This prerequisite patch provides some minor edits (alignments, renames) and a
minor modification inside a function to facilitate the next patch by using
existing nla_* functions.
Signed-off-by: NJustin Iurman <justin.iurman@uliege.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch anticipates the support for the IOAM insertion inside in-transit
packets, by making a difference between input and output in order to determine
the right value for its hop-limit (inherited from the IPv6 hop-limit).

Input case: happens before ip6_forward, the IPv6 hop-limit is not decremented
yet -> decrement the IOAM hop-limit to reflect the new hop inside the trace.

Output case: happens after ip6_forward, the IPv6 hop-limit has already been
decremented -> keep the same value for the IOAM hop-limit.
Signed-off-by: NJustin Iurman <justin.iurman@uliege.be>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch caches doorbell address directly in struct mlx4_en_tx_ring.

This removes the need to bring in cpu caches whole struct mlx4_uar
in fast path.

Note that mlx4_uar is not guaranteed to be on a local node,
because mlx4_bf_alloc() uses a single free list (priv->bf_list)
regardless of its node parameter.

This kind of change does matter in presence of light/moderate traffic.
In high stress, this read-only line would be kept hot in caches.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: NTariq Toukan <tariqt@nvidia.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeremy Kerr says:

====================
MCTP kunit tests

This change adds some initial kunit tests for the MCTP core. We'll
expand the coverage in a future series, and augment with a few
selftests, but this establishes a baseline set of tests for now.

Thanks to the kunit folks for the framework!

---

v2:
 - fix MCTP=m, KUNIT={y,m} breakage
 - fix mctp test netdev initialisation
 - strict route reference count checking
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add multi-packet route input tests, for message reassembly. These will
feed packets to be received by a bound socket, or dropped.
Signed-off-by: NJeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a few tests for single-packet route inputs, testing the
mctp_route_input function.
Signed-off-by: NJeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a few tests for the initial packet ingress through
mctp_pkttype_receive function; mainly packet header sanity checks. Full
input routing checks will be added as a separate change.
Signed-off-by: NJeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add a new object for shared test utilities
Signed-off-by: NJeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This change adds the first kunit test for the mctp subsystem, and an
initial test for the fragmentation path.

We're adding tests under a new net/mctp/test/ directory.

Incorporates a fix for module configs:
Reported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: NJeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

1. Removed driver specific extra params like download_region,
   address & region_count. The required information is passed
   as part of flash API.
2. IOSM Devlink documentation updated to reflect the same.
Signed-off-by: NM Chetan Kumar <m.chetan.kumar@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jakub Kicinski says:

====================
Use netdev->dev_addr write helpers (part 1)

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

This is the first installment of predictably tedious conversion.
It tackles:

  memcpy(netdev->dev_addr, something, ETH_ADDR)

and

  ether_addr_copy(netdev->dev_addr, something)

replacing both with eth_hw_addr_set().

The first 7 patches are done entirely by sparse.
Next 4 were semi-manual because the sparse conversion
resulted in errors.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

eth_hw_addr_set() takes a u8 pointer, like other
etherdevice helpers. Convert the few drivers which
require casts because they memcpy from "endian marked"
types.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert from memcpy(), include is needed.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Manual conversions because we need to get to the member
which is inside an array to have a u8 pointer which
eth_hw_addr_set() expects.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert chelsio drivers from memcpy() and ether_addr_copy()
to eth_hw_addr_set(). They lack includes.
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Convert net/usb from ether_addr_copy() to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - ether_addr_copy(dev->dev_addr, np)
  + eth_hw_addr_set(dev, np)
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert Ethernet from ether_addr_copy() to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - ether_addr_copy(dev->dev_addr, np)
  + eth_hw_addr_set(dev, np)
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert from ether_addr_copy() to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - ether_addr_copy(dev->dev_addr, np)
  + eth_hw_addr_set(dev, np)
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Convert usb drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, ETH_ALEN)
  + eth_hw_addr_set(dev, np)
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert all Ethernet drivers from memcpy(... ETH_ADDR)
to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, ETH_ALEN)
  + eth_hw_addr_set(dev, np)
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Convert sw drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, ETH_ALEN)
  + eth_hw_addr_set(dev, np)
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Commit 406f42fa ("net-next: When a bond have a massive amount
of VLANs...") introduced a rbtree for faster Ethernet address look
up. To maintain netdev->dev_addr in this tree we need to make all
the writes to it got through appropriate helpers.

