“737f2e93b9724a3554f9d0b248c22cd407313f86”上不存在“README.md”
- 26 9月, 2008 15 次提交
-
-
由 Alexey Kopytko 提交于
This patch adds support for Buffalo Linkstation Mini board. Signed-off-by: NAlexey Kopytko <alexey@kopytko.ru> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Ronen Shitrit 提交于
Feroceon L2 cache can work in eighther write through or write back mode on Kirkwood. Add the option to configure this mode according to Kconfig. Signed-off-by: NRonen Shitrit <rshitrit@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Albert Aribaud 提交于
This patch provides standard GPIO LED control for the ED Mini V2, with software blinking only (CPLD hardware blinking capability is not used). This patch also provides status of the power button as a standard GPIO input event. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Lennert Buytenhek 提交于
Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Ronen Shitrit 提交于
Remove uart1 init calls for boards that use the physical pins onto which the UART1 signals are multiplexed for different purposes. Signed-off-by: NRonen Shitrit <rshitrit@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Ronen Shitrit 提交于
Add support to the Kirkwood port for newer device models and silicon revisions. Instead of looking at the DEVICE_ID register, the device version is now determined by looking at the PCI-Express device ID and revision registers, as it is done for orion5x, and this information is used to determine the TCLK frequency, again, as it is done for orion5x. Signed-off-by: NRonen Shitrit <rshitrit@marvell.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Ronen Shitrit 提交于
Currently, kirkwood uses a hardcoded timer tick rate of 166 MHz, but the actual timer tick rate varies between different members of the SoC family. This patch prepares for runtime determination of the timer tick rate. Signed-off-by: NRonen Shitrit <rshitrit@marvell.com>
-
由 Lennert Buytenhek 提交于
The RD88F6183AP-GE is an access point reference design for the 88F6183 SoC, with a 88E6161 six-port gigabit ethernet switch with five PHYs (providing 1 WAN and 4 LAN ports and an interface to the CPU), and a mini-PCIe slot for a wireless card. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
The Orion-1-90 (88F6183) is another member of the Orion SoC family, which has a 16 bit DDR2 interface, one x1 PCIe port (configurable as Root Complex or Endpoint), one 10/100/1000 ethernet interface, one USB 2.0 port with PHY, one SPDIF/I2S interface, one SDIO interface, one TWSI interface, two UARTs, one SPI interface, a NAND controller, a crypto engine, and a 4-channel DMA engine. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Sylver Bruneau 提交于
This patch adds support for the Buffalo Terastation Pro II/Live. Signed-off-by: NSylver Bruneau <sylver.bruneau@googlemail.com> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Christopher Moore 提交于
This patch adds support for the LaCie Ethernet Disk mini V2. Signed-off-by: NAlbert Aribaud <albert.aribaud@free.fr> Signed-off-by: NChristopher Moore <moore@free.fr> Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Currently, orion5x uses a hardcoded timer tick rate of 166 MHz, but the actual timer tick rate varies between different members of the SoC family (and can vary based on strap pin settings). This patch prepares for runtime determination of the timer tick rate. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Wire up the ethernet port's error interrupt so that the mv643xx_eth driver can sleep for SMI event completion instead of having to busy-wait for it. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com> Signed-off-by: NNicolas Pitre <nico@marvell.com>
-
由 Lennert Buytenhek 提交于
Wire up the ethernet port's error interrupt so that the mv643xx_eth driver can sleep for SMI event completion instead of having to busy-wait for it. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
由 Lennert Buytenhek 提交于
Wire up the ethernet port's error interrupt so that the mv643xx_eth driver can sleep for SMI event completion instead of having to busy-wait for it. Signed-off-by: NLennert Buytenhek <buytenh@marvell.com>
-
- 25 9月, 2008 1 次提交
-
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 24 8月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch lets the files using linux/version.h match the files that #include it. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 21 8月, 2008 1 次提交
-
-
由 Mike Rapoport 提交于
Fix arch/arm/mach-pxa/pxa300.c:94: error: 'CKEN_MMC3' undeclared here (not in a function) when building for PXA300. Signed-off-by: NMike Rapoport <mike@compulab.co.il> Acked-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 19 8月, 2008 1 次提交
-
-
由 Tomasz Chmielewski 提交于
This patch against 2.6.27-rc3 does the following changes to FSG-3 setup code: 1) Enable RTC on FSG-3 (proper name is needed). This change is needed due to a recent change in i2c. 2) i variable is only used when compiling for big endian. So move its declaration to ARMEB ifdef to silence the warning when compiling for LE. Mailing list link: http://lists.arm.linux.org.uk/lurker/message/20080813.091556.cae2917e.en.htmlSigned-off-by: NTomasz Chmielewski <mangoo@wpkg.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 18 8月, 2008 1 次提交
