The length information should be stored in the struct ib_mr object,
otherwise the length value of a valid mr object would always be 0.

Link: https://lore.kernel.org/r/1588931159-56875-7-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

For ilog2(x), if x is 0 and not a constant variable, it will return
-1. And there will be an error as below:

 hns3 0000:7d:00.0 hns_0: Local work queue 0x8 catast error, sub_event type is: 2

So modify to_hr_hem_entries_shift() to return 0 if conut is 0.

Fixes: 54d66387 ("RDMA/hns: Optimize WQE buffer size calculating process")
Link: https://lore.kernel.org/r/1588931159-56875-6-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

srq's attribute max_wr should be 1 less than the total count of wqe.

Fixes: ffb1308b ("RDMA/hns: Move SRQ code to the reasonable place")
Link: https://lore.kernel.org/r/1588931159-56875-5-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When allocating eq buffer, the size of base address page should be defined
by eqe_ba_pg_sz instead of srqwqe_ba_pg_sz.

Fixes: 477a0a38 ("RDMA/hns: Optimize 0 hop addressing for EQE buffer")
Link: https://lore.kernel.org/r/1588931159-56875-4-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The firmware has reduced the number of descriptions of command
HNS_ROCE_OPC_QUERY_PF_TIMER_RES to 1. The driver needs to adapt, otherwise
the hardware will report error 4(CMD_NEXT_ERR).

Fixes: 0e40dc2f ("RDMA/hns: Add timer allocation support for hip08")
Link: https://lore.kernel.org/r/1588931159-56875-3-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The qkey queried through the query ud qp verb is a fixed value and it
should be read from qp context.

Fixes: 926a01dc ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/1588931159-56875-2-git-send-email-liweihang@huawei.comSigned-off-by: NLijun Ou <oulijun@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Current description doesn't include new devices, change it by updating to
have more generic description and remove DRIVER_NAME and DRIVER_VERSION
defines.

Link: https://lore.kernel.org/r/20200513095304.210240-1-leon@kernel.orgSigned-off-by: NShay Drory <shayd@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The output buffer used in mlx5_cmd_exec_inout() was wrongly changed from
pre-allocated srq_out pointer to an input "out" point. That leads to
unpredictable results in the get_srqc() call later.

Fixes: 31578def ("RDMA/mlx5: Update mlx5_ib to use new cmd interface")
Link: https://lore.kernel.org/r/20200513100809.246315-1-leon@kernel.orgReported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When drop action is used the matching packet will stop processing in
steering and will be dropped. This functionality will allow users to drop
matching packets.

Link: https://lore.kernel.org/r/20200504054227.271486-1-leon@kernel.orgSigned-off-by: NDaria Velikovsky <daria@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

User can configure default miss rule in order to skip matching in the user
domain and forward the packet to the kernel steering domain.  When user
requests a default miss rule, we add steering rule to forward the traffic
to the next namespace.

Link: https://lore.kernel.org/r/20200504053012.270689-5-leon@kernel.orgSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move part of the code that get the destinations into function so the code
will be more readable.  In addition change the variables definition to be
in reversed christmas tree.

Link: https://lore.kernel.org/r/20200504053012.270689-4-leon@kernel.orgSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The fs_core already supports creation of rules with multiple
actions/destinations. Refactor fs_core to handle the case
when don't trap rule is created with destination. Adapt the
calling code in the driver.
Signed-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

It's easier to understand and maintain enable flags of qp using a single
field in type of unsigned long than defining a field for every flags in
the structure hns_roce_qp, and we can add new flags for features more
conveniently in the future.

Link: https://lore.kernel.org/r/1588674607-25337-4-git-send-email-liweihang@huawei.comSigned-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

12 bits is not enough for HIP08_C, so extend a new field in length of 16
bits for it.

Link: https://lore.kernel.org/r/1588674607-25337-3-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The variable rcqe_sz is being unnecessarily assigned twice, fix this by
removing one of the duplicates.

Fixes: 8bde2c50 ("RDMA/mlx5: Update all DRIVER QP places to use QP subtype")
Link: https://lore.kernel.org/r/20200507151610.52636-1-colin.king@canonical.com
Addresses-Coverity: ("Evaluation order violation")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When operating in switchdev mode or using devlink to disable RoCE
only raw Ethernet QPs are allowed to be created.

When in switchdev mode this can lead to passing an invalid port number
as part of the modify qp firmware cmd and will lead to a syndrome
reported back to the user, such as:

 * mlx5_cmd_check:803:(pid 50148): RST2INIT_QP(0x502) op_mod(0x0) failed,
   status bad parameter(0x3), syndrome (0x177405).

Internal UD QP might be used to test for write combining support (even if
externally we report RoCE as disabled) check for that specific flag and
allow is specifically.

Fixes: b5ca15ad ("IB/mlx5: Add proper representors support")
Link: https://lore.kernel.org/r/20200506071602.7177-3-leon@kernel.orgSigned-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Assign the profile to the IB device before executing stages. This will
allow to check which profile is being used from within a stage.

Link: https://lore.kernel.org/r/20200506071602.7177-2-leon@kernel.orgSigned-off-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Split qp.c by removing all WR logic to separate file.

Link: https://lore.kernel.org/r/20200506065513.4668-4-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add small helpers in order to avoid code duplication and improve code
readability. Decrease the amount of code in the gigantic post_send
function and divide it to readable methods that will help in code
maintenance in the future.