Convert misc arch drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set():

  @@
  expression dev, np;
  @@
  - memcpy(dev->dev_addr, np, ETH_ALEN)
  + eth_hw_addr_set(dev, np)
Signed-off-by: NJakub Kicinski <kuba@kernel.org>
Acked-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Vladimir Oltean says:

====================
Egress VLAN modification using VCAP ES0 on Ocelot switches

This patch set adds support for modifying a VLAN ID at the egress stage
of Ocelot/Felix switch ports. It is useful for replicating a packet on
multiple ports, and each egress port sends it using a different VLAN ID.

Tested by rewriting the VLAN ID of both
(a) packets injected from the CPU port
(b) packets received from an external station on a front-facing port

Adding a selftest to make sure it doesn't bit-rot, and if it does, that
it can be traced back easily.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

For this test we are exercising the VCAP ES0 block's ability to match on
a packet with a given VLAN ID, and push an ES0 TAG A with a VID derived
from VID_A_VAL plus the classified VLAN.

$eth3.200 is the generator port
$eth0 is the bridged DUT port that receives
$eth1 is the bridged DUT port that forwards and rewrites VID 200 to 300
      on egress via VCAP ES0
$eth2 is the port that receives from the DUT port $eth1

Since the egress rewriting happens outside the bridging service, VID 300
does not need to be in the bridge VLAN table of $eth1.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There will be one more VLAN modification selftest added, this time for
egress. Rename the one that exists right now to be more specific.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Looks like when I wrote the selftests I was using a network manager that
brought up the ports automatically. In order to not rely on that, let
the script open them up.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, all packets injected into Ocelot switches are classified to
VLAN 0, regardless of whether they are VLAN-tagged or not. This is
because the switch only looks at the VLAN TCI from the DSA tag.

VLAN 0 is then stripped on egress due to REW_TAG_CFG_TAG_CFG. There are
2 cases really, below is the explanation for ocelot_port_set_native_vlan:

- Port is VLAN-aware, we set REW_TAG_CFG_TAG_CFG to 1 (egress-tag all
  frames except VID 0 and the native VLAN) if a native VLAN exists, or
  to 3 otherwise (tag all frames, including VID 0).

- Port is VLAN-unaware, we set REW_TAG_CFG_TAG_CFG to 0 (port tagging
  disabled, classified VLAN never appears in the packet).

One can already see an inconsistency: when a native VLAN exists, VID 0
is egress-untagged, but when it doesn't, VID 0 is egress-tagged.

So when we do this:
ip link add br0 type bridge vlan_filtering 1
ip link set swp0 master br0
bridge vlan del dev swp0 vid 1
bridge vlan add dev swp0 vid 1 pvid # but not untagged

and we ping through swp0, packets will look like this:

MAC > 33:33:00:00:00:02, ethertype 802.1Q (0x8100): vlan 0, p 0,
	ethertype 802.1Q (0x8100), vlan 1, p 0, ethertype IPv6 (0x86dd),
	ICMP6, router solicitation, length 16

So VID 1 frames (sent that way by the Linux bridge) are encapsulated in
a VID 0 header - the classified VLAN of the packets as far as the hw is
concerned. To avoid that, what we really need to do is stop injecting
packets using the classified VLAN of 0.

This patch strips the VLAN header from the skb payload, if that VLAN
exists and if the port is under a VLAN-aware bridge. Then it copies that
VLAN header into the DSA injection frame header.

A positive side effect is that VCAP ES0 VLAN rewriting rules now work
for packets injected from the CPU into a port that's under a VLAN-aware
bridge, and we are able to match those packets by the VLAN ID that was
sent by the network stack, and not by VLAN ID 0.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The VLAN TCI contains more than the VLAN ID, it also has the VLAN PCP
and Drop Eligibility Indicator.

