On module load, creates a debugfs parent 'rssd' in debugfs root. Then for each
device, create a new node with corresponding disk name. Under the new node, two
entries 'registers' and 'flags' are created.

NOTE: These entries were removed from sysfs in the previous patch
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This patch removes entries 'registers' and 'flags' from sysfs. Updated ABI file
to reflect this change.
Reported-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* Formatted the output of 'registers' entry
* Added "Commands in Q' to output of 'registers' entry
* Added a new entry 'flags'
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

When checking for command completions if the register value is zero, proceed
to next register.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix to support more than one sector in exec_drive_command().
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

'cmd_issue_lock' is for only acquiring a free slot, and it is not used
in interrupt context. So replaced irq version with non-irq version of spinlock.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Set the following block queue boundary variables
	* max_hw_sectors
	* max_segment_size
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>

Removed setting of q->nr_requests.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

If a PIO (IOCTL/internal) command resulted in TFE, signal the wait event or break out of polling.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

For the ioctl command HDIO_GET_IDENTITY, return the stored copy of IDENTIFY
DATA instead of sending the command to the device - similar to libata.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This change sets custom timeouts depending on PIO command.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Fix clearing an incorrect register in mtip_init_port
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Release the semaphore in an error path in mtip_hw_get_scatterlist(). This
fixes the smatch warning inconsistent returns.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Dump tagmap on failure, instead of individual tags.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* If a ncq  command time out and a non-ncq command is active, skip restart port
* Queue(pause) ncq commands during operations spanning more than one non-ncq commands - secure erase, download microcode
* When a non-ncq command is active, allow incoming non-ncq commands to wait instead of failing back
* Changed timeout for download microcode and smart commands
* If the device in write protect mode, fail all writes (do not send to device)
* Set maximum retries to 2
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Shortened macros used to represent mtip_port->flags and dd->dd_flag
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* Handle the interrupt completion of polled internal commands
* Do not check remove pending flag for standby command
* On rebuild failure,
    - set corresponding bit dd_flag
    - do not send standby command
* Free ida index in remove path
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* Add support for detecting the following device status
        - write protect
        - over temp (thermal shutdown)
* Add new sysfs entry 'status', possible values - online, write_protect, thermal_shutdown
* Add new file 'sysfs-block-rssd' to document ABI (Reported-by: Greg Kroah-Hartman)
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Moved setting completion time into mtip_issue_ncq_command()
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* Merged the following flags into one variable 'dd_flag':
        * drv_cleanup_done
        * resumeflag
* Added the following flags into 'dd_flag'
        * remove pending
        * init done
* Removed 'ftlrebuildflag' (similar flag is already part of mti_port->flags)
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Ensure that block device is properly unregistered, if
pci_register_driver() fails.
Signed-off-by: NRyosuke Saito <raitosyo@gmail.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

mtip32xx: fix incorrect value set for drv_cleanup_done, and re-initialize and start port in mtip_restart_port()

This patch includes two changes:
	* fix incorrect value set for drv_cleanup_done
	* re-initialize and start port in mtip_restart_port()
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

mtip32xx: removed the irrelevant argument of mtip_hw_submit_io() and the unused member of struct driver_data

Removed the following:
	* irrelevant argument 'barrier' of mtip_hw_submit_io()
	* unused member 'eh_active' of struct driver_data
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Earlier, rebuild monitoring was done in the context of probe. Now the service
thread takes the responsibility of rebuild monitoring, and probe returns good
status.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We recently introduce new continue in the loop which make gcc complain.
In theory if MTIP_FLAG_SVC_THD_ACTIVE_BIT is set, we could hit continue
over and over until eventually we time out of the loop.  In that case
"active" should be set as true, but right now it's uninitialized.
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

* queue ncq commands when a non-ncq is in progress or error handling is active
* merge variables 'internal_cmd_in_progress' and 'eh_active' into new variable 'flags'
* get rid of read/write semaphore 'internal_sem'
* new service thread to issue queued commands
* use macros from ata.h for command codes
* return ENOTTY for BLKFLSBUF ioctl
* style changes
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NJens Axboe <axboe@kernel.dk>

Signed-off-by: NJens Axboe <axboe@kernel.dk>

Missed two items: mtip_major, and mtip_pci_driver.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Kill the declarations in the header file and mark them as static.
Reshuffle a few functions to ensure that everything is properly
declared before being used.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

Do the conversion/copy up front instead of passing in a compat flag
to the ioctl handler and subsequently to the exec_drive_taskfile()
function.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

We need to clean up the compat ioctl handling, but this makes it
work for now at least.
Signed-off-by: NJens Axboe <axboe@kernel.dk>

This adds mtip32xx, a driver supporting Microns line of
pci-express flash storage cards.
Signed-off-by: NAsai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: NSam Bradshaw <sbradshaw@micron.com>
Signed-off-by: NJens Axboe <jaxboe@fusionio.com>