl.org>

Altered By: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>

There is an additional 'build fix' patch that Andrew Morton submitted on
the kernel list (I have changed out his dpr_i2o with dpt_i2o below
though).
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

Revert commit fec59a71, which is
breaking sparc64 that doesn't have a working pci_update_resource.

We'll re-do this after 2.6.13 when we'll do it all properly.

Fix a null dereference in module unload path.

Found by a simple modprobe icn ; rmmod icn
Signed-off-by: NDave Jones <davej@redhat.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

We have some nasty issues with 2.6.12-rc6. Any request to scan on
the lpfc or qla2xxx FC adapters will oops. What is happening is the
system is defaulting to non-transport registered targets, which
inherit the parent of the scan. On this second scan, performed by
the attribute, the parent becomes the shost instead of the rport.
The slave functions in the 2 FC adapters use starget_to_rport()
routines, which incorrectly map the shost as an rport pointer.

Additionally, this pointed out other weaknesses:
- If the target structure is torn down outside of the transport,
  we have no method for it to be regenerated at the proper parent.
- We have race conditions on the target being allocated by both
  the midlayer scan (parent=shost) and by the fc transport
  (parent=rport).
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

- Structural changes within lgdt330x driver, framework now supports
  both chips... tested OK on lgdt3302 and lgdt3303.
- Add LG/TUA6034 dvb_pll_desc for ATSC with LG TDVS-H062F & DViCO FusionHDTV5.
- Fixed LGDT330X signal strength: For now, always set it to 0.
- Corrected LGDT330X boundary condition error in read_snr: dB calculation.
Signed-off-by: NMac Michaels <wmichaels1@earthlink.net>
Signed-off-by: NMichael Krufky <mkrufky@m1k.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Martin Schwidesky <schwidefsky@de.ibm.com>

Convert qeth to the new klist interface and make it compiling again.
Signed-off-by: NFrank Pavlic <pavlic@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Like many other southbridges from different manufacturers, VIA VT8235
chip has two non-standard BARs for power management and SMBus registers
(see the datasheet at http://www.via.com.tw).

This new quirk routine fixes boot problem with 2.6.13-rc2/rc6 kernels on
Targa Visionary 811 Athlon64 laptop, as reported by Mikael Pettersson
<mikpe@csd.uu.se>.
Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Reported by:Vincent Fortier (Bugzilla Bug 4768)

"At boot time the screen appears moved to the mid right portion of the actual
video pannel making the end of the line appears at the left edge...  It simply
looks like moved half way to the right"

His particular hardware has a display with an unusual dimension (1920x1200) but
unfortunately has no EDID block. None of the entries in the global mode
database is correct for this particular display, and it particularly has
difficulty scaling up 640x480 (the default startup mode of nvidiafb) to
1920x1200 which causes the above described problem.

1, Add 1920x1200 to the global mode database.

2. Let nvidiafb base the startup mode from the flatpanel dimensions only if the
  EDID block is absent, no boot mode parameter is specified by the user, and
  a flatpanel/LCD display is attached.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: "Salyzyn, Mark" <mark_salyzyn@adaptec.com>

Prevent driver from loading if another driver (i2o) has already claimed
the resources associated with the card. Discussion associated with this
bug can be referenced at http://bugzilla.kernel.org/show_bug.cgi?id=4940
where it was agreed to use pci_request_regions in both the dpt_i2o and
the i2o driver to prevent both drivers loading on the same adapter(s).
Signed-off-by: NMark Salyzyn <aacraid@adaptec.com>

Rejections fixed up and
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>

For 64-bit BAR[i] only pci_dev->resource[i] is valid, ->resource[i+1]
slot is unused and contains zeroes in all fields.

So when we update a PCI BAR, all we need is just to check that we're
going to update a _valid_ resource.

Also make sure to write high bits - use "x >> 16 >> 16" (rather than the
simpler ">> 32") to avoid warnings on 32-bit architectures where we're
not going to have any high bits.
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Doesn't make the local irq disabling around it less buggy, but at
least we replace the offender with the right kind of primitive.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

This function produces a warning when CPU_FREQ=n.  Since it's a very
simple calculation, make it inline instead of adding preprocessor
directives around it.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Else on SMP systems it is possible for hotplug to execute,
invoke tg3_open(), and end up loading the uninitialized
PCI register save area into the card.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch removes the unused bt_dump() function and it also removes
its BT_DMP macro. It also unexports the hci_dev_get(), hci_send_cmd()
and hci_si_event() functions.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

There's no need to check for NULL before calling kfree() on a pointer.
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

The Kensington Bluetooth USB adapter is based on a Broadcom chip
with the HID proxy support. To initialize these kind of devices
correctly it is necessary to send HCI_Reset as the first command.
Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>

My patch in commit fa72b903 incorrectly
removed blk_queue_tag->real_max_depth.

The original resize implementation was incorrect in the following
points.

 * actual allocation size of tag_index was shorter than real_max_size,
   but assumed to be of the same size, possibly causing memory access
   beyond the allocated area.
 * bits in tag_map between max_deptn and real_max_depth were
   initialized to 1's, making the tags permanently reserved.

In an attempt to fix above two bugs, I had removed allocation optimization
in init_tag_map and real_max_size.  Tag map/index were allocated and freed
immediately during resize.

Unfortunately, I wasn't considering that tag map/index can be resized
dynamically with tags beyond new_depth active.  This led to accessing
freed area after shrinking tags and led to the following bug reporting
thread on linux-scsi.

   http://marc.theaimsgroup.com/?l=linux-scsi&m=112319898111885&w=2

To fix the problem, I've revived real_max_depth without allocation
optimization in init_tag_map, and Andrew Vasquez confirmed that the
problem was fixed.  As Jens is not going to be available for a week, he
asked me to make sure that this patch reaches you.

   http://marc.theaimsgroup.com/?l=linux-scsi&m=112325778530886&w=2

Also, a comment was added to make sure that real_max_size is needed for
dynamic shrinking.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch includes support for the new Infineon Trusted Platform Module
SLB 9635 TT 1.2 and does further include ACPI-support for both chip
versions (SLD 9630 TT 1.1 and SLB9635 TT 1.2).  Since the ioports and
configuration registers are not correctly set on some machines, the
configuration is now done via PNPACPI, which reads out the correct values
out of the DSDT-table.  Note that you have to have CONFIG_PNP,
CONFIG_ACPI_BUS and CONFIG_PNPACPI enabled to run this driver (assuming
that mainboards including a TPM do have the need for ACPI anyway).
Signed-off-by: NMarcel Selhorst <selhorst@crypto.rub.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>