If the ocelot driver is going to write the VLAN header inside the DSA
tag, it could just as well write the entire TCI.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the ocelot driver does support the 'vlan modify' action, but
in the ingress chain, and it is offloaded to VCAP IS1. This action
changes the classified VLAN before the packet enters the bridging
service, and the bridging works with the classified VLAN modified by
VCAP IS1.

That is good for some use cases, but there are others where the VLAN
must be modified at the stage of the egress port, after the packet has
exited the bridging service. One example is simulating IEEE 802.1CB
active stream identification filters ("active" means that not only the
rule matches on a packet flow, but it is also able to change some
headers). For example, a stream is replicated on two egress ports, but
they must have different VLAN IDs on egress ports A and B.

This seems like a task for the VCAP ES0, but that currently only
supports pushing the ES0 tag A, which is specified in the rule. Pushing
another VLAN header is not what we want, but rather overwriting the
existing one.

It looks like when we push the ES0 tag A, it is actually possible to not
only take the ES0 tag A's value from the rule itself (VID_A_VAL), but
derive it from the following formula:

ES0_TAG_A = Classified VID + VID_A_VAL

Otherwise said, ES0_TAG_A can be used to increment with a given value
the VLAN ID that the packet was already classified to, and the packet
will have this value as an outer VLAN tag. This new VLAN ID value then
gets stripped on egress (or not) according to the value of the native
VLAN from the bridging service.

While the hardware will happily increment the classified VLAN ID for all
packets that match the ES0 rule, in practice this would be rather
insane, so we only allow this kind of ES0 action if the ES0 filter
contains a VLAN ID too, so as to restrict the matching on a known
classified VLAN. If we program VID_A_VAL with the delta between the
desired final VLAN (ES0_TAG_A) and the classified VLAN, we obtain the
desired behavior.

It doesn't look like it is possible with the tc-vlan action to modify
the VLAN ID but not the PCP. In hardware it is possible to leave the PCP
to the classified value, but we unconditionally program it to overwrite
it with the PCP value from the rule.
Signed-off-by: NVladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Add missing clock-names property,
  - Add example compatible values for PHY subnode.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

- Drop unneeded interrupt-parent,
  - Convert to new style CPG/MSSR bindings,
  - Add missing power-domains and resets properties,
  - Update PHY subnode:
      - Add example compatible values,
      - Add micrel,led-mode and reset-gpios examples.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NNiklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

napi_gro_complete always returned the same value, NET_RX_SUCCESS
And the value was not used anywhere
Signed-off-by: NGyumin Hwang <hkm73560@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Shannon Nelson says:

====================
ionic: housekeeping updates

These are a few changes for code clean up and a couple
more lock management tweaks.

v2: rebased
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Add the lif parameter for use in an error message, and
to better match the style of most of the functions calls.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Simplify the code a little by keeping the send_to_hw decision
inside of ionic_qcq_disable rather than in the callers.  Also,
add ENXIO to the decision expression.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Split the adminq wait into smaller polling periods in order
to watch for broken firmware and not have to wait for the full
adminq devcmd_timeout.

Generally, adminq commands take fewer than 2 msecs.  If the
FW is busy they can take longer, but usually still under 100
msecs.  We set the polling period to 100 msecs in order to
start snooping on FW status when a command is taking longer
than usual.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Widen the coverage of the queue_lock to be sure the lif init
and lif deinit actions are protected.  This addresses a hang
seen when a Tx Timeout action was attempted at the same time
as a FW Reset was started.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move creation and deletion of lif mutex a level out to
lif creation and delete, rather than in init and deinit.
This assures that nothing will get hung if anything is waiting
on the mutex while the driver is clearing the lif while handling
the fw_down/fw_up cycle.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If the PCI connection is broken, reading the FW version string
will only get 0xff bytes, which shouldn't get printed.  This
checks the first byte and prints only the first 4 bytes
if non-ASCII.

Also, add a limit to the string length printed when a valid
string is found, just in case it is not properly terminated.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These debug stats are not really useful, their collection is
likely detrimental to performance, and they suck up a lot
of memory which never gets used if no one ever enables the
priv-flag to print them, so just remove these bits.
Signed-off-by: NShannon Nelson <snelson@pensando.io>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>