-
-
由 Russell King 提交于
CC arch/arm/mach-integrator/impd1.o arch/arm/mach-integrator/impd1.c: In function `impd1_probe': arch/arm/mach-integrator/impd1.c:408: warning: too few arguments for format Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 17 8月, 2008 1 次提交
-
-
由 Adrian Bunk 提交于
This patch removes CVS keywords that weren't updated for a long time. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 8月, 2008 3 次提交
-
-
由 Eric Miao 提交于
Another fix of inconsistent shift of the LCD_BIAS_ACTIVE_* and LCD_PCLK_EDGE_* is also included. Signed-off-by: NEric Miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Nicolas Pitre 提交于
With gcc 4.3 and later, a pointer that has already been dereferenced is assumed not to be null since it should have caused a segmentation fault otherwise, hence any subsequent test against NULL is optimized away. Current inline asm constraint used in the implementation of prefetch() makes gcc believe that the pointer is dereferenced even though the PLD instruction does not load any data and does not cause a segmentation fault on null pointers, which causes all sorts of interesting results when reaching the end of a linked lists for example. Let's use a better constraint to properly represent the actual usage of the pointer value. Problem reported by Chris Steel. Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 15 8月, 2008 1 次提交
-
-
由 Huang Ying 提交于
Rename KEXEC_CONTROL_CODE_SIZE to KEXEC_CONTROL_PAGE_SIZE, because control page is used for not only code on some platform. For example in kexec jump, it is used for data and stack too. [akpm@linux-foundation.org: unbreak powerpc and arm, finish conversion] Signed-off-by: NHuang Ying <ying.huang@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 8月, 2008 1 次提交
-
-
由 Felipe Balbi 提交于
Use platform_data to pass musb configuration-specific details to musb driver. This patch will prevent that other platforms selecting HAVE_CLK and enabling musb won't break tree building. The other parts of it will come when linux-omap merge up more omap2/3 board-files. Signed-off-by: NFelipe Balbi <felipe.balbi@nokia.com> Acked-by: NPaul Mundt <lethal@linux-sh.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 13 8月, 2008 8 次提交
-
-
由 Nicolas Pitre 提交于
Signed-off-by: NNicolas Pitre <nico@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
... otherwise these fail to build. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Paul Walmsley 提交于
Commit 2ccdd1e7 doesn't add v7wbi_possible_flags and v7wbi_always_flags to possible_tlb_flags and always_tlb_flags. This causes the L2 cache flush in clean_pmd_entry() (intended for Feroceon only) to execute on ARMv7, and the CPU hangs. This patch is required for OMAP3 boards to boot. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Acked-by: NLennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Stefan Schmidt 提交于
Setup some missing syscall pointed out by the checksyscalls.sh script. Fix two small whitespace issues while being there. Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Calling the undefined instruction handler functions with a spinlock held is a recipe for must_sleep() warnings. Avoid it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Dmitry Baryshkov 提交于
Fix Poodle ASoC compilation by providing Poodle LoCoMo GPIO names. Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: NDmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Ian Molton 提交于
This patch updates e400 to use the new MFP GPIO setup code. Signed-off-by: NIan Molton <spyro@f2s.com>
-
由 Ian Molton 提交于
This patch updates e740 to use the new MFP GPIO setup code. Signed-off-by: NIan Molton <spyro@f2s.com>
-
- 12 8月, 2008 4 次提交
-
-
由 Ian Molton 提交于
The max IRQ is too small for all e-series machines which have at least one GPIO expander chip in them. Signed-off-by: NIan Molton <spyro@f2s.com>
-
由 Ian Molton 提交于
This patch removes the hardcoded alias array from pxa25x.c and reimplements its functionality using the new clock alias call. Signed-off-by: NIan Molton <spyro@f2s.com>
-
由 Ian Molton 提交于
This patch allows dynamic creation of clock aliases in order to make it possible to have platform independent clock names for use in device drivers. Signed-off-by: NIan Molton <spyro@f2s.com>
-
由 Ian Molton 提交于
Signed-off-by: Ian Molton
-
- 10 8月, 2008 2 次提交
-
-
由 Russell King 提交于
Convert the existing dma_sync_single_for_* APIs to the new range based APIs, and make the dma_sync_single_for_* API a superset of it. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
OMAP at least gets the return type(s) for the DMA translation functions wrong, which can lead to subtle errors. Avoid this by moving the DMA translation functions to asm/dma-mapping.h, and converting them to inline functions. Fix the OMAP DMA translation macros to use the correct argument and result types. Also, remove the unnecessary casts in dmabounce.c. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-