Link: https://lore.kernel.org/r/20200506065513.4668-3-leon@kernel.orgSigned-off-by: NMax Gurtovoy <maxg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Reuse newly introduced mlx5_cmd_exec_in() and mlx5_cmd_exec_inout() to
reduce code duplication in mlx5_ib module.

Link: https://lore.kernel.org/r/20200506065513.4668-2-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

These caps are assigned in query_pf_caps() or set_default_caps(), and
should not be assigned out of these two functions.

Link: https://lore.kernel.org/r/1588242691-12913-4-git-send-email-liweihang@huawei.comSigned-off-by: NWenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

lp_pktn_ini means the number of loopback slice packets for long messages,
it should depend on MTU(fixed to 4096B currently) and max size of SQ
inline.

Link: https://lore.kernel.org/r/1588242691-12913-3-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is a comments with some chinese semicolons that cause encoding
issues each time hns_roc_hw_v2.h was modified from a IDE. So fix this by
using correct symbols.

Link: https://lore.kernel.org/r/1588242691-12913-2-git-send-email-liweihang@huawei.comSigned-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Optimize the SRQ's WQE buffer parameters calculating process to make the
codes more readable by using new functions about multi-hop addressing to
calculating capabilities of SRQ.

Link: https://lore.kernel.org/r/1588071823-40200-6-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Just move the SRQ related code to more reasonable place, and unify format
of some prints.

Link: https://lore.kernel.org/r/1588071823-40200-5-git-send-email-liweihang@huawei.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Optimize the QP's WQE buffer parameters calculating process to make the
codes more readable mainly by merging calculation of extended sge space of
kernel and userspace. In addition, add some inline functions to simply
codes about multi-hop addressing.

Link: https://lore.kernel.org/r/1588071823-40200-4-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The MTT (Memory Translate Table) interface is no longer used to configure
the buffer address to BT (Base Address Table) that requires driver
mapping.  Because the MTT is not compatible with multi-hop addressing of
the hip08, it is replaced by MTR (Memory Translate Region) interface, and
all the MTT functions should be removed.

Link: https://lore.kernel.org/r/1588071823-40200-3-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

PBL table has its own implementation for multi-hop addressing currently,
but for the hardware, all table's addressing use the same logic, there is
no need to implement repeatedly. So optimize the PBL buffer allocation
process by using the mtr's interfaces.

Link: https://lore.kernel.org/r/1588071823-40200-2-git-send-email-liweihang@huawei.comSigned-off-by: NXi Wang <wangxi11@huawei.com>
Signed-off-by: NLang Cheng <chenglang@huawei.com>
Signed-off-by: NWeihang Li <liweihang@huawei.com>
Reported-by: Nkbuild test robot <lkp@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Calculate UDP source port based on the grh.flow_label. If grh.flow_label
is not valid, we will use minimal supported UDP source port.

Link: https://lore.kernel.org/r/20200504051935.269708-6-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Calculate and set UDP source port based on the flow label. If flow label
is not defined in GRH then calculate it based on lqpn/rqpn.

Link: https://lore.kernel.org/r/20200504051935.269708-4-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a new stat that counts admin commands failures, which might help when
debugging different issues.

Link: https://lore.kernel.org/r/20200420062213.44577-4-galpress@amazon.comReviewed-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add a new stat that counts mmap failures, which might help when debugging
different issues.

Link: https://lore.kernel.org/r/20200420062213.44577-3-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Create CQ errors are already being counted, report them along all other
counters.

Link: https://lore.kernel.org/r/20200420062213.44577-2-galpress@amazon.comReviewed-by: NFiras JahJah <firasj@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The patch sets the lag tx affinity of the data QPs and the GSI QPs
according to the LAG xmit slave.

For GSI QPs, in case the link layer is Ethenet (RoCE) we create two GSI
QPs, one for each physical port. When the driver selects the GSI QP, it
will consider the port affinity result.  For connected QPs, the driver
sets the affinity of the xmit slave.

The above, ensures that RC QP and it's corresponding GSI QP will transmit
from the same physical port.

Link: https://lore.kernel.org/r/20200430192146.12863-17-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move affinity related code in modify qp to function.  It's a preparation
for next patch the extend the affinity calculation to consider the xmit
slave.

Link: https://lore.kernel.org/r/20200430192146.12863-16-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Following patch adds additional argument to the create AH function, so it
make sense to group ah_attr and flags arguments in struct.

Link: https://lore.kernel.org/r/20200430192146.12863-13-maorg@mellanox.comSigned-off-by: NMaor Gottlieb <maorg@mellanox.com>
Acked-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Acked-by: NGal Pressman <galpress@amazon.com>
Acked-by: NWeihang Li <liweihang@huawei.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

RAW packet QP and underlay QP must be created with either
RQ or SQ, check that.

Fixes: e126ba97 ("mlx5: Add driver for Mellanox Connect-IB adapters")
Link: https://lore.kernel.org/r/20200427154636.381474-37-leon@kernel.orgSigned-off-by: NAharon Landau <aharonl@mellanox.com>
Reviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Finish separation to blocks of mlx5_ib_create_qp() functions,
so all internal create QP implementation are located in one place.

Link: https://lore.kernel.org/r/20200427154636.381474-36-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

After major refactoring in create QP flow, it is no needed to call
to destroy QP in XRC_TGT flow.

Link: https://lore.kernel.org/r/20200427154636.381474-35-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Update all the places in create QP flows to copy response
to the user in one place.

Link: https://lore.kernel.org/r/20200427154636.381474-34-leon@kernel.orgReviewed-by: NMaor Gottlieb <maorg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>